Starting Shared Services Console

Hi Guys,
After successfully installing the Esssbase/EPM I was able to log into Shared Services Console last week. For some reason this week, I only get the 'Internet Explorer cannot display the webpage' now . Apart from installing BI, I haven't really changed any of the initial settings that allowed me to access this service. Can someone kindly suggest how I may resolve this please. I've already started Foundation Services and EPM System. Is there something else I need to start?
Much appreciated. Sam
Edited by: user10048105 on 20/04/2011 05:18

You do need the relational repository database server to be running as well.
You've probably tried all this, but (if this is a Windows / 11.1.2 'play' environment), I'd try stopping absolutely everything and then start up just the relational database and Foundation Services. On my laptop install (Windows 7), I have to right-click the 'Start Foundation Services...' link and select 'Run As Administrator...' to get a successful startup. Another thing to bear in mind is that the Foundation Services service will show as started in the 'Services' panel well before it's actually able to handle requests, so give it a couple of minutes.

Similar Messages

  • Shared Services Console - User is not authorized for the action

    Hi,
    I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
    When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
    User is not authorized for the action
    This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
    The service for EAS is started properly. The one thing that is not configured is HBR.
    Patrick

    Hi,
    What are you trying to achieve, provision a user for essbase studio ?
    EAS is a separate product from Studio.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • EPMA error on Shared Services Console

    Hi,
    While accessing the EPM Architect on Shared Services Console, I found the below error message:
    "Error: Unable to connect to "EPM Architect", ensure that the application is up and running and the user has the appropriate rights to access this feature."
    I tried to resolve the error and referred John's reply for the thread Not able to start my Hyperion EPM Architect -Process Manager it very urgent But no luck.
    Environment: Win 2003 SP2, SQL Server, Installed 11.1.2 EPM.
    Regards,
    Naveen

    Can you log into EPMA without any issues.
    Are you accessing shared services via workspace, if not try going that route and see.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error when trying to access Shared Services Console

    When trying to access the Shared Services Console, I recieved an error message which indicated that an error had occured while performing this operation. http://localhost:28080/interop/jsp/config/defaultError.jsp. The error message from the diagnostics reports indicate that the error has to do with the SSO service error: java.net.ConnectException: Connection refused: connect.
    I am installing EPM 11.1.1.2 Hyperion 9.5
    Any ideas would be great.

    Make sure the Shared Services from the Services have been started and the Database configured with the Shared Services is up.

  • Error: EPM Architect on Shared Services Console

    Hi,
    While accessing the EPM Architect on Shared Services Console, I found the below error message:
    "Error: Unable to connect to "EPM Architect", ensure that the application is up and running and the user has the appropriate rights to access this feature."
    I tried to resolve the error and referred John's reply for the thread Not able to start my Hyperion EPM Architect -Process Manager it very urgent But no luck.
    Environment: Win 2003 SP2, SQL Server, Installed 11.1.2 EPM.
    Regards,
    Naveen
    Edited by: Naveen on Apr 6, 2011 5:20 AM

    I found the solution for my issue.

  • Error while opening Shared Services console

    Hi,
    I have installed and configured HSS 931 (32bit) on win 2003 64bit successfully. App server is WebLogic92 MP3. IE version 6.0
    When i try to launch Shared services console, login page opens with error : "Object doesn't support this method or property". And it stops.
    Error:
    Problem wit this web page might prevent from being displayed properly.....blah..blah...
    Line: 76
    Char: 2
    Error: Object doesn't support this method or property
    Code: 0
    URL:http://localhost:58080/interop/index.jsp
    *I tried running the HSS in foreground and launched the console. Login page loads without any errors. I can login into shared services successfully with default admin user id.
    Its looks weird ..and cannot figure out why i cannot launch HSS console when it is running as service.
    Has anyone experienced this issue?
    Appreciate your response/help..
    Thank you,

    Hi epm,
    why dont you share the version and which patvh you applied to resolve. This would be useful to others
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • How to Create Bulk Users in Hpyerion Shared Services Console

    Hi All,
    I need to create bulk users in Shared Services Console. Since i have huge number of users so i don't want to use Front End. Instead i prefer to upload some CSV sort of stuff.
    For this i export Shared Services console and open its Users.csv file.
    Now my plan is to add all my users here and then will Import that Shared Services Console backup.
    The only point where i am confused is that how should i specify Encrypted Passwords in Users.csv file and also what should i write in "internal_id" column

    If you are using LCM and these are native users then you should be able to enter an uncrypted password and when it is imported it should be encrypted.
    Leave the internal id column blank for new users, test by creating one new user.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Active Directory not showing up in Shared Service Console

    Hi,
    I successfully installed EPM Version 11.1.1.1.0 in my PC, can able to access shared services through URL. But I have not seen Active Directory configured, i believe this will taken care automatically during software installation.
    I was seeing AD last week, this monday I uninstalled and installed, this time missing AD showing up. I make use of NTLM directory.
    Could you please suggest me how to add this AD in shared service console...Its kind of urgent ..please help.
    Regards,
    UB

    But to my surprise, how come I am not able to see this now. I was seeing the AD last week and in fact, i did uninstalls and installs several times, did not face such kind of issues.
    Could you please clarify how this has gone from the shared services.
    Regards, UB

  • Security issue-Hyperion shared services console

    Hi,
    I want a user to access worspace planning but not EAS.
    how to do with hyperion shared services console.
    Regards,
    DK
    Edited by: 972210 on Nov 20, 2012 5:19 AM

    Yes, the user has the Provisioning role and can edit and save user roles, but they cannot update native groups that users are assigned too.

  • Standalone Shared services console

    Hi,
    We have installed Foundation services in EPM 11.1.2.3 version. When we try to open the shared services URL using http://<servername>:19000/interop/index.jsp, the Workspace login page is getting opened.
    My question is - is it not possible to open the shared services console directly ? is any extra configuration required for this ? Or I am using a wrong URL ?
    Thanks

    You are not using wrong url, even Oracle shortcut for "Shared Services URL" is pointed to interop one, but as everyone pointed out it is now embedded to Workspace.
    Regards
    Celvin
    http://www.orahyplabs.com

  • Hyperion Shared Services Console:  EPMCSS-09159 error

    I have assigned Administrative rights in Hyperion Shared Services Console v11.1.2.2.0.66 that are identical to my rights, but they still get the following error when trying to grant access to Native groups:
    "EPMCSS-09159:  Failed to update user relationship to native groups.  User "username" not authorized to update user.  Contact Shrared Services administrator."
    I am able to grant user access to Native groups with the same access.  Let me know if you have any suggestions for me to try.
    Thanks

    Yes, the user has the Provisioning role and can edit and save user roles, but they cannot update native groups that users are assigned too.

  • How to define Migration Definition File in Shared Services Console

    Hi expert,
    I have seen the document and it says that user can define Migration Definition File in Shared Services Console. How to do it? Can you show me the steps? Thanks.
    Best Regards
    Rick

    Hi Rick,
    I think what you are referring to is the "Save Migration Definition" button in LCM within the Shared Services web.
    Basically, any thing that you do within Shared Services LCM utility (GUI) can be saved to .xml file for reusing the migration properties another time.
    See this post for more information
    http://www.in2hyperion.com/websites/in2hyperionblog/post/2011/03/20/Learning-Life-Cycle-Management-%28LCM%29-Command-Line-Security-Synchronization.aspx
    Thanks
    Nick

  • Unable to view Essbase server in Hyperion Shared services Console

    Hi All,
    I installed Hyperion Essbase 11.1.2.1 on windows xp 32 bit.
    I am unable to see the Essbase Server Icon under 'Applications Gruops' in shared services console.
    But "Essbase Server Srudio 11.1.2.1" is available instead of Essbase Server.
    Help how to get "Essbase server" to give provisions to particular applications to particular users.
    Regards
    Sekhar

    Hi Guys,
    The isssue resolved.
    Reason : At the time of Installation i enabled the "Standalone mode Server"
    thats why Essbase cluster was not Registered in Shared services.
    Regards,
    Sekhar.

  • Analytic Server not reflecting in Shared Services Console

    Everything was working fine until yesterday. Now the problem is i am able to connect to analytic server through admin console and excel.
    But for provisioning a user when i log into shared services
    http://servername:58080 brings up the user diectory list. When i click on a username and provision it. I dont find my analytic server on the left hand side (so i am not able to see the cubes available). I just dont have a clue why this is happeneing. There is just one tab as "Hyperion Shared Services" but the analytical server is missing.
    Kindly help me on this. How can i proceed further.
    Additional Info:
    Shared Service admin log has the following details.
    2008-01-22 11:44:48,048 [http-58080-Processor10] ERROR com.hyperion.cas.web.action.CASCommonAction.execute(CASCommonAction.java:122) - Exception : Problem in processing action class.................
    2008-01-22 11:45:12,034 [http-58080-Processor2] ERROR com.hyperion.cas.web.action.CASCommonAction.execute(CASCommonAction.java:122) - Exception : Problem in processing action class.................
    2008-01-22 11:45:12,127 [http-58080-Processor15] ERROR com.hyperion.cas.web.action.CASCommonAction.execute(CASCommonAction.java:122) - Exception : Problem in processing action class.................
    2008-01-22 11:45:13,127 [http-58080-Processor14] ERROR com.hyperion.cas.web.action.CASCommonAction.execute(CASCommonAction.java:122) - Exception : Problem in processing action class.................
    2008-01-22 11:45:21,893 [Timer-0] ERROR com.hyperion.cas.web.util.memory.CASUsedMemoryTracker.run(CASUsedMemoryTracker.java:27) - Memory in use[12742 kb] = Total memory available[115736 kb] - Free memory available[102994 kb]
    2008-01-22 11:50:21,921 [Timer-0] ERROR com.hyperion.cas.web.util.memory.CASUsedMemoryTracker.run(CASUsedMemoryTracker.java:27) - Memory in use[12728 kb] = Total memory available[117243 kb] - Free memory available[104515 kb]
    2008-01-22 11:55:21,916 [Timer-0] ERROR com.hyperion.cas.web.util.memory.CASUsedMemoryTracker.run(CASUsedMemoryTracker.java:27) - Memory in use[12615 kb] = Total memory available[111083 kb] - Free memory available[98468 kb]
    2008-01-22 12:00:21,928 [Timer-0] ERROR com.hyperion.cas.web.util.memory.CASUsedMemoryTracker.run(CASUsedMemoryTracker.java:27) - Memory in use[12790 kb] = Total memory available[114163 kb] - Free memory available[101373 kb]
    2008-01-22 12:05:21,940 [Timer-0] ERROR com.hyperion.cas.web.util.memory.CASUsedMemoryTracker.run(CASUsedMemoryTracker.java:27) - Memory in use[12743 kb] = Total memory available[120782 kb] - Free memory available[108039 kb]

    this similarity is quite odd. Since last friday we are not able to connect o analytical service vua EAS/SS user management and also the analytical server windows services are not starting anymore, essbase logs gives 1 relevant message:
    Analytical Services global application does not exist at Shared Services..
    We have been changing ip numbers of servers (but flused dns cache too) and also changed default admin password.
    I haven't got a clue what to do. Fortunately we are still in in an OTA environment

  • Problems ImportExport.properties (import) In Shared Services Console - SOS

    Hello everyone,
    I have to export all users, groups and provisions of the Security v.11.1.1.3 a Hyperion Planning. Csv file, in which the user can export the file, you see, modify and re-import. Mequeda export if, if I creael. Csv file, but does not make me import the file with the changes, I just import the file without any changes.
    Someone could help me with this pebble to reset the file and it can be used as a capture interface for the user.
    Greetings and thanks

    If you are getting the following error then it is a known issue
    "You have exported security and made minor changes to the export file. When you import the *.csv file, you receive the following messages in a trace:
    Trace:
    " Import : Attempting to parse the XML file
    file:/C:/Hyperion/common/utilities/CSSImportExportUtility/importexport/<filename>.csv
    28:1000:Internal Error. Review the security logs for details.
    Aborting program... "
    The CSSImportExport code in 11.1.1.3 doesn't handle the import data correctly. The issue is documented in unpublished Bug 9012947.
    You can copy \Hyperion\common\utilities\CSSImportExportUtility\cssimportexport.zip from a prior version, and use that version of utility for the import."
    Document - ID 951516.1 on my Oracle Support - You Cannot Import a *.csv File Using the CSSImportExport Utility in 11.1.1.3
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • Changing date on a video clip in iMovie.

    I'm having trouble changing the date on videos that I drop into iMovie. If I change the date once, and then try to amend it later, it will only move it to the day's current date. It never seems to accept another date other than the one I first used.

  • Project in two languages.

    Hello, I have a help project to produce in two languages (English and french), I have two files with each version to be imported into my help project. Is it possible in a single file CHM display my help in English or french whichever is ask or I must

  • XY Graph & Move Axes to middle

    Is there a way to format an XYGraph so that the X and Y Axes are not at the left and bottom as default, but located at x=0 and y=0 (similar to a crosshair section)?  I've been unsuccessful finding a property to control this. Thanks, Paul Attachments:

  • Auto Approval by WF-BATCH after deadline

    Hi All, I am working on following SRM version SRM_PLUS 702 0006 SAPK-70206INSRMPLUS SRM_PLUS for mySAP SRM SRM_SERVER 702 0006 SAPK-70206INSRMSRV SRM_SERVER And am using process controlled workflow. My SC workflow has two level. I have a requirement

  • Network users cannot log in to server

    I have set up a new server from scratch on a new Macmini.  In the main, it works absolutely fine.  Users can log into the sever from client device as registered user and can share the screen with no problem. The users are set up as local network user