Starting stickies without creating a new note automatically

Hi,
I'd like to have stickies auto start at login so that it automatically displays stickies I have on my desktop. However, if by change I have no stickies open Stickies automatically creates a blank one when starting, resulting in a new stickies appearing upon login... :/
Is there a way to tell stickies to start automatically at login but NOT create a new stickies if you have none? Starting hidden isn't an option as this would hide the stickies in case I have one

Hi,
I have no idea about Lotus Notes. But if Lotus Notes has activeX controls for all the functions which you are talking about, yes your requirement can be accomplished.
Have a look at this weblog. https://weblogs.sdn.sap.com/pub/wlg/754. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
This will give you an idea as to how controls can be used within ABAP.
Regards
Raja

Similar Messages

  • Notes App: I start a new note, start typing and the App creates numerous new notes every 3 seconds

    Here is a strange problem I have with my Notes App which I am now using regularly in 10.8.2 since it syncs to all my Macs/iPad/iPhone:
    I open the Notes App. I then wait for it to finish "Updating". I then add a New Note clicking the plus botton. As I type, after a couple of seconds it creates a new Note, so I have 2 notes. Then again as I keep typing - more notes. The "Top" Note has everything I typed and the ones below have 1 line less per Note! i.e. it saves a new note then moves on when I carry on typing!
    This is a very strange problem and it is new to me - I have been using this App for the past few weeks with no problem.

    Thanks for this, it really helped. I had just upgraded to 10.8 on this and the Notes app was installed - so it synced to my other Notes accounts.
    The strange thing was that the default was to my Hotmail account even though I also have iCloud and Gmail accounts set up, too.
    I have followed your suggestion and now only have iCloud Notes - and this works perfectly.
    Thanks!

  • TS4020 Can I change my iCloud email address name without creating a new account?

    CCan I change my iCloud email address name without creating a new account?

    Once you have created an iCloud account and chosen an @icloud.com address to go with it you can't change the address (short of creating an entirely new account).
    However, all is not lost. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • Is it possible to loop AI Voltage readings without creating a new task (NI-DAQmx)?

    I would like to repeatedly make n Analog readings in a program, however, I am unable to accomplish this without creating a new task each time... perhaps I'm doing something wrong.
    Here is my pseudo-code:
    DAQmxErrChk(DAQmxCreateTask("", &taskHandleAI));
    DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandleAI, ...));
    DAQmxErrChk(DAQmxCfgSampClkTiming(taskHandleAI,...));
    Loop start
    DAQmxErrChk(DAQmxStartTask(*taskHandleAI));
    DAQmxErrChk(DAQmxWaitUntilTaskDone(*taskHandleAI, 0.001));
    DAQmxErrChk(DAQmxReadAnalogF64(*taskHandleAI, ...));
    DAQmxErrChk(DAQmxStopTask(*taskHandleAI));
    do_something();
    Loop end
    The first read seems to work fine, however, all subsequet reads gets the following error message:
    DAQmx Error: Measurements: Task specified is invalid or does not exist.
    Status Code: -200088
    Does anyone have a clue what is happening?

    Sorry... is it possible to move a post, or should I simply start another one?
    Also. I don't fully understand what you mean by moving start & stop outside of the loop... the 'do_something()' part parses the reading results that was just read...
    are you saying I should not run StartTask/StopTask for each iteration of the loop? 

  • How to save new edits and text to photo without creating a new file

    I am a new user of PSE 7.  I am able to enhance and add text to my photos but can't save the edits without creating a new PSD PSE file in addition to the original unedited photo.  How do I save the phto itself as edited?

    99jon wrote:
    If you really want to make your changes irreversible then use “Save As” and select file type from the dropdown list e.g. jpeg and enter the exact same file name as the original. Click OK to save and OK to overwrite the original.
    While this of course is the answer to the question, the idea of overwriting the original is simply a bad idea. If you do this, you can never get back to your original and start again. That text will always be there.
    I advise the original poster not to do this. Save your edits as a different name.

  • Publish the website to the root folder (without creating a new folder)

    Hi there! Sure this problem has already been discussed here many times and I'm not the only one who's interested this question, but how can I publish my website using FTP without creating a new folder, just to the root folder of my web hosting? Is that even possible or should I each time drag all the files from the folder created by iWeb and put them to the root folder manually? I'm a little bit confused. Guys help me with this, please! Many thanks in advance!!

    Yes, you're right, it has been discussed for the past several years and yes, you're not the only who's interested in that question.
    A simple googe search confirms it : avoid iweb sitename
    Try it, if you haven't done it already.
    Here's my answer :
    http://www.wyodor.net/htmlegg/TallCard/TallAjax.html?pg=avoidSitename

  • Move album from one library to another without creating a new project

    I accidentally added photos to a new album in the wrong library. I want to move this album with masters and versions to the right library. I exported the album as a project. Then I import the project into the library where I want the album to appear. Importing using either merge or add creates a new project which contains the album. Is there a way to put the album into an already existing project without creating a new one? Using Aperture 3.1.1.

    As Frank said, masters and versions all move together. They can't be separated because a version can't exist without a Master file. In fact, when working in RAW everything you see in Aperture is a version since RAW files need to be rendered for onscreen viewing. The masters are on your hard drive somewhere (managed or referenced) and what you see when you import a RAW file is simply an unedited version 1.
    This is one of the most important concepts to grasp: you're never actually working with the masters. Aperture is just a big database pointing to files and applying instructions (adjustments) to those files in realtime on your screen.
    Just remember that a picture and any of its versions can appear in many albums, in many different places. But as I said earlier, it can only appear in one project. Move a picture from a project and everything follows. Versions are just different renditions of the same master file.
    Not sure I'm clear - hopefully I'm helping a bit!

  • Checking Session in JSP without creating a new one

    Hello, I am trying to convert some old 0.91 JSP's to 1.0,1.1
    In the old versions, there is a SERVLET tag that was used to call a servlet that checked to see if the user had a valid session, and if they didn't it would redirect them to a login page where they could login and their session would get certain data put into it so that things would work.
    In 1.0/1.1 I see that the servlet tag has been replaced along with the BEAN tag. I need a good way to check the session to see if it is valid, without creating a new one if it is not, so that I can redirect them to the correct login page so everything gets initialized properly.
    I know this seems like a broken way to do things, but I am having to do maintenance/upgrade on this and I don't have time to go through the whole thing and make it work differently.
    Anyway, any info anyone can give me would be greatly appreciated.
    If you need any further info from me about what I am doing, don't hesitate to ask for it. I REALLY need some help here. Thanks!

    The method isNew() works well but you can use this
    session=pageContext.getSession().....if earlier you had put in some value into a valid session, then redirecting becomes easy as you can check it this way.....
    <%
    session=pageContext.getSession();
    String sess_id=(String) session.getValue("session_id");
    if(sess_id==null)
    %>
    <jsp:forward page="....." />
    <%
    else
    // do whatever required
    %>

  • When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

    When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

    Chewning wrote:
    I saved some of my music to a Cloud I can't access. Now, they show up as "Purchased" in iTunes, and I'm not given the option of re-downloading OR repurchasing them.
    Music purchased from the iTunes store is not stored in your personal iCloud account, and an iCloud account is not required to redownload them.  You should be able to redownload them as explained here: http://support.apple.com/kb/ht2519.  If you are unable to, contact iTunes store support for assistance by going to https://expresslane.apple.com ; click ‘iTunes', and then 'iTunes Store', then 'Purchases, Billing & Redemption'.

  • Transfer files from PC without creating a new user

    Is it possible to use the Migration Assistant to transfer files (documents and photos) from a PC to my new MacBook WITHOUT creating a new user? And why the frick does the Setup Assistant not warn you on initial startup that if you do not transfer files then - you can only do it by creating a seperate user. This should be simple. Transfer files. sounds easy.

    It is user friendly - that's why it asks you to migrate all of your info in the very beginning during the setup of your new Mac.
    Migration Assistant creates a new user after it does its job. There's no way around that.
    You can either manually move the files over from your PC into the Mac or you can use MA, let it create a new user and then share those files between the new user and your current user. When you're done you can then delete the newly (and now empty) migrated user. You cannot migrate files from another computer and have them placed into your current user.
    Regards,

  • My previous method for payment on itunes was debit card but now I dont have one.  How do I change to no card without creating a new apple id

    My previous method for payment on itunes was debit card but now I dont have one.  How do I change to no card without creating a new apple id?  It tells me to update payment details when I try to update apps but it only has visa, mastercard, amex and maesto.  I dont have any of them.  I did previously use visa but I dont have the card anymore and cant get another one.  Please can someone help me set it up so I dont need a payment method.  Thanks

    Thanks for you reply.  Is that the only way as it would cost me £15?

  • How do I create a new note in Notes 7.1.1

    I am unable to figure out how to create a new note in the iOS 7.1.1 Notes app on my iPad Mini. There is no "New" button like there is on my phone. I have multiple accounts activated, including iCloud, but I cannot find any way in Notes to create a new note in any account.
    I can go to my iPhone, create a new note there in iCloud, and see it on the Mini, I just can't figure out how to create a new one on the iPad...
    I've gotta be missing something obvious, but I cannot figure this out. Does anybody know how to create a new note in the Notes app running iOS 7.1 on an iPad mini?
    Thanks!

    That is an "edit" button. Since there's ALWAYS one of my existing notes "selected", clicking on that icon simply edits the selected item. I can't figure out a way to "unselect" one of my notes (so that none of them are selected), all I can do is "edit".
    There is an actual "New" button in that top bar on the iPHone version of the app, but in the iPad mini, I can't find a "new" button (or a way to unselect all my notes so that edit button would act as a new button).
    Steve

  • How can I create a new page in pages, without creating a new section?

    how can I create a new page in pages, without creating a new section?

    Good morning graywright,
    It sounds as if what you are wanting to do in the Pages application is to insert a Page Break. Follow the steps in this article -
    Pages '09: Inserting a Page Break
    In a word processing document, click where you want the break to occur, and then choose Insert > Page Break. 
    To remove a page break, click at the beginning of the line that follows the break and press the Delete key.
    In a page layout document, to insert a new page in your document, click Pages in the toolbar and choose from the template page options available.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Is it possible to open a new Worksheet without creating a new *.sql file

    Hello Community,
    Declaimer: It may be a trivial question. I just willing to make SQL Developer my default day to day tool.
    I is possible to open a new Worksheet without creating a new *.sql file. Like in an MS Word. If I just need some space to write something and than destroy the file without saying. I can quickly click < ctrl + N > and get the space.
    In SQL Developer to get a new "space"/work sheet i
    -a- < ctrl + N >
    -b- choose "SQL File"
    -c- confirm default location
    -d- choose the connection to be used (right top conner)
    This process is way to long for getting a new sheet to put write an SQL.
    Can you suggest a better way to get a workspace with current connection assigned in no time (like in MS Word)?
    Please ;)
    Yury

    There is no need to create new .sql file.
    I don't know why you need new SQL Worksheet when you can simply do the space by pressing Enter, but you can open a new one from Tools -> SQL Worksheet. There is also a toolbar button for this.

  • Is there a way to reorder or introduce new pages in iBooks Author, without creating a new IBook?

    Is there a way to reorder or introduce new pages in iBooks Author, without creating a new IBook? Is this possible?

    The main thing is...you have a way to move forward with your project.
    If I may offer some tips, learn to customise the template to suit your project...its basically very easy..once you try.Again a search will bring up posts that address this topic.
    IF you do create your own template..save it as a template before using it, that way you have a clean version every time.
    When putting your book together save versions as you go along..later you can delete them.
    If, as .. you seem to have found, you need to change things or want to try other options, you can copy whole chapters or sections and paste in a new order or  into another version of your template. If you copy into a different template or book, the template basic also transfer to the template. Best way to discover what can be done is simply open a new book to play with! Add a few chapters and sections...include some pages..and just drag things around, copy and paste where you choose. Its just learning and after you delete the junk!..BTW, yes, you can have single pages before the first chapter...i.e. I open a copyright page into a chapter...that drag it to the top of the book tree, a blue line will appear ..drop it.
    If you need any help or advice, its available in abundance on this forum.  Have fun...

Maybe you are looking for