Starting getting text error message 2114 invalid number of digits.Contacted carrier with no response, getting fed up that this problem cannot be resolved, in the middle of maying funeral arrangements and started getting the same message

Getting this message or a couple of my contacts, which have been texting OK , Have deleted them reentered with 10 digits nothing,
they can text me but I cannot respond to them - now in the middle of receiving info on a death in the family - started getting the same message, and
the day before all text's were going through fine. Have contacted carrier no one seems to know how to solve the problem. NOT A HAPPY CAMPER RIGHT NOW!

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Similar Messages

  • Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage.  How can one fix this problem?

    Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage.  How can one fix this problem?  It works on the iPhone.

    It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

  • When i tried to text a message from my contact list  i received a message saying invalid number of digits. i use the area code with the number but still would not send

    When i tried to text a message from my contact list  i received a message saying invalid number of digits. i used the area code with the number but still would not send

    Call your carrier and see what they suggest.

  • Getting error code 3036 when trying to download purchases on itunes, no response from support, anyone have this problem and know how to fix it?

    anyone been able to fix download error 3036?
    thanks

    Actually, it's Visual Basic Script (VBScript) on your
    computer that is causing the problems, not iTunes.
    To get this running, you simply have to re-register
    VBScript. Follow the steps in this article:
    http://docs.info.apple.com/article.html?artnum=304405.
    That should get it going properly.
    Thanks for the help - I think we are on the right rack...unfortunately, when i input the string into the command prompt I get a new error - 'the module "vbscript.dll" was loaded but the call to DllRegister failed with error code 0*80004005.
    Any suggestions for this new problem?
    Thanks in advance

  • I am getting an error code -1202 when I try to buy music on ¡Store,  Does someone how to solve this problem?

    I am receiving this error message indicating the code after I am asked to ingress 3 questions to increase my security level.   I answer the question and after giving accept appears this message.

    Hi,
    There was a LONG discussion on the forum 4 months ago about this exact issue and it was affect Shaw customers. You can see it at [/questions/976504]. However, cor-el mentioned a fix that worked for users and it said:
    Make sure to reset the security.tls.version.max pref to 1 if you have previously changed this pref to 0 to disable TLS 1.0
    Can you see if that helps?
    This is most likely not what's happening but it's safe to go over previously solved questions.

  • I have a new iPhone 5 and receive the following message when texting some people within my contacts.  Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

    I have a new iPhone 5 and receive the following message when texting some people within my contacts.  Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

    I had the same issue with the iPhone 6 and tried everything!  I now understand that at some point I stored a number for a contact without including the area code and sent a text message.  So, to correct the issue, you must literally "erase" all references to the contact, not just the number.  Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places.  The steps below worked and are very simple:
    1) On the contact screen, delete everything stored for that number.  You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step.  Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
    2) Delete the entire string of messages you sent to that number.  That's every single message...
    3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
    4) Finaly, remove the contact from FAVORITES if you saved it that way. 
    5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal.  I used the keypad and dialed to confirm.  If the contact number still shows up, you need to go back and recheck your steps.  Trust me, I had to do this a few times.
    Several posts suggested that you should  reset and turn off your phone.  After following these steps, it was not necessary for me to reset or turn off my device. 
    is there a much faster way to achieve the same results?  Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.  

  • HT4236 I get an error message with I try to plug into itunes;  This iPhone cannot be used because the Apple Mobile Device service is not started.

    I get an error message with I try to plug into itunes;
    This iPhone cannot be used because the Apple Mobile Device service is not started.

    http://support.apple.com/kb/TS1567

  • Icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either.

    icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either on both devices

    Curretly, there is an iCloud blackout.  It started this morning around 2AM California time (Pacific), 5AM New York (Eastern).  A lot of people have been having issues all day, including me.  No iCloud services are online.  Even Find My iPhone is down.

  • I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers.  I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number.  Any suggestions on fixing this?

    I just updated my 3gs to the latest iOS 5 update and now I am unable to text certain numbers.  I keep getting the error code 1121611611 invalid number, even though the number I have in my contacts is a 10 digit number.  Any suggestions on fixing this?

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114

    Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114
    How can this be fixed? Most of my numbers are saved as 7 digit

    So I THINK I've figured this out. Hopefully. I was getting the same problem when I was trying to text my boss and my dad. I went back to try to delete the contact and try again and I noticed that I had the little phone icon next to their numbers and not the messaging text bubble. But I'd also left their type of phone as "home" in the drop down menu. I edited that to mobile and boom, got the text messaging bubble. Tried texting them both, I could now send the message.
    I think if the number is set to home the phone assumes it's a landline and doesn't even try to send. I think the people who have had success deleting and re-inserting the contact edited that piece of information without realizing it.
    I really hope this solves your problem!

  • I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

  • I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the prefer

    I am having an issue in PS CS6 (on a Mac) where in the middle of working on a file, it gets corrupted by filling in a grid of squares in my layer masks as well as deleting out those same sections of misc layers throughout the file. I have reset the preferences, cleaned up the file. Renamed it to another file and 2 weeks later it is doing the same thing. Luckily I had my main subjects as smart objects and it saved them. This second time I just closed it out and opened it again and it is fine. Anybody else have an issue with this? Also it runs really slow these days on my MacBook Pro Retina 2.6 Core i7 with 16gb Ram.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

    I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.  I am running Mac OS 10.10.1.  This only started happening when I installed the update of Adobe Acrobat.

    Hi MEW1,
    Is the printer connected wirelessly or wired?
    Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
    Close Acrobat and then relaunch it and see if it helps you while you do scanning.
    Regards,
    Rave

  • Error: ORA-01722: invalid number performing List of Values query.

    when i created a cascading select list, For the first time it worked properly then little later
    it is giving this error.
    Error: ORA-01722: invalid number performing List of Values query: "select distinct cl_name d, cl_no r from Kclient where gr_no = :P1_GRNO order by 1
    could any one please solve the problem?
    2. when i run the application. in all the items edit button is automatically seen
    including in the login screen.
    could any one identify what is the error and give me a solution.

    Is this better?
    select DISTINCT FIRST_NAME||' '||LAST_NAME display_value
          , ROW_ID return_value
      from "PSA_RESOURCE_MANAGER"
    where PSA_RESOURCE_MANAGER.ACTIVE_FLAG='Y'
       AND :P117_REPORTING_MANAGER = PSA_RESOURCE_MANAGER.REPORTING_MANAGER
       AND :P117_REPORTING_MANAGER <> -1 order by 1or
    select DISTINCT FIRST_NAME||' '||LAST_NAME display_value
          , ROW_ID return_value
      from "PSA_RESOURCE_MANAGER"
    where PSA_RESOURCE_MANAGER.ACTIVE_FLAG='Y'
       AND :P117_REPORTING_MANAGER = PSA_RESOURCE_MANAGER.REPORTING_MANAGER
       AND :P117_REPORTING_MANAGER != '-1' order by 1Is ROW_ID a column in your table by the way? If not, you should use ROWID (without the underscore)

  • When I tried to open PS CC2014, it flashed a bit then quit, same with DW and INDD ... I also got this error message: Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the C

    This morning when I tried to open my CC2014 Photoshop, it started to open, then quit suddenly. Same with Dreamweaver and InDesign. I am a professional and do not have the time to screw around with this. When I tried to run CC app, I get an error that says "Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'." I did so and tried to run the app and got the same error. I tried the cleaner and it removed all of my apps, then I tried to install again, and got the same error. I am getting desperate now, I have clients waiting for their projects. I need help, please.

    Allisonf55952352 have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to resolve the current error?  If not do you have any questions regarding the steps listed with the document?

Maybe you are looking for