Starting from a clean page.

Hello everyone.
I am new to video editing and I purchased a copy of Premiere Elements 7 based on reviews I read and other peoples experiances with Adobe programs.
I've made a couple of movies, some using istamovie and others using click and drag etc.
Now I've got a mish mash of clips, photos, etc filing up the top album and therefore the preview window.
So when I start a new project all this stuff is still there. How do I get rid of all this media?
All I what to see are the media I have chosen for this particular movie.
I have found out how to delete all the other albums I created while experimenting by deleting the the perl files from the C:\Documents and Settings\Patrisk\My Documents\Adobe\Premiere Elements\7.0 folder.
But I can't seem to be able to clear out that top album.
Should I even what to?
Any ideas are welcome.

Thank you for your swift reply gentlemen,
I have been investigating the source of my frustrations with this program and have found out this.
If I use new media ie, not previously imported, it shows up fine in the desired project folder.
If, on the otherhand I try to import media into my project album I had used in previous projects, only the stuff that smarttagging deems good enough shows up.
It seems that previous projects are stopping me from putting the media I want into the album I want.
This is what I mean by a clean page. I want to see the assets I want to see in the album I want them to be in, without smart tagging doing anything (or whatever it is that is causing this issue).
I have tried to delete all the stuff on the top album but I can't find the "select all, delete" button and I've got hundreds of clips and photos plus many broken links to stuff I deleted.
I'll keep trying to refine my question by studying my problem.
I'm using a Panasonic SW20 camera in the PAL zone,
my computer is a 6600 Dualcore with 2 gig ram, 1000 gig drive and a 8800gtx graphic card.
My hard drive is split into 300 gig windows install and the remainder is a media partition. All media used in PE7 is in the windows install.
my install of PE7 is default.
Thanks.

Similar Messages

[svn] 1190: Clean the flex-sdk-description. xml during the clean stage of the build so the build starts from a "clean" state.

Revision: 1190
Author: [email protected]
Date: 2008-04-11 07:06:59 -0700 (Fri, 11 Apr 2008)
Log Message:
Clean the flex-sdk-description.xml during the clean stage of the build so the build starts from a "clean" state.
-Set the antTasks.compiled property if the flexTasks have already been compiled to avoid having a failure when calling ant main checkintests package
Modified Paths:
flex/sdk/branches/3.0.x/build.xml

Somewhere in your pom.xml where you are configuring your build dependancies there will be a line <scope>caching</scope> this line is configuring the build to use a flex runtime shared library. This line is generating the error because caching is not a valid dependancy scope in maven 3 however mojos uses it anyway. There was a defect opened against flexmojos; I've linked it below. Froeder's response to the issue was that it was not fixable, that the warning is expected and that we'll have to live with it for now.
https://issues.sonatype.org/browse/FLEXMOJOS-363?page=com.atlassian.jira.plugin.system.iss uetabpanels%3Achangehistory-tabpanel

Forcing pages to start from odd/even pages

Hi,
I have a book with this kind of documents in it:
1) Cover, starting on an odd page.
2) 2nd of Cover, starting on an even page.
3) TOC, starting from an odd page.
4) Main content, starting from an odd page.
InDesign CS5 lets me define a general setting with Book panel > Book Page Starting Option. However, I don't see any setting to let me force each document/chapter to start from an odd or even page. Is there something like this somewhere?
Without this kind of control, I must choose Continue on the next page as a general rule, with the risk of having some chapters start on the wrong page.
Paolo

Peter, I think this is the correct solution. Very easy to do, since the first paragraph of a page that must start on a particular side is usually a "special" paragraph (chapter title, legals, TOC, and so on).
In case the page begins with an illustration, I can try with a hidden paragraph, or a paragraph containing text of the same color of the page.
This is, however, something that InDesign could learn from FrameMaker, whose book documents can start each one from a separate side.
Paolo

Pages page numbering starting from not first page

Hi. I want Pages to page number starting from not first page but actually page number 12 in my doc should be numbered as page 1 while prior pages numbered i to xi
Can this be done? How? Thanks.
Michael

+Menu > Insert > Section Break+
at the bottom of where you want the numbering to start/change.
Click in the body text of the page and set how you want each sections numbering to appear in:
+Inspector > Layout > Section > Page Numbers+
In the 2nd section make sure you uncheck:
+Inspector > Layout > Section > Configuration > Use previous headers & footers+
Peter

I cannot get the photoshop download to start from the order page - any ideas?

i cannot get the photoshop download to start from the order page - any ideas?

Brookie_g75093 I would recommend trying the steps listed in I can't download a purchased product from the Adobe.com Store.

Fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:( Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??

How do you number pages but start the numbering on the second page, while omitting the page number from the first page (my title page)

I have recently changed from Word to Pages 5.5. I want to create a document with a title page (no number) and the second page as Page 1. It is quite simple to do in Word, but I cannot find a way to do it in Pages.

Hi Ryanlipp;
Insert a section break
Place cursor in the newly created section (page)
     In the Document panel:
select Insert page number: 1.
Under Numbering, select start at: 1
                 It starts numbering from number 1 in the new page (2nd page).
Now place the cursor in the previous page (Ist page).
Select Hide on first page section.
                 This hides page number in the first page of the document.
I hope, this is what you are after.
Regards,

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

This is the code which we have used.
//////////Return if it is first time for the day or not//////////////
+ (BOOL)isFirstTimeToday {
BOOL result = YES;
NSDate *now = [[NSDate alloc] init]; /// represents the current time
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
NSDate *today = [gregorian dateFromComponents:components];
[now release];
[gregorian release];
NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
if (savedDate) {
if ([today earlierDate:savedDate] == today) {
result = NO;
return result;
////////Stores the date/////////////
+ (void)userDidVisitReenforceScreenToday {
[[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
////////////What [NSDate todayAtMidnight] stores/////////////////////
+ (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
[gregorian release];
NSLog(@"dateAtMidnight : %@",dateAtMidnight);
return dateAtMidnight;
+ (NSDate *)todayAtMidnight {
return [self daysFromNowAtMidnight:0];
Please Suggest..

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
developer.apple.com

"my home page only start from the tabs bar I don't see the top of the homepage

I have a problem loading my Home page I don't see the top of the home page as the home page only starts from the tab bar I don't see the backward and forward arrows or the menu please tell me how to reload FireFox so that the full home page loads.
== This happened ==
Every time Firefox opened
== Home page only start from the tabs bar I want to see the top part of the home page

Press ALT or F10 in your keyboard to make the Menu Bar temporarily visible. If you want it to be permanently visible, go into ''View > Toolbars > Menu Bar'', or right-click the Navigation Toolbar (the Reload button, for example) and select ''Menu Bar''.
If this doesn't help, right-click the navigation toolbar, select ''Customize...'' and click ''Restore Default Set''. If it doesn't appear right away, try pressing ALT or F10. You can go into ''View > Toolbars > Menu Bar'' to make it permanently visible, or right-click the Navigation Toolbar and select ''Menu Bar''.
If none of this helps, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Try disabling all add-ons (just to check), to see if Firefox goes back to normal.

Outside in Viewer resets the page number to 1 always, even though the Word document has page numbering starting from different value.

Hi All,
I've a Word Document with page header having page number inserted.However the page numbers have been formatted to start from a value other than 1.
E.g. For a given word document, navigate to "File -> Insert -> Page number-> format page number -> start at " and set the value to say "300". Now insert page numbers, so that the page numbering of the 1st page starts from 300.
When this document is viewed using Outside-in Viewer, the page number of the 1st page always shows 1 instead of showing 300 (though this is not being reset/changed within the actual document)
I'm using Outside in 8.1.9 SDK for the same. Is there an API to set the page number correct (exactly what has been set within the original document) while viewing...
Alternatively confirm if this is a limitation within the Outside-in Viewer.
Thanks,
Badri

You're going to need to open an SR to Outside In Support, Product ID 2276.
Make sure you attach an example Word doc to the SR.

Pages IPad: how to 'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

Pages IPad: how to 'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

Pages IPad: how to 'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

How To "Start From Scratch" and Build a Clean iTunes Library on a Portable USB External Drive?

A while ago I posted about my confused (and confusing) mess of an iTunes:
https://discussions.apple.com/message/16183210#16183210
While dozens looked I guess eveyone agreed with me "what a mess" and moved on.
So ... someone at the Apple Store suggested that what I should do is start from scratch. But I'm not sure if I understand all the steps. He said I should:
* create a folder of all my songs and just the song files not all the other iTunes stuff -- copy all the mp3 and m4a files that I have in Music > iTunes > iTunes Music > Music to a temp folder let's call it "all my music"
* launch iTunes and tell it to move to / always look at / whatever the terms my new portable external USB drive
* click on file / add to library and tell iTunes I want to add that "all my music" folder to iTunes
At this point I don't care if we lose playlists, artwork, play counts and all that stuff.
Does this approach make sense?
Is there another way?
So how do I tell iTunes to only look to the external? How do I get rid of the old stuff I have on the internal that is offering duplicates and phantom entries? Do I need to delete iTunes and then download a new copy? Should I delete the iTunes foilder? ...?
Any advice would be much appreciated.
Many thanks!

jayessemm wrote:
So how do I tell iTunes to only look to the external? How do I get rid of the old stuff I have on the internal that is offering duplicates and phantom entries? Do I need to delete iTunes and then download a new copy? Should I delete the iTunes foilder? ...?
the simplest and working way.
go to iTunes -> Preferences -> Advanced
On there change the iTunes Media Folder location to your external hard drive
Check that the rest of the preference pane looks similar to the following picture.
After doing so, on menu bar go to File -> Library -> Organize Library
This will force iTunes to copy all songs and playlist's to the new place and to build up a new database for the Library.
Empty or corrupted files will left behind on the old location.
After checking that all is on place and working at the new location, you may delete all files at the former location.
Done
Cheers - Lupunus

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

Starting from a clean page.

Similar Messages

Maybe you are looking for