Starting Calendar service hangs server

Hi.
I have been using wikis on 10.8.2 for a few month now and wanted to add a calendar function. runing the server app and flicking the on switch to turn it on causes the server to be come unresponsive.
Mouse goes very jerky and cant click anything
i cant ping the mac from another machine (can before hang)
wiki no longer responds
i have to hard power off/on. upon boot and running the server app the calendar service is set back to off. i dont see anything in the logs at all.
any ideas?

I built a fresh server and did the same.
Its in a VMware fusion environment so maybe its that? will try on ESX box

Similar Messages

SQL Server Analysis Services not showing in Services on Server on Central Admin

Hi All
We have a Sharepoint 2013 farm set up (2xApp, 2xWeb, 1xSQL) and we have a number of excel powerpivot workbooks deployed and refreshing.
This was all working fine, until recently when our Excel 2013 Tabular workbooks stopped refreshing manually. This had worked fine in the past, but now is giving the following error:
"An error occurred during an attempt to establish a connection to the external data source"
The first thing I wanted to check was that the "SQL Server Analysis Services" was started in Services on Server within Central Admin. However when i navigated to check this, I noticed that the service was no longer listed at all.
I checked the Analysis services for Powerpivot is running on the server and it is registered within Data Models on Excel services.
There was recently some Windows updates that were applied to the servers, but i'm pretty confident that the refresh was working after these, however i cant rule out 100%.
Hoping for any advice on what I can check/do here?
Thanks!

When i try to run that tool i actually get a strange error (we are running Enterprise Edition):
"PowerPivot for SharePoint 2013 Configuration is missing prerequisites: SharePoint 2013 Enterprise Edition is required.
For more information go to http://go.microsoft.com/fwlink/?LinkId=247828.
Please address the validation failures and try again."
Yes it looks like on the server hosting PowerPivot analysis server that a number of windows updates got applied. However
none look to be specifically about for SQL, and the 2 cumulative ones are for IE and Active X for Windows Server.

Updating OS X server 4.0 hangs at 'preparing calendar service'

Hi, kindly help me.. I have OS X Server 4.0 update; I went thru the normal process of updating but the process hangs at 'Preparing calendar service'. My operating system is: OS X Yosemite

Move the Calendar service data aside temporarily so that the migration will finish, then see below.
caldavd failing to start after upgrade to Server

Server install hangs at calendar services

I performed a fresh install of OSX Server following issues with upgrading to version 4.0.3. Even with a fresh install, the server hangs on "Preparing Calendar Services," and won't move beyond it. Any ideas?

Hi
You may find following the steps outlined in the 'answer' on this thread helps fix your problem. The step (to kill one process running during the install sequence) is a lot less invasive than doing clean builds and so on.
Hope it helps.

Contacts and Calendar Services doesn't start

After upgrading from Lion Server to Mavericks all seem to works except Contacts and Calendar. I can not start both services from the Server.app and neither from the Terminal.
servidor:~ admin$ sudo serveradmin start calendar
calendar:readWriteSettingsVersion = 1
calendar:setStateVersion = 1
calendar:state = "STOPPED"
calendar:contactsState = "STOPPED"
calendar:calendarState = "STOPPED"
servidor:~ admin$ sudo serveradmin start contacts
contacts:error = "CANNOT_LOAD_BUNDLE_ERR"
servidor:~ admin$
This are the logs
19/07/14 07:09:37,134 com.apple.launchd[1]: (org.calendarserver.calendarserver[34005]) Exited with code: 1
error.log:
Reading configuration from file: /Applications/Server.app/Contents/ServerRoot/private/etc/caldavd/caldavd-apple. plist
Neither EnableCalDAV nor EnableCardDAV are set to True.
migration.log
2014-07-18 23:20:14+0100 received postgres stdout '2014-07-18 23:20:14 XPG.8756: Executing pg_ctl [\'/Applications/Server.app/Contents/ServerRoot/usr/bin/pg_ctl\', \'-p\', \'/Applications/Server.app/Contents/ServerRoot/usr/bin/xpostgres\', \'start\', \'-l\', \'/var/log/caldavd/xpg_ctl.log\', \'-w\', \'-o\', "-c listen_addresses=\'\' -k \'/var/run/caldavd/PostgresSocket\' -c shared_buffers=75 -c max_connections=50 -c standard_conforming_strings=on -c unix_socket_permissions=0770 -c log_lock_waits=TRUE -c deadlock_timeout=10 -c log_line_prefix=\'%m [%p] \' -c logging_collector=on -c log_truncate_on_rotation=on -c log_directory=/var/log/caldavd/postgresql -c log_filename=postgresql_%w.log -c log_rotation_age=1440"]\n2014-07-18 23:20:14 XPG.8756: Spawning... [\'/Applications/Server.app/Contents/ServerRoot/usr/bin/pg_ctl\', \'-p\', \'/Applications/Server.app/Contents/ServerRoot/usr/bin/xpostgres\', \'start\', \'-l\', \'/var/log/caldavd/xpg_ctl.log\', \'-w\', \'-o\', "-c listen_addresses=\'\' -k \'/var/run/caldavd/PostgresSocket\' -c shared_buffers=75 -c max_connections=50 -c standard_conforming_strings=on -c unix_socket_permissions=0770 -c log_lock_waits=TRUE -c deadlock_timeout=10 -c log_line_prefix=\'%m [%p] \' -c logging_collector=on -c log_truncate_on_rotation=on -c log_directory=/var/log/caldavd/postgresql -c log_filename=postgresql_%w.log -c log_rotation_age=1440"]\n'
servermgr_calendar.log
[cal] 19/07/14 07:40:21 GMT+2 : EnableCalDAV = 0
[cal] 19/07/14 07:40:21 GMT+2 : CalDAV = {
Someone may help me?. Do you need more logs?

Back up all files.
Quit the Server application and drag it to the Trash, but don't empty. You'll be prompted to confirm that you want to stop all services. You won't lose any server data.
Put the app back where it was and launch it. Test.

Error Starting Calendar Server

I have OCV2 installed on Solaris 8 and I am getting the following error in cws.log when I try to start the calendar server.
./unistart
unistart: Oracle Calendar Server 9.0.4
unistart: Copyright (c) 1993, 2003, Oracle.
unistart: All rights reserved.
unistart:
unistart: The Calendar Directory Access Server is already started.
unistart: The Calendar Lock Manager is already started.
unistart: The Calendar Engine is already started.
unistart: The Calendar Synchronous Network Connections is already started.
unistart: Starting the Calendar Corporate-Wide Services
unistart [error]: Error starting the Calendar Corporate-Wide Services
unistart [error]: More details can be found in '/oracle/middle/ocal/log/unistart.log'
unistart [error]: and in '/oracle/middle/ocal/log/cws.log'
DATE = Tue Aug 19 16:58:38 2003
PID = 1794; TID = 1; LWPID = 1
unicwsd version: A.09.00
DATE = Tue Aug 19 16:58:38 2003
PID = 1794; TID = 1; LWPID = 1
SYSTEM ERRNO -> 22 (Invalid argument)
ERROR CODE -> 0x50109
FUNCTION NAME -> ProcessDefaultMain
SIS_SharedMemLockedCreate error: CreateSystemV: shmget error :22,Invalid argument. size:28 mo
de:1920 key:50491296
DATE = Tue Aug 19 16:58:38 2003
PID = 1794; TID = 1; LWPID = 1
SYSTEM ERRNO -> 22 (Invalid argument)
ERROR CODE -> 0x50109
FUNCTION NAME -> main
ProcessDefaultMain
Has anybody had this problem before ?

Bonjour,
This problem seems to be related to your Kernel parameter.
At this point I would suggest to contact Oracle Support and open a TAR with the calendar group.
Thank you,
Manon Delisle

Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

Hello!
I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message:
Error container , type 0
Event name: AppHangXProcB1
Reply: No data
Ident CAB: 0
Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16446
P3: 4fb57c8f
P4: 77c1
P5: 131200
P6: svchost.exe:AudioClientRpc
P7: 0.0.0.0
P8:
P9:
P10:
shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events.
Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
but it is impossible for the "Remote Audio" device.
At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
to an older version of Skype, but I would like to solve the problem completely.

Enable the Allow audio and video playback redirection Group Policy setting
To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
Console (GPMC).
For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
Is this policy applied? Refer:
http://technet.microsoft.com/en-us/library/dd759165.aspx
Also, have you tried update the audio device driver for this terminal server?

OS X Server 4.0 Calendar Service only available on local network

I have a mac mini (late 2014) running yosemite 10.10.1 and installed OS X Server 4. I set the server up to run over the internet using a domain name that points to my external ip address.
I have the DNS, users, groups, and open directory configured and started setting up the services. File sharing, Contacts and Calendar all worked great until I tried to set up Messages. I had a problem getting my accounts set up on the client machines. However, the real issue is that the services that worked great had the access status changed from available over the internet at "my.domain" to available on local server.
I have tried many things and I have all the services except one as showing as reachable or available over the internet. Calendar shows as available on your local network, which is not what I want. How can some services be available over the internet and one other not?
In addition the services that are running, randomly change status between only available locally and available over the internet without changing anything in there server app.

jepping,
thanks for the reply. Here is the screen shot you asked for....
This is exactly the same as when all my services worked fine. I tried adding calendar from this section but if I select 'all users' and 'all networks' the 'OK' button is greyed out. So I restricted the users to those in a group of mine. This is the screen shot now.
I went to the calendar service to turn it off then on and the access service is still 'available on your local network at server.local
Thanks.

Update to 4.0.3 hangs on "Updating Calendar Service"

Trying to update Server to version 4.0.3 on Mac Mini running 10.10.1. Breezes through most of the update but hangs on "Updating Calendar Service", left running overnight, no change. Force Quit, restarted computer and retried update, but the same issue occurred. I don't even use the Calendar Service, not sure how to move forward with this.

Hi
You may find following the steps outlined in the 'answer' on this thread helps fix your problem.
Hope it helps.

Unable to get SQL Server 2008 R2 to start SBSMONITORING service

Hi,
I have been fighting with a Windows 2008 se
rver and trying to get the SQL server ( SBSMONITORING ) Working. I have tried to start the service, always getting the error ' The request failed of the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details
'. Upon doing that, i found a few events in the event viewer. I also attempted a repair install ( as to where I can select a database to repair or the whole thing. ) Does anyone have any idea where i should be looking or what I should be doing? I have logs
of the failed repair install also if anyone wants them.. Help please? Also please excuse my noobness, I don't have much experience with SQL server or anything.
Thanks

This is the event viewer information
Faulting application name: sqlservr.exe, version: 2009.100.2500.0, time stamp: 0x4dfb6221
Faulting module name: sqlservr.exe, version: 2009.100.2500.0, time stamp: 0x4dfb6221
Exception code: 0xc0000005
Fault offset: 0x00000000000687f9
Faulting process id: 0x1ea0
Faulting application start time: 0x01cfc70f5f6a388c
Faulting application path: C:\Program Files\Microsoft SQL Server\MSSQL10_50.SBSMONITORING\MSSQL\Binn\sqlservr.exe
Faulting module path: C:\Program Files\Microsoft SQL Server\MSSQL10_50.SBSMONITORING\MSSQL\Binn\sqlservr.exe
Report Id: 9df21a3e-3302-11e4-b861-00155d011601
I am also getting a lot ( i mean, a lot ) of these showing up
The description for Event ID 824 from source MSSQL$MICROSOFT##SSEE cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
incorrect pageid (expected 1:365760; actual 0:0)
read
(1:365760)
5
0x000000b2980000
C:\WSUS\SUSDB\\UpdateServicesDbFiles\SUSDB.mdf
The specified resource type cannot be found in the image file

BSOD when starting MSMQ service as domain user Windows server 2012

Hi
We have a problem with a server getting BSOD when we start a service related to MSMQ. We get the attempted execute of noexecute memory BSOD whenever we start the service as a User on the domain. When we start the service as a system local it starts without
problem. I got the crashdump here:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\170\120314-11828-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: Server, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`48476000 PsLoadedModuleList = 0xfffff800`48742aa0
Debug session time: Wed Dec 3 14:41:01.892 2014 (UTC + 1:00)
System Uptime: 0 days 0:04:09.904
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck FC, {7f982e340e0, 791000010fdb1025, fffff8800485a5e0, 80000005}
Probably caused by : mqac.sys ( mqac!ACCreateQueue+a77 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: 000007f982e340e0, Virtual address for the attempted execute.
Arg2: 791000010fdb1025, PTE contents.
Arg3: fffff8800485a5e0, (reserved)
Arg4: 0000000080000005, (reserved)
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0xFC
PROCESS_NAME: mqsvc.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: fffff8800485a5e0 -- (.trap 0xfffff8800485a5e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000007f982e0c950 rbx=0000000000000000 rcx=0000005dff1fecd0
rdx=0000005dff34e988 rsi=0000000000000000 rdi=0000000000000000
rip=000007f982e340e0 rsp=fffff8800485a778 rbp=fffff8800485ab80
r8=fffffa800e623980 r9=0000000000000521 r10=fffffa800ec547a0
r11=0000000000000006 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
000007f9`82e340e0 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80048661ef1 to fffff800484d0540
STACK_TEXT:
fffff880`0485a408 fffff800`48661ef1 : 00000000`000000fc 000007f9`82e340e0 79100001`0fdb1025 fffff880`0485a5e0 : nt!KeBugCheckEx
fffff880`0485a410 fffff800`48588980 : fffff880`0485a5e0 ffffd8e9`9e6056e2 fffffa80`0ec547a0 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x33f2d
fffff880`0485a450 fffff800`4850aabd : fffff880`0485a500 00000000`c0000016 fffffa80`0e603b00 fffffa80`0e623980 : nt! ?? ::FNODOBFM::`string'+0x33e85
fffff880`0485a4a0 fffff800`484cdfee : 00000000`00000008 00000000`00000000 00000000`00000000 fffff880`0485a5e0 : nt!MmAccessFault+0x3ed
fffff880`0485a5e0 000007f9`82e340e0 : fffff880`00dc5297 fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 : nt!KiPageFault+0x16e
fffff880`0485a778 fffff880`00dc5297 : fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 fffff980`00000000 : 0x000007f9`82e340e0
fffff880`0485a780 fffff880`00dc60d7 : 00000000`00000000 0000005d`ff34e988 00000000`00000000 00000000`00000000 : mqac!ACCreateQueue+0xa77
fffff880`0485a7f0 fffff800`488ab127 : fffffa80`0e5ed520 fffffa80`0d50ecf0 00000000`00000521 00000000`00000000 : mqac!ACDeviceControl+0x62b
fffff880`0485a890 fffff800`488c02f6 : 00000000`00000000 fffff8a0`00000080 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x7e5
fffff880`0485aa20 fffff800`484cf553 : 00000000`00000000 00000000`0000000c fffff6fb`7dbed078 fffff6fb`7da0ff30 : nt!NtDeviceIoControlFile+0x56
fffff880`0485aa90 000007f9`8a702c1a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
0000005d`ff34e928 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007f9`8a702c1a
STACK_COMMAND: kb
FOLLOWUP_IP:
mqac!ACCreateQueue+a77
fffff880`00dc5297 85c0 test eax,eax
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: mqac!ACCreateQueue+a77
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: mqac
IMAGE_NAME: mqac.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc2
IMAGE_VERSION: 6.2.9200.16384
BUCKET_ID_FUNC_OFFSET: a77
FAILURE_BUCKET_ID: 0xFC_mqac!ACCreateQueue
BUCKET_ID: 0xFC_mqac!ACCreateQueue
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xfc_mqac!accreatequeue
FAILURE_ID_HASH: {d1daca31-6256-358c-65b5-69af54392880}
Followup: MachineOwner

Hi,
For BugCheck FC, it indicates that an attempt was made to execute non-executable memory. For more details,
please refer to following article.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
à
whenever we start the service as a User on the domain
. When we start the service as a system local it starts without problem
Did you mean that just use a standard domain user account to start the service, then encounter the issue? If
configure Log on as Local System account, will no BSOD issue occurred? Just a confirmation, thanks for your understanding.
Please check if you install all necessary Windows Updates on the server.
In addition, as you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. However, it is
not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

Mail server log says: master[50]: ERROR: Cannot start mail services...

Recently, after a year or more of relatively smooth service, my OS X Server 10.4.11 Mail services has been locking up daily.
I was finally able to get some information from the log files (I am a noob to this) and saw the following right after my most recent reboot of the server:
Oct 5 09:51:11 mm1 master[50]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/Data/mail/var/imap
I checked the server and that directory is indeed there on the partition named "DATA", so I am baffled as why the server does not thing the configuration directory exists?
drwxr-xr-x 15 cyrusima mail 510 Oct 5 09:51 imap
drwxr-xr-x 15 root admin 510 Oct 3 20:01 imap.BAK
drwxr-xr-x 15 cyrusima mail 510 Oct 3 20:05 imapold10032009-200707
drwxr-xr-x 4 jkoerber admin 136 Dec 3 2007 spool
mm1:/Volumes/Data/mail/var jkoerber$
Can anyone help me? My customers are yelling for blood because they cannot send/receive emails.
-- Jon
Message was edited by: Jon Koerber

Thanks Alex for the feedback. You are helpful as always!
It's good to know that the message I am getting from the mail server about the configuration files is only a temporary thing. Although I find it strange that the mail service doesn't know where its config files are since it is specified in the mail server setup.
I looked at the log files you mentioned and do not see anything that looks like a specific problem with the mail services themselves.
Recently, however, I have been having recurring problems where my mail server and my Web/Database server have both become unresponsive at nearly the same time even though they are on different class A networks to where I cannot access them via ARD, Server Admin and even SSH. That is usually when my mail server goes offline. I was afraid it was because of that configuration error I was seeing, but think now that the problem could be something else entirely (maybe some kind of network problem or denial of service hacking attack, no idea).
Thanks again.
-- Jon

Error while starting managed services on local BIP server

When I am trying to starting managed services on local BIP server then
[aanshulg@indl60109 bin]$ /usr/bin/perl opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=indl60109:9601
Response: 4 of 5 processes started.
ias-instance id=bi_instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=1757041790,pid=5845)
failed to start a managed process after the maximum retry limit
Log:
/home/aanshulg/BIPDomain/instances/instance1/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
[aanshulg@indl60109 bin]$ /usr/bin/perl opmnctl status\
[aanshulg@indl60109 bin]$ /usr/bin/perl opmnctl status
Processes in Instance: bi_instance1
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
coreapplication_obiccs1          | OracleBIClusterCo~ |    5654 | Alive
coreapplication_obisch1          | OracleBIScheduler~ |    5656 | Alive
coreapplication_obijh1           | OracleBIJavaHostC~ |    5655 | Alive
coreapplication_obips1           | OracleBIPresentat~ |     N/A | Down
coreapplication_obis1            | OracleBIServerCom~ |    5652 | Alive
===========================================================================
In log file   console~coreapplication_obips1~1.log
/scratch/software/mw_local/FMWTOOLS_11.1.1.7.0_GENERIC_130327.1838.3_PATCHES4FA_11.1.8.0.0_PLATFORMS_JDK64/aanshulg/mw_home_standalone/bi/bifoundation/web/bin/sawserver: error while loading shared libraries: /scratch/software/mw_local/FMWTOOLS_11.1.1.7.0_GENERIC_130327.1838.3_PATCHES4FA_11.1.8.0.0_PLATFORMS_JDK64/aanshulg/mw_home_standalone/bi/bifoundation/server/bin/libperfapi64.so: unsupported version 24168 of Verneed record
Because of this issue when I am trying to connect the BIP server
I am getting this error
Error
Server not initialized. Please make sure the repository is ready.
Can any body help me in this issue
Thanks in Advance
Best Regards
Anshul

I could see calling to setDomainEnv.cmd script:
*@REM Call setDomainEnv here.*
set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
But in my environment I do not see these variable set to any, JAVA_HOME, DERBY_CLASSPATH, JAVA_OPTIONS, CLASS_PATH.
This might be the issue? Or anything else?

Automate the database and forms / reports services to start on windows 2008 server R2 startup

Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:

Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH

Error will starting calendar server

Hi all,
Can anyone tell me why i am getting an error saying
"Cannot open calendar database"
while starting calendar server.
Thanks in advance..

Bonjour,
This problem seems to be related to your Kernel parameter.
At this point I would suggest to contact Oracle Support and open a TAR with the calendar group.
Thank you,
Manon Delisle

Starting Calendar service hangs server

Similar Messages

Maybe you are looking for