"Starting user manager for UID 120" loop during startup

Hi guys,
Recently after not turning on my computer for a week and a half, I got this issue when I start up. Basically after I load into Arch Linux, that message loops for like 12 times before the computer gets stuck at a random part of the boot process. I think it is a hardware issue but I am unsure. Here's a pic of it below:
http://i.imgur.com/Qd1DgXP.jpg

Mike:
Welcome to Apple Discussions.
If you have a new installation and you do not have any data to preserve, the easiest thing is to go back, reformat and erase HDD, then reinstall software. If you have data on it that is not backed up the do an Archive and Install.
Please do post back with further questions or comments.
Cheers
cornelius

Similar Messages

Option key can't function to access start up manager, so i can't choose startup disk. please help me

option key can't function to access start up manager, so i can't choose startup disk. please help me

If you have Apple Care, call them and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

User Management for e-Commerce ERP

Hello Experts,
I am working on e-Commerce ECC6.0 version.
Had some questions in the area of user management:
A)
The scenario is that the e-commerce application needs to be integrated to Poral, now my doubt is which userType option is the best to be chosen for such cases.
Is it mandatory to use user type "ERP e-Commerce logon via UME"?
I have not worked with UME before and hence if you can also share some links / pointers in that area?
what other SSO logon options are available?
B) In case there is no portal and e-Commerce is working as standalone application:
There is already a ECC6.0 system in place where until now customers have been maintained. The client has been using a custom Online Store application on which login was via the customer id. Now they want to use e-Commerce for ERP, but still want the logon to be via the customer id only. In such case the only option that I can think of is via "R3_SU05Customer_LoginCustomerNo" userType. But since su05 type is not recommended now, I was wondering if there could be some other option as well? Can you guide..
Thanks

A
Is it mandatory to use user type "ERP e-Commerce logon via UME"?
UME makes the user management simple and central to the Security / System group.
have not worked with UME before and hence if you can also share some links / pointers in that area?
UME is not something any developer / functional analyst will do. We should leave that to the security group. If you insist, here is a starter [Help on UME.|http://help.sap.com/saphelp_nw04/helpdata/en/e5/618a3eacd49076e10000000a114084/frameset.htm]
B
See section 2.6 of this [E-Commerce with ERP Business Configuration Guide|https://websmp205.sap-ag.de/~sapdownload/011000358700002100812006E/Config_Guide_ECO_ERP_50.pdf]
There are some steps on migrating from SU05 to SU01. You can always have the current customer number as the alias for the internet user.
Easwar Ram
http://www.parxlns.com

Cannot start Enterprise Manager for Fusion Middleware 11g

Dear all,
Because I want to install Oracle EGRCM v8.0.1 in Linux x86_64, so I installed Oracle Weblogic 11gR1 and SOA Suite 11g first.
After installation successfully, I created a base_domain as default, and can start weblogic administration server ( http://localhost:7001/console ) successfully.
Now I want to use Enterprise Manager for Fusion Middleware 11g. Per "*Oracle® Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)*", the EM should be available now and the access URL should be http://localhost:7001/em . But when I try to access it, the following error returned:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
So I try to start with emctl in *$MW_HOME/oracle_common/bin/*, the error is as following:
+./emctl: line 387 /d02/Middleware/oracle_common/perl/bin/perl: No such file or directory+.
I check the path and find out that no directory named "perl" under */d02/Middleware/oracle_common*. So I try to copy the necessary dir from the dir installed Oracle Database 11g ( *$ORACLE_HOME* ), but it returns following error:
OC4J Configuration issue. /d02/Middleware/oracle_common/sysman/j2ee not found.
I try to copy necessary dir from *$ORACLE_HOME* but still cannot start EM.
Please give some advise about how I can start EM for Fusion Middleware 11g, any idea is appreciate!
Best Regards,
Kenny Wang

Ravi Jegga wrote:
Hi Kenny
See this post of mine: Re: Fusion Middleware Console
For any SOA Domain, unless you have Enterprise Manager Facet enabled (during domain creation process or adding later on by extending it), you will not be able to access the EM Console. For quick testing, open config.xml file for your domain and check the modules specially em module as shown below. It should be there. This is for one of my SOA Cluster Domains with SOA on top of WLS 10.3.2
<app-deployment>
<name>em</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>C:\beawls1032\user_projects\applications\soaDomainCluster1/em.ear</source-path>
<deployment-order>400</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
Thanks
Ravi JeggaHello Ravi:
I too like Kenny experienced the EXACT same thing this morning. I was trying to figure out how to modify the formsweb.cfg and I remembered from when I install Oracle9i/10g AS a few years back, that it was on the Enterprise Manager Console for forms (different than the EM for the database). Well that's different than the consoles for Weblogic Server and Weblogic Server for Forms. I ran into the same errors Kenny did, and I followed your steps except that I did install into the domain the Enterprise Manager so when I looked at the config.xml I do see the same code that you posted above. Yet I still get the error when accessing
http://computer:7001/em
Also when trying to run emctl (I copied the perl directory from the database) and same error as Kenny. Any tips/clues?
I'm running on Red Hat Enterprise Linux 5, Oracle 11g (database, Fusion Middleware).
Thanks,
Gio

User Management (for dummies?)

reposting from a different forum...
I'm trying to use User Management and my head hurts...
...I'm on 11.5.10.2 ATG RUP5 and I've tried to connect all the dots referencing the User Management Admin Guide. I'm trying to create a role that I could grant to an apps user, allowing the user to grant a subset of possible responsibilities to other users - essentially a delegated user admin, as I understand it. I get close, but I'm always off - either I can't limit the role to just the single 'Search/Edit Users' functions, or I can't get any menu functions to display, or something else. <cry>
In one place, the Admin Guide gives steps for defining user administration privileges for roles; in another place, it talks about role inheritance hierarchies; in another place, separating navigation menus and access control. Via the forms interface, I tried looking at the definition of the menu 'User Management: Top Level Menu' -- it seems to contain submenus that contain redundant submenus. Once again, a bit confusing to me. For example, what do I keep / delete when I only want a delegated user admin responsibility to have an HTML navigation with just 1 subtab for 'users'? Do I use this menu and prevent access to the other 'tabs' or functions by a security policy or do I need to build a new menu?
I'm thinking the seeded roles have all the components needed (functions, security policies, menu navigations, etc.) to demonstrate an integrated example -- but I haven't been able to put it all together.
Could someone help with a clear, simple, example?

Hello,
In one place, the Admin Guide gives steps for defining user administration >privileges for roles; in another place, it talks about role inheritance hierarchies; >in another place, separating navigation menus and access control.
Could someone help with a clear, simple, example? I am working on something relative maybe helpful in which it has decided to make delegate administrators (local administrators) the departmental heads but obviously training them might be a different story.
Normally not many new menus are used as there are many seeded menus that can be used instead atleast in my case it has been. Instead of creating new meuns trying altering the current ones.
Try to understand role inheritance hierarchies as follows there are two roles sales person and a sales manager (this is a simple example), sales manager being the higher role will have (all functions, security policies, menu navigations, etc) of the role sales person. Mangement of users can be much easier.
Normally using on exclusions of functions works for me. Please ask if there any confusions or doubts?
Adith

Portal user management for SRM

Hi ,
We will be using global portal & SRM as a backend.
Portal<---->SRM<----->ERP
Which will be the best option for data sources of the User Management Engine (UME)?
Regards,
Arpit.

Repeated.

User exit for Production order confirmation during goodsmovement

Hi Guru's
Am in need to find the user exit for Equipment master creation. Equipmentmaster will be created when the goods movement 101 happens. can someone help me out to find the user exits. thanks

Hi,
Ok thanks for that.For Co11n please find the user exits below.But i am not sure which will suit your requirment.Please let me know for any further help.
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default va
CONFPI02 Process order confirmation: Customer spec. input checks
CONFPI03 Process order conf.: Cust. spec. check after op. select
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when savi
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default val
CONFPM02 PM/SM order confirmation: Customer specific input check
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selectio
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when sav
CONFPP01 PP order conf.: Determine customer specific default val
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selectio
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when sav
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscree
CONFPS01 PS confirmation: Determine customer specific default va
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. sele
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when sa
Thanks,

Photoshop CC gives beach ball for a full minute during startup.

CC 2014 works fine on my iMac. However when trying to start key CC 2014 apps on my Macbook Pro Retina (current version of Mavericks), they hang during startup.
I uninstalled, ran CC cleaner tool, reinstalled, tried removing plugins, font files... I logged out of Creative Cloud and back in... I'm at wit's end, and have wasted way too much time trying to troubleshoot. Illustrator, InDesign load fine. Photoshop and Premiere Pro do not. Photoshop will eventually load, but after the interface shows up it will give me a beach ball for at least a minute or more.
I logged in as a Guest user and it started right up.
Has anyone else experienced this? Just wasted a night trying to get this too work.

I have the exact same issue... but haven't found a solution for it yet :-(

Flash Builder 4.5.1 for Mac hanging/crashing during startup "Loading Workbench"

Hello,
I'm having ongoing trouble with Flash Builder 4.5.1 hanging/crashing during startup.
Sometimes the following Terminal command fixes the issue:
cd ~/Documents/Adobe\ Flash\ Builder\ 4.5/cascaded/308971/configuration/.settings
rm org.eclipse.ui.ide.prefs
However this isn't a silver bullet solution, and sometimes the only way is to uninstall and reinstall FB4.5.
But this is a major hassle, especially after 3 or 4 times!
I am running Mac OS X 10.7 and have updated to FB 4.5.1 Premium and also installed Subversion/Subclipse as well as the BlackBerry PlayBook SDK.
Problems seem to occur when working in SVN projects.
I have also noticed that the Delete and Arrow keys and Right Click fails to work sometimes also.
Is there a way to reset / clear FB 4.5 Prefs / Workbench?
Thanks,
David Douglas
Here is the console report below:
/Applications/Adobe/Adobe\ Flash\ Builder\ 4.5/Adobe\ Flash\ Builder\ 4.5.app/Contents/MacOS/Adobe\ Flash\ Builder\ 4.5 ; exit;
!SESSION 2011-09-13 15:07:58.914 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_26
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86, WS=cocoa, NL=en_US
Framework arguments: -keyring /Users/david/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86 -keyring /Users/david/.eclipse_keyring -consoleLog -showlocation
!ENTRY org.eclipse.core.resources 2 10035 2011-09-13 15:08:02.101
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.ui 2 0 2011-09-13 15:08:02.905
!MESSAGE Warnings while parsing the commands from the 'org.eclipse.ui.commands' and 'org.eclipse.ui.actionDefinitions' extension points.
!SUBENTRY 1 org.eclipse.ui 2 0 2011-09-13 15:08:02.906
!MESSAGE Commands should really have a category: plug-in='com.qnx.flashbuilder.multiplatform.qnx.ui', id='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.OpenInfoCenter', categoryId='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.category.help'

Delete the Adobe Flash Builder 4.5 folder from your Documents (assuming you don't have anything valuable in there). That seemed to work for me, as I don't keep my projects in there but there were some temp files that were breaking it. You'll probably have to re-inport your projects.
Adobe, I'm getting very sick of your (expensive) products wasting my time.

Forgot Password setup in User Management for Oracle 11.5.10.2

Can someone tell me how to setup the Forgot Password feature in Oracle 11i. Currently users call on the phone to reset their passwords for them. Please advise.
Thanks
svnelson

Please refer to the following notes:
Note: 399766.1 - Reset Password Functionality FAQ
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=399766.1
Note: 390894.1 - 'Forgot Your Password' Feature Does Not Reset Password Automatically
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=390894.1

User management for the Identity Management User Interface

Hi everyone!
We have set up synchronization users from Identity Store in UME UI([Guides|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304280b4-25d0-2b10-b6a4-89c27409dea7?quicklink=index&overridelayout=true]).
When we assign the privilege priv: ume should be performed three tasks:
1. creating UME user
2. modify UME user
3. Add Password
But we see the fulfillment of only 1 and 2 tasks.
Why not fulfilled the task number 3?

Ivan,
In the workflow called "#Create UME user" from attached MCC files of the Guide,
Job "Add Password" will be executed only if the selected user does NOT have attribute MX_ENCRYPTED_PASSWORD set.
So, if the user on who you tried to provision UME privilege has already an MX_ENCRYPTED_PASSWORD defined correctly (DES3 encoded string), the job "Add Password" will not be executed.
To check this, get the MSKEY of the provision user and execute the following SQL query of the conditional task :
If you get a line in return, result is TRUE, else it's FALSE
SELECT COUNT(DISTINCT mskey) FROM MXIV_SENTRIES WHERE is_id=%$glb.SAP_MASTER_IDS_ID% AND
((mskey IN (SELECT mskey FROM MXIV_SENTRIES WHERE attrname='MX_ENCRYPTED_PASSWORD' AND searchvalue LIKE '%' AND mskey= <Enter the MSKEY of the provision USER>)))
Benjamin

How to Retrieve Server Name for creating connection pool during startup!

Hi All,
I am going thru the edocs documentation of weblogic for creating the connection pool and the datasource dynamically. The URL I referred to was as under
http://edocs.bea.com/wls/docs81/jdbc/programming.html
There is a sample given in the above-mentioned URL. The Server MBean is created by passing the server name.
The code below mentioned was have placed in my dblib.java
svrAdminMBean = (ServerMBean)adminMBeanHome.getAdminMBean("myserver", "Server");
I am creating the connection pool from the servlet by invoking the dblib.java
I cannot hard-code the server name in the dblib.java since the same code was shared across multiple servlets.
Each Servlet will create its own connection pool during application server startup.
Is there a way to retrieve the server name in which the dblib.java is invoked.
Any pointers to info source will be REALLY appreciated.
Many Thanks in Advance,
C R Baradwaj

You can get it from the Java system property weblogic.Name, i.e. System.getProperty("weblogic.Name");
Cheers
Feargal

My iPad updated to new version for an app and during startup I accidentally hitt iCloud I don't want that want to go back to my old sign in way how to reset and not lose downloads help please it won't let me reinserted with email instead

The question says it all I used to just sign in and I don't want cloud or to lose my apps just go back to email like before and I can't get it to let me go through questions again in setup now my mic to txt is gone and I am disabled I tried reset no data lost its different I want no cloud just back to before help me please how do I reset without loss and redo questions of how to sign in . Sorry no mic so hard to type. I want out of cloud hit it by mistake don't want to lose all though I messed up enough the search isn't same google just restart without wiping but it never lets me switch out of cloud and back to first way that's all I want no iCloud keep apps and then fix how it was set before
Step by step please I try sleep dnc home but to sign in it goes to cloud won't let me redo startup questions all because of update help

You can change the email address you use as your apple ID. this doesn't mean you have to delete the old email address as email.
When you delete an email from your device, it is only removed from the device, it does not delete your emails or the email account.

All Studio 2 applications prompt for serial every time during startup

I had FCP 5.1 and some other tools installed on this machine before, than when my long awaited Studio 2 arrived, and i installed it, since than every application is prompting me to enter my registration info: Name, Last Name and Serial #.
What is wrong with this? Did anyone have this issue before?
I know it has something to do with previous installations.
Please help...

Welcome to the boards
This thread may help
http://discussions.apple.com/thread.jspa?messageID=4553535&#4553535
Seems the best move is totally remove prior installations

"Starting user manager for UID 120" loop during startup

Similar Messages

Maybe you are looking for