Starting point which applies to all infoobjects..where to code the rout

I Have this scenario where i have to get the data from R/3 to BW Perform some analysis(lot of calculations involving multiple infoobjects and fields(ztable)and then write the data back to r/3 via a flatfile and then run a report on the new transformed data....i'd really like to know where i should code this abap routine which effects around 5 infobjects..a start up point..program..
update routine/start routines only effect the individual infoobject so it dosent help.
Thank you guys.

au_n97,
U are right. Many people complain in this forum about this missing, that missing (me too on VOIP), this not working and that not working, Ram too small. ....etc.
i have my complains too, but reading through the forum, actually show a lot of solutions (NOT ALL).
I guess this happens when there is a new learning curve for every New product.
Why is this not availabe, when my old one have it?
Why is this not done this way?
Where is this? Where is that?
People (like me included) when faced with problems, tends to complain first, shout first, then after cool down, look for solutions.
Just did a hard reset - following the instruction from this forum(Shift + Space bar + Backspace + Power On). And move all the "Useless" appls to a "useless" folder. N97 is Really Fast. and i got 54.7 mb free in c:.

Similar Messages

A report which could show all contracts where I involved as collaborator,reviewer/manager

Hi,
Is there any standard reports for below? please advise me.
I am looking a report which could show all contracts where I am involved (collaborator, reviewer, Manager…).
That is if I run a report which could show all contracts where I am involved as collaborator/ reviewer/ Manager.
With Regards,
Jaheer

Hi Jaheer,
"My Master Agreements and Contract Documents" shows only the master agreements and the related contract to the documents you are a collaborator (owner, collaborator, reviewer, etc.). Does this report fulfill your requirements? If not, I think the best you can do is dupplicate the query and update it as required.
Regards,
Marc Romagosa

When my 4S connects to my home wifi, it kicks all other devices off and the router has to be restarted. Can anyone help?

I am using an iPhone 4S with 16gb memory. I did not yet update to iOS 8. I'm using 7.1.2. I have never had any problems previously using 3G or wifi. We just moved and have a new Netgear router supplied by our new ISP. We have ADSL connection. The router seems to be working fine for all the devices in the house. At any time we may have 2 or 3 laptops connected, as well as Kindle Fires, iPod Touches, and my husband's iPhone (which is the same make, model, year as mine). My iPhone will connect, but usually within minutes after connecting my iPhone 4S (though sometimes 30 minutes or more later), it kicks everyone offline and the router needs to be restarted. The router shows appropriate green lights and I can see it on my list of available networks, but if I try to connect I get the "unable to connect to this network" message until we restart the router. No one else is able to reconnect until the restart, either.
I have tried resetting network settings on my iPhone. I have completely turned off my iPhone and the router. I have talked with someone at our ISP and they did a reset of the router with me. They think the router is bad. But it works completely fine for everyone else in the house, so I can't help but think we are having a connection issue between the router and my iPhone.
Any help you can offer would be greatly appreciated! Thank you!

Is her iPhone in a case by any chance? If so, remove the case and try again. How does her iPhone work in free Wi-Fi locations?
Try resetting the iPhone...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
If none of the above work take it to an Apple store or AASP for evaluation. She will not be charged folr this and they will suggest a solution if there is a fault.

Since i started using my new bluetooth, all notifications are playing through the bluetooth not the speaker. Is there a way to change that?

Since I bought my Motorola bluetooth, all notifications while connected are played through the headset and not the phone's speaker. This wasn't a problem on my old bluetooth set.
Is there a way to change this where when I'm connected, the notifications play through the speaker?
K

Setup as new.
Settings>General>Reset>Erase all content and settings

I am having difficulties connecting to my TalkTalk router all of a sudden. The router is downstairs, but I can pick up BT wi-fi from the next door neighbour.

Without moving my router or iMac, I can not now connect to my router which is downstairs and almost directly below my iMac. But I can connect to a BT FON network which is presumably coming from our neighbour - further away. Have I suddenly developed a "dead spot", or something else? And will that dead-spot be eliminated by setting up an Airport base station???

Yes, on-line chat is nothing but a nuisance. I've just scanned their current system and it has changed markedly. You could try another route. Call BT and through their technical department you could 'complain' that your neighbours system is impinging on yours. Talk Talk uses BT anyway.

New on Game Develop - I need a Start Point :)

Hi,
I know that this must be the topic most common, I develop applications to client/Server and I want to venture me in the development of a game (RPG). The problem is that I do not know where to start! Which are the class that I must use? Already exists some api in java to help me? If yes, which are they? The map, the players. I intend to make a basic game in 2d, as lufia (SNES), Final Phantasy VI (USA III - SNES). Which must be my starting point?
Thanks for all !

The beauty of Java is, pretty much everything you need is right there available.
There are other API's apart from the java standard, but I have not used any as of yet.
Java2D API is part of the standard edition java. It will handle transparency and everything else you may need to do an snesRPG clone.
Instance modeling will save you scads of time, make sure you know how to make and extend abstract classes, they will make your life easier, make sure you know how to time Threads properly.
The map will be a class, the class will actually serve as a sort of database for inividual tiles on the map. The class will be instanced from a 2 dimensional array with x and y values being the dimensions. You will need to have 3 or four layers of this map. The class will store the possition, image, and other important iformation about the individual tile.
You need to learn MediaTracker, you will most likely want to use AWT instead of Swing, you will need to learn how to use BufferedImage, etc.
Plan Plan Plan, and Plan more. RPG's are big projects, if you use linux, dia is your friend.
Work on little things like logic while you learn the other stuff you need such as Randoms, how to implement monsters and characters, and make them do battle, how to tell if they are dead, attacking, etc.
An RPG takes a very stubborn individual to successfully complete as one man project, if it doesn't work, there is a reason, find out what it is, and yes it has been done before in java. :-)
I have been assuming you are a good programmer, therefore I just scartched the surface for you to show you some of the things you need to plan for to get into game programming.

Buffering for all InfoObjects

Hi BW Team,
Where can i switch on number range buffering for all InfoObjects where a high number of tuples are loaded?
And also for number range buffering for dimensions.
Can anyone send the info on this ?
Best Regards,
--Laks.

Lakshmi,
Have a look at note 857998.
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=857998&_NLANG=E
Aneesh

Copy : Make the "Apply to all" checkbox checked by default

Hi,
Does someone know a way to make the checkbox "Apply to all" checked by default, in the window that appears when you want to replace files in a folder?
thanks

Nope. Can't be done with OS X tools. Maybe a 3rd-party thingy, but I don't know of any.

How to get list of applied patches which applied using admrgpch

How to get list of applied patches which applied using admrgpch

You can't really get the individual patch IDs from a merged patch, unless you have the log file from the admrgpch run available.
You can, however, get the list of bugs fixed by a merged patch, and those bug numbers sometimes, but not always, correspond to a patch ID. Keep in mind, though, that individual patches often contain entries for multiple bug numbers.
Here's a query that I use to look at the contents of merged patches. It works best if the merged patches have been given unique names, instead of the default name 'merged' from admrgpch. If you run it and see that everything belongs to patch name 'merged,' you might want to change the selected column to ap.applied_patch_id instead of ap.patch_name.
select ap.patch_name
, ad.orig_patch_name
, ad.driver_file_name
, ad.merged_driver_flag
, ad.merge_date
, bug.bug_number
, cp.patch_abstract
from ad_applied_patches ap
join ad_patch_drivers ad using (applied_patch_id)
join ad_comprising_patches cp using (patch_driver_id)
join ad_bugs bug using (bug_id)
order by applied_patch_id;
Regards,
John P.
http://only4left.jpiwowar.com

Client security Solutions/Password Manager failure - all passwords disappeared from the list

Dear All,
Could anybody comment what might happened and from where the PW data may be found.
After computer where turned on, only fingerprint reader PW was active. All other where missing. The folder was empty?
I am sorry about grammar mistakes , this is not my native language

Hi,
based on your description I suggest follwoing:
- in case you have CSS configured for certain applicaitons to start via finger swipe <configuration, where you replaced the typing of the password with your FPR swipe> then I assume, that during the "cleanup phase", Vista deleted also certain files, that are required for the correct configuration of the finger swipe, so that ceratin applications can start. And this was the trigger. CSS detected, that this file is no longer awailable and since he is using a bacpuk, CSS needed to restore the configuration files, so that it can work correctly. However, this situaiton triggered CSS to reboot the machine, so that the changes will work correctly.
This is my assumption, what probably caused the situation, so that the system turn off.
However, the situation, where you could not start this system. Hmmmmm, that seems prety strange.
In this case I can only imagine, that the reboot, or the shutdown command somehow went not corect and the system accidentelly started into Hybernation state and the system freezed.
Althought this is realy just my assumption, it does not need to be exactly this situation.
I would suggest, that the first part might be partly correct, but with the second part I'm realy not sure. I would need to see it and debug the machine, so that I can say exactly what happened.
Do you think, that this might fit your situation?
Rgrds

How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

Hi all
I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
Stay Hungry, Stay Foolish
Solved!
Go to Solution.

Steve Chandler wrote:
I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
Kudos for being sneaky.
I like these creative work-arounds!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

View all what I have done from a specific start point or time frame ?

While I am Creating A Controlling Area, and Defining a Cost Center Standard Hierarchy
get a phone call or meeting. Need to get back to keep going, is there a way or a T-Code to view all what I have done from a specific start point or time frame ?

Greatly appreciate every single reply from all of you.
I did access T-Code SE10, and attached a screen.
The most confusing thing i have ever seen
I was hoping for some type of report that looks like an Excel sheet where it can give better details.

Starting job from the point which it Canceled .

Hi ,
I have a program which updated/insert records to a massive tables.
The program is running with fetch on 10K on each round.
Is there any way to start the job/program on the same point which it been canceld/stop?
so the program will not have to run the records that already been updated again.
10x,
gil.

Other way is to check if i already updated the field.
Then it will start with 10*.
the select will look like this -
select * from tabname where
field <> '10%'.
The problem is that this field is not always a key filed and it will cause a long response times.
What do you think about it ?
Thanks.

HT4972 Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written: To complete the unlock, simply 1 . Open iTunes o

Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written:
To complete the unlock, simply
1 . Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2 . Ensure a SIM card is inserted into your iPhone.
3 . Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4 . Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
5 . After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
I made everything as well as was written, but on completion of the ios 6.1.3 installation the iPhone asks to be activated through wifi or through a wire to the computer.
I connected Iphone to the computer and the text takes off: (Were sorry, we are unable to continue with your activation at this time. Please TR again later, or contact customer care! )
how to me to activate my iPhone?
I hope for your help....

Hey APPLELovestory,
We have an article that goes over troubleshooting iPhone activation issues here:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Hope that helps,
David

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of session and I take 3 weeks or more with this problem if they can support me solve it was the number of seire wearing this being installed at a private university

Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Starting point which applies to all infoobjects..where to code the rout

Similar Messages

Maybe you are looking for