Starting up in single-user mode problem

I'm trying to start up in single user mode using the Apple article. I ran fsck and everything checked out fine but when I type /sbin/mount -uw / I just get another prompt(#). I want to restore defaults because the users pane is blank. Iv'e tried trashing prefs,ect with no change. I'm sure i'm typing it in correctly. Any suggestions wil be appreciated.
iMac G5 1.8 17   Mac OS X (10.4.3)  

I'm working with an iBook 600 OSX 10.4.3 that had a problem with a dialog box constantly coming up asking for the keychain password which had no password and you could just cancel out of it. I deleted some keychain user info and that's when the accounts pane became an empty window. So I'm going to use the Terminal to restore from defaults. I'm assuming that I won't loose any data doing this. It looks like my only option other than a wipe of the hard drive.
iMac G5 1.8 17   Mac OS X (10.4.3)  

Similar Messages

  • MacBook randomly starting up in single-user mode

    Hi, for a few weeks now my MacBook's been starting up in single-user mode by itself, without me touching anything. The thing is, it only happens about half the time - otherwise it's booting up normally. I wiped my drive and reinstalled Lion, ran fsck and used disk utility several times, but it's still happening.
    Anyone got any idea of what could be the problem?
    Thanks.

    My friend, you are onto something Turning my keyboard on *after* startup for the last week and it hasn't happened once! Any idea why it's doing that? Thanks!

  • Powerbook -can't start up in single user mode or from CD-why?

    My daughter was gifted a Powerbook (15"). I've upgraded it to 10.5.8. It has enough speed, (1.67 Ghz), 2 gigs RAM- but it is a sticky little machine- it freezes a lot. Froze twice during the upgrade, froze once during login, Froze once while trying to do a software update, froze once while trying to get into the system preferences. It freezes pretty consistently after 15-30 minutes or so, no matter what it's doing -if a program is running or not. I tried downloading AppleJack to run a diagnostic. That requires starting up from single user mode. I tried to do that , but the machine just opens to the login screen. I also tried running TechTool from the CD, and the machine wouldn't start up from CD either. What should I try next?

    Try this one for some information.

  • IMac G5 only starts up in Single-User Mode

    I am using an iMac G5 with the lastest version of Tiger.
    I was trying to make a my.cnf file for MySQL for it to start logging queries, however was having some trouble doing so. After restarting MySQL a few times it would not start up any more, so I tried restarting the computer.
    After doing this Personal Web Sharing (httpd) would say that it was running although would not serve pages. So I tried restarting httpd which got it running properly, however I still had the same problem with MySQL, where it would not start running (the Preference pane would not respond when clicking "Start".)
    So I tried restarting again. Now my iMac will only boot into single-user mode.
    I read somewhere about modifying the boot-args, however have not had a chance to try it yet. I don't see why this would do anything however, as I'm not sure why that would have been changed in the first place?
    Has anyone heard of a similar instance, which is possibly related to MySQL?
    Thank you in advance for any help.
    - Jeff
    G5 iMac   Mac OS X (10.4.7)  

    I solved this. I was able to boot up in verbose mode and note that a certain missing file '/etc/hostconfig' was mysteriously missing and causing an error at the boot-up. I was able to boot this mac up in Target Disk mode and copy the file into the /etc/ directory from a backup through another Mac and now it's working fine, thank G-d!
    - Jeff

  • Unable to start up in "Single User Mode."

    I am on an Intel Mac Pro. I can't seem to start up in the Single User Mode.
    I hold down the Command and S keys during startup, but always get to my regular screen, logged in to my account. I changed the login options from automatic to off, but the same thing still happens. Any help would be appreciated.

    Hi
    Have you possibly set yourself a firmware password? Further instructions here:
    http://support.apple.com/kb/ht1352
    Tony

  • MBP starts up in Single User Mode by default..

    I restarted the machine because the trackpad was acting up. After file vault reclaimed unused disk space, the computer restarted with a black screen with "localhost :/ root#" in the upper left screen. I know very little unix so please forgive my lack of lingo.
    How can I possibly get back to the graphical multi user login? I have tried to restart in safe mode and from the install dvd but they just bring me back to the "localhost :/ root#" black screen. I have also restarted holding down the option key to select a drive, which I set to my drive name, and same thing-- Apple logo on a grey screen, spinning gear, then black screen localhost :/ root#. Only thing I havent tried that im aware of is target mode, but my other computer (Rev A. iMac) which is the machine I am writng this from is on OS 9 with no fire wire and just a 4g drive.
    So I need some advice if you have any. Hardware appears fine save for the trackpad and button being touchy. Apple has already replaced my swelling battery. They told me the new mbp's have a barrier between the the battery and trackpad assembly, (a prior neglected, inherent design flaw).
    I do have a new USB external hd. Is there any way to login my home folder and completely copy the home folder contents to it in single user mode? If I could do this, I would at least be able to keep my itunes librarys, playlists, keychain data, mail, etc.. Thanks in advance for any help any of you may have

    Ok, I did the dmesg command at the prompt. Here is word for word what it spit out:
    localhost:/ root# dmesg
    hi mem tramps at 0xffe00000
    PRE enabled
    standard timeslicing quantum 10000 us
    vmpagebootstrap:513016 free pages
    migtable_maxdispl = 71
    Enabling XMM register save/restore and SSE/SSE2 opcodes
    96 prelinked modules
    ACPI CA 20060421
    AppleIntelCPUPowerManagement: ready
    AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of The University of California. All Rights Reserved.
    using 10485 buffer headers and 4096 cluster IO buffer headers
    Enabling XMM register save/restore and SSE/SSE2 opcodes
    Started CPU 01
    IOAPIC: Version 0x20 Vectors 64:87
    ACPI: System State [S0 S3 S4 S5] (S3)
    Security auditing service present
    BSM Auditing Present
    disabled
    rooting via boot-uuid from /chosen: 00001B5D-7D26-0000-2F5D-000090200000
    Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    USB caused wake event (EHCI)
    FireWire (OHCI) Lucent ID 5811 PCI now active, GUID 0016cbfffe523440; max speed s400.
    Got boot device =IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT 2@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDr iver/ST9100824AS Media/IOGUIDPartitionScheme/Customer02
    BSD root: disk0s2, major 14, minor 2
    CSRHIDTransitionDriver::probe:
    CSRHIDTransitionDriver::start before command
    CSRHIDTransitionDriver::stop
    IOBluetoothHCIController::start Idle Timer Stopped
    disk0s2: 0xe0030005 (UNDEFINED).
    localhost:/ root#
    A couple of things to note:
    1. I did have an external bootable drive, which does work properly when selected as the Startup Disk, but still registers when not plugged in the machine.
    2 File Vault is turned on. And let me tell you. If you ever use more than half your drive space, as most people do, you will have a humbling experience. File Vault is overkill. I am angry that Apple could not come up with a "fail-safe" for legitimate, password bearing rightful owners.
    I just want one chance to get in my home folder to get what I want (my music, photos, mail, passwords, widgets, etc.)

  • ASAP Single User Mode Problem

    Hello,
    When I try and enter single user mode I see scrolling words and then it pauses for about 5 seconds then some more scrolling then exits itself before I can type anything.
    On my other mac it stops scrolling and lets me type.
    Does anybody have any solutions?
    Removing Ram is not an option and I have cleared the PRAM

    If any peripherals are connected when you try to boot in single-user mode, disconnect them and try again. Otherwise do as follows.
    Back up all data.
    Boot into Recovery mode. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • Single user mode problems

    I made typing error in /etc/rc.local so the boot-up process hanged.
    So I went in to single mode by typing 'single" in the editor in grub.
    Everything worked fine, I booted up in single mode and changed the rc.local but now I can't go back normal, grub will boot up in single mode every time either I choose my regular och my fallback.
    What to do?
    //Gagge
    I checked the /boot/grub/menu.lst but seems normal.
    Last edited by gagge (2011-09-13 18:39:30)

    menu.lst:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    title Arch (main)
    root (hd0,0)
    kernel /vmlinuz-linux root/dev/disk/by-uuid/1463dc61-c52f-486d-8900-eec20a154c57 ro
    inittab:
    id:3:initdefault
    rc::sysinit:/etc/rc.sysinit
    rs:S1:wait:/etc/rc.single
    rm:2345:wait:/etc/rc.multi
    rh:06:wait:/sbin/sulogin -p
    c1:2345:respawn:/sbin/agetty -8 -s 38400 tty1 linux
    c2:2345:respawn:/sbin/agetty -8 -s 38400 tty2 linux
    c3:2345:respawn:/sbin/agetty -8 -s 38400 tty3 linux
    c4:2345:respawn:/sbin/agetty -8 -s 38400 tty4 linux
    c5:2345:respawn:/sbin/agetty -8 -s 38400 tty5 linux
    c6:2345:respawn:/sbin/agetty -8 -s 38400 tty6 linux
    ca::ctrlaltdel:/sbin/shutdown -t3 -r now
    x:5:respawn:/usr/nin/xdm -nodeamon

  • Can't start up in single user mode

    MacBook was shipped to me carelessly and now I can't get it to boot up. Tried just about everything, but wondering if there's any other way besides Apple + S to get it in Unix mode.

    Thought I should add that after a long wait, a grey folder with a question mark pops up. It's not flashing, just solid. And eventually that disappears and goes back to a white screen.

  • Powerbook won't start, got message i don't understand in single-user mode

    PowerBook G4 Mac OS X (10.3.9)
    About a week ago my powerbook (purchased in Dec '03, running 10.3.9) froze while I was using it. I had to manually shut it off, and then it would not restart (got stuck on grey screen with gear). I was able to start it up again once in Safe Mode, at which point I downloaded and ran Macaroni. Upon reboot, it wouldn't start up at all, staying on the grey screen for 15-20 minutes before I gave up. Now, I've tried starting it in Single-user mode. At the command I typed "fsck -fy" and the following message was returned:
    "Singleuser boot -- fsck not done
    Root device is mounted read-only
    If you want to make modifications to files,
    run ' /sbin/fsck -y' first and then '/sbin/mount -uw /'
    localhost:/ root# "
    Does anyone have any idea what this means?
    I am expecting the worse, I made a bootable back up in august, but was hoping to get it to start at least once more so i could update that back up or email myself some files. The only other possibly relevant info is that when it froze last week it started making really really loud repetitive noises (as if the hard drive was stuck?). For a while there I was also hearing an odd humming noise whenever i plugged in the AC adapter.
    Well, any help would be truly appreciated.
    thanks in advance..
    PowerBook G4   Mac OS X (10.3.9)  

    The two observations may be related. It is possible that the power adapter has developed a fray or short, and is giving insufficient power for the hard drive to operate properly. Do you have another Mac you can connect the machine to via Target Disk Mode after getting a replacement power adapter?
    I would also get a copy of Prosoft Data Rescue and an external hard drive that is Firewire at least as big as the internal hard drive. That will give you a chance to recover information if it is at all reachable.
    If the directory is damaged Alsoft Disk Warrior may be able to repair it, but I'd only run that after determining Prosoft Data Rescue is unable to rescue any usable data.
    I would not attempt to run any norton utilities on it, and if you have in the past don't do it again, as Disk Doctor and Speed Disk have been known to damage Mac OS X more than fix it.

  • Start SQL Server in single user mode with parameter -m doesn't work well

    C:\Windows\system32>net start mssqlserver /m "Microsoft SQL Server Management St
    udio - Query"
    The SQL Server (MSSQLSERVER) service is starting.
    The SQL Server (MSSQLSERVER) service was started successfully.
    C:\Windows\system32>sqlcmd -S . -e
    1> go
    1> select @@servername;
    2> go
    select @@servername;
    myserver
    (1 rows affected)
    1>
    As you can see, I'm still able to connect with sqlcmd prompt to SQL Server. According production doc of SQL Server 2014, it should not be conncting by sqlcmd. it shall only be connected by SSMS.
    below the original doc on msdn:
    Start SQL Server in Single-User Mode
    Provide Feedback
    Under certain circumstances, you may have to start an instance of SQL Server
    in single-user mode by using the startup option -m. For
    example, you may want to change server configuration options or recover a
    damaged master database or other system database. Both actions require starting
    an instance of SQL Server in single-user mode.
    Starting SQL Server in single-user mode enables any member of the computer's
    local Administrators group to connect to the instance of SQL Server as a member
    of the sysadmin fixed server role. For more information, see Connect to
    SQL Server When System Administrators Are Locked
    Out.
    When you start an instance of SQL Server in single-user mode, note the
    following:
    Only one user can connect to the server.
    The CHECKPOINT process is not executed. By default, it is executed
    automatically at startup.
    Note
    Stop the SQL Server Agent service before connecting to an instance of SQL
    Server in single-user mode; otherwise, the SQL Server Agent service uses the
    connection, thereby blocking it.
    When you start an instance of SQL Server in single-user mode, SQL Server
    Management Studio can connect to SQL Server. Object Explorer in Management
    Studio might fail because it requires more than one connection for some
    operations. To manage SQL Server in single-user mode, execute Transact-SQL
    statements by connecting only through the Query Editor in Management Studio, or
    use the
    sqlcmd utility.
    When you use the -m option with sqlcmd or
    Management Studio, you can limit the connections to a specified client
    application. For example, -m"sqlcmd" limits connections to a
    single connection and that connection must identify itself as the
    sqlcmd client program. Use this option when you are starting
    SQL Server in single-user mode and an unknown client application is taking the
    only available connection. To connect through the Query Editor in Management
    Studio, use -m"Microsoft SQL Server Management Studio - Query".
    Shawn

    Hi Shawn Xiao,
    For starting SQL Server instance in single user mode, we can add –m; parameter in SQL Server Configuration Manager, also we can run CMD with ‘Run as administrator’ and input the following statement.
    NET START MSSQLSERVER /m
    I do a test in SQL Server 2014 Express version, after starting SQL with Single User Mode, SQL Server will only accept one connection. If you connect to SQL Server with a user account, the following error will occur.
    Login failed for user ‘domain\username’. Reason: Server is in single user mode. Only one administrator can connect at this time.
    However, in your situation, you can connect to SQL Server and run T-SQL statement successfully, it can be due to connection with the administrator account in your sqlcmd.
    For more information, you can review the following article.
    http://zarez.net/?p=117
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • How do i repair my hard drive in single user mode when disk is full?

    Hi there Apple Community!
    I have an old Macbook Pro 17" with an upgraded 500GB harddrive and 4GB memory. I'm running Mac OSX Lion.
    Was hoping you could help me out.  THis is the situation:
    Long story short I spilt wine on my macbook and the screen went a bit blobby. Switched it off for a few days, removed the battery etc. etc. Opened it up cleaned out as much of the wine as possible, but unfortunately some of it came in behind the LCD, so now the screen has a nice red stain.  Obviously I'm not going to try to clean that out of the LCD. 
    My Macbook Pro still worked for a few days after that, but then my harddrive gave up.  I booted in the Recovery HD menu, verified the drive and I got the error "Keys out of order - This disk needs to be repaired, click Repair Disk." I attempted to repair the disk but got the error "Keys out of order - Disk Full Error - The volume could not be repaired".
    Unfortnately of this 500GB I only have about 7GB free on it, as I have a huge iPhoto and iTunes library. I did make a TIme Machine backup of my user directory, but not the system files.  I don't really want to do a clean install because:
    1) I'm paranoid that there's something I did not fully back up
    2) I don't want to have to download the whole Mac OSX Lion again. I should have made a USB bootable backup when I had the chance.  I don't have access to a broadband connection.
    What I feel are my viable options, are as follows:
    1) I did buy a replacement internal 500GB harddrive, so I can probably try to make an image of the hard drive to this new drive, but not sure how. I believe it's through the Disk Utility with the "New Image" option but not sure how to go from there.
    2) Start up in Single User Mode and delete some unnecessary files and re-attempt to run the fschk -fy utility again (I tried this earlier and got the same Disk Full Error).  - the problem with this is, I'm not familiar with the command line and have no clue how to delete files.  I don't know my way around Unix.
    3) I can also probably attempt to make a Ghost Image or Acronis Image of the failed drive to this new drive, but not sure if Norton Ghost or Acronis True Image will be able to read this HFS drive - I believe it's possible as it's a simple hard drive clone. 
    If you can guide me in the best option - probably there is a better solution than my proposed ones above, I appreciate any feedback and comments you might have!

    hi Baltwo,
    So I ended up copying my user folder to another harddrive. I managed to download the whole osx lion again, reinstalled, and recovered my home folder using this discussion:
    http://support.apple.com/kb/HT1428
    I have managed to get all my files back. My iTunes library works fine, but my iPhoto library when I open it, get the following error:
    iPhoto cannot be opened because of a problem.
    Here's the error log
    Process:         iPhoto [1540]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         8.1.2 (8.1.2)
    Build Info:      iPhotoProject-4240000~8
    Code Type:       X86 (Native)
    Parent Process:  launchd [209]
    Date/Time:       2012-09-19 19:56:45.528 +0200
    OS Version:      Mac OS X 10.7.4 (11E53)
    Report Version:  9
    Sleep/Wake UUID: 7948ABE2-5294-4F87-B6E3-777095A2F2EE
    Interval Since Last Report:          4780 sec
    Crashes Since Last Report:           9
    Per-App Crashes Since Last Report:   9
    Anonymous UUID:                      70117D38-03EA-4F9C-B810-50B743864B9E
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found
    I've done an Apple Software Update but it didn't find an update for iPhoto.
    One thing to note is, this library was originally created on iLife 08, upgraded to '09 and it stayed on that version. It hasn't een upgraded to iLife '11.  It worked fine on my previous install of OSX Lion.  How do I recover the library without upgrading to '11 ?

  • Can't enter Single-User Mode

    I just bought tiger for my 12 inch powerbook G4. am unable to complete installation due to an error with my 10.2. The problem is I dont have the start up disks anymore and can't enter single-use or verbose-mode to fix the problem.
    Any ideas on how to upgrade or enter single-use?
    Thanks
    Ben

    An Open Firmware password is one thing that would prevent you from changing the startup disk, booting from a CD or starting up in single user mode. You would see a lock and a dialog asking you to enter your password. So, it doesn't seem that this is your problem.
    If you have some file directory damage, you can use the Tiger install DVD to attempt to repair it. Put the DVD in the drive, restart and hold down on the "c" key (if you have one and then choose the language you want to use. At the next screen, do not continue to install but choose to open the Disk Utility from the Utilities menu. You can then use the Disk Utility to "repair disk" on your hard drive. The Tiger Disk Utility is pretty mature and can repair many problems.
    -Doug

  • How to connect to internet in single user mode

    I've got some startup problem and would like to connect to the internet in single user more for downloading patch. Can anyone help me? Thanks.

    To start up in single user mode press command-s during start up.

  • Single-user mode freeze

    I am trying fsck a mac mini.
    When I start up in single-user mode, the keyboard(Bluetooth and usb) do not work. I have to unplug the cpu.
    Does this mean it's broke?

    Leopard.

Maybe you are looking for

  • Blackberry wont connect to macbook

    i plug in my blackberry curve 8330 using the usb it says connecting but never connects i downloaded the black berry software and it says to get started just plug it in but it wont aknowledge the fact that its plugged in

  • Perl problem? Run postflight script

    Yesterday my USB mobile internet aircard wouldn't mount in OS X (10.5.6). I spent hours on the phone with the ISP's tech support, and they ultimately had me download and reinstall the software. When I attempted to install that software, it failed wit

  • What user exit should I use to...

    Hi everyone! I need to check if the due date or bline date of a posting to a GL line item is filled out, which user exit should I use? Btw, I cannot change FSG so it is not an option... Here is a list of FB01 user exits: Exit Name           Descripti

  • Item attributes not read by IPC

    Requirement: Pricing in Web Catalog based on Product Master Attributes. (condition records use fields from product master data. These condition record do not get calculated in the Product price displayed in the produdct catalog). What we have done so

  • Ignoring current month line chart

    Hie Guys, I have a line chart with "Month-Year" as the dimension object and 3 measure objects (variables). I created variables for the measure objects so that only non-zero values are displayed. i.e. Variable 1 =  Measure 1 Where (Measure 1 <>0)  and