Starting Aperture on a new comuter

Hi !
I have restored my configuration from Time Machine onto a new iMac following the death of my MacBook. Aperture is prompting me for the serial number of my installation CD. I can't find the original package. Is there a way to retrieve it or by-pass this stage ?
Thank you

Do you have Aperture on a second Mac installed? Then you can see the serial number in the About panel; from the main menu bar select:
Aperture > About Aperture
If you cannot find the Serial number, you will have to contact Apple with a proof of purchase,
see these links:
Pro Application Replacement Serial Numbers: http://support.apple.com/kb/HT1861
Troubleshooting Professional Application Serial Numbers:
http://support.apple.com/kb/TS2005
Regards
Léonie

Similar Messages

I have bought a new pc, and i want to move adobe lightroom frome my old computer to my new comuter.

I have bought a new computer and I want to move adobe lightroom frome my old computer to my new computer, how do I do this?

thank you
Date: Tue, 18 Jun 2013 12:14:18 -0700
From: [email protected]
To: [email protected]
Subject: I have bought a new pc, and i want to move adobe lightroom frome my old computer to my new comuter.
    Re: I have bought a new pc, and i want to move adobe lightroom frome my old computer to my new comuter.
    created by Tom Hogarty in Photoshop General Discussion - View the full discussion
This is a fairly in-depth tutorial on moving from one computer to another.(I recommend Option 1)
http://www.lightroomqueen.com/2009/02/28/how-do-i-move-lightroom-to-a- new-computer/
Also, there's no need to find the original disk for installation. Just download the latest update of your purchased version from here: http://www.adobe.com/downloads/updates/ and user your original serial number.
Regards,
Tom Hogarty
Adobe Systems
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5422074#5422074
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5422074#5422074
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5422074#5422074. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Aperture creates a new version every time i apply a new adjustment!!!

1.5.6. is my aperture version. and recently it started to create a new version every time i apply a new adjustment. It's not the biggest bother for a couple of images, but for documenting a whole event with 300 images...well that might be a... mighty issue! How do I get this to stop? Any ideas?

Preferences->General->Create new versions when making adjustments.
Uncheck it

Empty Photostream Projects of old months appears when starting Aperture

Hi all,
my Photostream is not working very well with aperture. I used to work with iPhoto. With changing to Aperture i am still using the same library.
Now when im starting Aperture, there are always new Projects with the title "Photostream August" and "Photostream Octobre". But there are no Photos inside! Link: http://www.flickr.com/photos/97116580@N03/sets/72157637727530316
I tried to delete the projects, tried to merge them with other projects. Didnt work. I also turned Photostream off and on again. But the projects still exists after restart Aperture.
Can somebody help in this case?
Thanks a lot. Best Regards!

These projects are created by the automatic photo stream import. That is one of the glitches, that occasionally has been observed, when automaic import has been enabled. If you want to avoid these zombie project set the import to manual import. Only, then you will have to remember to import your photos once a month.

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?
Like others, I have recently upgraded my MacBook Pro to the next generation and migrated all my information from old to new. Everything works seamlessly EXCEPT Acrobat. Photoshop, Indesign, Bridge and Lightroom all seem functional. Acrobat hangs with an error message "Suite Product Activation Needed. Acrobat was installed as part of a suite. To enable Acrobat, please start another element of the suite (such as Photoshop)." Needless to say, starting another element of the suite has NO impact on Acrobat.
This has to be a common problem. Now that Apple has made it really easy to migrate information from old to new machines, it has to come up all the time. What surprises me greatly is that I can't find any coherent answer in these forums.
So how do I get Acrobat running again?

Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert

TS2570 On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

HT4007 How can I get Aperture onto my new Macbook Pro 15" Retina that DOESN'T have a superdrive from my 5 year old Macbook Pro? I still have the CD and serial number for Aperture. HELP! PLEASE!!

Like the thread topic says. I need help getting Aperture onto my new macbook pro that does not have a drive. I have no need for a drive after this to be honest just need my programs back on it. Thanks.

Two options:
Make a disk image or a clone of the installer CD on your Mac that has a super drive - you can create a disk image using Disk Utility or use Carbon Copy Cloner (if you have it) to clone the DVD to a thumbsdrive. Then run the installer on your MBY from this copy.
Or download the Trial Installer and install from there:
Download the Aperture 3.1 Trial. http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Open the Aperture Trial disc image.
Double-click the "Aperture Trial.mpkg" file.
Follow the onscreen instructions to install Aperture.
After the installation completes, choose Software Update from the Apple () menu.
Install the Aperture 3.4 update from the list of available updates.
Regards
Léonie

I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed. No other programs have similar problem. Any suggestion what can be done?

I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

HT1414 Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

Can anyone help me? I just want to know if I just put my iPhone 4 which has been fixed can I start it as a new phone and still have my contacts and photos as it won't let me log in with my iCloud address

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Fusion VM (Windows) won't start after migration to new Mac

Friends,
I just bought a new MacBook Pro, onto which I have migrated my old Mac. I had Windows 7 installed as a VM on the old Mac, but when I try to start it on the new machine I get no response. Fusion starts and I see the black screen with the "PLAY" icon, but clicking on it does nothing.
Is this due to a change in my system's environmental variables? I know, for instance, that the name of the partition on the new MacBook is different to the name on the old Mac. Where/how would I correct for this on the Mac or in Fusion?
Thank you

Windows in VM is going to know it's on a different machine, so you'll still have to hop through Microsoft's hoops or you won't get updates.
Just an FYI: when moving a Fusion virtual machine, the first time you run the virtual machine, you are prompted if you "moved it" or "copied it". Selecting "moved it" will retain the UUID and prevent Windows from prompting for reactivation. (However, if it is a copy of the virtual machine and you wanted to run both copies simultaneously on the same network, you must select "copied it" otherwise the copies can't run at the same time.)
If one did select "copied it" accidentally, then just follow the reactivation prompts. As long as you're not reactivating a lot then it usually will work the normal way over the internet. Even if you're forced to call, just tell the support rep that you're reinstalling Windows and type in the really long code that they say. The few times I've had to call, it was less than 15 minutes. Again, as long as you're not reactivating a lot (so looking suspiciously like a pirate,) reactivation is a pain, but relatively quick.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Why can't I create a new version of a photo edited in an external application, without Aperture making a new copy of the newly created Tiff?

When Aperture creates a new version from a RAW file, no new master file is created. This makes total sense and I understand why.
When I edit a photo in an external editor (Photoshop CS6) from within Aperture, Aperture creates a Tiff file to edit in Photoshop and saves it along with the RAW original once I have finished editing it in Photoshop. I understand why this is necessary too. So far so good.
But if I then ask Aperture to create a new version from the newly created image edited via Photoshop, it creates another new Tiff. I can't see why this is necessary. Aperture should be able to apply further new Aperture edits to the newly created Tiff in the same way that it creates new versions from a RAW file without duplicating the master - by remembering any new 'recipe' changes applied to the Tiff. It only needs to remember the edits made as the Tiff already now exists.
Can I stop it creating repeat Tiff files each time I create a new version from the Photoshoped photos?
Thanks in anticipation.

Hello Kirby,
I clicked on the 'Show in Finder' and it revealed a new file called IMG_0961 (1) which goes with the original IMG_0961.CR2 and the edited new tiff created for Photoshop which was called IMG_0961.tiff
I noticed also that a separate version I had previously created using Canon's DPP stand alone software and titled by me IMG_0961 (DPP).TIF (same thing but from a different original) does not form a new master file when I create a new version of that one. I've tried this with a few images but when the original is edited in Photoshop via Aperture a second version of the Tiff is created for the 1st version of the image when I create a new version fo it.

What is the best way to import photos from aperture to my new Lightroom

What is the best way to import photos from aperture to my new Lightroom ?

See if this helps
http://lightroomsolutions.com/articles/migrating-from-aperture-to-lightroom-where-do-i-beg in/

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?

SamanthaR22 wrote:
How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder? [Emphasis added.]
The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with. "Picture" and "Photo" now mean different things in different contexts. In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do. Understanding is the path that allows us to do it.
All pedantic, but please stick with me here .
You record a set of instantaneous data with a camera.
That data is processed by your camera and saved to a file.
The file format is usually either RAW or JPG.
You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
Aperture links the Image and the imported file.
The imported file is called, within Aperture, an Original.
Every Image has an Original.
The Image is not the Original. The Image is what you see in Aperture.
The Original is a file that is stored on your computer.
You can make changes to an Image.
Aperture calls these changes Adjustments.
Adjustments are saved to another file attached to the record in the database. Let's call this file the Changes File.
Aperture uses these two files attached to the record in the database to create the Image.
Image = Original + Changes File.
The Image is not a file.
Because the Image is not a file, it cannot be shared with other programs. It exists only inside of Aperture.
In order to share an Image with another program, you must first create a file of the Image.
You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
You may ask, "Why all the complexity? Why doesn't Aperture save Images as files?" The answer is simple: Images can require less — and in many cases very very much less — storage space than files of Images. Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file. The gain in storage efficiency is huge. The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
Here is your question reworded with more precise terms:
SamanthaR22 might have written:
How do I access Images in my Aperture Library in the Finder? I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
No, there is not. Images exist only in Aperture, and are not accessible for use in other programs. You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
Aperture does allow you to create and save within your Library share-able files of your Images. These files are called Previews. You specify the file parameters in Aperture Preferences on the Previews tab. These files are available to other programs via the OS X Media Browser. These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
HTH.
—Kirby.

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

Starting Aperture on a new comuter

Similar Messages

Maybe you are looking for