Starting Classic while running OS 10.4.11

I can no longer start up classic while OS 10.4.11 is running. If I go to system pref. I can choose 9.1 as start up and OS 10.4.11 will close and 9.1 will open but this proves to be a pain. I reinstalled classic and now have two system folders (one labeled previous system folder), I rebuilt the desktop but still no success. Ideas anyone!

Hi, erifon -
If you mean that you can choose to boot to either OS 9.1 or OSX 10.4.11, but the install of OS 9.1 will not function as Classic while the machine is booted to OSX...
The fact that the machine will boot to that OS 9.1 means that it is a valid install for that machine.
It has been reported by some users that although the general requirements for Classic calls for an install of OS 9.1 or later, OSX 10.4.x may have problems using versions earlier than OS 9.2.x.
Suggest you try updating the OS 9 install to OS 9.2.1, and even to OS 9.2.2. You can do that via download updaters. Note - the installers for these updaters will work only when the machine is booted to OS 9; and, if you want to install the OS 9.2.2 update you must first install the OS 9.2.1 update.
Article #120030 - Mac OS 9.2.1 - Download and Info
Article #75186 - Mac OS 9.2.2 - Download and Info
Important - be sure to download the correct language version of the updater(s). Unlike OSX, OS 9 installs are single-language. If the update does not match the language version of the installed OS 9, the updater will refuse to install.

Similar Messages

  • USB RECOGNITION IN CLASSIC WHILE RUNNING TIGER

    I need to be able to use a Keyspan serial assitant USA-28X B to interface with a Fanuc 18i-MB control via RS-232. To make a long story short, I've been using Microphone II in the classic environment on older macs for years to up/download from a Fanuc 16 control. A newly purchased machine has the newer control. I figured I'd just use this G4 Ibook to do the same thing. NOT. The keyspan device is not recognized by the G4 in classic mode. Apple system profiler (9.2.2) says no device is connected to the USB 0 chain. In fact, it doesn't recognize even an apple USB mouse as being there (although it works anyways and is recognized in the OSX profiler). I made sure I reloaded Keyspan's software twice and confirmed that the separate parts are where they belong in the Classic System folder. Extension manager confirms their existence and says they are loaded. Why won't this device work? PS I checked it on the older 16 control and it doesn't work there either although the old Imac g3 sitting there running native OS9 works just fine.

    I was coming to a similar conclusion myself regarding classic mode being able to interface with OS X hardware. I went forward with using the Keyspan device with its OS X driver since I still need to get to RS232. ZTerm was my next choice. I set corresponding baud rates, stop bits, and the other info. Told the Fanuc to "punch" a warm-up program from its memory and voila, code on my screen from the Fanuc. I have yet to be able to send anything back to the machine and it's pi**ing me off. I have to be missing something really easy.
    For those familiar with Microphone, the correct way to send to this control would be to select "transfer"-"send". Protocol is ASCII/Text. This assumes that communication settings have been matched between the machine and the PC; in this case:
    Baud rate: 9600 (or higher if you want)
    Data Bits: 7
    Parity: Even
    Stop Bits: 1
    Flow Control: Hardware
    The closest I have got is to see code on the ZTerm screen scrolling VERY SLOW in one long line across the screen. The Fanuc control never recognizes anything being sent to it and sits flashing "LSK". LSK should change to flashing "INPUT" when first line of code is sent from PC. Obviously the connection is stable if I can send from the machine to the computer.
    Sorry if this seems a bit long-winded but I could really use some help and I want to give as much info as I can up front.

  • 11gR2 : Failed to start EVM while running root.sh in Node1

    DB verision:11GR2
    Platform : Solaris 5.10 (Amd64)
    I've reached the last step in the installation in Node1
    # ./root.sh
    .............all messages say succeeded till here............
    CRS-2676: Start of 'ora.crsd' on 'hudson1' succeeded
    CRS-2672: Attempting to start 'ora.evmd' on 'hudson1'
    Start action for daemon aborted
    CRS-2674: Start of 'ora.evmd' on 'hudson1' failed
    CRS-2679: Attempting to clean 'ora.evmd' on 'hudson1'
    CRS-2681: Clean of 'ora.evmd' on 'hudson1' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    Command return code of 1 (256) from command: /u01/grid/bin/crsctl start resource ora.evmd -init
    Start of resource "ora.evmd -init" failed
    Failed to start EVM
    Failed to start Oracle Clusterware stackA search in OTN and MOS returned nothing. Any idea how i could diagnose this issue?

    Hi,
    Check this note on MOS.
    *Troubleshooting 11.2 Grid Infastructure Installation Root.sh Issues [ID 1053970.1]*
    A Troubleshooting Guide is provided to assist in debugging a specific issue. When possible, diagnostic tools are included in the document to assist in troubleshooting.
    Regards,
    Levi Pereira

  • Tiger finder freaks after starting Classic (OS 9)

    eMac running 10.4.4 suddenly is acting strange after starting classic to run Outlook client. Yes, would like to use Entourage but our Exchange server is older than...I digress. Anyway, Tiger runs fine until I start OS 9, then I try to open a folder or the hard drive in the finder and I get the spinning wheel of death. Only way out is force quitting out of the Finder. I rebuilt the person's account, so its not an account corruption issue.
    Restarted in Safe Boot, repaired permissions, Zapped the PRAM...
    I can't get my arms around this one, help!
    eMac 1Ghz, 640MB, 80GB HD   Mac OS X (10.4.4)  
    G4, G3   Mac OS 9.1.x  

    Anyone? Anyone? Bueller?

  • Vipca not starting up on running root.sh

    Database : 10.1.0.3 + OCFS2
    Operating System : Redhat Linux 4 Update 3(32 bit)
    Issue :
    VIPCA is not starting up while running root.sh at the end of database software installation . i am getting the following error
    i686
    clsrcgetcmd()(Native: listNetInterfaces:[4])
    [clsrcgetcmd()(Native: listNetInterfaces:[4])]
    any suggestions on this issue ?

    Sorry for the late reply.The contents of /root/.bash_profile is as follows.
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    unset USERNAME
    export ORACLE_HOME=/opt/oracle/product/10.1.0/db_1
    export ORA_CRS_HOME=/opt/oracle/product/10.1.0/crs_1
    export PATH=$PATH:$ORA_CRS_HOME/bin

  • Issue while running page OC4J start up failed.

    Hi,
    I am working on two instances one is Local and another is in abroad.
    Now when I am running simple Hello World Page by giving Local Instance connections The page is loading quickly and running fine.
    Now when I am running the same Hello World Page by giving Abroad Instance connections The page load is taking almost 9-10 mins and running fine.
    In the above cases what might be the issue with Abroad Instances for loading page.
    1) Is it the Network Issue?
    2) Is it the OC4J Issue?
    Can anyone breif this senario and how to over come this issue.
    And one more Issue is
    Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
    In which cases we will get OC4J start up failed error.
    Thanks,
    Krishna
    Edited by: user1000 on Feb 7, 2011 5:29 AM

    I am working on two instances one is Local and another is in abroad.What is your application release?
    In the above cases what might be the issue with Abroad Instances for loading page.
    1) Is it the Network Issue?Could be one or more.
    Can you reproduce the issue with other Self-Service pages? Any performance issues with forms?
    2) Is it the OC4J Issue?What about local users who access the same page from the same network, do they encounter the same performance issues?
    Can anyone breif this senario and how to over come this issue.Before investigating the performance issues with the instance/server (which are discussed many times in the forum, so just search old threads for performance tuning and you will get many hits), I would suggest you answer the above two questions to determine whether this is a network issue or an instance/server issue.
    And one more Issue is
    Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
    In which cases we will get OC4J start up failed error.What is the error?
    Thanks,
    Hussein

  • Start and stop data saving while running the vi

    Hi everybody!
    Maybe someone can help me on this topic:
    I
    would like to run a vi which displays voltage values on a waveform graph without saving the values automatically. But - while running the vi - I would like to have the option to
    save the data. That's why I created a switch (on: save data, off: don't
    save data). I wanted to wire the switch to a case structure, but I
    don't know where to put the case structure and the "open/create
    file-vi". If I put both into the while loop (where I write the data to
    the spreadsheet file) then - of course - it asks me with every run of
    the loop where to save the data.
    If I put the "open/create file-vi"
    outside the loop it asks me at the beginning of the application where
    to save the data, even though I maybe don't want to save data.
    I don't know if it's understandable what I mean:
    If
    I run then vi I would like to see the data without saving it first
    (on the waveform graph), then I maybe would like to save it, so I
    want to press a button to save the data. The vi should ask me where I
    want to save the data while still running. I would also like to stop
    saving data without stopping the run of the vi. Maybe I would like to
    save data to another file within the same run.
    Do you know what I mean?
    Thank you very much.
    Kind regards,
    Steffi

    Hi Steffi,
    your first solution was ok as long as you don't restart the vi without removing it from memory before.
    When loading the vi into memory the shift register (SR) is reset to zero and is keeping the value from last iteration.
    Now you initialized the SR in each iteration to zero, hence the 0-0.250 range of the time scale. To keep the last value you can use another SR as shown in the attachment or use some math based on the iteration count (start time= i * 0.25).
    You should only learn from this: initializing SRs makes your vi more reliable... A SR is nothing more than a variable in text based languages, so keep them initialized!
    Message Edited by GerdW on 11-07-2007 01:27 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    ekg2_mod.vi ‏394 KB

  • LNK2019 error while running NI-SCOPE Getting Started example

    Hi,
    I'm running GettingStarted.c example for NI-SCOPE and keep receiving the following errors:
    1>GettingStarted.obj : error LNK2019: unresolved external symbol _niScope_GenericGettingStarted@0 referenced in function _main
    1>GettingStarted.obj : error LNK2019: unresolved external symbol _asciiPlot@8 referenced in function _PlotWfms
    I included all the appropriate libraries for C/C++ and niscope.lib and its path in Linker-->Input and Linker-->General, respectively.
    If anyone encountered a similar problem while running this example code, let me know how to get around this.
    Thanks!

    The Not authorized message indicates that you haven't set up your Adobe document services properly.
    Please check the ADS Configuration Guide available at http://service.sap.com/adobe > Media Library > Documentation.
    Best regards,
    Markus Meisl

  • Used to startup Classic while in OSX but now I can't. +

    Hi,
    I have three questions in this post. Thanks for helping me with any of them!
    I am unable to start up Classic while I am on 10.4.1. I can go into the Start Up disk and select the folder OS.9.1 and restart my computer and I will be in OS.9.1, but when I go to the Startup disk while on OS 9.1 to switch to 10.4.1, there isn't any window to do it from. I had to reinstall 10.4.1 to get back to it. I used to be
    able to switch back and forth, but when I upgraded to Tiger I lost the capability.
    Most of my apps are on Classic too, Dreamweaver 4, Illustrator 8, Flash 5, Photoshop 6, and I can't get to them either?
    Are there any good and reliable cleanup packages to get the garbage out and order your hardrive? Or should I take it to a computer professional? Any recommendations there (NYC)?
    Any suggestions?
    (P.S. Thanks Tom)

    Hi, painterly -
    ...but when I go to the Startup disk while on OS 9.1 to switch to 10.4.1, there isn't any window to do it from.
    By default, OS 9's Startup Disk control panel will show only the one OS (OS 9) in its window. Just to the left of the hard drive's name in the list in Startup Disk is a small bluish reveal triangle - click it, and all valid OS's on the hard drive will be shown. You should then be able to select OSX as the boot OS for the next startup.
    You can also hold down the X key while booting in order to force a boot to OSX - press it as soon as the startup chimes sound, keep it held down until you are sure it is booting to OSX. This is a one-off instruction - it will not change the startup setting in PRAM, which will remain OS 9 until it has been reset in Startup Disk.
    Note - the Startup Disk control panel that comes with a "virgin" OS 9.1 install can not recognize OSX as a viable boot OS. The solutions for this are ro -
    • upgrade just the Startup Disk control panel in OS 9.1. You can download that from here -
    Startup Disk 9.2.1 Document and Software
    • upgrade the OS 9.1 to OS 9.2.1 or later (9.2.2). You can download those updaters from these pages -
    Article #120030 - Mac OS 9.2.1 - Download and Info
    Article #75186 - Mac OS 9.2.2 - Download and Info
    • use the X key at startup to get back into OSX from OS 9.1.
    • boot to an OSX install disk and use its Startup Disk in System Preferences to select OSX on the hard drive as the boot OS.
    Holding down the Option key at startup will bring up Startup Manager. This can be used to select the OS you wish to use as the boot OS on that startup, provided that the different OS's are on separate volumes (volume = an unpartitioned drive, or a partition of a partitioned drive). If they are on the same volume, Startup Manager will show but one OS, the one last used on that volume.
    Article #106178 - Startup Manager: How to Select a Startup Volume
    <hr>
    I am unable to start up Classic while I am on 10.4.1.
    You may need to update the OS 9.1 to OS 9.2.x (9.2.1 or 9.2.2) in order to get OSX 10.4.x to recognize it as Classic. OS 9.2.x provides better compatibility in the Classic mode.
    Most of my apps are on Classic too, Dreamweaver 4, Illustrator 8, Flash 5, Photoshop 6, and I can't get to them either?
    Until you can get OSX to recognize and use your OS 9 install as Classic, the Classic-version apps will not be able to be run while the machine is booted to OSX.
    The solutions for that are to get OSX to recognize OS 9 as Classic; boot into OS 9 whenever you need to use those apps; or get OSX-versions or replacements for those apps.
    <hr>
    Are there any good and reliable cleanup packages to get the garbage out and order your hardrive?
    Not really - at least, none that I would trust. Programs such as those behave according to the logic of the folk that wrote the program, and that logic probably does not apply to your collection of files (programs and documents).
    Rebuilding the desktop file can help OS 9 run better.
    Article #10182 - Rebuilding Desktop File and Icon Recovery
    Beyond that, manually cleaning out the garbage (orphaned support files left behind after a program has been deleted, old documents, etc.) is the only safe way to get rid of unneeded things. Even then, be cautious - it's not difficult to accidentally throw away a needed file.
    Provided you have at least 15% of the hard drive (ideally at least 5GB) left unused, fragmenting of files should not be an issue. OSX in particular defrags files on the fly as part of its normal operation.

  • Cannot start Classic mode after 10.3.9 update

    Hi!
    I recently used the "Software Update" tool to update my 10.3 OS version to 10.3.9. After doing this, I found that I could no longer start Classic mode while in OSX. I did a clean install and can boot using OS 9.2.2, no problems. But I still cannot launch Classic while in OSX.
    The exact error message is: "There is a problem with updating the Classic-specific files. Classic was unable to update its file in "System Folder" on "Macintosh HD".
    I have a graphite G4 with 384 MB RAM and I'm still running a helluva lot of OS 9 software. Any suggestions?
    Thanks for the help
    Joe (designr66)
    G4   Mac OS X (10.3.9)  

    Hi, Joe -
    Welcome to Apple's Discussions.
    Try removing the 'old' Classic-specific files from the OS 9 System Folder (you can do this while booted to either OS, although I suggest doing it while booted to OS 9).
    These files include - Classic, Classic Support, and Classic Support UI (all usually located loose in the System Folder); Classic RAVE (in Extensions folder); and ProxyApp (someplace - location seems to vary).
    Put those in the Trash and empty it, then restart into OSX and try designating the OS 9 System Folder as Classic via the Classic pane in OSX's System Preferences (in Apple menu).

  • Error while running a customize report in oracle ebs

    Hi ..
    can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
    XXIFMS: Version : UNKNOWN
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    Current system time is 03-JUN-2011 11:09:24
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_DATE_FROM='2010/04/01 00:00:00'
    P_DATE_TO='2011/06/03 00:00:00'
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AL32UTF8
    stat_low = 9
    stat_high = 0
    emsg:was terminated by signal 9
    ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program was terminated by signal 9
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
    Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 03-JUN-2011 11:09:24

    Please post the details of the application release, database version and OS.
    Is the issue with this specific concurrent program?
    Can you find any errors in the CM/OPP log files?
    Please see if these docs help.
    On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
    Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
    Thanks,
    Hussein

  • Error while running a job in background

    Hi,
      I got the following error message while running the job in background.
    "Step 001 started .
    Control Framework: Fatal error - GUI cannot be reached.
    ABAP/4 processor: RAISE_EXCEPTION
    Job cancelled"
    What is the reason for this error and how to correct it?

    ALV Grid control is based on the custom controls on the screen. When the program is scheduled in background, it tries to create GUI related front-end objects and hence the error u201CFatal Error u2013 GUI cannot be reachedu201D. This type of problem is common with all the programs that use the ALV grid control to display the output.
    Solution:
    Whenever we execute this type of programs in background, we should be passing a blank docking container instead of the custom container as parent to our grid control. 
    The docking container doesnu2019t need any of the custom controls on the screen; instead it attaches an area to any or all of the four edges of the screen (top, left, right or bottom). The behavior of the areas in the container is determined by the sequence in which they are initialized. Docking Containers are attached to the screen from the inside out. This means that when you create a second container, it is attached to the edge of the screen, and the container that was already there is pushed outwards. 
    Let us modify the standard program (by taking a copy of it) to enable it to execute it in background.
    Following modifications have to be made:
    ·        Define a docking container in the program
    data: or_doc  type ref to cl_gui_docking_container .
    ·        At the time of creating a custom container, check if the program is being executed in background or foreground. If the program is scheduled in background, then create a docking container instead of custom container.
    if cl_gui_alv_grid=>offline( ) is initial.
        create object or_custom_container
               exporting container_name = c_container.
      create object or_grid
             exporting i_parent = or_custom_container.
    else .
    create object or_grid
             exporting i_parent = or_doc .
    endif . 
    Now test executing the program in background. The report would be generated.

  • Error while running a form

    Hi,
    I have downloaded orqacle 10g XE,and developer suite from oracle .
    The configuration I am using is
    OS : Window vista
    Browser : Mozilla firefox
    java applet :jinitator1.3.1.22
    while running the form firefox get hanged and not able to run the form.
    Could anyone tell me the rason for the same
    Thanks in Advance

    Welcome to the Oracle Forums. Please take a few minutes to review the following:
    <ul>
    <li>Before posting on this forum please read
    <li>10 Commandments for the OTN Forums Member
    <li>Announcement: Forums Etiquette / Reward Points
    </ul>
    It sounds like you are using a web version of Oracle Forms (9i, 10g, 11g) but it would helpful to know the exact release. More than likely, you simply need to start the OC4J (9i or 10g) or WebLogic Server (WLS) if you are using Forms 11g. It would also be helpful to know your workstation OS and Java versions.
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Error while running a jsp page : "jasper run time error"

    hii
    I'm facing trouble while running some jsp page . the error is as follows:
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP
         org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
         org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
         org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    root cause
    Unable to find a javac compiler;
    com.sun.tools.javac.Main is not on the classpath.
    Perhaps JAVA_HOME does not point to the JDK
         org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompiler(CompilerAdapterFactory.java:106)
         org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:935)
         org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764)
         org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
    Apache Tomcat/5.0.28
    The set up in my system (path set up is as follows):
    Catalina home: C:\ apache software foundation\Tomcat 5.0
    Classpath: %java_home%;C:\j2sdk1.4.2_03\bin;
    Javahome: C:\ j2sdk1.4.2_03\jre;
    path: C:\ j2sdk1.4.2_03\bin
    <there are other variables available in path, along with that I have added the j2sdk1.4.2_03\bin in path".
    So if u have any way out for it please let me know.

    I think you only need to add: c:\j2sdk1.4.2_01
    you have specified jre on the end of your path, it is not the jre that is required, but the jdk.
    If you are using startup.bat and shutdown.bat (or .sh on Linux) you can amend the files with a text editor (open the startup.bat in notepad), like so:
    @echo off
    set JAVA_HOME=c:\j2sdk1.4.2_01
    if "%OS%" == "Windows_NT" setlocal
    I this will start Tomcat with the correct settings, regardless of your environment settings.

  • Error While Running a ADF Page from JDeveloper

    Hi
    I am facing the following problem while running a page from JDeveloper 11g
    please find the below stack trace and help me in fixing this
    IntegratedWebLogicServer startup time: 181886 ms.
    IntegratedWebLogicServer started.
    [Running application TestApp on Server Instance IntegratedWebLogicServer...]
    [12:39:33 PM] ----  Deployment started.  ----
    [12:39:33 PM] Target platform is  (Weblogic 10.3).
    [12:39:35 PM] Retrieving existing application information
    [12:39:35 PM] Running dependency analysis...
    [12:39:36 PM] Deploying 2 profiles...
    [12:39:43 PM] Wrote Web Application Module to C:\Documents and Settings\hari.kempula\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestApp\ViewControllerWebApp.war
    [12:39:44 PM] Wrote Enterprise Application Module to C:\Documents and Settings\hari.kempula\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestApp
    [12:39:44 PM] Deploying Application...
    <ConfigHelper><getParsedElements> oracle.adf.share.config.ConfigHelper
    java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.adf.share.common.rc.util.impl.MetadataRegistryBigImpl.invokeIO(MetadataRegistryBigImpl.java:130)
         at oracle.adf.share.common.rc.util.impl.MetadataRegistryBigImpl.openStream(MetadataRegistryBigImpl.java:50)
         at oracle.adf.share.common.rc.util.impl.MetadataRegistryImpl.getDomDocument(MetadataRegistryImpl.java:602)
         at oracle.adf.share.config.ConfigHelper.getParsedElements(ConfigHelper.java:221)
         at oracle.adf.share.config.ADFSettingsImpl.parseSettings(ADFSettingsImpl.java:144)
         at oracle.adf.share.config.ADFSettingsImpl.readConfig(ADFSettingsImpl.java:134)
         at oracle.adf.share.config.ADFSettingsImpl.<init>(ADFSettingsImpl.java:68)
         at oracle.adf.share.config.ConfigContainerFactory.findOrCreateADFSettings(ConfigContainerFactory.java:88)
         at oracle.adf.share.config.ConfigContainerFactory.findOrCreateConfig(ConfigContainerFactory.java:65)
         at oracle.adf.share.ADFContext.getADFSettings(ADFContext.java:701)
         at oracle.adf.controller.config.ControllerSettings.getCurrent(ControllerSettings.java:51)
         at oracle.adf.controller.config.ControllerSettings.getPhaseListeners(ControllerSettings.java:74)
         at oracle.adf.controller.v2.lifecycle.ADFLifecycle.initControllerConfigListeners(ADFLifecycle.java:38)
         at oracle.adf.controller.v2.lifecycle.ADFLifecycle.setInstance(ADFLifecycle.java:22)
         at oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl.<init>(JSFLifecycleImpl.java:33)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.<init>(ADFPhaseListener.java:39)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.<init>(ADFLifecyclePhaseListener.java:26)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at com.sun.faces.config.processor.AbstractConfigProcessor.createInstance(AbstractConfigProcessor.java:243)
         at com.sun.faces.config.processor.LifecycleConfigProcessor.addPhaseListeners(LifecycleConfigProcessor.java:141)
         at com.sun.faces.config.processor.LifecycleConfigProcessor.process(LifecycleConfigProcessor.java:114)
         at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:108)
         at com.sun.faces.config.processor.FactoryConfigProcessor.process(FactoryConfigProcessor.java:132)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:202)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1801)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    <May 7, 2010 12:39:58 PM GMT+05:30> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! \java\META-INF\adf-settings.xml (The system cannot find the path specified).
    com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:212)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         Truncated. see log file for complete stacktrace
    >
    <May 7, 2010 12:39:58 PM GMT+05:30> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1273216184760' for task '0'. Error is: 'weblogic.application.ModuleException: '
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         Truncated. see log file for complete stacktrace
    >
    <May 7, 2010 12:39:58 PM GMT+05:30> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'TestApp'.>
    <May 7, 2010 12:39:58 PM GMT+05:30> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'TestApp'.>
    <May 7, 2010 12:39:58 PM GMT+05:30> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         Truncated. see log file for complete stacktrace
    >
    [12:39:58 PM] ####  Deployment incomplete.  ####
    #### Cannot run application TestApp due to error deploying to IntegratedWebLogicServer.
    [12:39:58 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    [Application TestApp stopped and undeployed from Server Instance IntegratedWebLogicServer]
    [Running application TestApp on Server Instance IntegratedWebLogicServer...]
    [12:45:12 PM] ----  Deployment started.  ----
    [12:45:12 PM] Target platform is  (Weblogic 10.3).
    [12:45:12 PM] Retrieving existing application information
    [12:45:12 PM] Running dependency analysis...
    [12:45:12 PM] Deploying 2 profiles...
    [12:45:13 PM] Wrote Web Application Module to C:\Documents and Settings\hari.kempula\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestApp\ViewControllerWebApp.war
    [12:45:13 PM] Wrote Enterprise Application Module to C:\Documents and Settings\hari.kempula\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestApp
    [12:45:13 PM] Redeploying Application...
    <ConfigHelper><getParsedElements> oracle.adf.share.config.ConfigHelper
    java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.adf.share.common.rc.util.impl.MetadataRegistryBigImpl.invokeIO(MetadataRegistryBigImpl.java:130)
         at oracle.adf.share.common.rc.util.impl.MetadataRegistryBigImpl.openStream(MetadataRegistryBigImpl.java:50)
         at oracle.adf.share.common.rc.util.impl.MetadataRegistryImpl.getDomDocument(MetadataRegistryImpl.java:602)
         at oracle.adf.share.config.ConfigHelper.getParsedElements(ConfigHelper.java:221)
         at oracle.adf.share.config.ADFSettingsImpl.parseSettings(ADFSettingsImpl.java:144)
         at oracle.adf.share.config.ADFSettingsImpl.readConfig(ADFSettingsImpl.java:134)
         at oracle.adf.share.config.ADFSettingsImpl.<init>(ADFSettingsImpl.java:68)
         at oracle.adf.share.config.ConfigContainerFactory.findOrCreateADFSettings(ConfigContainerFactory.java:88)
         at oracle.adf.share.config.ConfigContainerFactory.findOrCreateConfig(ConfigContainerFactory.java:65)
         at oracle.adf.share.ADFContext.getADFSettings(ADFContext.java:701)
         at oracle.adf.controller.config.ControllerSettings.getCurrent(ControllerSettings.java:51)
         at oracle.adf.controller.config.ControllerSettings.getPhaseListeners(ControllerSettings.java:74)
         at oracle.adf.controller.v2.lifecycle.ADFLifecycle.initControllerConfigListeners(ADFLifecycle.java:38)
         at oracle.adf.controller.v2.lifecycle.ADFLifecycle.setInstance(ADFLifecycle.java:22)
         at oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl.<init>(JSFLifecycleImpl.java:33)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.<init>(ADFPhaseListener.java:39)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.<init>(ADFLifecyclePhaseListener.java:26)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at com.sun.faces.config.processor.AbstractConfigProcessor.createInstance(AbstractConfigProcessor.java:243)
         at com.sun.faces.config.processor.LifecycleConfigProcessor.addPhaseListeners(LifecycleConfigProcessor.java:141)
         at com.sun.faces.config.processor.LifecycleConfigProcessor.process(LifecycleConfigProcessor.java:114)
         at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:108)
         at com.sun.faces.config.processor.FactoryConfigProcessor.process(FactoryConfigProcessor.java:132)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:202)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1801)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    <May 7, 2010 12:45:18 PM GMT+05:30> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! \java\META-INF\adf-settings.xml (The system cannot find the path specified).
    com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:212)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         Truncated. see log file for complete stacktrace
    >
    <May 7, 2010 12:45:18 PM GMT+05:30> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1273216513742' for task '1'. Error is: 'weblogic.application.ModuleException: '
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         Truncated. see log file for complete stacktrace
    >
    <May 7, 2010 12:45:18 PM GMT+05:30> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'TestApp'.>
    <May 7, 2010 12:45:18 PM GMT+05:30> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'TestApp'.>
    <May 7, 2010 12:45:18 PM GMT+05:30> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.FileNotFoundException: \java\META-INF\adf-settings.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.ide.net.FileURLFileSystemHelper.openInputStream(FileURLFileSystemHelper.java:758)
         at oracle.ide.net.URLFileSystem.openInputStream(URLFileSystem.java:1291)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         Truncated. see log file for complete stacktrace
    >
    [12:45:18 PM] ####  Deployment incomplete.  ####
    [12:45:18 PM] Remote deployment failed
    #### Cannot run application TestApp due to error deploying to IntegratedWebLogicServer.
    [Application TestApp stopped and undeployed from Server Instance IntegratedWebLogicServer]Thanks in Advance
    Kumar

    Hi Frank,
    I am using JDeveloper Studio Edition Version 11.1.1.2.0,
    Even i try to run different application but still i am getting the same error.
    Regards,
    Kumar
    Edited by: harikumarmpl on May 7, 2010 2:50 AM

Maybe you are looking for