Starting Queue Demon and Queues SMOHQUEUE
Hie FELLOWS
In transaction SMOHQUEUE, when I click <i><b>Start Queue Demon</b></i>, I am getting the error an RFC connection error to do with SAPCRM_MW_RR_000, it says Queue Demon could not start because of rfc SAPCRM_MW_RR_000 error, either name or login incoreect. But whist testing I went to sm59: SAPCRM_MW_RR_000 and removed <i><b>rfcuser, the password and the client</b></i>, then it started successfully.
Would anybody know the reason why? If so could you please explain, and could you also highlight to me the effects of my removing rfcuser, the password and the client in sm 59.
Will reward maximum points
Hie Devie
I spoke to one of our basis guys about the error I was facing, and they told me that every client has a default client from which they copy, which is the client 000. So it is within this client that you are supposed to create your RFCUSER with the recommended password which is LOGIN. These are the parameters that you will then use for Creating RFC Destination for Replication & Realignment (Clt 000) SAPCRM_MW_RR_000.
With respect to the effect I am not too sure really, but I suspect your queues in TC SMOHQUEUE will be in status Released or on Hold, and not in Running.
I tried and it worked.
Similar Messages
-
SMOHQUEUE: Starting queue demon not successful
Hi
I am performing the configuring settings in CRM and ECC. I am facing few problems, could you please help me overcoming these challenges:
1. In CRM, when i tried to Start Queue Demon in txn code: SMOHQUEUE, I am facing the following error:
"Starting queue demon not successful. Error during aRFC (SAPCRM_MW_RR_000:Error during the retrieval of the logon data store)".
2. In ECC, in SMQ1, if i double click on R3AD_BUPA48, it shows:
Destination: vqdisu_QAE_30 (Destination should be CRM but showing ECC - where can i change the Destination)
Status: SYSFAIL
Logical system changed, see SAP Note 588701
How can i overcome these problems.
ThanksHi,
For issue # 1 : Maintain a destination SAPCRM_MW_RR_000 in transaction SM59 according to note 305881.
For # 2 : This error may occur post client copy if somehow BDLS was not run properly. If you see an entry in CRMPRLS in ECC and CRMMLSGUID in CRM and they're fine, the issue might still be there. So delete CRMPRLS on ECC, reset the queue and execute.
A new entry in CRMPRLS would be populated automatically.
Tnx. -
Windows 7, CS4 Media Encoder freezing and crashing upon clicking "Start Queue" - every sequence!
Windows 7, CS4 Media Encoder freezes when queue starts with sequences from Premiere. However, sequences opened from Media Encoder's "Add Sequence" export fine. Have re-installed (without first un-installing), issue is ongoing. I have several important deadlines fast approaching, please help! Media cache has been cleared (both automatically and manually), computer has been defragged and scanned for disk errors... I am absolutely stumped!
I've checked the anti-virus (I didn't think of that!), but it doesn't seem to make any change.
I've had Window Task Manager running while trying to export, it would seem that the problem occures when PProHeadless.exe opens. If I manually close it right before clicking "Start Queue", AME doesn't freeze until PProHeadless.exe re-starts once more.
Any information on forums regarding PProHeadless.exe seem more to do with an error message, not that the application itself is causing problems. I've tried multiple different sequences, all with different footage, different types of files and all with the same result.
Would a complete reformat or Windows and CS4 be the only answer? I dread the thought but I'm getting desperate. -
Adobe Media Encoder does not start queue
Hi, 5 days ago I started having problems with AME 6, just updated version 6.0.3.1 (64 bit). I work with premiere 6 version 6.0.5, windows xp, always worked since this week, AME :doesn.t start the queue. after 2 minutes working you can hear the sheep sound and the report says: unknown error, unable to locate or read original file. I updated everything was available, reinstalled the suite (premiere and encore 6), it's still not working.
Do you have any idea about the problem?
thank you
FrancescoThe status "Waiting" indicates that the job is ready to be encoded. As of CS5.5, AME by default does not start processing the Queue automatically. Instead, it waits for you to start encoding by clicking the Start Queue button in the upper right corner of the window--it looks like the Play button on a media player or editing app. Watch folders are an exception to this rule: jobs that come in via watched folders start automatically by default.
You have the option of having AME start encoding automatically. To enable this, check the "Start queue automatically when idle for <n.n> minutes" and set the desired wait period. -
AME becomes unresponsive on starting Queue
Hi Guys,
Anyone else having this issue? Will appreciate your assistance if so.
I have a number of encodes to complete. Some for DVD, some for BluRay and some for Vimeo. I queue all these up as I want them ticking along during the day while I get on but afer taking the time setting up the queue I hit the go/start/play button and then AME thinks about things before becoming unresponsive and I need to shut it down to quit and try again.
For the record, I do have the native Premiere Pro import option checked as I love the way it loads in Premiere Sequences but if this is the problem then I will have to shut off.
Many thanks,
AlexHi Larry
Thanks for coming back to me.
Larry Sullivan wrote:
Are you using GPU accelaration? There's a Renderer menu at the bottom of the AME queue, if this is set to CUDA or OpenCL try switching to Software Only and see if that helps
Yes I am currently using the CUDA option. Found this has been great at speeding up the encoding, espeically with h.264 media. Not keen on switching this off long term.
Larry Sullivan wrote:
Disable "parallel encoding" in your Preferences, this will tell AME to only encode one job at a time. It will take longer but may avoid the freeze (or at least show you which output is failing)
I will give this a try. I ended up doing each encode manually one at a time and it seems to me that it may have something to do with this. It did apprear that one encode of a particularly long clip was the one causing a slow down/crash
Larry Sullivan wrote:
Are you sure you have enough room on your destination drive for all the outputs in your queue?
No problem here. 12TB on the destination drive.
Larry Sullivan wrote:
What's the state of the Encoding panel when AME becomes unresponsive. Is there a specific process mentioned? Ex: "Reading XMP..."
No. It just is blank and shows as if it is doing something but never really gets there. When I click on the application it's then that I get the spinning beach ball!
Larry Sullivan wrote:
Try resetting your AME preferences by relaunching the app and holding the Shift key down
I will try this.
Larry Sullivan wrote:
Make sure you've got the latest version of the Creative Cloud app installed. Try quitting the CC app and relaunching it, does it say there's an update available?
All up to date. -
Start, restart, stop and status stored procedure - howto?
First:
- this and other otn forums are awesome!
- apex is neat
Second:
- I have O'Reilly books: "Oracle pl/sql programming" and "Mastering Oracle SQL"
- Also tried to search / google best practices around stopping 'hanging stored procedures' and creating logics for such happening
Challenge:
I would like to implement simple solution for starting, stopping, restarting and maybe even getting status of stored procedures. Sounds like unix runlevels but in "userspace" without the sys rights.
Finally I would like to have this functionality in apex-application where predefines stored procedures could be started, restarted, stopped and maybe even status could be retrieved.
start - this is simple, start - but maybe check if such stored procedure is already started ( so this start will fail)
stop - send signal to certain procedure(s) that now it/they should exit immediately
restart - actually stop+start
status - maybe via status table indicating e.g. records_processed/records_to_be_processed
Mostly I need this stop so what would be the best way to write "exit" for stored procedure? I would like to avoid the following approach:
SELECT sid, serial# , username, schemaname, osuser FROM gv$session;
ALTER SYSTEM KILL SESSION '<sid>,<serial#>' IMMEDIATE;
/paavo
Edited by: paavo on Jul 13, 2009 11:35 AM - added status to subject :)paavo wrote:
Thank you, very good references, but still I think my challenge persist on stop still because I try to do this without the rights to v$session etc. tables.
So what would be the best way to deliver stop-message to executing stored procedure. E.g.
- via table which is regularly checked by stored procedure (e.g. in loop it selects from the table)
/paavoI think for stopping such a procedure you have only two sensible possibilities.
First option is to kill the session. For this you or the logic that does the kill needs the appropriate rights to do it.
Second option would be to programm this behaviour. The procedure can listen to a kind of signal and if it gets that signal it is stopped. This signal can be a value in a parameter table, but it can also be a message in some pipe/advanced queue. However this means the procedure will stop only at certain defined points (whenever it checks for the stop signal).
Btw: You didn't mention what is the business case behind that technical request. Maybe you can elaborate a little on that too. -
Failed to start "admin server" and "BI publisher" : Reason java.io.IOException openWallet
Hello,
I need your help to fix a critical problem to start Admin server and BI server :
# ...domains/bifoundation_domain/bin/startWebLogic.sh ....
Failed with
17-Mar-2015 17:17:33 oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException
Best Regards
Djams
More détails in ... /logs/AdminServer.log :
####<17-Mar-2015 17:14:16 o'clock CET> <Notice> <Log Management> <srver3.domaine.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (sel
f-tuning)'> <> <> <> <1426608856985> <BEA-170019> <The server log file /servers/bipublisher/bip11/user_projects/domains/bifoundation_domain/servers/AdminServer/logs/AdminSe
rver.log is opened. All server side log events will be written to this file.>
####<17-Mar-2015 17:14:16 o'clock CET> <Info> <Log Management> <srver3.domaine.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-
tuning)'> <> <> <> <1426608856998> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Diagnostics> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Defaul
t (self-tuning)'> <<WLS Kernel>> <> <> <1426608857142> <BEA-320001> <The ServerDebug service initialized successfully.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857307> <BEA-002622> <The protocol "t3" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857308> <BEA-002622> <The protocol "t3s" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857309> <BEA-002622> <The protocol "http" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857309> <BEA-002622> <The protocol "https" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857311> <BEA-002622> <The protocol "iiop" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857313> <BEA-002622> <The protocol "iiops" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857314> <BEA-002622> <The protocol "ldap" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857316> <BEA-002622> <The protocol "ldaps" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857323> <BEA-002622> <The protocol "cluster" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857324> <BEA-002622> <The protocol "clusters" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857333> <BEA-002622> <The protocol "snmp" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857333> <BEA-002622> <The protocol "admin" is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (se
lf-tuning)'> <<WLS Kernel>> <> <> <1426608857334> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <RJVM> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self
-tuning)'> <<WLS Kernel>> <> <> <1426608857380> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address :7001
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
#####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Server> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608857449> <BEA-002609> <Channel Service initialized.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Socket> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608857487> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Socket> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608857488> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Socket> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608857489> <BEA-000406> <PosixSocketMuxer was built on Apr 24 2007 16:05:00>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Socket> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608857518> <BEA-000436> <Allocating 4 reader threads.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <Socket> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608857521> <BEA-000446> <Native IO Enabled.>
####<17-Mar-2015 17:14:17 o'clock CET> <Info> <IIOP> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608857866> <BEA-002014> <IIOP subsystem enabled.>
####<17-Mar-2015 17:14:22 o'clock CET> <Error> <Security> <srver3.domaine.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426608862432> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException>
####<17-Mar-2015 17:14:22 o'clock CET> <Critical> <WebLogicServer> <srver3.domaine.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1426608862434> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: oracle.security.jps.JpsRuntimeException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:170)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: oracle.security.jps.JpsException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException
Caused By: oracle.security.jps.JpsException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2984)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException
at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:184)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:358)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:176)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:160)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:118)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:56)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2956)
at oracle.security.jps.internal.policystore.PolicyUtil$3.run(PolicyUtil.java:2950)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2950)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<17-Mar-2015 17:14:22 o'clock CET> <Notice> <WebLogicServer> <srver3.domaine.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1426608862461> <BEA-000365> <Server state changed to FAILED>
####<17-Mar-2015 17:14:22 o'clock CET> <Error> <WebLogicServer> <srver3.domaine.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1426608862461> <BEA-000383> <A critical service failed. The server will shut itself down>
####<17-Mar-2015 17:14:22 o'clock CET> <Notice> <WebLogicServer> <srver3.domaine.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1426608862462> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<17-Mar-2015 17:14:22 o'clock CET> <Info> <WebLoHello Djam,
Please review the following:
The FMW WebLogic Server (WLS) installation has been configured to use a non-default Java temporary files directory,
i.e. the following has been set in the WebLogic startup or setDomainEnv.sh script:
EXTRA_JAVA_PROPERTIES="-Djava.io.tmpdir=/appl/oracle/temp_java_files ${EXTRA_JAVA_PROPERTIES}"
Reference: How to Change the WebLogic Server Location for Temporary Files (Doc ID 1336002.1)
When the Middleware home was restored the directory specified by java.io.tmpdir parameter was missing,
Therefore an IOException occurred when opening the wallet and WLS was unable to initialize the OPSS successfully.
To resolve the issue re-create the directory specified by the java.io.tmp dir parameter, and make sure the owner and group access are the same as for the FMW installation.
Unable Start AdminServer: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException (Doc ID 1923395.1)
Bogdan -
How the process starts in XI and which one should start first ?
How the process starts in XI and which one should start first ?
XI flow :
1.File picked by the adapter,at the A.E it converts to XML format.
2.Generate a msg ID for the file and creates XI header to that file using CPA cache. CPA cache will be having the information about all the Control(address) data.
3.Module processor
4.The file goes to send queue by the adapter engine, that file will be picked by the internal XI adapter and the file will be forwarded to the Integration engine.
5.Pipeline steps follow the Integration Engine.
Receiver determination, Interface determination, Msg split, Msg mapping, Logical routing, Receiver aggrement, call adapter
6.The file will go to receive queue, which was taken and forwarded to the adapter engine. -
How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank
JasonFromSK wrote:
With the newest Airport firmware (7.6.1), it seems I should be able to do this.
Really? I need to check that out!
You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
AC -
Hi, I don't know who to turn to: the person who handles all the compter stuff is out of town, This A.M.I started up Firefox and there was a message re an update, I thoght I new just to click on install and wait to re start Firefox. But what I can remember is that another window opened and asked me to choose 'something' (an icon or banner or?), I thought I must click something (I guess I should read all clearly). Firefox did update to 3.6.4, but it also inserted some sort of what might be called a banner? But it only partly covers the right one- half of my 3 toolbars at the top of the Firefox window. It can't be used for anything as it is just a mess of colors and unknowns, except what looks like a 'top' and what I recognize as a Firefox icon (but only partly visible)!! Now, what it does do is partly hide that whole portion of the toolbars and they are hard to read and in turn make this 'thing' impossible to figure out, if I would care to? I can't find anyway to remove it or use it?? But since the Firefox icon is on it, I guess you should know what it is and how to trash it. I am sorry for this occurrence caused my my carelessness, but I'm not much of a computer person ----HELP! Thank you for any help. Judi
== This happened ==
Every time Firefox opened
== Today, Thrsday June 24, 2010The only thing I can imagine: it's a [https://addons.mozilla.org/en-US/firefox/personas/ Persona].
Tools->Add-ons->Themes
Here should be the persona (lightweight theme)
and a button "Remove"
Click it (button Remove), and it (Persona, this mix of colors) should go away instantly.
Does it help you? -
When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.
"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done. -
It won't even let me closedown itunes, just freezes and I end up having to switch off my laptop and restart. It's only recently that it started doing this and I've just bought an ipad so I'd like to get the problem sorted as I can't sync that until I do.
Hi,
I had a similar problem, all you can do at present to rectify this is to grab your playlist or new created playlist or song from the main library or playlist and drop it into the ipod tab under devices and it will auto sync the changes or songs. Hope this helps.
There seems to be a problem with the syncing of itunes 11 (mine is 11.0.5) when you just use the normal sync method. the above should work and has worked for me when transfering a playlist straight into the ipod it automatically syncs.
Regards.
Nick -
When I try to buy any app or song from iTunes app or app store on iPhone 5 it seems to start the stops and goes back to baseline in a second or two.
It did it with my old iPhone 4 in last month or so, and it I hoped it would go once I updated to new iPhone 5. The problem has transferred to new phone too.
I can't sign in to iTunes account on iPhone. It takes the password then resets to baseline. No error message comes up. On the base computer (pc) it will allow me to sign up and buy songs, apps etc. I can then sync the phone and put them on it. It just won't let me buy direct from the .
As there are no error messages I am at a loss what to do. I have updated the payment details on my account, and my husband has an iPhone 4 and has no such problems. We share the same wifi. I have tried with 3G as well as wifi, with no luck.
I am pretty much out of ideas, and have tried searching forums but there is so much overlap between queries that I can't find a similar problem from someone else, but I am sure it exists!
Can anyone please help me?
Thanks in advance
SarahI figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps -
I'm trying to buy a book I made in I-photo. I have made a 20 page book in I-photo and when I push the "buy book" button it starts to process and then pops up a sign that say'es There was a problem commucating with the apple store. Please try again. Help
Are you buying from the correct Print Products Store? If you are using the wrong store, your AppleID may not be valid.
Is the Print Products Store set correctly in iPhoto Preferences > Advanced? It should be set to the same country as your billing address and delivery address, and match the settings of the Apple ID you are using.
And you are using iPhoto '09 or '11, right? you can no longer buy books from earlier versions.
When you reenter your settings as LarryHN described, don't forget to enable Express Checkout. It is required. -
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)
Maybe you are looking for
-
Firefox crashed and won't reopen. It giving me a weird message though....
I have a pc and currently using Vista. Thanks! I was using it and it crashed. I restarted my pc and tried reopening it again and it gave me this, "The application had a problem and crashed. Unfortunately the crash report is unable to submit a report
-
Why does iPhoto 9.5.1 not export slideshows?
Why does iPhoto 9.5.1 stall when I try to export a slideshow, using OS 10.9.3? All steps have been completed, and the preview works fine, but the system hangs up at the "Exporting Slideshow" progress window. The bar never fills. Nada!
-
I have 3 add-ons which place themselves in the add-on bar: NetVideoHunter, Adblock Plus, Rikaichan I am no longer able to rearrange them as in the past, using the procedure as quoted from the [[What is the Add-on Bar?]] page. Step three does not appe
-
Can HD Movies be viewed via Component connection?
Does anyone know if an HD rental can be viewed over a component connection? If there's a need for HDMI to be connected, could I still do the actual viewing over component? (I have a TV with no HDMI port, but it will display HD resolution via componen
-
E Business Suite R12 for Window 7
Hi, I am trying to download E-Business Suite R12 for Window 7 32-bit. Anybody knows where I can download this install. Thanks.