Starting problem when using new domain

Hi all,
I just start trying wl6.0. My problem described as belows:
I start the default domain 'myDomain'and that created a new domain,
say 'testDomain' using the admin console. Then, I stop 'myDomain'
and start the 'testDomain'. The following error occured, it saying
that the file 'fileRelam.properties' is not present. Then i try
copy the file 'fileRelam.properties' from myDomain to testDomain
but still not work, it said autheication error. Do any one know
how to solve my problem?
Thanks.
<2001/3/8 上午10時13分53秒> <Emergency>
<Server> <Unable to initialize the server: 'Fatal initialization
excep
tion Throwable: java.lang.IllegalAccessError: weblogic.security.acl.internal.FileRealmException:
Source file not found: .\config\testDomain\fileRealm.properties
- with nested exception:
[java.io.FileNotFoundException: .\config\testDomain\fileRealm.properties
(The system cannot find the file specified)]
java.lang.IllegalAccessError: weblogic.security.acl.internal.FileRealmException:
Source file not found: .\config\testDomain\fileRealm.properties
- with nested exception:
[java.io.FileNotFoundException: .\config\testDomain\fileRealm.properties
(The system cannot find the file specified)]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:123)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)'>

Problem solved! Thanks all.

Similar Messages

Problem when using own domain name

Hi,
I recently updated my site and gave it a fresher look. I have my own damian name and use iweb and mobileme to host it. the site works fine but the one problem i have is that no matter what page I view of my site it always says my web address in the address bar. For example my site is thecarpetfitter.co.uk. It this site I have 7 pages plus some pages of photos. Now when i'm viewing my about me page the address bar still only says the main site address not thecarpetfitter.co.uk/about me. It does this for all my pages. It's a problem because nobody can bookmark an the actual page they want only the first pages that loads up (welcome page). How can I change this?
cheers

It sounds like you're using Forwarding rather than CNAME to link to MobileMe. See this article for the difference in the browser address bar:
http://iwebfaq.org/site/iWeb_Domains.html
Also this Apple doc for setting up CNAME:
iWeb ’08: Using your own domain name

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. 
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

Problem when using About Operator in Contains Query

Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id           NUMBER(10)      NOT NULL,
name         VARCHAR2(200)   NOT NULL,
description VARCHAR2(4000) NOT NULL,
price        NUMBER(7,2)     NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
      1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
      1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
      0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
      0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AM

Hello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck!

When using FireFox I often cannot view pictures in Hotmail, but have no problem when using other browsers

When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers

Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
*Select: [X] "Always use private browsing mode"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords

Performance problem when using CAPS LOCK piano input

Dear reader,
I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
Thanks and regards,
Tim Metz

Does your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?

Problem when using IE9

We use IE9.
I enter in https://gwserver.
Compose New mail (in Plain Text mode) with body:
Line-1
Line-2
Line-3
And send this mail , for example to itself.
the received letter will look like:
Line-1Line-2Line-3
Someone has the same problem?
Serg

Are you guys still on the shipping code of GW 12? Novell had a fix for this within a couple weeks of GW 12 being released from what I remember. Open an SR and get the latest code.
Or simply tell your users to user HTML.
Todd Bowman
Todd Bowman
Senior Network Analyst
University of Minnesota Physicians
612-884-0744
[email protected]
>>>
From: MarkDissington<[email protected]>
To:novell.support.groupwise.2012.web-access
Date: 5/24/2012 6:46 AM
Subject: Re: Problem when using IE9
skoltogyan;2197344 Wrote:
> The solution is?
>
> Serg
I would guess don't use IE9 until a fix is released? :-)
M.
MarkDissington
MarkDissington's Profile: http://forums.novell.com/member.php?userid=27611
View this thread: http://forums.novell.com/showthread.php?t=455634

Problem when using Javabeans in ADF?

Hi,
I encountered a problem when using ADF.
Please look at the following 2 classes :
public class Person
private String name;
private String city;
private int age;
public Person(String name, int age, String city)
this.name = name;
this.age = age;
this.city = city;
public Person()
public void setName(String name)
this.name = name;
public String getName()
return name;
public void setAge(int age)
this.age = age;
public int getAge()
return age;
public void setCity(String city)
this.city = city;
public String getCity()
return city;
public class PersonFactory
public PersonFactory()
public List getPersons()
List list = new ArrayList();
list.add(new Person("peit", 18, "dalian"));
list.add(new Person("robin", 22, "shenyang"));
list.add(new Person("Joe", 30, "York"));
list.add(new Person("Edi", 23, "Beijing"));
return list;
public List getNames()
List list = new ArrayList();
list.add("Peit");
list.add("Robin");
list.add("Joe");
list.add("Edi");
return list;
public void commit()
System.out.println("Data commited");
I created the PersonFactory class as DataControl, so I can use the getPersons() and getNames()(just for test, so they are simple), I drag the names from
the DataControl palette as Table in a JClientPanel, good luck, it works and displays the 4 Strings in a table, but when I drag the persons from
the DataControl palette as Table in the same JClientPanel, it does not work and raises exception :
java.lang.NullPointerException
     at javax.swing.JTable.prepareRenderer(JTable.java:3731)
     at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:1149)
     at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1051)
     at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:974)
     So, I confused why? How to edit it properly?
     Thanks.
Message was edited by:
[email protected]

Hi, Frank
Thank you for your reply.
I am sorry for not explaining well. I mean that the getNames() works fine, but getPersons() does not. The only diferenece between them is the former is simple string and the latter is javabean, but when I made the PersonFactory as DataControl, I set the bean class Person for the getPersons()(list of persons) bean class.
I debuged the class, the exceptions raised when the table for getPersons() setModel() method called.
So, where is the problem?
Thanks.

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

I encountered a problem when using Flash Player V9.0.115, can somebody help me?

Hello all, can somebody help me?
I have encountered a problem when using Flash Player
V9.0.115. Your help would be greatly appreciated.
The problem described as follows:
1. The flash file with sound works well before uploaded to
website. The audio lost when uploaded to the website(There is no
problem with the flash file size). I have uploaded the flash file
to website for you to test. Please go to
http://www.sameshow.com/democreator/create
a new site.swf and kindly check with it.
2. When we open the flash movie in IE with Flash player
V9.0.47 and previous versions (Flash9d.ocx), the flash movie with
sound works well.
3. When we upgrade the flash player to the latest version
V9.0.115 (Flash9e.ocx), the video works well, but the sound just
can play several seconds and then stop.
4. On Flash Player ocx V9.0.115. If we publish the flash
movie on web with 24fps, the sound just can work several seconds
and then stop, the problem is the same if we use the
TShockWaveFlash control to play the flash movie.
5. On Flash Player ocx V9.0.115. If we publish the flash
movie with 12fps, the sound works well but the quality is really
very poor. It seems that the sound plays shorter with more frames
per second. But the flash file works well with the Flash Player
V9.0.47 and previous versions (Flash9d.ocx).
Can somebody help me to figure it out? Thanks in advance!
Regards,
Sabrina
[email protected]

Hello Darren, I really appreciate your response. My mail is
[email protected] I have uploaded the flash file to our
ftp,
http://www.sameshow.com/democreator/create
a new site.swf. And also I compressed the original file to a
zip file and uploaded to our ftp at
http://download.sameshow.com/aff/create.zip,
please kindly check! When we playing this flash file on FlashPlayer
V9.0.47 and previous, the audio works well. But the audio just can
play several seconds and then stop when I playing it on FlashPlayer
V9.0.115. The garbled audio makes us very upset. Your help would be
great appreciated!
Sabrina Fu

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%.

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%. Sometimes it will reboot on its own, and other times you have to leave it for an hour or so and then manually turn the phone on again. Any ideas?

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes up again?
If this does not work, try to save as much data as you can and set it up "as new device": How to back up your data and set up as a new device

Orange mail software problem when using distribution lists : some lists cannot be used for writing e-mails. The problem does not exist when using Internet Explo

When writing an e-mail directly on the Orange e-mail service (not on Thunderbird) I am facing the following problem : some distribution lists cannot be used to complete the adressees. The same lists can be used without difficulty if I use Internet Explorer instead of Firefox. The Orange hotline told me that probably my Firefox version was not updated. Unfortunately I checked that, and apparently the automatic updating works. I have also updated the plug ins, without any result.

Please could you specify which webpage you mean ?
The process with Orange is the following :
- 1. click on "Write an e-mail" on the mail webpage
- 2. click on "To" to reach the Contacts which opens a new window
- 3. click on "Distribution lists"
- 4. click on the selected list then click on "add". The list appears ot the box corresponding to the addresses .
UNTIL THEN EVERYTHING WORKS WELL
- 5. click on the button "validate", which closes the window previously opened and normally
- 6. reloads the initial page with the complete list on the line "To". Instead of that I get the last e-mail address I previously used .
Question : at which step of this process should I try your suggestions ? I tried when the initial page was reloaded with the wrong address, but it did not work to get back the rignt distribution list;
Note that the whole process functions with OTHER Distribution lists. The only difference is that the problematic one has a larger number of adresses (62) however inferior to the maximum indicated by Orange (100).
I also remind that there is no problem when using Internet Explorer instead of Firefox.
Thanks for your help !

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks Pete

Hi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Starting problem when using new domain

Similar Messages

Maybe you are looking for