Starting diadem with parameters under XP

i can't start diadem with parameters under xp. With other operating systems as NT or win98 it works well

Hi Mutaz,
I just tried this with my Windows XP and DIAdem 8.1, and it seems to be working fine.
- Are you logged in as an Administrator?
- What version of DIAdem are you using?
- Do you get any kind of error message or how do you know that this doesn't work?
- What is your string in the DIAdem properties?
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

Starting webstart with parameters?

Hi all,
Just wondering if you can start up webstart with a number of parameters, eg.
www.somesite.com/webapp.jnlp&param1=a&param2=b
Can this be done? How does webstart treat the extra parameters? Does it pass it on to the main method as arguments?
thanks,
J

Instead, you can use a scripting language like PHP.
You write something like this:
<?php
header('Content-type: application/x-java-jnlp-file');
echo '
JNLP source goes here
?>
Within the echo command you are free to output anything you want, even parameters to the script itself.

Fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Is it possible to start an application with parameters

Hello together,
I have written an application which is stored on a network. People from different computer start it to work with it. Now I have the problem, that I need some different configurations on each computer.
Is it possible to start a labview application with parameters, like: application.exe -User_1
The application should check the parametes and should switch to the needed configuration.
Thanks a lot and best regards,
Michael
Solved!
Go to Solution.

Hi Michael,
yes it is possible. First you have to activate the data transfer of your parameters. You can do it in the application builder. It is something like "send command line parameters to exe" which you have to activate. You will get the parameter in your program with the property "App.Args". It is an array with the exe name as the first element and one entry for each additional linked parameter.
Hope it helps.
Mike

I made A restor with erase from my IPad sitting and it's start and appear on screen apple logo with bar under it but noyhing happened still from 2 hour on this stution

I made A restor with erase from my IPad sitting and it's start and appear on screen apple logo with bar under it but noyhing happened still from 2 hour on this stution,,what can i do?

See if this page helps : http://support.apple.com/kb/HT4097 - it mentions 'showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.'

[1.1.2.25.79] Program hangs after starting long runnin SQL with parameters

Hello Forum,
I'm currently tuning some SQLs with parameters that run some minutes. When I enter the SQL in the worksheet and press F9, SQL Developer asks for the parameters. But after clicking "Apply" (or whatever it is called in the english version, I'm using german ;-)
I get the elapsed time of 0.018 seconds displayed and the whole program hangs until the SQL is completed. The elapsed time is not updated so I don't get the real elapsed time.
I run SQL Developer against an Oracle 9.2 Database on Win2k. The client runs WinXP.
I hope this is not a double post but searching the forum for "parameters" gave too many hits to check. ;-)
Regards,
dhalek

Sqldev hangs when issuing an action that requires the previous action to be completed first.
Sqldev could open a new connection for this, or at least display a message telling the action isn't possible until the previous one completes, instead of just hanging. Vote for the requests for this on the SQL Developer Exchange if you want this getting addressed sooner.
Thanks,
K.

Can I start adobe flash player projector with parameters?

I need to execute adobe flash player projector on the Windows command line.
How can I execute it with parameters like " -fullscreen"?

i couldn't find any documentation on the command line arguments, but you could add a couple simple lines.
for example:
on (load) {
fscommand("fullscreen", "true");
that should bring into fullscreen when it loads.

What's the right way to start up with Portal's dev?

Hi to all Portals experts,
I am really struggling to start up learning Portals and more specific their development.Here is the problem - I am a bit new in the NetWeaver but not new in J2EE environment. I went trough all WebDynpro tutorials and really the documentation was written nice.Good hands-on approach with lots of examples and that is what I found with WebDynpro - everything well explained step by step.
But when I started the Portals Tutorials I was a bit disappointed.
1.First of all, there is no explanation which tools one needs to start up with Portal Dev?
I only have SAP Netweaver Development Studio SP15 installed on my PC and I dont have any access to R/3, CRM or other system. Is this enough to at least start to learn Portal Development or not?
2. I realize well that at some point I will need real system to play with but , until than what useful practice I can do on my own and how?
- Even within the WebDynpro tutorial , the very first Part : Define a system - (http://help.sap.com/saphelp_nw04/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/frameset.htm) -In the portal, navigate to System Administration - System Configuration - System Landscape
Which Portal ? I dont have System Administration on my NWDS SP15?Is is something I should install?unclear?
3. My understanding is that NWDS SP15 contains EP , within its J2EE local engine , but is this EP.6.0, is this enough to develop complete Portal Application A-Z or not - unclear ?
4. PDK. Somewhere I read that Portal Application can be developed with either WebDynpro or with PDK. Ive read about PDK but It is not clear if it is Dev Kit as its name says , should it be downloaded , installed or imported into NWDS, again? And bottom line do I need PDK as a Portal Developer, and at which point?
I only need the starting point for Portal Develop. or some guide that should set milestones 1st ,2nd .. I would prefer the hands-on approach. If some of you has already taken this path and can help me with your directions, links, at least how to get started, I will highly appreciate it! Thanks in advance!Regards, Bob

Hi Bob,
The below reply is as per my experience with Development so far:
1> It is not necessary to have access to R/3 or any other SAP/non SAP application unless you are writing an application in connection to them.
Example: An application which is reading data from R/3 and displaying the same in a table. Yes, in this scenario you would require access to R/3.
2> System Administration is a role just like Home, User Administration, etc in Portal itself.
It contains all the configuration related to System Landscape, Knowledge Menegement, etc
If in case you have not been given this role, you may ask your System Administrator to create the required system (PCD Object). You may then use this system from your Profile (Personalize Portal) link directly.
3> NWDS resides over Portal so you may create your own standalone application or application thats talking to the underlying Portal.
WebDynpro is used to create UI & likewise you may build Web applications or EJB applications.
4> PDK stands for Portal Development Kit. YUou may ask your administrator to download and assign the same to you. This would appear as a "Java Developer" named role in your portal. It contains all APIs required for Java development.
If you do nto have this, you may still use the Javadocs provided on SDN itself.
Depending what custom developmetn you do, depending upon the type the .par (portal archieve), .ear (Enterprise archieve), .war (web archieve) needs to be deployed in portal, so that users may access/view the custom created data.
Hope this helps
All the best!
Warm Regards,
Ritu

How to call a AM method with parameters from Managed Bean?

Hi Everyone,
I have a situation where I need to call AM method (setDefaultSubInv) from Managed bean, under Value change Listner method. Here is what I am doing, I have added AM method on to the page bindings, then in bean calling this
Class[] paramTypes = { };
Object[] params = { } ;
invokeEL("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
This works and able to call this method if there are no parameters. Say I have to pass a parameter to AM method setDefaultSubInv(String a), i tried calling this from the bean but throws an error
String aVal = "test";
Class[] paramTypes = {String.class };
Object[] params = {aVal } ;
invokeEL("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
I am not sure this is the right way to call the method with parameters. Can anyone tell how to call a AM method with parameters from Manage bean
Thanks,
San.

Simply do the following
1- Make your Method in Client Interface.
2- Add it to Page Def.
3- Customize your Script Like the below one to Achieve your goal.
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("GetUserRoles");
operationBinding.getParamsMap().put("username", "oracle");
operationBinding.getParamsMap().put("role", "F1211");
operationBinding.getParamsMap().put("Connection", "JDBC");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
i hope it help you
thanks

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Will not start up with the selected start-up disk

I had two hard drives in my Mac Pro, a 250GB main drive and a 500GB back up drive dedicated to Time Machine. The 250GB was getting full.
I added a new 1TB hardrive and moved Time Machine to the new 1TB drive using the restore tab of Disk Utility following instructions I found on the internet, including renaming the 500 GB drive. That all worked fine.
Once I felt that was working I erased the 500GB drive and then cloned the 250 GB main drive to the 500GB drive, again using the restore tab of Disk Utility. I then changed the start up disk to the 500GB drive. It worked fine except it seemed like the white screen lasted too long at start-up.
I planned to then erase the 250 GB once I was comfortable everything was working fine.
After a few software upgrades, I found that after a shutdown, the computer would start up on the old main (250 GB) drive, which I had yet to erase, not the 500GB dive. The 500GB drive is selected as the start-up disk under system prefernces. After restart it would start up on the corrected (500 GB ) dive but now it refuses to start up on the selected 500 GB drive at all and starts up on the 250 instead, even though it is not the selected start up drive under system preferences.
Help?

Thanks for the advice.
Reboot with option and pointing to correct start-up drive did start up to correct start-up drive.
I reset the PRAM and pointed to the correct hard drive in system preferences, but upon start-up it again booted to the wrong drive.
I disconnected the USB connection to my Epson 1280 and restarted, but it started up with the wrong drive.
I then did a shut down and start up (USB connection to my Epson 1280 still disconnected) and it did boot to the correct start-up drive.
What's with that?

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Hard drive failure (why can't I start up with boot disk)?

Running OS 10.4.6. I was getting flashing question mark at startup. Tried starting with Disk Warrior holding down "C" key. Got Apple logo, but then screen frooze with horizontal lines across screen.
Rebooted, held mouse to eject disk. Tried TechTool Pro disk. Would not boot from that either (got circle with slash logo I think).
Finally was able to boot with Tiger install disk.
Ran disk utility from Tiger disk. My internal hard drive showed up in red letters and said "failing"
OK.....I can understand that.....I guess my hard drive crashed (on my 2 year old Powerbook...oh well)
But, why can't I start up with any of my boot disks (Disk Warrior, TechTool) only the Tiger install disk. Also the Panther and Jaguar disks will NOT start it...only the Tiger disk works. One more thing I'm wondering....I connected my external firewire drive that has a boot partition on it that I have started up with in the past....and it won't boot my laptop either.
Any ideas? Thanks for any insight. Guess I'll head to the genius bar tomorrow. At least my extended warranty is still good (I think).
Powerbook G4 17 1.5 ghz Mac OS X (10.4.6)

Here is what the outcome was:
I took my Powerbook into Apple Genius bar (still under 3 yr. AppleCare), he determined that my hard drive had crashed. He shipped it for me to be repaired.
It came back with a message attached saying that the source of the problem was my 3rd party RAM, which was a 1 GB module. The note said that the memory had been removed...and that in some cases like this the removed memory will be sent back to the customer and will be in the box somewhere. I checked and it wasn't there. The "Get Info" for my system said I was now running on 512 mb instead of the usual 1.5 GB. The note said that this 3rd party RAM had caused the hard drive to fail, so the hard drive had been replaced.
I ordered a new 1GB RAM module from Apple for $300, didn't want to take a chance on 3rd party again. But....when it arrived, I went to install it....and my 1GB 3rd party module was in the slot....it just wasn't pushed all the way in I guess. I pushed it in firmly, closed up the computer, started it, and the "Info" read 1.5 GB again. I ended up removing the 512mb module and replacing that with the new 1GB one I bought from Apple. So now I have 2GB of memory and and extra 512 that I can't use. It has been running fine ever since (more than 2 months)
Can bad RAM really make a hard drive go bad?
I wonder why they said they had removed the RAM, but it actually had not been removed (at least not completely)
Powerbook G4 17 1.5 ghz Mac OS X (10.4.7)

Please help me in resolving the URL with parameters.

Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted��.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
Usha

We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim

Opening a url with parameters in an application

I'm able to open a url in a browser from my application, but I want to open a url with parameters.
for instanse http://mypage.asp?parameter=a
You get a file not found. Is this possible?
I'm currently using
Runtime.getRuntime().exec( "cmd /C start " + url);

Found the answer -- you have to put the url in quotes lest the ampersands parse the end off.

Starting diadem with parameters under XP

Similar Messages

Maybe you are looking for