Starting to get aggriva
Let me start by saying hello...
I just bought a Zen Touch 40GB....trying to do a little transferring in the Creative Mediasource, but in the source window it doesnt display my player...how can I fix this so I can start transferring?
TIA
wizegi,
Did you install the application/driver from the CD or did you just downloaded Mediasource from the internet for the installation? If you only downloaded MediaSource from the net, make sure you download and install the 'Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource' also.
Jason
Similar Messages
-
Cannot install windows, starting to get really pissed off with this PLEASE HELP
ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512. -
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard) -
My circa 2007 iMac freezes up, and rainbow wheel appears when this happens. I know the computer is starting to get old but I can't afford a new one at this time and would love to continue using my Mac, but it's frustrating. Most of the time I ONLY have 1 thing open at a time, and keep my tabs down to a minimum. I bought this to do film editing on but with it acting like this I cannot do that. I know I need a ram upgrade (currently running 2 gb) and my OS is old, 10.5.8, but I think even with it being a bit outdated it should run better than this. Would a fresh install or OS upgrade resolve this? Or any other suggestions to keep this clunker chugging along for a little while longer?
How full is the hard drive?
Do you run any virus software or hard drive "cleaner" software like MacKeeper?
If your model is from 2007 you can install up to 6 GBs of RAM.
2 GBs is the barest of minimum RAM for OS X to run on.
Especially if doing video work. You simply do not have sufficient RAM.
Also OS X 10.5.8 Leopard support ended around 2009.
You could update to OS X 10.6 Snow Leopard, at least.
It is available on disc from the Apple store for U.S. $19.99.
I Would seriously upgrade your iMac's RAM to the max. 6 GBs before doing this.
Reliable Mac RAM can be purchase from online Mac RAM source Crucial memory or OWC ( also known as macsales). -
Hi there I've got an iPhone 5 starting to get electric shocks of fone when I leave it on charge! Can you help me in this matter! Fone is constantly over heating the shock I got off phone really hurt! So please can u get intouch on
<Edited By Host>This is a user forum and is not Apple. I would definitely recommend that you stop using your iPhone and take it to be checked.
-
I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products
Instead of getting annoyed, read the User's Guide and try basic troubleshooting.
-
i used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my iphone 5 and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated and im really unsure of whats the case. i really really need help with this. please help asap!!
Presuming you are using a wall charger - it would seem that your battery needs to be looked at in an Apple store
-
On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.) -
I recently started to get an error message "MobileMe Services have stopped working". I use Vista. If I remove the MobileMe program, will it affect syncing with my iPhone or with Google Calendar?
No, just uninstall the MobileMe control panel. All Mobileme services have been discontinued, so the control panel is not doing you any good being in there at present.
-
I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice? My email account is through Optimum online and I am using Airpost Express.
P.S. The error sound "bong" is driving us nuts!Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.
-
Hi...
My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
Waiting for your reply... Thanks and regards...
Turgay Kala
General ManagerUnfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
Here is a list of Apple contacts; there is no email address - you will need to write a letter to their corporate headquarters or call them:
http://www.apple.com/contact/
Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs. -
Can't get WRT54G to start up, gets stuck at "checking computer settings"
Can't get WRT54G to start up, gets stuck at "checking computer settings" at 99% Please help!
If I hit the escape key it will go to the password screen, it looks like the password is already entered for me so I hit enter, but then it just goes back to "checking computer settings" and won't go past 99% again.'
Sorry but the last post mistakenly said the wrong number so I posted this.If you are running the install CD that came with the router, the behavior you describe is exactly what happened when I tried using the CD today. The CD didn't seem to work with my computer's fixed IP address (not in the 192.168.1.0 network.)
What worked for me was to set my computer to have the fixed IP address 192.168.1.2. Then I was able to contact the router using its web interface at 192.168.1.1 amd make the necessary settings.
The password had NOT been changed from the default despite the install CD software seemingly accepting a new password. The default password worked.
Paul -
Production order start date gets incremented by 1 day
Hi,
I have a scenario where in when the Planned Order gets converted to Production Order the Start date gets incremented by 1 day.
If the planned order date is 11.02.2009 after converting to Prod Order it shows the start date as 12.02.2009.
Can any please help me in resolving this issue,
with rgds
Ranjith SinghDear,,
Please run the MRP MD02 with Scheduling- 2 Lead time scheduling.
Planeed order date may be from in house production time which is lot size independent.
But production order date is from routing time which are lot size depnendent.
Hope clear to you or come back if any problem.
Regards,
R.Brahmankar -
Imac not starting up getting folder icon
imac not starting up getting folder icon
i got the same sithuation ..
apple icon and stop icon and folder icon alternating .. on grey screen.
I tried a NVRAM / PRAM reset using Option + Command + P + R buttons (hence refered to as "combo")
Press and hold the combo when you start the mac .. before the grey screen appears.ystem second time ..
keep holding until the mac restarts again (takes about 5-6 sec).
voila -
Just recently my iPad started to get lazy on me I'll go on a website and it has trouble moving through the different applications within it. It has nothing to do with the wifi because it's doing it no matter what wifi it is using at the time?
Not sure what you are talking about.
Maybe you are looking for
-
Problem with Photos in Camera Roll after 4.0.1
Hello, I have a 16GB iPhone 3G. I updated to iOS4.0 the day it came out, and other than the slowness that everyone else was reporting, I didn't have any other issues. When I updated to 4.0.1, everything seems a touch better performance wise, but I fo
-
How to use Help View 2 in standalone Winform app similar to VS Package Help2 from DTE2
Hello, We are successfully obtaining a DTE2 object and then the Help2 object to connect our context id names with triggering the Help Viewer 2 in a VS package but can't seem to do the same outside of VS. Here's a sample of how we handle getting it
-
Biginner's question about catch statement
hi im just a biginner normally u guys write catch statement like catch (FileNotFouldException exception) System.out.println (exception); something like that . but what is the exception here is it object name? or class name or what i mean the word exc
-
TS3297 Error when I use search function in itunes store and select an artist
When I use search function in itunes store and select an artist I get this message. Microsoft visual C++ run time library. Prog C:\progfiles\itunes\itunes.exe R6025 - Pure virtual function call . It then shuts down itunes and cannot provide a solut
-
I want to start with audio on a timeline and add photos. Why is this not possible in the new confusing version of iMovie? Yrs, Unspeakably Frustrated