Starting EAS is very slow -Web Launcher for Administration Services Console

Hi all,
When a user has not been connected to EAS for more or less amount of time
starting the EAS via (Web Launcher for Administration Services Console) takes a very long time.
When ESA is started also opening the “Essbase Server” node and then also opening the “Application” node takes a long time.
This a very annoying.
Is there any chance to accelerate this?
Any hint is welcome.
Thank you in advance!
Andre

Hi,
Oh sorry, I forgot to mention: Version 11.1.2.1 in a distributed environment Win2008R3 64bit.
From one of the servers I also used EAS with the same outcome - well seems the Service behind is the same one.
And as I wrote this is not always case. for example just this morning it was fast as I expected it to be.
However there must be a reason for the occasional slowliness and customers usually has less understanding for suche an up and down of performance.
Any idea?
Thank you in advance!
Andre

Similar Messages

My MacBook Pro just started to run very slow, what can I do to fix it?

My MacBook Pro just started to run very slow, what can I do to fix it?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Printer just started to go very slow?

Don't know of any reason for it, one day my printer started to go very slow . Please give me a way to fix....

Hello there! Welcome to the forums @jhd123
I understand your printer is functioning slowly.
Please let me know some more information about the issue. Here are a few questions I have for you.
What printer(s) are installed on the computer?
How is the printer connected (USB/ wireless/ wired/ Bluetooth)?
What is the Operating System of the computer?
Have you tested hardware functionality (made copies) and do the copies function slowly too?
Have you tried printing from different programs, and are they all printing out slow?
Have you tried uninstalling and reinstalling the software?
Let me know any more details you may have that could help me understand the scenario you are running into, and I will do my best to help
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

You may find this user tip article helpful:
https://discussions.apple.com/docs/DOC-3521
Ciao.

Essbase Administration Services Console (EAS) using a Web browser

Hi,
We have installed Essbase 11.1.1.3 sucessfully.
we are logging into Essbase Administration Services Console (EAS) using a Web browser, i.e. Internet Explorer. Select the language and i am able to login sucessfully however i am not able to see anything when i expand Essbase server.
I have checked my Java version by going to to Start->Settings->Control Panel->Java. On the Java tab, confirm the Runtime Settings and it is Java JRE 1.6.0_22
I am able to see all my applications and databases when i went into the EAS server and logged in by going to Start-All Programs -EPM System -Essbase -Start Administartion services console.
Can anyone kindly let me know what is the issue why i am not able to see anything when i login to console using a Web browser.
Regards,
AS

Hi,
Thanks for the Reply... i have added my server correctly. when i expand my server name.. i am not able to see anything.. ideally i should see applications there.. i am not able to see those.
Regards,
AS

Very slow web browsing

For the last few weeks, the computer has been very slow to access web addresses via Safari. My old Powerbook G3, with Mozilla, works well so I don't think it is Comcast (cable provider). I am using airport for both. Cany anyone suggest how to diagnose the problem and fix it?

I'm somewhat skeptical of a network environment that involves a client installation; that would be my initial target of investigation here, particularly given previous problems reported here with this particular client on this system.
Do investigate the data link speeds and feeds first and not a particular browser, save as there are add-ins or plug-ins or such involved. This can involve ping testing from the shell, or otherwise measuring the bandwidth available through various protocols. (This will help determine if this is a generic issue, or if this is something specific to Safari or to whatever has been done with the network configuration here. Also try some file transfers (downloads) or such, and compare the differences among the systems. For ping, launch Terminal.app and issue the shell command
ping -c 10 www.google.com
to send ten pings to Google. Each one will tell you how fast the round-trip is. The speed reported will vary by your link speed, but I'd tend to expect less than 100 ms round-trip.
As for Safari, do try the Reset Safari option available in the Safari menu. That'll clean out most of the pieces, though not any plug-ins.
[Here are some instructions for uninstalling the client|http://discussions.apple.com/thread.jspa?messageID=1840414] -- I don't have Tiger around and I don't use clients for Internet access, so I don't know how current that set of instructions might be.
And failing that, (and as mentioned earlier) get your data off this box (ensure you have a backup) and reload it; verify the system and (given all that's happened here) I'd reload the box. That's a last resort, but given this stuff doesn't appear to be playing well together that may well be warranted; there's clearly something broken here.
As for the discussion, this is the Mac OS X Server forum; this appears to be the Mac OS X client software and involving an add-on network client, and not the Server software variant.

Fetching data is very slow in workspace for planning application

Hello Everyone,
I am working in the web environment of a planning application and recently I have seen some issue's like Fetching data is very slow through webform's and the system will locking automatically and which kick me off from workspace when I refresh.So could you suggest me like what would be the reason's for this issue's.
Thanks in advance

Hi,
Sounds like your form is very large or there are maybe a lot of dynamic calcs on the retrieval. How many rows and columns have you on the form ? Have you dense or sparse dimensions as rows or columns?
Brian

Very slow start up and very slow response

Hi guys,
SOS
My iMac is so slow to boot or start up. It takes about an 1-2 hours. It has very slow and very delayed response when doing tasks. I'm not sure what happened.
I have tried safe mode but it has not worked. I tried the disk utility but it was saying that my DVD (possibly because it is for snow leopard) is outdated. I think I updated to Lion.
Do you have any suggestions? I will try any other tricks. Do you recommend to back up before doing repair etc.?
thanks in advance!!

Tried to reset the RAM but did not get through. It went to disk utility again. Tried repair but it still saying to back up and restore files. Maybe the HD has been toasted. =(...
It says: Invalid key lenght. Volume Mac HD could not be verifried completely.. then it says Error: disk utilityu can't repair close back disk out, restoere etc..
In disk utillity as well, Mac OS X base system appeared- I dont know the purpose of this. It has some files on it. Dont know whether to restore it or what?..Mac HD seems like the it's empty..
Thanks again guys...It feels like I'm in a maze..

Very slow response, stopping for seconds in the middle of typing an email

I'm having very slow response time with Firefox, so much so that I've switched to IE (gasp!). It'll stop suddenly for several seconds in the middle of typing an email and I have to wait to start typing again. Websites are timing out or just taking a very long time to respond after clicking on something. Yahoo in particular is extremely slow.

For me, I think the "Skype Click to Call 5.11.0.9874" addon was causing the slow response. Once I disabled this addon Firefox was responding normally.

Macbook Pro just start to run very slow

Not sure what has happened but my laptop is now extremely slow... with the spinning wheel showing up when clicked on menus or opening folders!!
iv done an update to OSX 10.9.5 but still the same iv check Activity Monitor and cant really see anything which might using up CPU or Memory ? HHD space over 500GB left...
Memory:
Kernel_task = 541 MB
iTunes = 177 MB
Google Chrome Helper = 156 MB
CPU
nothing over 8% when i start to see it slow down
anyone got any idea whats going on >?? iv not installed anything since this has happened..
thanks

Hi John, thanks for getting back iv copied part of what is in the log hopefully this will tell you whats happening ??
Sep 27 18:43:03 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.54 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 18:43:04 DanPro.local launchctl[389]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 27 18:43:08 DanPro.local sudo[392]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
Sep 27 18:43:08 DanPro.local sudo[395]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
Sep 27 18:43:09 DanPro.local sandboxd[374] ([141]): coreaudiod(141) deny file-read-data /Library/Audio/Plug-Ins/Components/A52Codec.component
Sep 27 18:43:10 DanPro.local sandboxd[374] ([141]): coreaudiod(141) deny file-read-metadata /Library/Audio/Plug-Ins/Components/A52Codec.component/Contents
Sep 27 18:43:10 DanPro.local syncdefaultsd[332]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
Sep 27 18:43:10 DanPro.local com.apple.InputMethodKit.UserDictionary[397]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: Admin~D746949C-1F9F-5A11-B4E1-B30CC465D487:UserDictionary
Using local storage: 1
Sep 27 18:43:11 DanPro.local sandboxd[374] ([141]): coreaudiod(141) deny file-read-metadata /Library/Audio/Plug-Ins/Components/A52Codec.component
Sep 27 18:43:12 DanPro.local com.apple.time[303]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Sep 27 18:43:14 DanPro.local com.apple.SecurityServer[25]: Session 100016 created
Sep 27 18:43:16 DanPro.local imagent[354]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
Sep 27 18:43:17 --- last message repeated 1 time ---
Sep 27 18:43:17 DanPro.local soagent[340]: No active accounts, killing soagent in 10 seconds
Sep 27 18:43:18 --- last message repeated 1 time ---
Sep 27 18:43:18 DanPro.local com.apple.InputMethodKit.UserDictionary[397]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: Admin~D746949C-1F9F-5A11-B4E1-B30CC465D487:UserDictionary
Using local storage: 0
Sep 27 18:43:20 DanPro.local com.apple.time[303]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Sep 27 18:43:21 DanPro.local com.apple.NotesMigratorService[408]: Joined Aqua audit session
Sep 27 18:43:23 DanPro.local apsd[60]: Failed to send activation record to service com.apple.ManagedClient.enroll
Sep 27 18:43:28 DanPro.local soagent[340]: Killing soagent.
Sep 27 18:43:28 DanPro.local NotificationCenter[330]: SOHelperCenter main connection interrupted
Sep 27 18:43:28 DanPro.local imagent[354]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:340)
Sep 27 18:43:30 --- last message repeated 1 time ---
Sep 27 18:43:30 DanPro.local Dropbox[370]: PyObjCPointer created: at 0xbe8fc88 of type {OpaqueJSContext=}
Sep 27 18:43:34 DanPro kernel[0]: fsevents: watcher dbfseventsd (pid: 419) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
Sep 27 18:43:35 DanPro.local Dropbox[370]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
Sep 27 18:43:54 DanPro.local soagent[434]: No active accounts, killing soagent in 10 seconds
Sep 27 18:43:54 DanPro.local com.apple.time[303]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Sep 27 18:43:54 DanPro.local com.apple.dock.extra[433]: No endpoint returned trying to load UnreadCountController.bundle, suspending
Sep 27 18:43:54 DanPro.local soagent[434]: No active accounts, killing soagent in 10 seconds
Sep 27 18:44:05 --- last message repeated 1 time ---
Sep 27 18:44:05 DanPro.local soagent[434]: Killing soagent.
Sep 27 18:44:05 DanPro.local com.apple.dock.extra[433]: SOHelperCenter main connection interrupted
Sep 27 18:44:05 DanPro.local imagent[354]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:434)
Sep 27 18:44:35 --- last message repeated 1 time ---
Sep 27 18:44:46 DanPro.local launchservicesd[52]: Application App:"Finder" asn:0x0-e00e pid:315 refs=7 @ 0x7fd472b0f400 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x20020 pid=444 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 18:44:46 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xe00e, securitySessionID=0x186a6, err=-13066
Sep 27 18:45:00 DanPro.local universalAccessAuthWarn[455]: AccessibilityAPI: pid 304, is not allowed to access the accessibility API. Path: /Library/Little Snitch/Little Snitch Agent.app/Contents/MacOS/Little Snitch Agent
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.75#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.12#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.62#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.148.165#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.147#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.149.220#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.54#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.151.226#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_handle_destination_prepare_complete 1 failed to connect
Sep 27 18:45:07 --- last message repeated 7 times ---
Sep 27 18:45:07 DanPro.local System Preferences[446]: TSUpdateCheck: Connection failed! Error - Could not connect to the server. http://www.flip4mac.com/Updater/WMV/update2.plist?version=2.4.4.2&productid=0000 000&OSVersion=10.9.5&CPU=Intel%20Core%20i7&QTVersion=7.7.3
Sep 27 18:45:15 DanPro.local mds[34]: (Normal) Volume: volume:0x7ffb15002000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.BFjJib
Sep 27 18:45:28 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x275] flags: 0x8 binding: FileInfoBinding [0x175] - extension: GIF, UTI: com.compuserve.gif, fileType: ????.
Sep 27 18:45:28 DanPro.local quicklookd[440]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: GIF, UTI: com.compuserve.gif, fileType: ???? request size:100 scale: 1
Sep 27 18:45:29 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x279] flags: 0x8 binding: FileInfoBinding [0x373] - extension: mp4, UTI: public.mpeg-4, fileType: ????.
Sep 27 18:45:29 DanPro.local quicklookd[440]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:100 scale: 1
Sep 27 18:46:11 DanPro.local sudo[471]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
Sep 27 18:46:11 DanPro.local sudo[473]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
Sep 27 18:46:14 DanPro.local prl_client_app[467]: find_shared_window: WID 104
Sep 27 18:46:14 DanPro.local prl_client_app[467]: CGSOrderWindowListWithGroups: invalid window ID (104)
Sep 27 18:46:14 DanPro.local prl_client_app[467]: CGSOrderWindowList: NULL list pointer or empty list
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:26 DanPro.local sandboxd[374] ([484]): mdworker(484) deny file-read-data /Users/Admin/Applications (Parallels)/{37c79a0d-5740-4675-b78e-1d084bca0232} Applications.localized/.localized (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 isXCode:0 uti:dyn.ah62d4rv4gk80w25tr2 plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4348162)
Sep 27 18:46:27 --- last message repeated 3 times ---
Sep 27 18:46:27 DanPro.local sandboxd[374] ([484]): mdworker(484) deny file-read-data /Users/Admin/Applications (Parallels)/{568d769e-ce74-400d-bcbb-5cf810567a9b} Applications.localized/.localized (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 isXCode:0 uti:dyn.ah62d4rv4gk80w25tr2 plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4278386)
Sep 27 18:46:51 --- last message repeated 3 times ---
Sep 27 18:46:51 DanPro.local launchservicesd[52]: Application App:"Installer" asn:0x0-26026 pid:477 refs=7 @ 0x7fd471625870 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x27027 pid=490 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 18:46:51 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Installer, psn 0x0-0x26026, securitySessionID=0x186a6, err=-13066
Sep 27 18:47:22 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "System Preferences" for over 1.00 seconds. Server has re-enabled them.
Sep 27 18:47:24 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "System Preferences" after 3.01 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 18:47:26 DanPro.local tccd[324]: Refusing client without path (pid 63)
Sep 27 18:47:31 --- last message repeated 5 times ---
Sep 27 18:47:31 DanPro.local sandboxd[374] ([544]): mdworker(544) deny file-read-data /Users/Admin/Applications (Parallels)/{37c79a0d-5740-4675-b78e-1d084bca0232} Applications.localized/.localized (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 isXCode:0 uti:dyn.ah62d4rv4gk80w25tr2 plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4348162)
Sep 27 18:48:01 --- last message repeated 3 times ---
Sep 27 18:59:39 DanPro.local WindowServer[175]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Sep 27 18:59:39 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 18:59:39 DanPro.local loginwindow[38]: CGSGetWindowTags: Invalid window 0xffffffff
Sep 27 18:59:39 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 18:59:39 DanPro.local loginwindow[38]: CGSSetWindowTags: Invalid window 0xffffffff
Sep 27 18:59:39 DanPro.local launchservicesd[52]: Application App:"loginwindow" asn:0x0-1001 pid:38 refs=7 @ 0x7fd472a1a940 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x28028 pid=551 "ScreenSaverEngine"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 18:59:39 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to loginwindow, psn 0x0-0x1001, securitySessionID=0x186a6, err=-13066
Sep 27 18:59:40 DanPro com.apple.launchd.peruser.501[286] (com.apple.SystemUIServer.agent[314]): The following job tried to hijack the service "com.apple.tsm.uiserver" from this job: 0x7fd160700590.anonymous.loginwindow
Sep 27 19:15:39 DanPro.local loginwindow[38]: resume called when there was already a timer
Sep 27 19:15:58 DanPro.local fontd[320]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
Sep 27 19:18:23 DanPro.local Google Chrome[307]: Error launching spell checker for U.S. English: Error Domain=NSCocoaErrorDomain Code=256 "The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712)." UserInfo=0x811506e0 {NSURL=file://localhost/System/Library/Services/AppleSpell.service, NSUnderlyingError=0x8115a8b0 "The operation couldn’t be completed. (OSStatus error -1712.)", NSLocalizedDescription=The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712).}
Sep 27 19:18:30 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:19:00 --- last message repeated 5 times ---
Sep 27 19:20:34 DanPro.local Google Chrome[307]: Error launching spell checker for U.S. English: Error Domain=NSCocoaErrorDomain Code=256 "The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712)." UserInfo=0x81190860 {NSURL=file://localhost/System/Library/Services/AppleSpell.service, NSUnderlyingError=0x8075f150 "The operation couldn’t be completed. (OSStatus error -1712.)", NSLocalizedDescription=The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712).}
Sep 27 19:20:34 DanPro.local Google Chrome[307]: Suppressing further spell checker launch failure warnings
Sep 27 19:20:48 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:21:18 --- last message repeated 1 time ---
Sep 27 19:22:36 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:22:36 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:22:54 DanPro kernel[0]: process Google Chrome[307] caught causing excessive wakeups. Observed wakeups rate (per sec): 158; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 62932
Sep 27 19:22:54 DanPro.local ReportCrash[571]: Invoking spindump for pid=307 wakeups_rate=158 duration=285 because of excessive wakeups
Sep 27 19:23:09 DanPro.local spindump[572]: Saved wakeups_resource.spin report for Google Chrome version 37.0.2062.124 (2062.124) to /Library/Logs/DiagnosticReports/Google Chrome_2014-09-27-192309_DanPro.wakeups_resource.spin
Sep 27 19:24:03 DanPro.local Disk Utility[575]: 10.4-style NSNumberFormatter method called on a 10.0-style formatter, which doesn't work. Break on _NSNumberFormatter_Log_New_Methods_On_Old_Formatters to debug. This message will only be logged once.
Sep 27 19:31:58 DanPro kernel[0]: USBMSC Identifier (non-unique): 08606E6D401FBE50670A65A2 0x951 0x1666 0x100, 3
Sep 27 19:32:03 DanPro.local fseventsd[45]: could not open <</Volumes/KINGSTON/.fseventsd/fseventsd-uuid>> (No such file or directory)
Sep 27 19:32:03 DanPro.local fseventsd[45]: log dir: /Volumes/KINGSTON/.fseventsd getting new uuid: 0E2839C5-4246-4B9E-B9F1-7EDC5D7CBD50
Sep 27 19:32:11 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Disk Utility" for over 1.00 seconds. Server has re-enabled them.
Sep 27 19:32:11 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Disk Utility" after 1.21 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 19:41:27 DanPro kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=611[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
Sep 27 19:46:05 DanPro xpcproxy[622]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 19:58:09 DanPro.local launchservicesd[52]: Someone attempted to start application App:"Archive Utility" asn:0x0-2c02c pid:652 refs=6 @ 0x7fd472b0d3a0 but it still has _kLSApplicationLockedInStoppedStateKey=true, so it is is staying stopped. : LASApplication.cp #2468 SetApplicationInStoppedState() q=LSSession 100006/0x186a6 queue
Sep 27 19:58:21 --- last message repeated 1 time ---
Sep 27 19:58:21 DanPro kernel[0]: hfs: mounted StellarPartitionManager on device disk2s2
Sep 27 19:58:21 DanPro.local mds[34]: (Normal) Volume: volume:0x7ffb13ad7000 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/StellarPartitionManager
Sep 27 19:58:22 DanPro.local DiskImages UI Agent[667]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:58:34 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "CoreServicesUIAgent" for over 1.00 seconds. Server has re-enabled them.
Sep 27 19:58:34 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "CoreServicesUIAgent" after 1.13 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 19:58:36 DanPro.local CoreServicesUIAgent[654]: Error: qtn_file_apply_to_path error: Read-only file system
Sep 27 19:58:49 DanPro.local filecoordinationd[333]: NSFileCoordinator received a message and couldn't parse it. Details: <dictionary: 0x7ffe6cb09270> { count = 2, contents =
"parameters" => <dictionary: 0x7ffe6cb0cc80> { count = 0, contents =
"kind" => <string: 0x7ffe6cb09a10> { length = 15, contents = "providerCheckin" }
Sep 27 19:58:49 DanPro.local Finder[315]: NSFileCoordinator: Sending of a providerCheckin message was interrupted. Details: Connection interrupted
Sep 27 19:59:07 DanPro kernel[0]: CoreServicesUIAg[654] Unable to quarantine: 93
Sep 27 19:59:17 --- last message repeated 2 times ---
Sep 27 19:59:17 DanPro.local authexec[693]: executing /Applications/StellarPartitionManager.app/Contents/MacOS/StellarPartitionManage r.app/Contents/MacOS/StellarPartitionManager
Sep 27 19:59:17 DanPro.local launchservicesd[52]: Application App:"Finder" asn:0x0-e00e pid:315 refs=7 @ 0x7fd472b0f400 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x34034 pid=695 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 19:59:17 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xe00e, securitySessionID=0x186a6, err=-13066
Sep 27 19:59:23 DanPro kernel[0]: disk1s1: media is not present.
Sep 27 19:59:23 --- last message repeated 10 times ---
Sep 27 19:59:23 DanPro kernel[0]: msdosfs_fat_uninit_vol: error 6 from msdosfs_fat_cache_flush
Sep 27 19:59:23 DanPro.local mds_stores[177]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexStore in int _sqlite_bulkEnd(PersistentIDStore *):sqlite3BtreeCommit failed; rc = 13
Sep 27 19:59:47 DanPro.local universalAccessAuthWarn[455]: AccessibilityAPI: pid 693, is not allowed to access the accessibility API. Path: /Applications/StellarPartitionManager.app/Contents/MacOS/StellarPartitionManage r.app/Contents/MacOS/StellarPartitionManager
Sep 27 20:00:20 DanPro.local launchctl[747]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 27 20:00:21 DanPro.local com.apple.IconServicesAgent[745]: IconServicesAgent launched.
Sep 27 20:00:21 DanPro.local distnoted[748]: # distnote server agent absolute time: 4798.155538505   civil time: Sat Sep 27 20:00:21 2014   pid: 748 uid: 0 root: no
Sep 27 20:01:36 DanPro kernel[0]: hfs: unmount initiated on StellarPartitionManager on device disk2s2
Sep 27 20:13:07 DanPro.local CoreServicesUIAgent[934]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
Sep 27 20:13:07 DanPro.local CoreServicesUIAgent[934]: App URL discarded
Sep 27 20:13:07 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x3f03f].com.westerndigital.WDDriveUtilities[938]): Exited: Killed: 9
Sep 27 20:13:17 DanPro.local CoreServicesUIAgent[934]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
Sep 27 20:13:17 DanPro.local CoreServicesUIAgent[934]: App URL discarded
Sep 27 20:13:17 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x40040].com.westerndigital.WDDriveUtilities[941]): Exited: Killed: 9
Sep 27 20:13:43 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:13:44 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.28 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 20:13:56 DanPro.local CoreServicesUIAgent[947]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/Contents/WDDriveUt ilityHelper.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/Contents/WDDriveUt ilityHelper.app/
Sep 27 20:13:56 DanPro.local CoreServicesUIAgent[947]: App URL discarded
Sep 27 20:13:56 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x41041].com.westerndigital.WDDriveUtilityHelper[946]): Exited: Killed: 9
Sep 27 20:14:08 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:14:13 DanPro.local Finder[315]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: FileInfoBinding [0xe003] - extension: (NULL), UTI: dyn.agk80255drq, fileType: lock request size:18 scale: 1
Sep 27 20:14:13 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 5.68 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 20:14:15 DanPro.local Finder[315]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: FileInfoBinding [0xe103] - extension: (NULL), UTI: dyn.agk81n5ddrq, fileType: ulck request size:18 scale: 1
Sep 27 20:14:19 DanPro.local launchservicesd[52]: Application App:"Finder" asn:0x0-e00e pid:315 refs=8 @ 0x7fd472b0f400 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x43043 pid=953 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 20:14:19 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xe00e, securitySessionID=0x186a6, err=-13066
Sep 27 20:14:33 DanPro.local CoreServicesUIAgent[957]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
Sep 27 20:14:33 DanPro.local CoreServicesUIAgent[957]: App URL discarded
Sep 27 20:14:38 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x44044].com.westerndigital.WDDriveUtilities[955]): Exited: Killed: 9
Sep 27 20:15:19 DanPro kernel[0]: USBMSC Identifier (non-unique): 08606E6D401FBE50670A65A2 0x951 0x1666 0x100, 3
Sep 27 20:15:22 DanPro.local fseventsd[45]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x1100a43d8)
Sep 27 20:15:22 DanPro.local fseventsd[45]: log dir: /Volumes/KINGSTON/.fseventsd getting new uuid: 32BF5BC3-BF24-43A9-A2F8-A6067526CF23
Sep 27 20:16:15 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Dock" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:16:17 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Dock" after 2.97 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 20:16:21 DanPro.local fseventsd[45]: unmounting: failed to remove log dir /Volumes/KINGSTON/.fseventsd (Directory not empty)
Sep 27 20:16:21 DanPro.local Finder[315]: CreateWithFileInfo failed to create URL with FSRef, falling back to blank icon.
Sep 27 20:24:26 DanPro xpcproxy[997]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 20:28:12 DanPro.local WindowServer[175]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Sep 27 20:28:12 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 20:28:12 DanPro.local loginwindow[38]: CGSGetWindowTags: Invalid window 0xffffffff
Sep 27 20:28:12 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 20:28:12 DanPro.local loginwindow[38]: CGSSetWindowTags: Invalid window 0xffffffff
Sep 27 20:28:12 DanPro.local launchservicesd[52]: Application App:"loginwindow" asn:0x0-1001 pid:38 refs=7 @ 0x7fd472a1a940 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x48048 pid=999 "ScreenSaverEngine"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 20:28:12 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to loginwindow, psn 0x0-0x1001, securitySessionID=0x186a6, err=-13066
Sep 27 20:40:10 DanPro kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1007[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
Sep 27 20:40:12 DanPro.local launchservicesd[52]: Application App:"Little Snitch Agent" asn:0x0-7007 pid:304 refs=5 @ 0x7fd47161eff0 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x1001 pid=38 "loginwindow"", "LSApplication:0x0-0x48048 pid=999 "ScreenSaverEngine"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 20:40:12 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Little Snitch Agent, psn 0x0-0x7007, securitySessionID=0x186a6, err=-13066
Sep 27 20:42:13 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Little Snitch Agent" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:42:13 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Little Snitch Agent" after 1.09 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 21:03:55 DanPro xpcproxy[1028]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 21:03:57 DanPro.local com.apple.dock.extra[433]: <NSXPCConnection: 0x7fa1b3528b30>: received an undecodable message (no exported object to receive message). Dropping message.
Sep 27 21:21:57 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x253] flags: 0x8 binding: FileInfoBinding [0x5dd] - extension: jpg, UTI: public.jpeg, fileType: JPEG.
Sep 27 21:21:57 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: jpg, UTI: public.jpeg, fileType: JPEG request size:16 scale: 1
Sep 27 21:21:57 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x7d7] flags: 0x8 binding: FileInfoBinding [0x34b] - extension: ai, UTI: com.adobe.illustrator.ai-image, fileType: PDF .
Sep 27 21:21:57 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: ai, UTI: com.adobe.illustrator.ai-image, fileType: PDF request size:16 scale: 1
Sep 27 21:21:59 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x443] flags: 0x8 binding: FileInfoBinding [0x5e3] - extension: jpg, UTI: public.jpeg, fileType: ????.
Sep 27 21:21:59 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:16 scale: 1
Sep 27 21:22:20 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x9eb] flags: 0x8 binding: FileInfoBinding [0x15f] - extension: png, UTI: public.png, fileType: ????.
Sep 27 21:22:20 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: png, UTI: public.png, fileType: ???? request size:16 scale: 1
Sep 27 21:22:22 DanPro.local WindowServer[175]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Sep 27 21:22:52 --- last message repeated 1 time ---
Sep 27 21:38:53 DanPro kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1076[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
Sep 27 21:44:58 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Little Snitch Agent" for over 1.00 seconds. Server has re-enabled them.
Sep 27 21:45:01 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Little Snitch Agent" after 4.23 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 21:46:22 DanPro.local com.apple.IconServicesAgent[334]: Icon filename entry missing from bundle info dictionary for bundle at URL: file://localhost/System/Library/PrivateFrameworks/AOSKit.framework/Versions/A/X PCServices/com.apple.iCloudHelper.xpc/
Sep 27 21:51:58 DanPro.local Google Chrome[307]: CFUserNotificationDisplayAlert: called from main application thread, will block waiting for a response.
Sep 27 21:52:16 DanPro.local uTorrent[1107]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 21:52:16 DanPro.local uTorrent[1107]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 21:54:10 DanPro.local ntpd[179]: SYNC state ignoring +0.165018 s
Sep 27 22:00:49 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 22:01:19 --- last message repeated 2 times ---
Sep 27 22:01:22 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 22:19:28 DanPro.local Console[1150]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
Sep 27 22:24:28 DanPro xpcproxy[1181]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 22:24:29 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Sep 27 22:24:30 DanPro.local syncdefaultsd[1180]: Fixing push token
Sep 27 22:24:31 DanPro.local launchctl[1183]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 27 22:24:31 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Safari" after 2.50 seconds (server forcibly re-enabled them after 1.00 seconds)

How to solve the very slow speed problem for iphoto 8.0.4?

after i update to 8.0.4, the speed is still very slow which is very annoying, 8.0.2 haven't this problem, i am very regret to update this....
so anyone know to solve this. the solution is very important for me coz i want to prepare a photo album to my friends for their wedding.
thanks
Message was edited by: AntonyMack

AntonyMack wrote:
after i update to 8.0.4, the speed is still very slow which is very annoying, 8.0.2 haven't this problem, i am very regret to update this....
so anyone know to solve this. the solution is very important for me coz i want to prepare a photo album to my friends for their wedding.
thanks
Message was edited by: AntonyMack
It seems that something went very wrong starting with the 8.0.3 update, there are numerous threads about this. Make sure to report this to Apple via http://www.apple.com/feedback/iphoto.html

Very slow program launch

1.83Ghz / 512mb Mini that's about a month old.
I have used Onyx for the Maintenance and Optimisation.
Restart.
Wait for everything to load.
Get Firefox in Quicksilver
Press Return
24 seconds later Firefox opens and starts loading the 3 homepages.
Everything is slow to launch. I can't see that memory can be a factor when all I'm doing above is opening a browser.
I assume the above can be speeded up?

I can understand the frustration, not least because I can assure you that by and large, quick and efficient is a good way to describe the normal workings of MacOS.
I can tell you, for example, that on my 1GHz G4 powermac (that I am using at this moment) Firefox launches from the dock in 8.9 seconds. Safari in 6.5. This system is several factors slower than your Intel mini. The G4 does, however have 1.5Gb RAM, though it currently has 8 applications open also (excluding Firefox).
I was looking on the Mozilla site for information as to whether the current version of Firefox is Intel-native of not, but there is no clear indication one way or another. O see a reference to an earlier version that IS universal binary though, so that would seem to suggest v2 is also. In any event, you can check when it's running by opening Activity Monitor, which will indicate PPC processes.
There's no doubt that additional memory will help overall, but I would urge you to consider the other issues I mentioned in the last message - permissions, prebinding, caches etc, because these can have a major impact on system performance. I'm assuming you have some familiarity with these issues since at the outset you mentioned OnyX, a good general purpose tool that deals with exactly these matters, and to consider re-downloading the Firefox installer on the mini and then installing again.
I don't have regular access to an Intel mini to see how it performs, though I have set a few up for users in my networks and not found them noticeably slow in any obvious way - even using Firefox which a couple of my users prefer. Thus I would not agree that such behavior as you describe is particularly normal. Not that that comments helps much!!

Very Slow preview rendering for lightroom 5 on import

I am seeing very very slow rendering of preview images only when using the import function in lightroom 5. By slow, I mean for a shoot of 60 shots in raw, it could take 30 minutes before I can preview them all in the pane to see which ones I want to actually import. This was not an issue with lightroom 4. It is not an issue when using lightroom. Previews are fast there, even for images I've never pulled up before.
My hardware is a PC, with an intell i7 chip, and 16 gig of memory. My nvidia graphics card has the latest drivers.
I've seen a few others reporting this issue, so I'm trying to log it as a bug. Even though the dial up support text on the adobe lightroom says available 24/7, it now plays a voice recording that says only available m-f.
Brad

I'm having the same problem using Windows 7 (64b). I just took a shoot over the weekend for a significant birthday event. Now I can't load the photos. The work-around doesn't work as the program freezes before I get the chance to select the camera under "files".
I recently upgraded from 3.6 to 5 as I was also noticing a slowdown in the import function. That turned out to be a bad move I think. I also deliberately cleaned up the CF card and removed all my video recordings, as this seems to be reported as part of the problem, but to no avail.
This seems to be a pretty major bug to have in a major release that's been around for a while now, that I'm expected to pay for, and no sign of a resolution to date!
Cam.

Everything starting to run very slow

I have had my mac book pro for almost a year, and for a little while now its been running very very very slow for anything, or i try to switch windows and i get a huge delay in it crossing over, like a lag spike in processing. is there a type of defrag for macs? if so how do i go about doing so. otherwise, what could be some things i more then likely donot know about keep a mac up to speed to reduce lag type issues.
thank you in advance for info.

Hi There
The following articles may be helpful:
Mac Maintenance Quick Assist
http://docs.info.apple.com/article.html?artnum=303602
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
OnyX is also a great free programme for cleaning of temporary files, caches and much more. Available from here:
http://www.titanium.free.fr/index_us.html
Hope this helps
J.C

Very Slow Network access for some computers

This has me baffled, I'll try my best to explain.
We have an xserve g5 conected to xserve RAID, the xserve has gigabit ethernet.
All Client computers are also on Gigabit ethernet.
Users are all on network homes on the Server.
Most users are getting descent speeds, transfering a file from the RAID to their (network) desktop takes around 40 seconds for a 1Gb file.
However two users noticed transfer was much slower, 20 mins for the same file.
I've ruled out cable problems and hardware problems because if I transfer to the local computer harddrive the speed is up to around 1 minute.
But I've also ruled out a problem with the user account, because if the same user logs onto another mac the speeds are around 40 seconds.
I tried logging other users into the problem macs and all users drop to 20 minutes.
The only thing I can thing it could be is some problem with how those computers are binding with the server, I tried unbinding and resetting up directory access but that made no difference.
What else can I try other than re-installing?

I went ahead and did a fresh install, but this did NOT fix the problem.. I really can't think what else I can do!
Noticed in Network utility there are a lot of received errors when copying a file.
I replaced all the cables but again I don't think its can be a hardware problem because transfer rates are fine from local harddrive to server, but very slow between 2 network disks (unusually slow, considering all other computers are fast transfering the same file to the same place) HELP!

Starting EAS is very slow -Web Launcher for Administration Services Console

Similar Messages

Maybe you are looking for