Starting the new multiple point Warp stabilizer

I do aerial photography with a large rc helicopter. Camera movement is hard to get rid of. I am looking forward to the upgraded Warp stabilizer "VFX" to help with that. I have been using the Warp in AE and motion tracking. I just don't know how to launch the multi point program in AE cloud.

I'm not sure I understand your problem. This page should help. It has links to tutorials that may answer your question if the page itself does not.

Similar Messages

How do i ensure the new access point is joined the controller or not

How do i ensure the new access point is joined the controller or not

To Verifying that Access Points Join the Controller or not there are two ways as below.
Please go through the step by step to find the APs joined state
When replacing a controller, you need to make sure that access points join the new controller.
Using the GUI to Verify that Access Points Join the Controller
Follow these steps to ensure that access points join the new controller.
Step 1 Follow these steps to configure the new controller as a master controller.
a. Click Controller > Advanced > Master Controller Mode to open the Master Controller Configuration page.
b. Check the Master Controller Mode check box.
c. Click Apply to commit your changes.
d. Click Save Configuration to save your changes.
Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
Step 3 Restart the access points.
Step 4 Once all the access points have joined the new controller, configure the controller not to be a master controller by unchecking the Master Controller Mode check box on the Master Controller Configuration page.
Using the CLI to Verify that Access Points Join the Controller
Follow these steps to ensure that access points join the new controller.
Step 1 To configure the new controller as a master controller, enter this command:
config network master-base enable
Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
Step 3 Restart the access points.

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itsel

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itself but, no success in starting. How do I launch the new version?

Thank you, toinimj59. I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
Solution 1: Sign out from Creative Cloud desktop app and sign back in
Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
Launch Lightroom.

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....

I just started the new update for my iphone and my phone is asking me to connect it to itunes but my computer isn't recognizing my phone being plugged in

i just started the new update for my iphone and my phone is asking me to connect it to itunes but my computer isn't recognizing my phone being plugged in

Click here and buy the DVD.
(89921)

HT4061 I bought a new Iphone and when I started the new one, the old is disabled

I´ve just bought a new Iphone 5c, but I still have the 3G and would like to keep it running with a different tel number.
But as soon as I started the new Iphone the old one started to to accept my passcode and now is disabled.
How can I unlock and back it up.:?

Typically, when someone replaces an iPhone with a newer model and uses the same telephone number, the old iPhone's telephone connection is disabled, but the iPhone still works (nuch like an iPod Touch). Is that your situation?

HT1349 why when i start the new ipad, it shows " Enter the password for the CalDAV account "Yahoo!"?

when I start my new ipad, it shows " Enter the password for the CalDAV account "Yahoo!"? so, i need to tap the cancel button 2 times. after that, i can use my new ipad. I just bought the new ipad 21.05.2012. yesterday, worst to worst, i cannot used my new ipad because after i tap the button cancel 2 times, the new i pad just hanging there with the box Enter the password for the CalDAV account "Yahoo!". It doesn't moved and I hate it so much.

Most likely your yahoo password setup in your mail account is wrong. When you wake your ipad it checks for mail right away(even though it has when it sleeps). Your password or something with your Yahoo mail is wrong.
Assuming caldav is your yahoo name. If its not a yahoo email, you have email setup wrong. Its your email.

Starting the new editor results in short dump

Hi gurus,
When I switch to the new ABAP editor in Nteweaver 7.0 I get a short dump when opening an ABAP source.
The message says:
message_type_x
Does anybody know what the problem is?
We are working with SAPGUI 6.40 patch 16.
Working in the old frontend editor works fine by the way.
Regards,
Wouter Heuvelmans

Hello,
perhaps it's a problem with the SAP GUI version. I think there's already a newer one available.
I would try to create a message in the SAP GUI forum:
SAP GUI
Ok, seems not to be a SAP GUI version problem:
http://help.sap.com/saphelp_nw70/helpdata/en/43/29dee414483fe1e10000000a11466f/content.htm
Best regards
Stephan
Edited by: Stephan Theis on Jan 14, 2008 12:38 PM

Every time I start The new ITunes it comes up with a error pls help

It comes up with erros saying" ITunes cannot run because it has detected a problem with your audio configuration"
and i just bought a new ipod and its ticking me off... if anyone could leave a ipod support phone number that would be nice 2

I followed the instructions on reinstalling stand alone QuickTime, but I'm still getting that error. This just started happening after the recent upgrade. Are they related?

HT201269 I am trying to activate my new Iphone 5s. I have everything backed up to Icloud when I am trying to start the new phone my old email is showing up as my apple ID not allowing me to continue. Does anyone have any idea how to correct this?

v

Only the individual that set the restrictions passcode knows what it is.
If you do not know it or have forgotten it, put the device in DFU mode (google it) and restore as new.

I use Firefox and Windows 7, when I'm using my main account on computer it starts old version of firefox and when I use the guest account it start the new version. Why and how to fix it?

Guy that repairs my computer asked me if i saved new firefox just on guest account, but i didn't, i re-installed it again and again.

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

Is there an easy way to start the new year with an empty mailbox?

I would like to move my 10,000 emails to another folder or mailbox to still be able to search if I need some info... but I would rather not use any space on my macbook pro? I tried to set up a new folder but that will reside on my computer. My new years resolution is to deal with my email on a daily basis and move, file or delete it as I go this year... but I need to start fresh! Thanks for help!

but I would rather not use any space on my macbook pro?
Do a Google search for email storage facilities and check with your isp to see if they offer free storage.

Comp. new email, and I put in a end of sentance char. then start a new sentance on the same line the font changes/gets smaller than my normal Helvetica, Arial.

When composing an email and I end a sentence with any sentence ending character like . ! ? etc. and then start a new sentence on the same line with a space or 2 after the . ! ? etc. ( no carriage return ) the font changes to a smaller font than the one I have set. My set font is Helvetica, Arial . This happens almost all the time, if I backspace to the end of the sentence, and then put in the . ! ? etc. and start the new sentence, sometimes it works ok and the font does not change.

When composing an email and I end a sentence with any sentence ending character like . ! ? etc. and then start a new sentence on the same line with a space or 2 after the . ! ? etc. ( no carriage return ) the font changes to a smaller font than the one I have set. My set font is Helvetica, Arial . This happens almost all the time, if I backspace to the end of the sentence, and then put in the . ! ? etc. and start the new sentence, sometimes it works ok and the font does not change.

Warp Stabilizer in CS6 does not work at all

When using the CS6 Premiere Pro Warp stabilizer it starts to analyze but doesn't start to convert after it has finished analyzing.
- Add the Warp Stabilizer
- Blue bar over picture shows up "Analyzing in Background (Part1 of 2)
- Prozess finishes but nothing happens (Source does not get corrected, orange bar never shows up)
- Another blue bar shows "Click Analyze to begin"
When pressing Analyze the process starts over again without any result.
The used footage is some mxf from a Canon C300
The used PC gots 8 cores, 32GB Memory
Update:
When using a different Clip, or if i shorten the problematic clip, it seems to work now
Info to problematic clip:
File Path: xxx.MXF
Type: XDCAM-HD Movie
File Size: 44.5 MB
Image Size: 1920 x 1080
Frame Rate: 25.00
Source Audio Format: 48000 Hz - 16 bit - Mono
Project Audio Format: 48000 Hz - 32 bit floating point - Mono
Total Duration: 00:00:07:05
Pixel Aspect Ratio: 1.0
Compression Type: MPEG 4:2:2

I could not help laughing at Jim's remark. I remember showing my 20 minute video of our trip to Italy to my brothers way back in 2002. In fact, it was my first Premiere project. I had the sense to cut it way down from 20 one hour tapes to 20 minutes. My oldest brother may have thought he was being a little insulting with his remark, but I was overjoyed. He said "It looks like a PBS travelogue." That was, of course, exactly what I was going for with the video and the voiceover.
In any case, I was able to use Warp Stabilizer this weekend on some footage of a children's birthday party. I can't show the results because of the subject matter. Not that they were doing anything wrong other than savagely beating a poor Super Mario Brother's pinata, but I don't have a release for them all.
I was a bit surprised at how long it took. I have a state of the art PC, and apparently the GPU doesn't help. I liked the results, but I sure would like to know what resources the effect utilizes. This is a screenshot of what it looked like about two minutes into the 11 minute process (the effect window estimated 8 minutes) for stabilizing a 60 second video (1800 frames). I think maybe I will start another thread to inquire about this. The CPU wasn't even breathing hard, the hard drives I am using for cache are in RAID0 - so should be reasonably fast. Hmmm. I wonder?

Steps to send a clip to AE to utilize Warp Stabilizer VFX then back to Premiere Pro CC

So I use Warp Stabilizer for about 200 clips per project. It's effectiveness has shaped how I shoot. It's awesome. Now there's VFX in AE...Can someone layout the steps involved in the following:
a) Taking a clip from Premiere Pro CC and sending it to After Effects CC (I'm not that versed in using AE having not used it in quite a while)
b) Then how to apply the new Warp Stabilizer VFX (I assume just go to effects>distort>WarpStabilizerVFX ???) ... (if there are tutorials on how exactly to use it, especially detailing exactly how to utilize the new feature of isolating what in the frame is to be stabilized that would be great too)
c) Then how to send it back to Premiere Pro CC. (I'm guessing I just save it and let dynamic link take care of the rest?)
I've tried right-clicking on a clip and selecting "replace with AE composition" (is that what I should do?), then applying the effect but I get a "warp stabilizer VFX analysis doesn't work with Collapse Transformations" message so I stopped. If it makes any difference, the majority of my footage is shot at 60p and then interpreted and edited at 23.976fps. Thanks!
NOTE TO STAFF: I've said it before and I'll say it again as someone who uses warp stabilizer several hundred times per week, I still think the default "method" in the settings should be "Position, Scale, Rotation" instead of Subspace Warp because it works FAR better (less wobble and less scaling about 90% of the time). Can't help myself I had to bring that up again here.

a) Select a clip in PrPro timeline, right-click and choose 'Replace With After Effects Composition'. Take care of handles if you might need them (that's rather general tip).
Warning about Collapse Transformation switch indicates that you have 'Scale to Frame Size' option enabled for your clips in PrPro timeline. If that was done intentionally, you can simply toggle the Collapse Transformation switch (small sun icon) off. If not, rather disable 'Scale to Frame Size' for your clips in PrPro timeline.
b) Quite a boring but covering almost all necessary details tutorial on basic work with Warp Stabilizer in AE CC from Adobe TV:
Some advanced techniques from Lynda.com
and Mathias Möhl:
c) When you're happy with your work in AE and going to lock it, render a digital intermediate out of AE, import it into PrPro and replace your dynamically linked composition in the timeline with that DI (see this good old thread on Dynamic Link workflow, pay attention to Todd's comments).
If you leave the 'Include Project Link' checkbox in the Output Module Settings dialog enabled while rendering your DI, you can easily get back to appropriate AE project so as to maybe tweak some settings: just select your DI in PrPro timeline, right-click and choose 'Edit Original'.
Mind the bloating issue, keep the amount of applied Warp Stabilizer instances in a single AE project reasonable.

Starting the new multiple point Warp stabilizer

Similar Messages

Maybe you are looking for