Starting Safari with command-line options

I am an old Unix Hacker who just started with Mac. Since scripting is an important
part of old-school UNIX, I do many things via scripting.
My question is: Is there a way to start Safari from the command line using command-line
options that will allow Safari to open up multiple tabs with each tab pointing to a pre-defined
URL?
Thanks,
msprewitt

Hi,
Type this in terminal,
open http://www.google.com http://www.yahoo.com
It will open the two web pages in two tabs. man open for more option.

Similar Messages

SQL Server 2008 Express Installation with command line options , FAILED.

HI,
I Have SQL Server 2005 Express instances on my PC. Now i am trying to install 2008 Express edition with Advance Services(Reporting.)
I am trying to install the SQL Server 2008 Express with command line Options.
/qs /Action=Install /Hideconsole /SecurityMode=SQL /Features=SQL,Tools,RS /InstanceName=XXXXXX /SAPWD="StrongPassword" /SQLSYSADMINACCOUNTS="Builtin\Administrators" /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /RSSVCACCOUNT="NT
AUTHORITY\SYSTEM" /BROWSERSVCSTARTUPTYPE=Automatic /TCPENABLED=1 /NPENABLED=1
But installation exits. It says the previous version 2005 tool are already exists, Remove them to Continue the 2008 Server Installation.
please suggest me how to avoid that check and continue installation by replacing the older tool with 2008 automatically.
regards
Pratap M:)

Have you found any error in event logs?
In my case even after uninstalling all 2005 related components it didn't worked. I had to resort to a brute force way and
remove following registry keys
32 Bit OS: HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90
64 Bit OS: HKLM\Software\Wow6432Node\Microsoft\Microsoft SQL Server\90
Check below threads
http://stackoverflow.com/questions/175881/sql-server-express-2008-install-side-by-side-w-sql-2005-express-fails
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5fc58507-9f40-4213-acbd-32a57c8822d7/cant-uninstall-sql-server-2005-express-tools?forum=sqlsetupandupgrade
Please click the Mark as answer button and vote as helpful if this reply solves your problem

How do I run Safari with a proxy on start up by command line?

Hello,
I am using a piece of software called Sahi to perform automated testing of websites. It uses a local proxy to accomplish this task, so it runs the browser with parameters needed so that that instance of the browser is running with the proxy settings. For some reason it's not correctly setup by default with Safari on the Mac. But it has a configuration file where you can set the command line parameters that it runs the browser with.
So when I use Sahi in its default configuration, it doesn't work because the proxy is not configured, and I get an error ( http://sahi.co.in/forums/discussion/4607/sahi-doesn039t-work-with-safari-5-0-1-o n-macosx )
So I need to set the proxy. When I set the 127.0.0.1:9999 proxy in the System Preferences it works. My question is how do I run Safari so that it provides the proxy settings as a command line option?
This way I can add the command line option to the Sahi configuration file so that it runs Safari properly. I don't want to have the proxy settings system wide because I need other programs to work. I don't want to have the proxy settings set for Safari permanently because I also need to be able to run Safari normally outside of this special context.
Any assistance would be appreciated.

I should mention this is Safari 5.0.1

How do I restart the SNMP agents with the original command line options?

I'm creating an application that changes the SNMP trap target configuration files and then restarts the SNMP agent. I'm currently working with the mibiisa agent. I want to make sure that I restart the service with the new trap targets but with the original command line options. How can I restart the mibiisa service with the same command line options that it originally loaded with?

It is not "Network Time" that is the problem, but actually "SystemStarter." SystemStarter is an interim kludge to enable the work or the old StartupItems until they can be converted to LaunchDaemons or LaunchAgents controlled by launchd. Launcd calls SystemStarter to launch all the unconverted StartupItems. ntpd is now under the control of launchd directly.
Launchctl is the command to load and unload the plist files, but I don't think it has a mechanism to restart a daemon.
There are start and stop commands in launchctl, but the man page indicates that they are for debugging purposes.
I also imagine you could just kill the ntp daemon and let it restart with new settings. It is most likely set to "keepAlive" so that it will automatically restart.

Compiling failed with "unrecognized command line option '-Wl'" error

Helllo,
I have here a fresh installation of Archlinux and I fall into troubles with compiling a few of applications from AUR.
The problem is this:
gcc: error: unrecognized command line option ‘-Wl’
It happens for example with bubblefishymod package from AUR. I've never seen this error.
Any suggestion, what is wrong, please?
I have 64bit Archlinux installation, intel core i5, base-devel package group is installed.

Seems like a straightforward error message. Read about -Wl in "man gcc" if you want to know more.
In the meantime, removing "-Wl" from the LDFLAGS in the Makefile (I used a sed line in the PKGBUILD) should allow you to compile it successfully. Whether or not it works as expected though, is another matter entirely. Contact the author and get him to fix his Makefile.

What are the command line options to start firefox to start in a kiosk mode which restricts the options that a user can select

I would like to use Firefox as my browser but want to restrict the configuration options that a user can do. Is there a command line option to start in a kiosk more in which no toolbars are visible including min/maximise buttons so that only the rendered webpage is visible? I am interested for both Windows and Linux environments.

There is a /wait option for the Windows "start" command to wait for the program to get finished.
*http://technet.microsoft.com/en-us/library/bb491005.aspx
<pre><nowiki>/wait : Starts an application and waits for it to end. </nowiki></pre>

Is there a command line option for VNC to automatically launch in fullscreen mode?

I can launch a VNC window from the command line, as such:
open vnc://username:password@hostname
... but I'd like it to automatically start in full screen mode. Is there a command line option for this?
I'm using an old MacMini purely to connect to another Mac over screen sharing, but when the MacMini boots I'd like it to go straight into the fullscreen of the other desktop.
Many thanks!

Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
* http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

Command line option to specify Bridge master cache

Please allow a bridge command line option to allow the user to select a specific bridge master cache.
The motivation is as follows: I have written a c++ programme to key-word all of my many thousands of photo projects. Essentially each project is in a separate directory on 8 terabytes of networked disk. Associated with each directory is a set of key words. When the appropriate project is selected, I invoke Bridge to open that directory, possibly with a specific images as the "starting image" for that project. Since the master cache files are split (to accomodate the 500,000 max image count supported by bridge), it would be excellent if I can pass a reference to the specific master cache associated with that directory.
A second value of this option would allow the user to create desk-top short-cuts to invoke bridge using an appropriate cache structure. For example, the properties of one short cut could specify the cache file for the current daily use of the Bridge to process images in progress. A second could point the the cache associated with the historical first 400,000 image archived on the network, and a third could invoke bridge pointing to the cache for the next 400,000 image cache - or whatever grouping the user needs to match his workflow when using Bridge as the central focus for various digital assets..
This type of processing allows the user to conveniently invoke bridge according the the needed work flow when multiple cache systems are required. In addition, the multiple desk-top shortcuts would minimize the "error" of having bridge pointed, by accident/neglect, to the incorrect cache structure.
It would also be valuable to allow the user to display the current number of actual image items in a cache system - either as a "view" or "tools" option. This would allow the user to know when it is time to start a new master cache system. Of course, this can be intependently viewed in windows explorer by the count of files in the 1024 or 256 directories - however maybe the cache structure already "knows" this number instantly. Other statistics could be interesting as well - possibly the number of directories known to the cache (possibly the same as the count of directories within the 1024 or 256 directories). Possibly the number of files cached by file type (jpg, tif, psd, cr2, nef, etc) would be of interest to some folks - however, such things should be user-selectable since such analysis might be time intensive and maybe of no interest.
Of course, I do not know if this is consistent with other uses of Bridge - this request is made based upon my use of Bridge as a still photographer and a few videos I have created.
thank you....
tony

I'm going to be technical for a minute, just for the Forum archives...
The Library file location is stored in your "iTunes Prefs.xml" file in<pre>%APPDATA%Apple ComputeriTunes</pre>.
Actually, I should say that if you are using a non-default location, there is a key for "iTunes Library Location:1", e.g.:
<key>iTunes Library Location:1</key>
<data>
QwA6AFwARABvAGMAdQBtAGUAbgB0AHMAIABhAG4AZAAgAFMAZQB0AHQAaQBu
AGcAcwBcAFQAZQByAGkAZABvAG4AXABNAHkAIABEAG8AYwB1AG0AZQBuAHQA
cwBcAE0AeQAgAE0AdQBzAGkAYwBcAHQAZQBzAHQAbABpAGIAcgBhAHIAeQA=
</data>
The "data" is a base64-encoded UTF16-LE string that is the folder containing the "iTunes Library.itl" file and "Album Artwork" folder. In the above case:<pre>C:Documents and SettingsTeridonMy DocumentsMy Music estlibrary</pre>
The key/data pair does not exist if you're using the default Library location.
Similary, there is a key/value pair for "iTunes Library XML Location:1" -- except this part always appears, even if you are using the default location. Also, it is the full path to the file itself, not just the directory containing it. e.g.:<pre>C:Documents and SettingsTeridonMy DocumentsMy Music estlibraryiTunes Library.xml</pre>
Since it doesn't appear that double-clicking on the Library file you want to open works, I'm guessing the only way to swap locations is to edit the preferences file -- either directly, or with a script/program. I could probably write such a program in a 1/2 hour or so... I might just do that right now.

How to pass command line options?

I know that command line options contrary to command line data arguments start with a prefix that uniquely identifies them.
I write an application that will copy files from one folder to another. It should be launched with the syntax as follows:
c:>java my.app.DirectoryScannerConsole
c:>scan ?input ?C:/test/in? ?output ?C:/test/out? ?mask ?*test*.xml? ?waitInterval 60000 ? includeSubfolders false ?autoDelete true
c:>exitSo after launching we have two commands: 'scan' and 'exit'. What should I make in my program to be able to invoke these commands in such a manner?
Edited by: Exaserge on Nov 8, 2008 10:38 AM
Edited by: Exaserge on Nov 8, 2008 10:40 AM

Maybe try using Scanner to read in the line of input, then break the line into an String array, then comparing the Strings in the array.
Something like...
public static void main(String args[])
   Scanner in = new Scanner(System.in);
   String line = in.readLine(); //read in an entire line of input
   String words[] = line.split(" "); //split that line wherever there is a space
   while ( !(words[0].equals("exit")) ) //if they haven't typed in exit
      if (words[0].equals("scan")
          if(words[1].equals("-input"))
             String inputFile = words[2]
          //etc.
      line = in.readLine();
      words = line.split(" ");
}I haven't tried to compile it or anything, so it may not be syntactically correct, but you should get the idea.
Edited by: chickenmeister on Nov 8, 2008 1:02 AM

Trying to install gcc with Command Line Tools - Mountain Lion

I am trying to update the CUDA driver for an NVIDIA GeForce GTX 570 card. To do that, I need gcc installed.
It appears I have not been able to install gcc, and I need help doing this.
I am a newbie to both Terminal commands and to updating CUDA drivers, so please bear with me.
I am running Mountain Lion (10.8.2) on a dual quad core Mac Pro (mid 2010 model).
I have been following the guide here:
http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-mac-os-x/index.html
To install gcc w/o having to install Xcode (I don’t need all of Xcode and so don’t want it installed), I downloaded the “Command Line Tools (OS X Mountain Lion) for Xcode – November 2012” from the Apple Developer Downloads page:
xcode452cltools10_86938211a.dmg
I also downloaded the “Mac OS X CUDA 5 Production Release” from the NVIDIA Developers Download page:
cuda_5.0.36_macos.pkg
I installed the Command Line Tools, and then installed the CUDA 5 Release (driver, toolkit, samples). Both installed successfully.
To verify that gcc was installed, I entered the Terminal command (the guide above says this is how I check):
/usr/bin/gcc –-help
The resulting message was:
i686-apple-darwin11-llvm-gcc-4.2: –-help: No such file or directory
i686-apple-darwin11-llvm-gcc-4.2: no input files
I take it this means I did not successfully install gcc.
Please tell me what I am doing wrong.
NOTE: The steps below may not be of interest to you, since they are steps to verify the CUDA driver was updated (once gcc is successfully installed).
But I included them in the post, in case they are helpful..
I went to “Define the environment variables”.
I entered the command
export PATH=/Developer/NVIDIA/CUDA-5.0/bin:$PATH
I got no message
I then entered the command:
export DYLD_LIBRARY_PATH=/Developer/NVIDIA/CUDA-5.0/lib:$DYLD_LIBRARY_PATH
I got no message
To verify that the CUDA kernel extension is loaded, I then entered the command:
kextstat | grep -i cuda
I got this message:
123 0 0xffffff7f81e69000 0x2000 0x2000 com.nvidia.CUDA (1.1.0)
I then checked the CUDA Toolkit version by entering the command:
nvcc –V
I got the message:
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2012 NVIDIA Corporation
Built on Fri_Sep_28_16:10:16_PDT_2012
Cuda compilation tools, release 5.0, V0.2.1221
To change the directory, I then entered:
cd /Developer/NVIDIA/CUDA-5.0/samples
Then to compile the samples, I entered:
make
The resulting message was:
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
make[1]: Nothing to be done for `all'.
Makefile:79: *** MPI not found, not building simpleMPI.. Stop.
make: *** [0_Simple/simpleMPI/Makefile.ph_build] Error 2
To run the binaries, I changed the directory by entering:
cd /Developer/NVIDIA/CUDA-5.0/samples/C/bin/darwin/release
and then entered
deviceQuery
I got the message:
-bash: cd: /Developer/NVIDIA/CUDA-5.0/samples/C/bin/darwin/release: No such file or directory

(1) When I typed in the command
/usr/bin/gcc –v
I got this response:
Using built-in specs.
Target: i686-apple-darwin11
Configured with: /private/var/tmp/llvmgcc42/llvmgcc42-2336.11~67/src/configure --disable-checking --enable-werror --prefix=/Applications/Xcode.app/Contents/Developer/usr/llvm-gcc-4.2 --mandir=/share/man --enable-languages=c,objc,c++,obj-c++ --program-prefix=llvm- --program-transform-name=/^[cg][^.-]*$/s/$/-4.2/ --with-slibdir=/usr/lib --build=i686-apple-darwin11 --enable-llvm=/private/var/tmp/llvmgcc42/llvmgcc42-2336.11~67/dst-llvmCore/Deve loper/usr/local --program-prefix=i686-apple-darwin11- --host=x86_64-apple-darwin11 --target=i686-apple-darwin11 --with-gxx-include-dir=/usr/include/c++/4.2.1
Thread model: posix
gcc version 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00)
Does this say I successfully installed gcc? 4.2.1 is the latest version?
If I have successfully installed the latest version of gcc, then my problem lies with the installation of the CUDA driver.
If your command worked, then the NVIDIA "CUDA Getting Started Guide" doc I referenced above, which I am following, is just incorrect.
(2) I then went through the same steps as above, and got the same responses, until I got to the "make" command. This time I entered
make clean
And I got the response:
rm -f asyncAPI asyncAPI.o
rm -f cdpSimplePrint cdpSimplePrint.o
rm -f cdpSimpleQuicksort cdpSimpleQuicksort.o
rm -f clock clock.o *.bin
rm -f cppIntegration cppIntegration.o cppIntegration_gold.o main.o *.bin
rm -f cudaOpenMP cudaOpenMP.o
rm -f inlinePTX inlinePTX.o *.bin
rm -f matrixMul matrixMul.o
rm -f matrixMulCUBLAS.o matrixMulCUBLAS
rm -f matrixMulDrv matrixMulDrv.o data/matrixMul_kernel64.ptx matrixMul_kernel64.ptx
rm -f matrixMulDynlinkJIT matrixMulDynlinkJIT.o matrixMul_gold.o matrixMul_kernel_32_ptxdump.o matrixMul_kernel_64_ptxdump.o cuda_drvapi_dynlink.o
rm -f simpleAssert simpleAssert.o
rm -f simpleAtomicIntrinsics simpleAtomicIntrinsics.o simpleAtomicIntrinsics_cpu.o
rm -f simpleCallback simpleCallback.o multithreading.o *.bin
rm -f simpleCubemapTexture simpleCubemapTexture.o *.bin
rm -f simpleIPC simpleIPC.o
rm -f simpleLayeredTexture simpleLayeredTexture.o
Makefile:79: *** MPI not found, not building simpleMPI.. Stop.
make: *** [0_Simple/simpleMPI/Makefile.ph_clean] Error 2
Then I entered
make
And I got the response:
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_10,code=sm_10 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o asyncAPI.o -c asyncAPI.cu
g++ -arch x86_64 -o asyncAPI asyncAPI.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp asyncAPI ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -dc -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o cdpSimplePrint.o -c cdpSimplePrint.cu
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_35,code=sm_35 -o cdpSimplePrint cdpSimplePrint.o -L/Developer/NVIDIA/CUDA-5.0/lib -lcudadevrt
mkdir -p ../../bin/darwin/release
cp cdpSimplePrint ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -dc -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o cdpSimpleQuicksort.o -c cdpSimpleQuicksort.cu
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_35,code=sm_35 -o cdpSimpleQuicksort cdpSimpleQuicksort.o -L/Developer/NVIDIA/CUDA-5.0/lib -lcudadevrt
mkdir -p ../../bin/darwin/release
cp cdpSimpleQuicksort ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_10,code=sm_10 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o clock.o -c clock.cu
g++ -arch x86_64 -o clock clock.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp clock ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_10,code=sm_10 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o cppIntegration.o -c cppIntegration.cu
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o cppIntegration_gold.o -c cppIntegration_gold.cpp
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o main.o -c main.cpp
g++ -arch x86_64 -o cppIntegration cppIntegration.o cppIntegration_gold.o main.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp cppIntegration ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -lineinfo -Xcompiler -fopenmp -gencode arch=compute_10,code=sm_10 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o cudaOpenMP.o -c cudaOpenMP.cu
ptxas warning : Command line option '--generate-line-info' not supported for 'sm_1x architecture', will be ignored
g++ -arch x86_64 -o cudaOpenMP cudaOpenMP.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart -lgomp
mkdir -p ../../bin/darwin/release
cp cudaOpenMP ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_10,code=sm_10 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o inlinePTX.o -c inlinePTX.cu
g++ -arch x86_64 -o inlinePTX inlinePTX.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp inlinePTX ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_10,code=sm_10 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o matrixMul.o -c matrixMul.cu
g++ -arch x86_64 -o matrixMul matrixMul.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp matrixMul ../../bin/darwin/release
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o matrixMulCUBLAS.o -c matrixMulCUBLAS.cpp
g++ -arch x86_64 -o matrixMulCUBLAS matrixMulCUBLAS.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart -lcublas
mkdir -p ../../bin/darwin/release
cp matrixMulCUBLAS ../../bin/darwin/release
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o matrixMulDrv.o -c matrixMulDrv.cpp
g++ -arch x86_64 -o matrixMulDrv matrixMulDrv.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -framework CUDA
mkdir -p ../../bin/darwin/release
cp matrixMulDrv ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_10,code=sm_10 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o matrixMul_kernel64.ptx -ptx matrixMul_kernel.cu
mkdir -p data
cp matrixMul_kernel64.ptx ./data
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -o matrixMulDynlinkJIT.o -c matrixMulDynlinkJIT.cpp
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -o matrixMul_gold.o -c matrixMul_gold.cpp
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -o matrixMul_kernel_32_ptxdump.o -c matrixMul_kernel_32_ptxdump.c
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -o matrixMul_kernel_64_ptxdump.o -c matrixMul_kernel_64_ptxdump.c
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -o cuda_drvapi_dynlink.o -c cuda_drvapi_dynlink.c
g++ -arch x86_64 -o matrixMulDynlinkJIT matrixMulDynlinkJIT.o matrixMul_gold.o matrixMul_kernel_32_ptxdump.o matrixMul_kernel_64_ptxdump.o cuda_drvapi_dynlink.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -framework CUDA
mkdir -p ../../bin/darwin/release
cp matrixMulDynlinkJIT ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o simpleAssert.o -c simpleAssert.cu
g++ -arch x86_64 -o simpleAssert simpleAssert.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp simpleAssert ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_11,code=sm_11 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o simpleAtomicIntrinsics.o -c simpleAtomicIntrinsics.cu
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o simpleAtomicIntrinsics_cpu.o -c simpleAtomicIntrinsics_cpu.cpp
g++ -arch x86_64 -o simpleAtomicIntrinsics simpleAtomicIntrinsics.o simpleAtomicIntrinsics_cpu.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp simpleAtomicIntrinsics ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_10,code=sm_10 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o simpleCallback.o -c simpleCallback.cu
g++ -arch x86_64 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o multithreading.o -c multithreading.cpp
g++ -arch x86_64 -o simpleCallback simpleCallback.o multithreading.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart -lpthread
mkdir -p ../../bin/darwin/release
cp simpleCallback ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o simpleCubemapTexture.o -c simpleCubemapTexture.cu
g++ -arch x86_64 -o simpleCubemapTexture simpleCubemapTexture.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp simpleCubemapTexture ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o simpleIPC.o -c simpleIPC.cu
g++ -arch x86_64 -o simpleIPC simpleIPC.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp simpleIPC ../../bin/darwin/release
/Developer/NVIDIA/CUDA-5.0/bin/nvcc -m64 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=sm_35 -I/Developer/NVIDIA/CUDA-5.0/include -I. -I.. -I../../common/inc -o simpleLayeredTexture.o -c simpleLayeredTexture.cu
g++ -arch x86_64 -o simpleLayeredTexture simpleLayeredTexture.o -Xlinker -rpath /Developer/NVIDIA/CUDA-5.0/lib -L/Developer/NVIDIA/CUDA-5.0/lib -lcudart
mkdir -p ../../bin/darwin/release
cp simpleLayeredTexture ../../bin/darwin/release
Makefile:79: *** MPI not found, not building simpleMPI.. Stop.
make: *** [0_Simple/simpleMPI/Makefile.ph_build] Error 2
There is still an "Error 2" at the end, so something still appears to be wrong.

[SOLVED] gcc: error: unrecognized command line option '-V'

Hi.. this is my first post but I always read the forum to solve my problem! ;) thank you to all!!!! sorry for my bad english in advanced...
This is my problem:
I have Archlinux x86_64 with Gnome (last version).
I try to install the driver for my printer epson sx218 but when I compile the bash show:
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
now, I see the config.log file and I see the line:
gcc: error: unrecognized command line option '-V'
my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl, -O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
this is my full config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by epson-inkjet-printer-filter configure 1.0.0, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure LDFLAGS=-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed --prefix=/opt/epson-inkjet-printer-workforce-320-sx218
## Platform. ##
hostname = localhost
uname -m = x86_64
uname -r = 3.9.3-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Sun May 19 22:50:29 CEST 2013
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1989: checking for a BSD-compatible install
configure:2045: result: /usr/bin/install -c
configure:2056: checking whether build environment is sane
configure:2099: result: yes
configure:2127: checking for a thread-safe mkdir -p
configure:2166: result: /usr/bin/mkdir -p
configure:2179: checking for gawk
configure:2195: found /usr/bin/gawk
configure:2206: result: gawk
configure:2217: checking whether make sets $(MAKE)
configure:2238: result: yes
configure:2480: checking for gcc
configure:2496: found /usr/bin/gcc
configure:2507: result: gcc
configure:2745: checking for C compiler version
configure:2752: gcc --version >&5
gcc (GCC) 4.8.0 20130502 (prerelease)
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2755: $? = 0
configure:2762: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.8-20130502/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-gnu-unique-object --enable-linker-build-id --enable-cloog-backend=isl --disable-cloog-version-check --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --with-linker-hash-style=gnu --disable-install-libiberty --disable-multilib --disable-libssp --disable-werror --enable-checking=release
Thread model: posix
gcc version 4.8.0 20130502 (prerelease) (GCC)
configure:2765: $? = 0
configure:2772: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2775: $? = 1
configure:2798: checking for C compiler default output file name
configure:2825: gcc -march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed conftest.c >&5
cc1: error: argument to '-O' should be a non-negative integer, 'g', 's' or 'fast'
configure:2828: $? = 1
configure:2866: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "epson-inkjet-printer-filter"
| #define PACKAGE_TARNAME "epson-inkjet-printer-filter"
| #define PACKAGE_VERSION "1.0.0"
| #define PACKAGE_STRING "epson-inkjet-printer-filter 1.0.0"
| #define PACKAGE_BUGREPORT "epson@localdomain"
| #define PACKAGE "epson-inkjet-printer-filter"
| #define VERSION "1.0.0"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2873: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
## Output variables. ##
ACLOCAL='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run aclocal-1.10'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run tar'
AR=''
AUTOCONF='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoconf'
AUTOHEADER='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoheader'
AUTOMAKE='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run automake-1.10'
AWK='gawk'
CC='gcc'
CCDEPMODE=''
CFLAGS='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
CORE_LIBRARY_PATH=''
CORE_RESOURCE_PATH=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CUPS_IMAGE_LIBS=''
CUPS_LIBS=''
CUPS_SERVER_DIR=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
DL_LIBS=''
DSYMUTIL=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
F77=''
FFLAGS=''
GREP=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LDFLAGS='-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run makeinfo'
NMEDIT=''
OBJEXT=''
PACKAGE='epson-inkjet-printer-filter'
PACKAGE_BUGREPORT='epson@localdomain'
PACKAGE_NAME='epson-inkjet-printer-filter'
PACKAGE_STRING='epson-inkjet-printer-filter 1.0.0'
PACKAGE_TARNAME='epson-inkjet-printer-filter'
PACKAGE_VERSION='1.0.0'
PATH_SEPARATOR=':'
RANLIB=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STDCPP_LIBS=''
STRIP=''
VERSION='1.0.0'
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_F77=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='$(SHELL) /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/usr/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/opt/epson-inkjet-printer-workforce-320-sx218'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
#define PACKAGE_NAME "epson-inkjet-printer-filter"
#define PACKAGE_TARNAME "epson-inkjet-printer-filter"
#define PACKAGE_VERSION "1.0.0"
#define PACKAGE_STRING "epson-inkjet-printer-filter 1.0.0"
#define PACKAGE_BUGREPORT "epson@localdomain"
#define PACKAGE "epson-inkjet-printer-filter"
#define VERSION "1.0.0"
configure: exit 77
any idea to solve? I searched around but can not find anything.. :'(
Last edited by liberato83 (2013-05-24 13:25:18)

Are you using AUR https://aur.archlinux.org/packages/epso … 320-sx218/ ?
I updated the PKGBUILD to remove the line that says 'gcc -V >&5' from the configure file
libtoolize
sed -i 's/gcc -V >&5//' configure
chmod +x configure
but it still doesn't build:
==> Starting build()...
libtoolize: putting auxiliary files in `.'.
libtoolize: linking file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for dlopen in -ldl... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for memset... yes
checking for strdup... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/raster/Makefile
config.status: creating src/raster/blendSource/Makefile
config.status: creating src/memory/Makefile
config.status: creating src/pagemanager/Makefile
config.status: creating src/filteropt/Makefile
config.status: creating config.h
config.status: executing depfiles commands
cd . && /bin/sh /home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run automake-1.10 --gnu
/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing: line 54: automake-1.10: command not found
WARNING: `automake-1.10' is missing on your system. You should only need it if
you modified `Makefile.am', `acinclude.m4' or `configure.ac'.
You might want to install the `Automake' and `Perl' packages.
Grab them from any GNU archive site.
cd . && /bin/sh ./config.status Makefile
config.status: creating Makefile
cd . && /bin/sh /home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoheader
rm -f stamp-h1
touch config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
make all-recursive
make[1]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0'
Making all in src
make[2]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
cd .. && /bin/sh ./config.status src/Makefile depfiles
config.status: creating src/Makefile
config.status: executing depfiles commands
make[2]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
make[2]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
Making all in memory
make[3]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
cd ../.. && /bin/sh ./config.status src/memory/Makefile depfiles
config.status: creating src/memory/Makefile
config.status: executing depfiles commands
make[3]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
make[3]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
/bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../ -D_FORTIFY_SOURCE=2 -fsigned-char -O2 -MT memory.lo -MD -MP -MF .deps/memory.Tpo -c -o memory.lo memory.c
../../libtool: line 482: CDPATH: command not found
libtool: Version mismatch error. This is libtool 2.4.2, but the
libtool: definition of this LT_INIT comes from an older release.
libtool: You should recreate aclocal.m4 with macros from libtool 2.4.2
libtool: and run autoconf again.
make[3]: *** [memory.lo] Error 63
make[3]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...

Windows NT service command line options?

Hi all
Is it possible to start the Weblogic 5.1 (SP8) NT service with the following
command line options:
-Xnoagent
-Djava.compiler=NONE
-XDebug
-Xrunjdwp:transport=dt_socket,server=y,address=<port>,suspend=n
If so, how?
Many thanks in advance
Craig

There is a tool in one of the MS kits that allows you to take a command line
and make it into a service. Use that.
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"crg" <[email protected]*REMOVE.THIS*> wrote in message
news:3a66bd6e$[email protected]..
Hi all
Is it possible to start the Weblogic 5.1 (SP8) NT service with thefollowing
command line options:
-Xnoagent
-Djava.compiler=NONE
-XDebug
-Xrunjdwp:transport=dt_socket,server=y,address=<port>,suspend=n
If so, how?
Many thanks in advance
Craig

Why can I not find "command line options" in FF help?

I can't find any information in the knowledge base on windows command line options for Firefox. I actually had to go to "http://kb.mozillazine.org/Command_line_arguments" to find this information. This seems like a fairly common piece of information FF users would want to know. At least, it's not extraordinarily rare.

You have out-of-date plugins with known security issues. You should update them.
* Adobe Shockwave for Director Netscape plug-in, version 10.3
* Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers (new security update releases 10-12-2010)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions: http://www.java.com/en/download/faq/remove_olderversions.xml
#* After the installation, start Firefox and check your version again.

Split PDF by pages using command line options

Hi,
I am after a product to split a PDF file by pages / bookmark using command line options. It would be good, if the product comes with functionality to call from VB/.NET SDK.
I googled and came across many products, out of these following looks good. Has anyone used this. Please suggest me.
www.neeviapdf.com
www.coherentpdf.com
Thanks
Sarav

You are posting in the wrong forum. This forum is for Acrobat Scripting.

Launch executable with command line arguments

I have a programmer that I need to launch in my cvi code. I tried the system command and lauchexecutable command but cannot get the programmer to lauch correctly. If I run it from the command prompt or create a windows shortcut it works fine. Here is the shortcut I created:
C:\TPD\SAVS20P3\asix\up\up.exe /e c:\tpd\savs20p3\q33.hex/erase /q /p
I'm trying to run the up.exe software with /e c:\tpd\v20_hex\v20.hex /erase /q /p as the command line paramters.
I tried the following code which created the above path with command line
strcpy(filename,"C:\\tpd\\savs20p3\\asix\\up\\up.exe /e c:\\tpd\\savs20p3\\hex_ee\\"); ///e c:\\tpd\\savs20p3\\hex_ee\\"");
strcat(filename, hfile);//hex file name will change dynamically
strcat(filename, "/q /p");
I then tried LaunchExecutable(filename) and system(filename). The system functions gives an error. Its trying to lauch the /e c:\tpd\v20_hex\v20.hex file
any suggestions. I beieve its a simple syntax error.

Well, apart evident typos in the code you posted, which is not creating the command line you stated, I can only think that before "/q" you should add a space to separate the option from the filename.
This code should create the correct command line:
strcpy (hfile, "c:\\tpd\\v20_hex\\v20.hex");
strcpy (filename, "C:\\tpd\\savs20p3\\asix\\up\\up.exe /e ");
strcat (filename, hfile);
strcat (filename, " /erase /q /p");
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Starting Safari with command-line options

Similar Messages

Maybe you are looking for