Starting sap-system from MS-DOS without SAP Management Console?

Hi,
I want to start the sap-system from MS-DOS without using SAP Management Console.
Is this possible?
Which file must be started?
Thanks for your help.
Regards
Stefan

Hi Stefan!
Try this:
startsap name=<SID> nr=<InstNo> SAPDIAHOST=<host>
Regards,
Carsten

Similar Messages

How to stop start SAP system from SAP transactions?

Hi Experts,
How can i stop start the SAP system from SAP screens? Are there any transaction for this need?
thanks,
philaphi

Hi,
Use Tcode RZ03 --> Control --> Stop SAP Instance.
Best Regards,
Sachin.

Bulk Load into SAP system from external application

Hi,
Is there a way to perform a bulk load of data into a SAP system from an external application?
Thanks
Simon

Hello,
My external application is a C program and I think I want to use IDocs and RFC to communicate with the SAP system.
Simon

Getting error while try to open SAP system from GUI

Hi All,
When I try to open any SAP system from GUI I am getting below dump error message. Please suggest on this.
Thanks & Regards
Surender

Hi Surender,
Is it a general user issue or are you the only user facing that issue ? Does the error occur right after you enter user/password ?
From the GUI session status bar, I see " Memory Low. leave the transaction before taking a break".
This looks like a improper memory configured system. I would suggest that you review your memory parameters as per the SAP note 146289.
If you already have the memory parameters set to at least the values suggested by that note, please further increase the parameters below:
abap/heap_area_total
abap/heap_area_dia
Hope that helps.
Kind regards,
Eric

Launch a RFC in a SAP system from Redwood CPS

Hi,
How can I launch a rfc in a SAP system from Redwood ?
Ex : in SE37, the function DATE_GET_WEEK, with a date (DD.MM.YYYY) as input parameter returns the corresponding week (YYYYWW)
Regards.

Hi,
SAP CPS uses an RFC to communicate with a target SAP system via the XBP interface so that Jobs can be executed. The CPS executable only knows of the calls that are appropriate to that interface or function modules created when CPS transports are loaded. If there was an RFC type interface that exposed your function to an external executable then of course CPS could execute the executable.
Regards,
Simon

Not Able to see SAP systems in List of Available SAP Systems for Crystal R

Hi All,
We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see any SAP systems in the list of 'Available SAP Systems'.
How to Add SAP systems to this list.
Thanks,
Chindam Praveen Kumar.

1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
ingo

Is it possible for non-sap systems to consume BDOCs without conversion?

Hi All,
I am new to CRM. I use SAP Jco API's to connect to SAP from my java application. Similarly now i want to connect to CRM.
Basically the required is to consume or send BDOC across Java application (non-sap system) and SAP CRM.
1. Is there a way to fetch the BDOC info from Jco API's and then consume them in Java application?
2. I read about XIF adapter in CRM, It says convert BDOC to IDOC.
Can you tell me if BDOC's can be sent out of SAP to non-sap systems as is without convert to IDOC or should it be always i have to convert to IDOC/XML to consume from non-sap systems ?
You quick reply is greatly apprciated.
Thanks,
Sowmya

Hi,
Yes. It is possible.
You can use the standard XML interface for Business Partner in the name space http://sap.com/XI/ABA.
Regards,
Masa

Want to access non SAP system from EP

Hey Guys,
We are having a system (CRMS) which is a non SAP system. I know through EP we can connect to the non SAP system.
Can somebody pls tell me the steps to do this. I want to access the data from non SAP system on Enterprise Portal.
Pls provide me the useful links / doc.
Thanks in advance.
NIkesh Shah

Hello Nikesh,
As I mentioned, kindly check up on help.sap.com.
Anyways:
Create an HTTP system using the System Templates Provided. Instead of selecting SAP Systems you select HTTP system. Provide parameters:
Authentication method: POST
Authentication Type: Server
URL Parameter for Password & URL Parameter for Username: This you can get by doing a View Source on the Login Page of your CRMS appln. e.g. <input type = "hidden" name ="user"> -> So in this case you pick up user
In User management property select Usermapping and admin,user
Now create a URL iView:
System: Select the 1 you created.
URL: URL to your application till before any query string starts.
REQUEST Methid: GET
URL Parameter 1: <the user param from the source> TYPE = Mapped User
URL Parameter 2: <the pwd param from the source> TYPE = Mapped Password
Enter the user mapping for that user and test the iview.

Call to Web Sevice in External (non SAP) system from SAP CRM

Hi,
I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
Can you please tell me:
1. What settings/object needs to be maintained in SAP in order to make this call.
2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
Please explain in detail
Thanks,
Mike

Hi Oliver,
I have gone through the documentation and had been able to create a proxy object, uploaded the WSDL file (from local directory) and created logical port,
However, when testing the service, I didn't received a sucess message but
<CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE>ERROR_WEBSERVICE_RUNTIME_INIT</CODE>
<ERRORTEXT>Error when instantiating the Web service runtime (Error when initializing SOAP client application: ' error_text' )</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
What might be the Problem ?

Call to webservice External (non sap) system from SAP CRM

Hi,
I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
Can you please tell me:
1. What settings/object needs to be maintained in SAP in order to make this call.
2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
Please explain in detail
Thanks,
Mike

Hi,
Check this
Calling web service from ABAP - version 4.6C

Regarding posting invoice to sap system from non r/3 system

HI experts,
                I have to create or change the existing invoice in sap system by using the idoc. Idoc has been extended to meet customer requirements. for creating i am using BAPI_INQUIRY_CREATEFROMDATA2 and for changing i am using BAPI_CUSTOMERINQUIRY_CHANGE in the same function module Z_IDOC_INPUT_INQUIRY_CREATEFRO (standardd one: IDOC_INPUT_INQUIRY_CREATEFROMD)
         It is working fine for the creating but it is going into dump for change by giving error messge fm is not called properly. I am passing same all parameters to the change bapi like i have passed for the Creating bapi. please help me out in this.
Thanks & regards,
Prasanna
   *good solutions will be rewarded***

Hello Prasanna,
Go to transaction SE37, put in 'BAPI_INQUIRY_CREATEFROMDATA2' and use menu entry
- Goto - Documentation - Function Module Documentation
There you can find a description of the various parameters for that BAPI.
Regards,
Michael

Extract Tables/views into ECC 5.0 SAP system from Non-SAP system

Hi,
I am looking for some inputs on how to set up the following scenario of extracting data stored in tables/views in a non-sap external system into my SAP ECC 5.0 SAP database.
Currently we are using a middleware between SAP and the external system to fetch data. I would like to get rid of the middleware and set up a scenario to call this non-sap external system and pull data stored in views into our SAP system directly. Is that possible in SAP version 5.0? If yes let me know the steps to be performed... do I need to set up XI ?

maybe you can access sap data using some connector such as java or .net connector.

Restrictive connection to SAP system from J2EE

Hi,
I am using NW04s SP15. I have a webservice defined in stateless session bean. In my web service I am connecting to SAP system and doing some processing. If there are too many invocations of this webservice all DIA workprocesses of backend system gets used up and CPU runs into 100%. Is there a way I can restrict the number of connections to backend specifically for my application? This has to be configurable at customer end. It should be such that if configured number of DIA workprocesses is exceeded then application should wait and connect again. It should not throw any exception.
I do not want something generic for the J2EE engine, but something specific for my application which is deployed on the server.
Any hints/suggestions would be highly appreciated.
Best Regards,
Suparna

Kumar, in addition to the technical connectivity that Sushma is talking about, if you have security considerations SAP GUI supports SNC, which needs to be configured at both the GUI and server to connect securely. I believe this only secures GUI communication, so if you have other connections between the systems you'll need to have additional security.
There are many hardware routers available, at all cost levels, that will allow you to establish a dedicated VPN (virtual private network) and encrypt all communication. On the extremely low-cost end you can also set up SSL port forwarding for all SAP services (ports 32XX, 80XX, etc), but SSL services have to be enabled on both the front-end and back-end servers.
If you're using web services or other HTTP services, SAP supports the use of HTTPS. Those services need to be set up in ICM control (tcode SICF or SMICM, I can't remember off the top of my head).

Problem transferring file to non-sap system from R/3

Hi,
I used one Z function module to transfer file to non-SAP system as follows.
CALL FUNCTION 'Z_INTERFACE_OUT_1'
       EXPORTING
            INTID           = V_INTID
            EXTRACT_DATASET = P_V_FILENAME.
IF SY-SUBRC = 0.
    WRITE: / P_V_FILENAME, 'file has transferred successfully'.
ELSE.
    WRITE: / P_V_FILENAME, 'file transfer has failed.'.
ENDIF.
I am getting message 'file has transferred successfully'. But it is not found on destination system.Can anyone please tell me the reason.
Thanks,
Venkatesh.

Hi,
You can use transaction code SNOTE to see whether a particuler OSS note is implemented or not.
First navigate to GOTO> Download SAP Note and import the OSS note to your system.
Then navigate to GOTO > SAP Note Browser and check the status of the OSS note, it will show whether it is implemented in your system or not.
Also in the OSS note, there is release specific information. You can check whether that OSS note is applicable to your release or not.
Regards,
Gaurav

Can we call a webservice which is defined outside SAP system from ABAP

Hi All,
i am very new to the ABAP. i would like to know how we can call a webservice which is defined in some other system from the ABAP code. if you are providing any sample code then it will be very help ful for me.
Thanks in advance.
- Siva

yes its possible. check out the weblog
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Starting sap-system from MS-DOS without SAP Management Console?

Similar Messages

Maybe you are looking for