Starting up Issues after updating UAD2 5.4.1

After updating to version 5.4.1 UAD2 i have noticed the computer takes something like 5 minutes until you can use the Dock, (when you start up the computer) the cursor of the mouse moves but aint nothing to click, you can also see your desktop and your wallpaper then after these 5 minutes it works normally... anyone else having this ?

hey , thanks i tried and it worked , but just with the free apps ..the others still do not wanna run
best regards tarek

Similar Messages

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

[SOLVED] Unable to start vmware 9 after update

Hello Folks,
I got one weird issue after update,
I tried to start vmware, failed as nothing happeded, no error message shown.
Do you have any clues ?
┌─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# uname -a
Linux tp 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64 GNU/Linux
┌─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# vmware
┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# vmware-modconfig --console --install-all
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/task.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-CEZuvv/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/driver.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/hub.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/netif.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/userif.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/bridge.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/filter.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/procfs.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/smac.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-CEZuvv/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/filesystem.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/file.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/stubs.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/block.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/module.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/control.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/super.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.o
/tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: initialization from incompatible pointer type [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: (near initialization for ‘RootInodeOps.lookup’) [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: initialization from incompatible pointer type [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: (near initialization for ‘LinkDentryOps.d_revalidate’) [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c: In function ‘DentryOpRevalidate’:
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: warning: passing argument 2 of ‘actualDentry->d_op->d_revalidate’ makes integer from pointer without a cast [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: note: expected ‘unsigned int’ but argument is of type ‘struct nameidata *’
LD [M] /tmp/modconfig-CEZuvv/vmblock-only/vmblock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmblock-only/vmblock.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/driverLog.o
LD [M] /tmp/modconfig-CEZuvv/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/af_vsock.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/vsockAddr.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/notifyQState.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/util.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/stats.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/notify.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/driverLog.o
LD [M] /tmp/modconfig-CEZuvv/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vsock-only/vsock.mod.o
LD [M] /tmp/modconfig-CEZuvv/vsock-only/vsock.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface done
VM communication interface socket family done
Blocking file system done
Virtual ethernet failed
VMware Authentication Daemon done
Unable to start services
┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# vmware
┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
└─#
Thanks in advance,
Liao
Last edited by liao (2013-01-11 14:10:29)

after check vmware message under /tmp/vmware-$USER/vmware*.log, found one package is missing - libpng12, after installed it, everything looks good again

Sync session failed to start in iTunes after updated to iOS 7

Sync session failed to start in iTunes after updated to iOS 7

Restart your computer
While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
After you are done doing that, restart your phone.
Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

Lock button issue after update

So I updated my iPhone 5 to the 7.0.2 update this past Sunday and now my lock botton is not responding when I press it. I have to hit it a few times to get it to respond now.
It is NOT a hardware issue since I did not have that issue since ownership. It only started with this issue after I did the update to the 7.0.2 software. 7.0 it was completely fine. (It was an OTA update from 7.0 to 7.0.2)
I have not done the, "erase settings and reset" yet so everything can be reinstalled. But I am wondering if anyone has come across this issue and found a solution without doing the factory reset.

Just quickly pointing out that you said "It is NOT a hardware issue", yet, you post this under "iPhone Hardware". Nice!
Check for any and all debrie that could cause such a thing to happen. Other than that, best bet is to backup via iTunes AND iCloud, then do a full restore via iTunes.
Good luck!

Issues after update to 10.2.1.2976

I updated my Z10 to 10.2.1.2976 and started having issues with the microphone during calls. I don't use voice dictation so I cannot say if it affects everything or just in calls. This is an intermittent issue where the mic just cuts out. It sometimes works but after a few minutes will cut out again. The top mic (speakerphone) works just fine.
The phone was working just fine up to the update, and my Q10 (still on the old version of 10.2.1) works great! I am afraid to update the Q10 because I need that phone to work as my business phone.
Any thoughts?

How about forgetting about the OS version you have (seeing as you're having issues) and jumping to an even newer version?
Have a look:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
I hope that opens up worlds of possibilities to you. Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Lion - TM issues after update

After updating to LION My timemachine started to give me huge issues.
i tried all possible solutions but my TM on Lion does not want create a backup. It has in a week backed up everything but it wont creata a usable sparsebundle . It keeps on ejecting the disk. After clearing the V100 index file seems going better but it still does not create a usable file. The repair disk did not show any issues . going pretty much insane.
I was able to use an external with USB without issues. But the NAS Synology DS207+ running their latest firmware on it that is supposed to work with Lion over LAN is creating the problem.
Tried wirelessy , same issue.
My Network has Airport express extreme. the macbook is connected though directly to the router via LAN while the NAS to Airport via LAN. this setup worked before on Snow leopard.
Couple of TMbuddy codes lines:
Starting standard backup
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Warning: Bytes to copy estimate was negative (-75305038)
100.0 MB required (including padding), 519.35 GB available
Waiting for index to be ready (101)
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “objects.xib” couldn’t be opened." UserInfo=0x7fbd3adbfa70 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcomeOffline.nib/ob j ects.xib, NSUnderlyingError=0x7fbd3c1245c0 "The operation couldn’t be completed. Input/output error"}
Stopping backup.
Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “keyedobjects.nib” couldn’t be opened." UserInfo=0x1096ddfa0 {NSURL=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSFilePath=/Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/6F08E59E-CE16-4DCD-8C2D-F44FB6040F6B/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iTunesDJSettings.nib/keye d objects.nib, NSUnderlyingError=0x1096c7fa0 "The operation couldn’t be completed. Input/output error"}
Backup failed because the network destination disk was ejected or disconnected unexpectedly!
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error: (-34) SrcErr:NO Copying /Applications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib/object s.xib to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/0D01FF21-79B2-4A6F-BBC8-58EAA4FF5ECD/Enrico/Ap plications/iTunes.app/Contents/Resources/German.lproj/iPodWelcome.nib
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copied 90669 files (34 KB) from volume Enrico.
Error wri
Starting standard backup
Network destination already mounted at: /Volumes/Macbook Backup Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb3df60 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb45670 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Disk image already attached: /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x10cb490e0 {MessageParameters=(
Ejected Time Machine network volume.
Giving up after 3 retries.
Backup failed with error: 31
Starting standard backup
Attempting to mount network destination URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
Mounted network destination at mountpoint: /Volumes/Macbook Backup Syn using URL: afp://admin@Enrico_Backup%20(Time%20Machine)._afpovertcp._tcp.local/Macbook%20B ackup%20Syn
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Macbook Backup Syn/Enrico Mac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Warning: Bytes to copy estimate was negative (-3853366630)
100.0 MB required (including padding), 496.41 GB available
Waiting for index to be ready (101)
Stopping backup.
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error: (-34) SrcErr:NO Copying /System/Library/Frameworks/Accelerate.framework/Accelerate to /Volumes/Time Machine Backups/Backups.backupdb/Enrico Mac/2011-09-02-135921.inProgress/E6213496-605C-48CB-AFB9-60C935297EEB/Enrico/Sy stem/Library/Frameworks/Accelerate.framework
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copied 86208 files (1003.7 MB) from volume Enrico.
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Copy stage failed with error:28
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Input/output error
Backup failed because the network destination disk was ejected or disconnected unexpectedly!
Backup failed with error: 26
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: -153; status: -35; dissenting pid: -1)
Error i get:
Time Machine couldn’t complete the backup due to a network problem.
Make sure your computer and the backup disk are on the same network, and that the backup disk is turned on. Then try again to back up.

I am sure that there are other users that have had problems since updating the iOS. Have you totally reset the iPad up as a new device - not from a backup - and you are still having the issues?
If you have done so, have you tried closing all apps? Then when you start using apps - if the iPad works OK up until you launch a certain app - it may be that particular app is cursing the issue. And BTW, have you updated all of your apps since you updated the iOS?
Closing all apps .....
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Since updating to 18.0 for mac, my scrollbar has been distorting when scrolling; started ~2 days after updating.

The odd thing is that it is an on and off issue, meaning that sometimes the scrollbar distorts when scrolling, and sometimes it doesn't, and it started doing this about 2 days after updating. It didn't start immediately, which I find kind of odd. Is this just a graphical glitch? I'm pretty sure it is. I'm using Snow Leopard 10.6.3.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Wi-fi issues after updating to iOS 6 (SOLVED!)

If you are having an issue over the wi-fi connection after updating to iOS 6, where the log-in to your wi-fi network fail and send you to an Apple web page, this is how I solved it:
Turn of your iPhone, not restart or restore, just turn it off, wait 10 seconds and turn on the iPhone again... Bingo! you'll will have wi-fi again.
No idea how to turn of the iPhone?
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
(article link)
It's important to do this and not hold the Sleep/Wake button until the device restart, because I did that first and that's what started the problem. Remember, SLIDE TO POWER OFF is the trick.
I think this is a Facetime related problem now that it works over your cellular network, but I'm not sure. Let's hope more info to come along or a fix from apple be issue.
Hope it help.
Best regards to everyone.

Here's what I did that I read in another thread that appears to have worked for the time being:
1. Go to settings-->Safari-->Clear Cookies and Data
2. You will get a pop that asks to you confirm that you would like to clear cookies and data, do it.
3. Restart your iPhone by holding the home button and on/off button UNTIL THE APPLE LOGO APPEARS ON THE SCREEN. Don't let go early.
4. If not connected to wifi, connect through settings menu.
Again, this fixed my problem but others are reporting that it did not work for them. Good luck and hopefully Apple will get a patch out ASAP.

Start up failure after update

My HP Pavilion 17-e073ed fails to start up after updating. (Windwos 8.1)
The failure id is OU6G62-6RN71F-MFPWWK-60S303
Automatic system recovery doesn't work and starting up in the safe mode isn't possible.
Can anybody help

Hi PECAKO,
Welcome to the HP Forums! I see that you are having some problems upgrading to Windows 8.1. The Automatic System Recovery was that trying to restore Windows 8 or trying to recover 8.1? How long have you had the Pavilion for?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Starting up Issues after updating UAD2 5.4.1

Similar Messages

Maybe you are looking for