Starting Virtual Machine will not start from hibernate mode.

Hi. I had a BSOD and upon rebooting my machine one of my virtual machines is stuck in "hibernate" mode and will not boot up.
I attempted to restore to previous versions of the vmc, but that did not work.
The error i receive is.
"Could not enable integration functions"
Retry or Continue.
Selecting "Continue" states "the operation failed. The virtual machine is not running"
Does anyone have any idea how to get a VPC up and running from this situation?
Thanks, Tim

Hi Dear Bob Comer,
My Laptop Windows 7 Suddenly "Shutdown". When I start it, it goes in recovery, after more than 5 hours I will Forcefully restart from Button, and start Windows 7.
Problem-1: Butt all environments OK butt very slow on any action, click on my computer or opening of any application very slow.
Problem 2: When I Click on Windows Virtual PC after long time I have same problem like "Could not enable integration
functions", Message displayed "Retry" or "Continue" after clicking "Continue" Message Displayed
"Could not enable integration functions". I have Data in MS Virtual PC Drive "C" and "D".
I read your Solution: I'm trying following steps:-
1- Going to Setting of Windows Virtual PC and Unchecked "enable integration features at start up" and Close Status
"Shut down" from "hibernate" Then
Press OK.
2- Remove the file (.vsv) from is
in "C:\Users\[userid]\AppData\Local\Microsoft\Windows Virtual PC".
3- Restart the Laptop and which is very slow, Butt When on Click to OPEN Windows Virtual PC Which is also very slow Black Screen coming with Windows XP Starting Logo. After long time Message Displayed "A disk read error occurred" Press Ctrl+Alt+Del to restart.
Start up Logo of Windows XP "Press Normally" again after 28sec in loop.
Dear What I can Do for: 1- retreating Data from Windows Virtual PC Drives "C" and "D" ????
2- How can my Virtual Machine Working OK and Fine ? Open
Please Solve my Problem with Thanks
Best Regards and Wishes
Khamkha

Similar Messages

Blade server is start but virtual machine is not started

i have a oracle virtual machine on blade server if any outage or planned activity is done the blade server is started automatically but virtual machines is not started
manually start the virtual machines any suggestions kindly share me.

Hi user,
As long as youhave access to the linux sever from your windows server, you're good to go. Open your admin tool, go to File --> Open --> Offline.
The Open window pops up. On the "File Name" field, enter the path of rpd file in the linux server (Ex: \\Server_Name\local\MyRpd.rpd). Select the file, and voilà!
I hope this helps.
J.

IMac will not boot from any mode except Target Disk

I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
         com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
         com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
com.apple.driver.AppleHDA          2.3.0f2
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AirPortBrcm43224          600.36.17
com.apple.iokit.AppleYukon2          3.2.3b1
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBUHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

IPhone 1.1.4 will not wake from sleep mode

Hi all,
I have an iPhone with 1.1.4 firmware. The problem that I have is that the phone will not wake from sleep mode by pressing the "home" button. I have to press both the "home" and "sleep/power" buttons and hold them for 6 seconds for the phone to restart. I did restore the phone twice - did not solve the problem. Then, one day, I left it charging for about 3 days and when I came back it started working fine. Not for long though( After about a week of normal usage the wake up problem came back. I don't know what to do. I don't think it's the software problem, since I did complete restoration 2 times.
If the phone is connected to a charger or computer - it wakes up fine.
Thanks, Gene K
Message was edited by: rimini

rimini,
When you've restored the iPhone, have you tried setting it up as a new phone? This would truly eliminate software as a possibility.
If setting it up as a new phone doesn't correct the issue, it's probably time for service: apple.com/support/iphone/service/faq/
Hope this helps,
Raleigh

MacBook pro 17" will not wake from sleep mode

Ok so my MacBook Pro 17" with osx 10.6.8 will not awaken from sleep mode. when attempting to wake it up the screen dosent come on and the mouse and keyboard do not receve any power. to get back on the computer i have to force a hard restart by holding the power button for 10 seconds then pressing it again. then it boots to where i left off when i closed the lid. i have read a few forums about this problem and i have went through all the steps of reseting various things and went as far as going into terminal using sudo to disable safe sleep and nothing helps. i noticed an unusual error in my console. here is a copy of my console log. the one in question is {7/14/13 4:52:43 AM com.apple.UserEventAgent-Aqua[118] dontAutoLoad = EMPTY!} someone please help me I am over 150 miles from the nearest apple store or authorised retailer

Active Profiles:
Battery Power                    -1*
AC Power                    -1
Currently in use:
halfdim          1
sms                    1
hibernatefile          /var/vm/sleepimage
gpuswitch          2
disksleep          10
sleep                    0 (imposed by 223)
hibernatemode          3
ttyskeepawake          1
displaysleep          5
acwake                    0
lidwake          1
Also I broke down and called support again this time a senior advisor's boss recorded the events and sent the data to their "engineering department" still waiting on the results hopefully they will get back to me sometime between today and saturday. will post the results of the tests. also this is a 2011 17in intel i5

Machine will not Start

Do I need a new computer and is all my data lost? I have HP Pavilion D4100Y running XP-pro with the latest service packs. It also has a dual RAID 0 hard drive setup. A week ago when I went to boot it up Windows would not start. The machine would go through its boot screen, windows would begin to start and then it would go back to its boot screen. It just keep looking if I let it. the machine would not start in Safe Mode or any of its variations. I did some repeated memory test using Memtest version 4 and was getting some intermittent errors so I bought new memory. That was not the problem but I am not getting any intermittent errors any more. When I try to go into recovery mode (hitting F10) during boot up I get a blue screen lock up that gives a Stop 0x00000024 error and says NTFS.SYS address F6F1B857. I have not checked to see if the address keeps changing. The error also says “Disable or uninstall any antivirus, disk defrag or backup utilities. Check your drive configuration and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption and restart.” This is all good advice if you can get your machine to run but when it won’t start this is all useless.
Needless to say I have a few questions. Where should I be looking and how can I fix the problem? Assuming it is some kind of corruption or failure of the hard drive(s) how can I get the data off the hard drives? I thought about just trying to let windows do a reformat and re-install but I am concerned about losing all the data on the drives. I took one of the drives out thinking I could make it a slave and plug it into another machine but the cabling on these drives is different than what I have see in the past. I know AI can not be the only one who has ever had this problem. HELP....

4 a rounended shape load bar appears under the cog nothing seems to load it them disappears and the cog keeps going
That is an indication that your Hard Drive has directory damage. It will attempt a repair and then proceed. It would be prudent to use your Installer/Utilities DVD to explicitly Repair the Boot Drive:
Boot to the Installer/Utilities DVD, but do not Install.
Answer only the "what language" question and wait a quarter minute for the MenuBar to be drawn.
Choose Disk Utility off the Utilities Menu
Select your Boot drive by Hardware_name. Check the lower right of the pane for SMART Status = Verified.
( Repair Disk ) This takes several minutes. If any issues, run again until clean, or hopelessly stuck.
Report any error messages, word-for-word, back here.

Time machine will not start

Hello.
I have this problem:
I can not start the Time Machine program.
When I click the icon I get the message <<You did not select a backup location for Time Machine. To select a backup location, set up Time Machine.>>. When I go to click on set up time machine, nothing happens. the program will not start.
How do I fix it?
thanks

sorry to hear about your problems.
i don't know what to suggest but can offer these user tips:
http://web.me.com/pondini/Time_Machine/FAQ.html
http://web.me.com/pondini/Time_Machine/Troubleshooting.html
hopefully something in there will help.
good luck !
JGG

My new Officejet Pro 8500a on a Windows XP machine will not print from the Internet.

I just purchased and installed an Officejet Pro 8500a all-in-one and everything seems to work fine except that the maachine will not print from the internet. I use Windows XP home and and the Firefox browser. The printer is connected directly to the computer, and is not directly connected to the Internet or any other network.

The Officejet 8500 printers take individual ink cartridges (IIC); that machine requires that all cartridges be installed to ensure that the printhead does not get damaged. Ink is used in the printer not just for printing, but maintain the printer and the printhead. One can reduce the amount of color ink the printer uses by changing the printer settings to Grayscale or use black ink only. Page 34 of the user manual shows how one can change those settings when printing documents. For further information on how ink is used in the printer; one can look as this page here where it goes into detail on the different ways that ink is used in the printer.
I would just replace the color cartridge that the printer indicates needs replacing when the machine alerts you to low ink. I would not replace all colors at once when only one is in need of replacing.
I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Will not wake from sleep mode

When I close then open the lid on my MacBook, it will not wake up from sleep mode. I have to reboot by holding down the power button for 10 sec. When it restarts, it takes a long time to get past the gray screen with the apple logo. I also have this same problem when it goes into sleep mode, when left idle. I have since changed the settings so it will not go into sleep mode when idle in system preferences. I have reset PRAM and SMC, but the problem still persists.

I have the same problem, intermittently. I think it has something to do with full-screen mode, which I use intermittently. Have you noticed this happening only when you are in a full-screen app?
I also have a MacBook Pro from 2011, and I know for sure my MagSafe power adapter is fine and not part of the problem.
I have noticed a few things that may be hints at what is happening:
one time, (all??) while my screen was basking in the glow of sunlight from the side, I saw that the screen pixels were indeed "on", that the back-light of the screen was just off.
Which led me to the conclusion that my MacBook Pro was indeed waking from sleep, the screen was just not lighting up.
But that theory was disproved this morning, when when waking from sleep, the screen was black, except for my cursor. My cursor was completely visible on a black background. Huh?? It was like some software was putting up a black modal dialog over the whole screen. Also, the Apple Logo on the back of the laptop screen was fully lit -- meaning the backlight was on. The machine was awake (curson moving on a black background), and the screen was fully back-lit.
I'm not sure yet how consistent this behavior is... I will take more careful notes each time this problem happens in the future... But, it looks like I have rogue software that is trying to make my machine look like it is sleeping.
To "capture" the culprit I think I could set up a hot-key command that takes a snapshot of all running processes in Activity Monitor. This could show what processes are running when "waking" from sleep. nabbing the culprit?
I use Snapz Pro. That is non-standard software running with control over screen functions. Maybe Snapz Pro has a problem? I doubt it, but maybe, because it has hooks into background tasks with video. Snapz Pro is my only 32-bit process. Could Snapz Pro be the cause? I use Snapz Pro all the time.
The problem seems to be related to Full-Screen mode. Could it be possible that full-screen apps sometimes have problems returning from sleep? I know there are viewControllers responsible for handling events when waking. Could the symptoms of not waking from sleep be caused by bugs in full-screen apps?

Hyper-V virtual machines may not start, and receive the error: Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on

I have used the Article ID: 2249906 to try and resove this error. It only started since I have created a dediacted SQL 2008 Server on the network. This is my attempt, so far using icacls:
icacls "C:\Users\Public\Documents\Hyper-V\Virtual hard disks\XYZ-SQL.vhd" /grant "NT VIRTUAL MACHINE
\13101CB0-271Z-4434-9736-E1DE331D316BZ":F
NT VIRTUAL MACHINE\13101CB0-271Z-4434-9736-E1DE331D316BZ: No mapping between account names and security
IDs was done.Successfully processed 0 files; Failed processing 1 files
Any ideas as this is becoming very disruptive to the network as the VM is a DC.
Many Thanks
Paul.B

From your description it sounds as if you have two VMs trying to use the exact same virtual disk. And this is not possible without using differencing disks in between. (it will give the error you describe when trying to power on the second).
Beyond that, I would have expected the configuraiton change to work. Another possibility is simply creating a new VM using the existing virutal disk. This is non-descructive as well and absolutely re-creates all of the VM objects and generates
new security identifiers.
If that does not work, then there is more to this puzzle than has been mentioned here and you will need to provide greater detail.
Brian Ehlert (hopefully you have found this useful) http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Satellite P100 will not stay in hibernate mode

Hi everyone~
Satellite P100
Vista
Before going to bed I always put my computer in hibernate mode. It won't stay in hibernate mode. I'm not talking about sleep mode here.
I click the start button then choose hibernate. It goes into hibernate and I go to bed so I don't know when it goes out of hibernate mode.
I used to have to press the power button to get it up and running after it went into hibernate. Along the front of the computer are 5 blue lights. I will call them a,b,c,d, and e.
d&e are generally off when I'm using the computer.
a, b, and c are lit up when I'm on the computer. When it goes into hibernate mode b goes out.
When I get up in the morning a,b and c are all back on and all I have to do is move my mouse around then log on instead of first pressing the power button.
I have some scheduled tasks but I've always had those.
Please help. Is there a setting I can do to take care of this issue? TIA

You can create an on task!!!
- go to Start > Control Panel > System and Maintenance > Administrative Tools > Task Scheduler- In the far right pane, click Create Basic Task.
- In the Create Basic Task Wizard, type the name of your task then click Next.
- schedule based on the calendar, click Daily, Weekly, Monthly, or One time and click Next.
- Leave Start a program selected and click Next.
- For Program/script, use this path C:\Windows\System32\Wuapp.exe (but you path could be different).
- Click Next and then click Finish.
For details you coudl also check this MS page:
[Schedule a task - How to|http://207.46.197.98/Windows/en-US/Help/d2a0a504-6a29-4358-b04b-d4bd1abf36c51033.mspx]
_But if you want to change ONLY the Windows update then go here:_
- Control Panel -> Windows Update
- On the left click Change settings
- There you can set the date and time when the update should be installed
Regards

HT201406 My iPod touch is locked up. It will not restore from update mode. After holding the on/off button down the slide to powerer off does not appear.

My iPod is loched up. I downloaded a new update and now it will not restore.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My Time Machine will not start up.

It is a model A1254. The light will come on and then go out with no start. Then when I plug it in again there is no light and again nothing. Maybe it's burnt up inside? It there a fuse I can replace? If the drive inside is OK can I take it out and use it in an enclosure?

They are absolutely classic symptoms of dead power supply.. there is no fuse.. the capacitors in the power supply are dead.. dead dead dead..
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/apple-time-capsule-repair-type2
Or just do a google search.. dead time capsule.. the wonder is.. you have lasted near to or more than 5years.
Yes, you can remove the drive and use it in a holder.
http://www.ifixit.com/Device/Apple_Time_Capsule
Do not forget that drive is 5years old.. recovery of files great.. but be very cautious to trust an old supply.. although I do have to say the 1TB hitachi are excellent.

A disk in the DVD drive causes a crash, machine will not start

I have a fairly bizarre problem, searched, didn't find it in here so... maybe I am special. Anyway. I have a 2.4ghz MBP with 4GB of memory. I got it in November (with Leopard). It has worked without an issue until I started tonight to give bootcamp a go on it.
Symptoms:
- Leopard boots up fine, logged in, nothing else open
- Insert any disk (DVD, CD-R)
- Leopard crashes
- continues to cycle through a restart but it keeps crashing waits 1 min, restarts, repeat
- Even tried a Leopard disk
Tried:
- disk utility to look at things
- can't load anything to check the hardware cause its cd based
What I did before it started going nuts?
I used bootcamp to partition the drive. This worked fine. Stuck the XP disk in and it read it fine. Machine rebooted to install XP, this was fine. Things went well until the XP install asked for a reboot. Then it restarts, disk failure. I eject disk and select OS X. Off we go, things are good.
I delete partition thinking something got screwed up. Tried again. This time when I put the XP disk in the thing crashes while in Leopard.
While I have typed this my machine has restarted a dozen times on its own. It is kinda funny to watch but *** has happened to it? I can't even re-install Leopard... no drive.
The DVD drive does spin up but after a few seconds it crashes. Any ideas out there?

Maybe related...
Bought a 2.6G MBP yesterday, brought it home, booted up, everything great until I started loading my apps---CDs/DVDs would spin and spin, then eject---then Install Disc 1 froze the system. Can't eject the disc---onboard fans racing like jet engines and the keyboard area near the screen seemed very hot. Posted last night---someone thinks either bad optical drive or motherboard. About to go see a Genius now. For $3K+, this pretty much *****.

Time Machine will not start (code -43)

After getting a new 1TB external usb drive and changing format for use with time machine the program no longer launches producing unexpected error (code -43) instead. I had hoped to have three of four partitions on this drive for use with old windows machines as well as my mac. There are quite a few code 43's reported here with no definitive answer as to what it means. As i want to use the external drive as storage and not just backup will time machine be happy sharing the drive (if it ever works). Can I have one partition for time machine and others for various uses on the same drive.
After seeing the quantity of posts here I am a little worried about using TM, but I have also read reports of it's greatness and even a major reason to upgrade to Leopard. Any help would be much appreciated.

Can't help with the TM stuff, but the error is:
fnfErr = -43, /*File not found*/
As to which file, I haven't a clue. However, TM help does have this:
+You can use Time Machine with FireWire disks, USB disks, and Time Capsule. The disk used for backing up must be in *Mac OS Extended (Journaled) format, and must have Access Control Lists (ACLs) enabled*.+
This appears to preclude using it with windoze boxes; i.e., formated as FAT-32 or NTFS,

Starting Virtual Machine will not start from hibernate mode.

Similar Messages

Maybe you are looking for