Starting Web Application Designer

Is it possible to start the BEX Web Application Designer from GUI?  I know you can start BEx Query Designer by running RRMX.  Is there a similar command in BW GUI that also starts the Web Application Designer?
Thanks.

Hi,
There is a no tx code to open WAD.
You have open via srart ->Bex Explorer->Web application Designer.
Thanks,
Michael

Similar Messages

  • How to create a date range in Web Application Designer

    I am using 3.1 version of Web App Designer.  I need to create a report with date ranges.  I can get one date to work but not two (I need a start date and end Date).  My Query has 0CALMONTH with a variable for Interval.  When I select it as a dropdown (??) in Web App Designer, I only get one date prompt in web app designer.
    Any suggestions??
    Thanks
    Kristen

    Hi Kristen,
    I'm sorry i'm not coming to solve your problem,but for the trouble I have had,and I want to create a date picker in Web Application Designer,so if you have solved the problem ,please email to me? [email protected] ,thx very much!
    best regards
    zegion chan

  • Unable to open WAD (web application designer) in BW 3.5!

    Hi,
    when i open WAD through menu path (start->programs       
    ->Business explorer->Web application designer), i am getting the following error!
    WADConst
    Please log on to a Netweaver BI 7.x system. System J2E does not have the minimum version required 70005.
    I just can`t understand from where i got this BI 7.x system, when my system is BW 3.5 (NW04 platform).
    can any one expalin me what is this problem? and suggest me to over come this problem?
    Thanks,
    Ravi

    Hi Ravi!
    I assume that you installed the SAP GUI 6.40 with BI Addin (which contains the BI Frontend for SAP NetWeaver 2004s BI).
    In this case, you have a sub folder underneath "Business Explorer" in your startmenu named "Business Explorer (SAP BW 3.x)".
    You have to use this version of the BEx Web Application Designer.
    If this is not the case, please create a Support Message with all detailed information (backend and frontend versions).
    Thank you,
       Tobias

  • Unable to open WAD (Web Application Designer) SAP BW 3.x

    Hi experts
    In my computer I don´t open WAD (SAP BW 3.x)
    i make click start-> programs -> Business Explorer-> Business Explorer(SAP BW 3.x)-> Web Application Designer(SAP BW 3.x)
    appears following error:
    This application requires Internet Explorer 5 or higher
    but I have installed the Internet Explorer 8 version
    then I do not understand because can´t run the WAD 3.x
    Can anyone help me? please
    Thanks

    Hi ashutosh
    the following information of SAP GUI:
    Component: SAPLogon for Windows
    Release: Final Release 720
    Fichero: saplogon.exe
    vers.Fichero: 7100.4.17.1045
    Build: 1147943
    Patch Level: 17
    whether if it is which version of WAD but I am interested in running and to open the Web Application Designer in any of the versions: 3.x or 7.0, but the important is that can be work with some WAD model     because in version Web Application Designer 7.0 is enable pero when i search some WAD model (I know that it exists in the system) The system search says it  does not exist or no found. 
    I can't try uninstalling because I'm not a support person so I have not authorization, I'm a consultant and only want to work with  WAD models

  • Unable to open WAD (Web Application Designer) 3.x

    Hi experts
    In my computer I don´t open WAD (SAP BW 3.x)
    i make click start-> programs -> Business Explorer-> Business Explorer(SAP BW 3.x)-> Web Application Designer(SAP BW 3.x)
    appears following error:
    This application requires Internet Explorer 5 or higher
    but I have installed the Internet Explorer 8 version
    then I do not understand because can´t run the WAD 3.x
    Can anyone help me? please
    Thanks

    HI,
    Please run the installation check as per note 1229206 and attach the result to the message.This is typically a front end installation issue May be dhtmled.ocx is not registered on this PC This is a typical front end issue where you have to look at your GUI patch and front end patch.I recommend you deinstalling your frontend installation as follows:
    - Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -
       'REMOVE SAP FRONTEND'
    - Install the newest frontend and GUI patch and check the installation
       again with sapbexc.xla
    Please run the front-end checktool SAPBEXC.XLA as per Note 197460 and
    ensure there are no errors.
    Please refer to following Notes for GUI patch and front end patch:
    578944     Expected release dates for SAP GUI for Windows
    558994     General information on BW front-end patches
    535308     How to apply a SAP Front End patch?
    96885      Downloading frontend patches
    You can download the latest patches from the following url,
    Goto URL: http://www.service.sap.com/swdc
    SAP Software Distribution Center -> Download -> Support Packages and
    Patches -> Browse our Download Catalog -> SAP Frontend Components ->
    SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.20 CORE -> win32 ->
    patch 9.
    Also you can download the latest BI addon and BW addon from the
    following url,
    Please goto
    -> service.sap.com/patches
    -> entry by application group
    -> SAP Frontend Components
    For BI add-on,                          For BW add-on,
         -> BI ADDON FOR SAP GUI 7.20       -> BI ADDON FOR SAP GUI 7.20
         -> BI 7.0 ADDON FOR SAP GUI 7.20   -> BW 3.5 addon for GUI 7.20
         -> BI 7.0 ADDON FOR SAP GUI 7.20   -> BW 3.5 addon for GUI 7.20
         -> Win32                           -> Win32
         -> Apply the latest frontend       -> Apply the latest frontend
            patch 500                         patch 8
    Please install the GUI and Business Explorer patches in this sequence:
    1. SAP GUI
    2. BI 7.0 ADDON FOR SAP GUI 7.20
    3. BW 3.5 add for GUI 7.20
    https://service.sap.com/swdc
      Installations and Upgrades
        Browse our Download Catalog
          SAP Frontend Components
             SAP GUI FOR WINDOWS
                SAP GUI FOR WINDOWS 7.20 CORE
                  Installation
           50105790_4 NW 7.0 Presentation - 7.20 Compilation 3 Present.1/2
    Regards,
    Naveen.

  • Bex Web Application Designer issue: portal communication error

    hi experts,
    I am working with Bex Web Application Designer in BI7. we are using SP9. When i try to use the Web template its giving below error.
    The Requested operation could not be performed due to portal communication error.
    its message class is RSBOPLAP and message number is 018 and description is Java System error: An unknown error occured During portal communication.
    when i double click the below error details given.
    Diagnosis
    An error occurred in the BI components on the SAP J2EE Engine.
    System Response
    Procedure
    Contact your system administrator to have the error analyzed in detail.
    Procedure for System Administration
    Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
    The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
    If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
    please give solutions to resolve the issue.
    regards
    vadlamudi

    hi shambhu,
    thanks for the reply, yes its related to basis but they are unable to trace it out. is SP9 support Bex Report Designer and Bex WAD??
    regards
    vadlamudi

  • Web application Designer - RFC Exception

    Hy guru, i have a serious problem: when open or execute a web templat on web application designer 7.0 i receive a error type RFC Exception.
    Could you hlep me? Thank's a lot.
    This is the content of bex_trace file:
    -EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
    Exception Message: Check: RFC Exception
    Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
       at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
       at com.sap.bi.et.BExOpenSaveServices.OSDialog.GetHistory(BExObjectType pObjType, BExMessages& peMessages)
       at com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList()
    Full Stack:
         at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
         at com.sap.bi.et.wad.Trace.Exception(Exception, String)
         at com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList()
         at com.sap.bi.et.wad.man.WADTemplateController.GetHistoryForDisplay()
         at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.renderHistory()
         at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.Refresh()
         at com.sap.bi.et.wad.man.WADfrmMainWindow.RefreshInitialTemplateList()
         at com.sap.bi.et.wad.man.WADTemplateController.OnTemplateOpened(WebTemplate)
         at com.sap.bi.et.wad.pageobjects.TemplateOpenedEventHandler.Invoke(WebTemplate)
         at com.sap.bi.et.wad.pageobjects.WebTemplateFactory.AddTemplateOrLibrary(WebTemplate)
         at com.sap.bi.et.wad.pageobjects.WebTemplateFactory.RegisterTemplateOrLibrary(IWebTemplate)
         at com.sap.bi.et.wad.man.WADTemplateController.LoadTemplate(EnumLoadMode, String, String, Boolean, String, Boolean, Boolean)
         at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
         at com.sap.bi.et.wad.man.WADfrmMainWindow.Menu_OpenSelectOH(BExOpenHistoryEventArgs)
         at com.sap.bi.et.common.BExOH.BExOpenHistory.RaiseSelectOpenEntry(dtaBExOHRow)
         at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.StartTemplate(dtaBExOHRow)
         at com.sap.bi.et.wad.man.WADfrmMDIInitialSelection.lblLinkName_LinkClicked(Object, EventArgs)
         at System.Windows.Forms.Control.OnClick(EventArgs)
         at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
         at System.Windows.Forms.Control.WndProc(Message&)
         at System.Windows.Forms.Label.WndProc(Message&)
         at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
         at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
         at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
         at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
         at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
         at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
         at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
         at System.Windows.Forms.Application.Run(Form)
         at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
    -EXCEPTION-END----
    END com.sap.bi.et.wad.WADBackend.WADOSDialogues.GetHistoryTemplateList ##########
    --> com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer ##########
    -EXCEPTION-START- : DEBUG ### JSP-Conversion:  ---
    Exception Message: RFC_ERROR_SYSTEM_FAILURE
    Exception    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.Rfc.RfcClient.RfcInvoke(SAPClient proxy, String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at com.sap.bi.et.Communication.RSWAD.BExGeneratedRSWAD.RSWAD_WEBPUB_CALL_SERVICE(String I_ACTION, String I_CONTEXTDESCRIPTION, String I_CONTEXTFRAGMENT, String I_NODEFRAGMENT, String I_TEMPLATE, String I_TMPLID, String& E_MAX_MESSAGE_TYPE, String& E_MESSAGES, String& E_RESULT, Int32& E_SUBRC, BICS_PROV_T_MESSAGE& E_T_MESSAGE)
       at com.sap.bi.et.Communication.RSWADrfc.RSWAD_WEBPUB_CALL_SERVICE(String& I_ACTION, String& I_CONTEXTDESCRIPTION, String& I_CONTEXTFRAGMENT, String& I_NODEFRAGMENT, String& I_TEMPLATE, String& I_TMPLID, String& E_MAX_MESSAGE_TYPE, String& E_MESSAGES, String& E_RESULT, Int32& E_SUBRC, BICS_PROV_T_MESSAGE& E_T_MESSAGE)
       at com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer(WebTemplate iTemplate)
    Full Stack:
         at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
         at com.sap.bi.et.wad.Debug.Exception(String, Exception)
         at com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer(WebTemplate)
         at com.sap.bi.et.wad.man.WADTemplateManipulator.ValidateTemplate(WebTemplate)
         at com.sap.bi.et.wad.man.WADfrmMainWindow.itmValidateOnTheServer_Click(Object, EventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
         at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.NotifyItem(BarItem)
         at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.HidePopup(PopupCloseType)
         at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.ProcessItemClick(BarItem)
         at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.OnMouseUp(MouseEventArgs)
         at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
         at System.Windows.Forms.Control.WndProc(Message&)
         at Syncfusion.Windows.Forms.ScrollControl.WmMouseUp(Message&)
         at Syncfusion.Windows.Forms.ScrollControl.WndProc(Message&)
         at Syncfusion.Windows.Forms.Grid.GridControlBase.WndProc(Message&)
         at Syncfusion.Windows.Forms.Tools.XPMenus.MenuGrid.WndProc(Message&)
         at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
         at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
         at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
         at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
         at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
         at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
         at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
         at System.Windows.Forms.Application.Run(Form)
         at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
    -EXCEPTION-END----
    : DEBUG ### False - RSWAD_WEBPUB_CALL_SERVICE:V:Validate on Server returned e_subrc=99
    END com.sap.bi.et.wad.WADBackend.WADBackendTemplateServices.ValidateTemplateOnServer ##########
    --> com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject ##########
    -EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
    Exception Message: Check: RFC Exception
    Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
       at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
       at com.sap.bi.et.BExOpenSaveServices.OSDialog.OpenObject(BExObjectType pServiceObjType, BExObjectType[] pSelectableSubObjTypes, Form pParentForm, String pDlgTitle, BExMessages& peMessages)
       at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form parent, String iType)
    Full Stack:
         at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
         at com.sap.bi.et.wad.Trace.Exception(Exception, String)
         at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form, String)
         at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenSimpleObject(BExObjectType, String&, String&, Form)
         at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
         at com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object, EventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs)
         at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
         at System.Windows.Forms.Control.WndProc(Message&)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message&)
         at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
         at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
         at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
         at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
         at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
         at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
         at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
         at System.Windows.Forms.Application.Run(Form)
         at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
    -EXCEPTION-END----
    -EXCEPTION-START- : Open Save Services Failure. Breaking the Action. ---
    Exception Message: Check: RFC Exception
    Exception    at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.RFCGetMessages(String& piLastNCalls, BExMessages& peMsgList)
       at com.sap.bi.et.BExOpenSaveServices.OSDataProvider70.ClearServerMessageHandler()
       at com.sap.bi.et.BExOpenSaveServices.OSDialog.OpenObject(BExObjectType pServiceObjType, BExObjectType[] pSelectableSubObjTypes, Form pParentForm, String pDlgTitle, BExMessages& peMessages)
       at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form parent, String iType)
    Full Stack:
         at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
         at com.sap.bi.et.wad.Trace.Exception(Exception, String)
         at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenObject(Form, String)
         at com.sap.bi.et.wad.WADBackend.WADOSDialogues.OpenSimpleObject(BExObjectType, String&, String&, Form)
         at com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String)
         at com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object, EventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs)
         at System.Windows.Forms.Control.WmMouseUp(Message&, MouseButtons, Int32)
         at System.Windows.Forms.Control.WndProc(Message&)
         at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message&)
         at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
         at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
         at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
         at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
         at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
         at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
         at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
         at System.Windows.Forms.Application.Run(Form)
         at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
    -EXCEPTION-END----

    Andrea,
    Try using ST22 to see if it gives you a detailed error message. If it is listed it will tell you what it is missing.
    Cheers,
    Rusty

  • Web Application Designer standstill since BW SP25 / BI Java SPS 23

    Hi experts,
    in February we implemented the latest SPs into a SAP development system of our customer.
    Since then the BEx Web Application Designer doesn't work anymore for them.
    It just hangs up and you cannot even close it.
    I will provide the tracefile in an answer to this post because otherwise the post won't be readable.
    I've found note 1437358 concerning NullPointerException (but not NullReferenceException) but I doubt that this has something to do with our issue.
    Does anybody have an idea what could cause this problem and how it could be solved?
    WAD 7.20 is used.
    Best wishes
    Marie

    10:57:23.559: Info: Web Application Designer Start. Revision: 7100.4.1200.491
    BExCheckFrontend.CheckFrontend: No Check performed (20110322) 0
    10:57:32.933: Connected. System: HWT
    -EXCEPTION-START- 10:57:35.198: DEBUG EXCEPTION ###  ---
    Exception Name: ArgumentException
    Exception Message: Das Element wurde bereits hinzugefügt. Schlüssel im Wörterbuch:tartitle. Hinzuzufügender Schlüssel: tartitle.
    Exception    bei System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
       bei System.Collections.Hashtable.Add(Object key, Object value)
       bei System.Collections.Specialized.StringDictionary.Add(String key, String value)
       bei com.sap.bi.et.wad.wadconst.WADShortNames.InitShortNames(XmlDocument iTagList, XmlNamespaceManager insmgr)
       bei com.sap.bi.et.wad.man.WADfrmMainWindow.PubMainWindow_Load(Object eventSender, EventArgs eventArgs)
       bei System.EventHandler.Invoke(Object sender, EventArgs e)
       bei System.Windows.Forms.Form.OnLoad(EventArgs e)
       bei System.Windows.Forms.Form.OnCreateControl()
       bei System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       bei System.Windows.Forms.Control.CreateControl()
       bei System.Windows.Forms.Control.WmShowWindow(Message& m)
       bei System.Windows.Forms.Control.WndProc(Message& m)
       bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       bei System.Windows.Forms.ContainerControl.WndProc(Message& m)
       bei System.Windows.Forms.Form.WmShowWindow(Message& m)
       bei System.Windows.Forms.Form.WndProc(Message& m)
       bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Full Stack:   bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
       bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
       bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
       bei System.Windows.Forms.Control.WndProcException(Exception e)
       bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
       bei Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
       bei Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
       bei Syncfusion.Windows.Forms.Tools.MainWindowSubclass.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
       bei System.Windows.Forms.Control.SetVisibleCore(Boolean value)
       bei System.Windows.Forms.Form.SetVisibleCore(Boolean value)
       bei System.Windows.Forms.Control.Show()
       bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
    -EXCEPTION-END----
    -CALLING-FROM- 10:57:35.198: DEBUG EXCEPTION ###  ---
       bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
       bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
       bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
       bei System.Windows.Forms.Control.WndProcException(Exception e)
       bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
       bei Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
       bei Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.WndProc(Message& m)
       bei Syncfusion.Windows.Forms.Tools.MainWindowSubclass.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
       bei System.Windows.Forms.Control.SetVisibleCore(Boolean value)
       bei System.Windows.Forms.Form.SetVisibleCore(Boolean value)
       bei System.Windows.Forms.Control.Show()
       bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
    -EXCEPTION-START- 10:57:47.399: DEBUG EXCEPTION ###  ---
    Exception Name: NullReferenceException
    Exception Message: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
    Exception    bei com.sap.bi.et.wad.man.WADfrmMainWindow.RefreshInitialTemplateList()
       bei com.sap.bi.et.wad.man.WADTemplateController.OnTemplateOpened(WebTemplate iTemp)
       bei com.sap.bi.et.wad.pageobjects.WebTemplateFactory.TemplateOpenedEventHandler.Invoke(WebTemplate iTemplate)
       bei com.sap.bi.et.wad.pageobjects.WebTemplateFactory.AddTemplateOrLibrary(WebTemplate iTemplate)
       bei com.sap.bi.et.wad.pageobjects.WebTemplateFactory.RegisterTemplateOrLibrary(IWebTemplate iWebTemplate)
       bei com.sap.bi.et.wad.man.WADTemplateController.LoadTemplate(EnumLoadMode iLoadMode, String iFileName, String iTechName, Boolean iAsLibrary, String iEnqueueMode, Boolean iAsCopy, Boolean iForceRawEdit)
       bei com.sap.bi.et.wad.man.WADTemplateController.DoLoadTemplateFromBW(String iTechname)
       bei com.sap.bi.et.wad.man.WADfrmMainWindow.itmOpenWebTemplate_Click(Object eventSender, EventArgs eventArgs)
       bei Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
       bei Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
       bei Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs e)
       bei Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs e)
       bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       bei System.Windows.Forms.Control.WndProc(Message& m)
       bei Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message& m)
       bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Full Stack:   bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
       bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
       bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
       bei System.Windows.Forms.Control.WndProcException(Exception e)
       bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       bei System.Windows.Forms.Application.Run(Form mainForm)
       bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
    -EXCEPTION-END----
    -CALLING-FROM- 10:57:47.399: DEBUG EXCEPTION ###  ---
       bei com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       bei com.sap.bi.et.common.appl.Log.Debug.Exception(Exception ex, String iAdditionalInformation)
       bei com.sap.bi.et.common.appl.Handlers.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
       bei System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
       bei System.Windows.Forms.Control.WndProcException(Exception e)
       bei System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
       bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       bei System.Windows.Forms.Application.Run(Form mainForm)
       bei com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()

  • Web Application designer display authorization

    Hi,
    How can I restrict web application designer authorization to just display?
    Thanks
    Unni

    Hi Unni,
    I know that it is possible to insert an authority check for the starting activity of the Web Appl.Designer (just to delete the comment character from the first row of the  RSAH_TOOL_AUTHTY_CHECK function module, as explained in the OSS Note 605417), but I don't know if the type of restriction you need is available (design only on the Web AD) on the system...
    Hope this helps.
    Bye,
    Roberto

  • Web Application Designer need help ASAP

    Hi All,
    I have a requirement to customize the analysis item in a web application designer.
    I have created new templetes and added a analysis with a query view as data provider .
    in the output I require to hide some rows of the query view and also change the color of the text i.e the numbers.
    How to modify the output of the analysis item which is coming from a query view or is there any way where I can modify the output of the web templete.
    Thanking You,
    Rukmini

    Dear Devi,
    If you do not want to use the default display and behavior of the Analysis Web item, you can use the Modification parameter to change them. You can modify the table structure and the table cells.
    The Modification parameter provides modules whose use can be controlled using additional parameters.
    This function enables you to use similar options to those available in earlier releases with the Web Design API for Tables. Unlike the Web Design API for Tables, modifications enable you to make targeted changes to the display and behavior without any programming.
    Prerequisites
    The modules are the main prerequisites for making modifications to the Analysis Web item. The modules are implemented in Java. The SAP Basis infrastructure in SAP NetWeaver 7.0 does not support any customer modifications or extensions to Java coding. Customers are therefore not able to develop their own modules for modifications to the Analysis Web item.
    SAP delivers a number of sample modules. You can use parameters to modify the display and behavior of these modules.
    Procedure
    You use the modules as follows:
           1.      Select a module from the sample modules.
           2.      Specify the module in the Modification parameter of the Analysis Web item.
           3.      Control the display and behavior of the module by specifying the module-specific parameters.
    Result
    The table of the Analysis Web item is displayed in an individual manner using the modules. The behavior of the table may also be different. For example, you can define commands for table cells.
    Example
    For example, you can define a fixed column width or display comments in cells.
    For more info :
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
    Hope this helps u..
    Best Regards,
    VVenkat..

  • Problem with layout in Web Application Designer

    Hi all,
       I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and  choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
    Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows  the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
    Thanks in advance,
    Mª del Mar Bonilla.

    Bonilla,
    Welcome to SDN...
    Try this out...
    In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
    Just update the result of what I have mentioned above...
    Hope it helps..
    Arun
    P.S Assigning points is a way fo saying thank you in SDN

  • URL link in rows/colomns of a report web application designer.

    Hi,
    I would like to create a URL link in a report which jumps to documents on livelink.
    For example:
    1.  bw    30.000    www. google.nl
    2.  sap   40.000    www. sap.com
    3. basis  50.000   www. nu.nl
    etc.
    etc.
    Do all the rows have different URLS, is that possible in the web application designer? Or do I have to use RRI? Or a user exit?
    Thanks for your help en replies.
    Rishma.
    Edited by: R. Debi on Oct 7, 2010 11:20 AM

    I used the RRI already but would like to have a hyperlink in the report. (So, the prefix of the URL is always the same an I have put this in RRI and used the & and contract ID as dynamic part of the URL.)
    In a BW web report, our customer would like to display a characteristic value as a hyperlink, so that when clicking on the link, the user is taken to an external website holding a document.  SO I am just looking for a javascript perhaps? Or maybe even abap in transformation? To actually create the hyperlink in this report.
    Thanks a lot,
    Rishma

  • To use Web Application Designer release 2004s do we need to have portals???

    Hi
    I would like some clarity regarding whther we need a portal or not.
    If you use Web Application Designer (SAP BW 3.x) it works fine, you can create reports and then it shows in SAP Easy Access under favourites. Executes fine, no portal is used.
    Now when I want to use the new Web Application Designer I can not execute the reports. Gives me error
    "Java communication error: RFC destination NOT_CONFIGURED does not exist", the window it appears in has a text saying it can't conect to the portal. Then notes that I look at regarding this seems that the connection between SAP BW and Portal must be set up.
    So can please someone tell me whether you need the portal to use the new Web Application Designer release 2004s
    Thanks in advance

    YOu neeed BI Java configured
    If you do not use any new BEx Web functions, do you have to install the usage types BI Java and EP?
    answer -SAP EP 6.0 Portals could be integrated into a federated portal system landscape using URL iViews.
    For more insights - FAQ
    Pls read carefuly should answer all your current and future questions.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
    Hope it Helps
    Chetan
    @CP..

  • Web Application Designer: Column width on analysis_item with BW 7.0

    Hi,
    I'm new to SAP world and I have found a problem I'm not able to solve. I'm working with the Web Application Designer and I want to modify the cell properties (such as cell width) for aligning different queries. In fact, my question are:
    <b>
    1. Is it possible to hard-code/specify column widths of the analysis_item?
    2. The property width of the analysis_item doesn't work, does it?
    </b>
    Thanks for your time and efforts.
    Message was edited by:
            Daniel Rubio

    Hi,
    I have just discovered the capability of modifying columns widths with css properties.
    So if I add to the head section of the html:
    div.prueba2 .urSTTDBdr1
    div.prueba2 .urSTTDBdr
    div.prueba2 .urSTTDBdr2
    And later I put the AnalysisItem between a div class="prueba2" and /div, the columns widths are changed.
    Do you know where can I find all the style properties (such as urSTTDBdr1) and its functions?
    Thanks

  • Hiding table columns in web application designer

    Hi,
    Can anyone please tell me how to hide the columns of a table which im using in a web application template as analysis. E.g : if i have 7 columns in my table and i dont want to show that particular column  i.e 7th and m using the same query somewhere else also to show other information so i cannot change my query but i want to hide it at web application designer level.
    Any help will be appreciated.
    Thanks & Regards

    Hi Preetha,
    I think best solution to your problem(keeping future enhancements in mind) is to create a query view based on the query that you are using.
    Move the unwanted characteristics to free chars section or hide the unwanted key figures.
    Then resave this query view.
    You can use this query view as a data provider to this table.
    Hope this helps.
    Thanks and Regards,
    Anup Kulkarni

Maybe you are looking for