Starting with kernel 3.14 computer resets on boot up.
when arch switched to the 3.13 kernel my computer appears to boot normally then just resets, shuts off and starts rebooting again. Happens still with 3.14 kernel. I have been using lts kernel but that switched to 3.14 just in the last few days. Side note, I really feel that switching the lts kernel from 3.10 to 3.14 is newsworthy.
Anywho, the last thing i notice on the screen is "Automounting fs on demand" or something and something about rfkill.
i removed one of my ssd and one of my gfx cards with same results so i doubt it's a power issue.
Tell me what to do!
Thank you in advance.
You guys have gotten me thru plenty of scrapes in the past.
Here is my boot log http://pastebin.com/1CcFULUr
Last edited by skinney6 (2014-07-09 02:39:27)
skinney6 wrote:
There are the linux-lts310 and linux-lts312 packages available in the AUR if you feel you have to stay with one of those branches.
if i wanted to build again with a custom config do i replace config or config.x86_64?
I am running x86_64 system.
You're welcome!
It's probably best to set the _makenconfig= to _makenconfig=y in the PKGBUILD and play around with that to build a custom config (and then unset _makenconfig= after the build if your happy). That'll kick out a nicely created config.x86_64.last file which you can rename to config.x86_64 if you want to use it for future builds.
Similar Messages
-
Hello,
I have been trying to install Windows 7 on my macbook pro (mid 2009, MBP53). I have successfully created a bootcamp partition using the assistant. When the computer tries to boot from the windows 7 install dvd, the screen is just black. The dvd spins for a bit, then stops and the computer is just black (no blinking cursor).
Any advice would be very appreciated.
Thanks.What kind of an install DVD are you using for Windows?
You can use any DVDs that are hardware specific. Only the full non-hardware soecific DVDs work on the Mac.
Allan -
10.7.4 "boken folder" icon with kernel panic when computer starts
Using iMovie and got a (-50) error and ran Disk Utilities to see if everything was okay. Unfortunatly it wasn't and recomended that I hold down the command and r key while doing a restart. When I do this, the Apple logo comes up, but then switches to an icon of a circle with a diagonal line through it and then I get a kernel panic shortly after. Any ideas how my App Store purchesed lion can run disk utilities in protected mode?
Your hard drive has probably failed. What backups do you have?
-
Linux not starting with fsck.ext3: Unable to resovle 'Label=/boot' error
I tried to setup fs by following this
http://blogs.oracle.com/AlejandroVargas/2006/12/how_to_create_configure_and_mo.html
now i restarted & its not staring , i think if i change /etc/fstab and put the setting back i will be able to start it, But new to linux, any body know how to boot it in maintenace mode ? & put the files back i made changes?any body know how to boot it in maintenace mode ?If you could not boot into your system successfully, you need boot into rescue mode from Linux installation CD and then update your /etc/fstab.
Here are steps:
The system should boot from media and land you at the linux boot prompt (boot:). Enter 'linux rescue' and answer the
questions posed ie.:
language - english
keyboard - us
start network - no
mount system under /mnt/sysimage - continue
You may refer to the link:
http://www.redhat.com/docs/manuals/linux/RHL-7.2-Manual/custom-guide/rescuemode.html -
[S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0
After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
[edit] I should mention that this upgrade was run April 30th.[/edit]
When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
journalctl _PID=1799
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
which I already mentioned. At this point that bit of the Wiki stopped being useful.
Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
Still, the question remains, “why did that happen, and how do I actually fix it?”
[edit2=solution]
There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
Last edited by nstgc (2015-05-05 12:07:30)Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
grub.cfg now looks like
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
font="/arch/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
else
search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
fi
chainloader +1
menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
else
search --no-floppy --fs-uuid --set=root FE2648382647EFE7
fi
chainloader +1
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
linux16 /arch/boot/memtest86+/memtest.bin
fi
### END /etc/grub.d/60_memtest86+ ###
It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
[edit] System still boots. Trying for the upgrade.
[edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
[edit3] Successfully downgraded.
[edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
accountsservice 0.6.40-1
acl 2.2.52-2
adobe-source-han-sans-jp-fonts 1.002-1
adwaita-icon-theme 3.16.0-1
alsa-lib 1.0.29-1
alsa-plugins 1.0.29-2
alsa-utils 1.0.29-1
alsi 0.4.7-1
arch-install-scripts 15-1
arch-wiki-docs 20150219-1
arch-wiki-lite 20150219-2
archlinux-keyring 20150212-1
arpack 3.2.0-1
aspell 0.60.6.1-2
asunder 2.7-1
at-spi2-atk 2.16.0-1
at-spi2-core 2.16.0-1
atk 2.16.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-15
awesome 3.5.6-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
bcache-tools 1.0.8-1
bigpkg 0.4.0-2
binutils 2.25-2
bison 3.0.4-1
blas 3.5.0-1
bluez 5.30-1
bluez-libs 5.30-1
bonnie++ 1.97-1
boost 1.58.0-1
boost-libs 1.58.0-1
btrfs-progs 3.19.1-1
bullet 2.82-1
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.18-3
ca-certificates-utils 20150402-1
cabextract 1.4-3
cairo 1.14.2-1
cairo-clock 0.3.4-4
cairo-dock 3.4.1-1
cairo-dock-plug-ins 3.4.1-1
cairomm 1.10.0-3
calibre 2.27.0-1
cantarell-fonts 0.0.16-2
caribou 0.4.18.1-1
cddb-py 1.4-7
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrtools 3.01a28-1
celt 0.11.3-2
cfv 1.18.3-6
cheese 3.16.1-1
chmlib 0.40-4
chromaprint 1.1-2
chromium 42.0.2311.135-1
chromium-pepper-flash 1:17.0.0.169-3
cifs-utils 6.4-1
cinnamon-desktop 2.4.2-1
cinnamon-translations 2.4.4-1
clementine 1.2.3-5
clucene 2.3.3.4-8
clutter 1.22.0-2
clutter-gst2 2.0.14-1
clutter-gtk 1.6.0-2
cmus 2.6.0-4
cogl 1.20.0-1
colord 1.2.9-2
colord-gtk 0.1.26-2
compositeproto 0.4.2-3
confuse 2.7-3
coreutils 8.23-1
cracklib 2.9.4-1
cryptsetup 1.6.6-1
cups 2.0.2-4
cups-filters 1.0.68-1
cups-pk-helper 0.2.5-1
curl 7.42.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.2-1
dhcpcd 6.8.1-1
dia 0.97.3-1
dialog 1:1.2_20150225-1
dictd 1.12.1-4
diffutils 3.3-2
ding-libs 0.4.0-3
djvulibre 3.5.27-1
dnssec-anchors 20150403-1
dotconf 1.3-4
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
dvdisaster 0.72.6-1
e2fsprogs 1.42.12-2
ecryptfs-utils 106-1
ed 1.11-1
efl 1.13.2-1
elementary 1.13.2-1
elfutils 0.161-3
enca 1.16-1
enchant 1.6.0-5
enlightenment 0.19.4-1
evas_generic_loaders 1.13.2-1
evince 3.16.0-1
exempi 2.2.2-1
exfat-utils 1.1.1-1
exif-py 1.2.0-1
exiv2 0.24-1
expac 4-3
expat 2.1.0-4
extcalc 0.9.3_1-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.2-1
fbreader 0.99.4-4
ffmpeg 1:2.6.2-1
fftw 3.3.4-1
file 5.22-1
file-roller 3.16.1-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 37.0.2-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.457-1
flex 2.5.39-1
fltk 1.3.3-4
fluidsynth 1.1.6-4
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db 3:20150308-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fribidi 0.19.6-2
fsarchiver 0.6.19-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
gawk 4.1.2-1
gc 7.4.2-2
gcc-fortran 4.9.2-4
gcc-libs-multilib 4.9.2-4
gcc-multilib 4.9.2-4
gconf 3.2.6-3
gcr 3.15.92-1
gd 2.1.1-2
gdb 7.9-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
geany 1.24.1-1
gemrb 0.8.2-1
geoclue 0.12.99-2
geoclue2 2.2.0-2
geocode-glib 3.16.0-1
gettext 0.19.4-1
ghostscript 9.16-1
giflib 5.1.1-1
git 2.3.7-1
gjs 1.43.3-1
glew 1.12.0-1
glib-networking 2.44.0-2
glib2 2.44.0-1
glibc 2.21-3
glibmm 2.44.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-2
gnome-bluetooth 3.16.1-1
gnome-color-manager 3.16.0-1
gnome-control-center 3.16.1-2
gnome-desktop 1:3.16.1-1
gnome-dictionary 3.16.1-1
gnome-disk-utility 3.16.0-1
gnome-menus 3.13.3-1
gnome-online-accounts 3.16.0-2
gnome-session 3.16.0-1
gnome-settings-daemon 3.16.1-1
gnome-shell 3.16.1-2
gnome-shell-extensions 3.16.1-1
gnome-system-monitor 3.16.0-1
gnome-themes-standard 3.16.0-1
gnome-tweak-tool 3.16.1-1
gnome-video-effects 0.4.1-1
gnupg 2.1.3-3
gnuplot 5.0.0-2
gnutls 3.4.0-1
gobject-introspection 1.44.0-1
gobject-introspection-runtime 1.44.0-1
google-chrome 42.0.2311.135-1
gparted 0.22.0-1
gpgme 1.5.4-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
grilo 0.2.12-1
groff 1.22.3-3
grsync 1.2.5-1
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.16.1-1
gsfonts 20150122-1
gsm 1.0.13-8
gssproxy 0.4.1-1
gst-libav 1.4.5-1
gst-plugins-bad 1.4.5-2
gst-plugins-base 1.4.5-1
gst-plugins-base-libs 1.4.5-1
gst-plugins-good 1.4.5-2
gst-plugins-ugly 1.4.5-2
gstreamer 1.4.5-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-14
gstreamer0.10-ugly-plugins 0.10.19-14
gthumb 3.4.0-1
gtk-update-icon-cache 2.24.27-1
gtk2 2.24.27-1
gtk3 3.16.2-1
gtkmm 2.24.4-1
gtkmm3 3.16.0-1
guile 2.0.11-2
gvfs 1.24.1-1
gvfs-mtp 1.24.1-1
gzip 1.6-1
hal-info 0.20091130-2
harfbuzz 0.9.40-2
harfbuzz-icu 0.9.40-2
haveged 1.9.1-2
hdparm 9.45-1
hdsentinel 0.8-2
help2man 1.46.4-1
hicolor-icon-theme 0.13-1
hplip 3.15.4-1
hspell 1.2-2
htmlcxx 0.85-4
htop 1.0.3-2
hunspell 1.3.3-1
hwids 20150129-1
hwinfo 21.10.1.1-1
hwloc 1.10.1-1
hyphen 2.8.8-1
i3-wm 4.10.2-1
i3lock 2.6-1
i3status 2.9-1
i7z 0.27.2.git1-1
iana-etc 2.30-4
icedtea-web 1.5.2-1
icu 55.1-1
imagemagick 6.9.1.0-1
imagewriter 1.10.1420800585.134a9b3-1
imlib2 1.4.7-1
inetutils 1.9.2-2
innoextract 1.4-0
inputproto 2.3.1-1
intel-tbb 4.3_20150209-1
intel-ucode 20150121-1
inxi 2.2.19-1
iproute2 3.19.0-1
iptables 1.4.21-3
iputils 20121221-3
ipython 3.1.0-1
iso-codes 3.57-1
jack 0.124.1-3
jansson 2.7-1
jasper 1.900.1-13
java-environment-common 2-2
java-runtime-common 2-2
jdk7-openjdk 7.u79_2.5.5-1
jfsutils 1.1.15-4
jmtpfs 0.5-1
jre7-openjdk 7.u79_2.5.5-1
jre7-openjdk-headless 7.u79_2.5.5-1
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
jsoncpp 1.4.4-1
julia 2:0.3.7-1
julia-docs 2:0.3.7-1
kbd 2.0.2-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
kvirc 4.2.0-4
lame 3.99.5-2
lapack 3.5.0-1
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.20-1
ldns 1.6.17-2
less 471-1
lgogdownloader-git 20150310-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.29-1
lib32-alsa-plugins 1.0.29-2
lib32-atk 2.16.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.14.2-1
lib32-curl 7.41.0-1
lib32-db 5.3.28-2
lib32-e2fsprogs 1.42.12-1
lib32-elfutils 0.161-2
lib32-expat 2.1.0-2
lib32-fakeroot 1.20.2-1
lib32-flac 1.3.1-1
lib32-flashplugin 11.2.202.457-1
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gdk-pixbuf2 2.31.3-2
lib32-gettext 0.19.4-1
lib32-giflib 5.1.1-1
lib32-glew 1.12.0-1
lib32-glib2 2.44.0-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.4.0-2
lib32-gsm 1.0.13-9
lib32-gtk2 2.24.27-1
lib32-harfbuzz 0.9.40-2
lib32-icu 55.1-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.110-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 2.0.2-2
lib32-libdbus 1.8.16-1
lib32-libdrm 2.4.60-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libidn 1.30-1
lib32-libjpeg-turbo 1.4.0-1
lib32-libldap 2.4.40-1
lib32-libltdl 2.4.5-1
lib32-libnl 3.2.25-1
lib32-libogg 1.3.2-1
lib32-libpcap 1.6.2-1
lib32-libpciaccess 0.13.4-1
lib32-libpng 1.6.16-1
lib32-libpulse 6.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libssh2 1.5.0-1
lib32-libtasn1 4.4-1
lib32-libtiff 4.0.3-3
lib32-libtxc_dxtn 1.0.1-5
lib32-libusb 1.0.19-1
lib32-libvorbis 1.3.5-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.2-1
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.2-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.2-1
lib32-libxslt 1.1.28-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxxf86vm 1.1.4-1
lib32-llvm-libs 3.6.0-1
lib32-mesa 10.5.4-1
lib32-mpg123 1.22.1-1
lib32-ncurses 5.9-3
lib32-nettle 3.1.1-1
lib32-nspr 4.10.8-1
lib32-nss 3.18-1
lib32-nvidia-libgl 349.16-1
lib32-nvidia-utils 349.16-1
lib32-openal 1.16.0-1
lib32-openssl 1.0.2.a-1
lib32-p11-kit 0.23.1-2
lib32-pango 1.36.8-1
lib32-pcre 8.36-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-readline 6.3.008-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.9-1
lib32-systemd 219-1
lib32-tdb 1.3.4-1
lib32-util-linux 2.26.1-1
lib32-v4l-utils 1.6.0-1
lib32-wayland 1.7.0-1
lib32-wxgtk 3.0.2-4
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libabw 0.1.1-1
libaio 0.3.110-1
libao 1.2.0-1
libarchive 3.1.2-8
libart-lgpl 2.3.21-3
libass 0.12.1-1
libassuan 2.2.0-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.8.0-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcdr 0.1.1-2
libcl 1.1-4
libcroco 0.6.8-2
libcue 1.4.0-4
libcups 2.0.2-4
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdca 0.0.5-4
libdrm 2.4.60-2
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdcss 1.3.0-1
libdvdnav 5.0.2-1
libdvdread 5.0.1-1
libe-book 0.1.2-2
libebml 1.3.1-1
libedit 20150325_3.1-1
libepoxy 1.2-2
libetonyek 0.1.1-1
libev 4.19-1
libevdev 1.4.2-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.3-1
libftdi-compat 0.20-1
libgcrypt 1.6.3-2
libgcrypt15 1.5.4-4
libgdm 3.16.1.1-1
libgee 0.18.0-1
libglade 2.6.4-5
libgme 0.6.0-3
libgnome-keyring 3.12.0-2
libgnomekbd 3.6.0-2
libgpg-error 1.19-1
libgpod 0.8.3-4
libgssglue 0.4-2
libgsystem 2015.1-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libgweather 3.16.1-1
libgxps 0.2.2-3
libibus 1.5.10-1
libical 1.0.1-2
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.30-1
libiec61883 1.2.0-4
libimobiledevice 1.2.0-1
libinput 0.14.1-1
libirman 0.4.5-4
libjpeg-turbo 1.4.0-1
libkate 0.4.1-5
libksba 1.3.3-1
liblastfm 1.0.9-1
libldap 2.4.40-2
liblqr 0.4.2-1
libmaa 1.3.2-2
libmad 0.15.1b-7
libmatroska 1.4.2-1
libmediainfo 0.7.73-1
libmikmod 3.3.7-1
libmm-glib 1.4.6-1
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.3-1
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspub 0.1.2-2
libmtp 1.1.8-1
libmwaw 0.3.4-1
libmygpo-qt 1.0.8-1
libndp 1.4-1
libnewt 0.52.18-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libodfgen 0.1.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpagemaker 0.0.2-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.4-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
libpwquality 1.2.3-1
libquvi 0.9.4-3
libquvi-scripts 0.9.20131130-2
libqzeitgeist 0.8.0-4
libraw 0.16.0-3
libraw1394 2.1.0-2
libreoffice-fresh 4.4.2-1
librevenge 0.0.2-1
librpcsecgss 0.19-8
librsvg 1:2.40.9-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.2.0-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.4.1-1
libsigsegv 2.10-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 1.0.2-1
libsoup 2.50.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh 0.6.5-1
libssh2 1.5.0-1
libsystemd 219-6
libtar 1.2.20-2
libtasn1 4.4-1
libteam 1.14-2
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtiger 0.3.4-4
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunibreak 1.1-1
libunistring 0.9.5-1
libunwind 1.1-2
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.26.1-3
libva 1.5.1-1
libvdpau 1.1-1
libvisio 0.1.1-2
libvisual 0.4.0-5
libvorbis 1.3.5-1
libvpx 1.4.0-2
libwacom 0.11-1
libwbclient 4.2.1-1
libwebp 0.4.3-1
libwmf 0.2.8.4-12
libwpd 0.10.0-1
libwpg 0.3.0-1
libwps 0.3.1-1
libx11 1.6.3-1
libx264 2:144.20150223-1
libx86 1.1-4
libx86emu 1.1.23.1-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxp 1.0.3-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.9-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
libyaml 0.1.6-1
libzen 0.4.31-1
libzip 0.11.2-1
licenses 20140629-1
links 2.9-1
linux 3.19.3-3
linux-api-headers 3.18.5-1
linux-firmware 20150410.ec89525-1
lirc 1:0.9.2.a-1
llvm-libs 3.6.0-5
lm_sensors 3.3.5-1
logrotate 3.8.9-1
lpsolve 5.5.2.0-3
lrzip 0.621-1
lua 5.2.4-1
lua-bitop 1.0.2-5
lua-expat 1.3.0-1
lua-lgi 0.8.0-2
lua-socket 3.0rc1-4
lua51 5.1.5-4
luajit 2.0.3-3
lvm2 2.02.116-1
lxdream 0.9.1-3
lz4 128-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.83-1
mcomix 1.01-1
mcpp 2.7.2-5
mdadm 3.3.2-1
memtest86+ 5.01-1
mencoder 37379-3
mesa 10.5.4-1
metamorphose2 0.8.3-2
mime-types 9-1
minitube 2.4-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mkvtoolnix-cli 7.8.0-3
mobile-broadband-provider-info 20120614-2
morituri-git 0.2.3.r3.gb1d685f-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mpg123 1.22.1-1
mplayer 37379-3
mtdev 1.1.5-1
mutagen 1.28-1
mutter 3.16.1.1-1
ncurses 5.9-7
nemo 2.4.5-1
neon 0.30.1-1
net-snmp 5.7.3-1
netctl 1.10-2
nettle 3.1.1-1
network-manager-applet 1.0.0-2
networkmanager 1.0.0-2
nfs-utils 1.3.2-6
nfsidmap 0.26-1
nm-connection-editor 1.0.0-2
npth 1.2-1
nspr 4.10.8-1
nss 3.18-3
ntfs-3g 2015.3.14-1
nvidia 349.16-1
nvidia-libgl 349.16-1
nvidia-utils 349.16-1
ogmtools 1.5-5
openal 1.16.0-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openmpi 1.8.4-1
openresolv 3.6.1-1
openssh 6.8p1-2
openssl 1.0.2.a-1
opus 1.1-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.23.1-2
p7zip 9.38.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pacmatic 20150126-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.36.0-1
par2cmdline-tbb 20141125-1
parallel 20150322-1
parted 3.2-2
patch 2.7.5-1
pciutils 3.3.1-1
pcmciautils 018-7
pcre 8.36-2
pcsx2-git 1.3.1.r978.1aebca3-1
perl 5.20.2-1
perl-clone 0.37-2
perl-data-dump 1.22-1
perl-dbi 1.633-1
perl-encode-locale 1.04-1
perl-error 0.17023-1
perl-file-basedir 0.07-1
perl-file-listing 6.04-2
perl-file-which 1.09-4
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-ipc-system-simple 1.25-1
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-net-http 6.07-1
perl-uri 1.67-1
perl-www-robotrules 6.02-2
perl-xml-libxml 2.0121-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
phonon-qt4 4.8.3-1
phonon-qt4-gstreamer 4.8.2-1
phoronix-test-suite 5.6.0-1
php 5.6.8-2
pinentry 0.9.1-1
pixman 0.32.6-1
pkg-config 0.28-2
pkgfile 15-1
pms 1.90.1-1
podofo 0.9.3-1
polkit 0.112-2
poppler 0.32.0-1
poppler-glib 0.32.0-1
poppler-qt5 0.32.0-1
popt 1.16-7
portaudio 19_20140130-1
presentproto 1.0-1
printproto 1.0.5-3
procps-ng 3.3.10-2
protobuf 2.6.1-1
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 6.0-1
pulseaudio-alsa 2-3
pv 1.6.0-1
pygobject-devel 3.16.1-1
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
pyqt4-common 4.11.3-4
pyqt5-common 5.4.1-2
python 3.4.3-2
python-dateutil 2.4.1-1
python-dbus 1.2.0-4
python-dbus-common 1.2.0-4
python-gmpy2 2.0.5-2
python-gobject 3.16.1-1
python-html2text 2015.4.14-1
python-matplotlib 1.4.3-2
python-mpmath 0.19-1
python-nose 1.3.6-1
python-numexpr 2.4.3-1
python-numpy 1.9.2-2
python-pandas 0.16.0-2
python-pygments 2.0.2-2
python-pyparsing 2.0.3-1
python-pyqt4 4.11.3-4
python-pyqt5 5.4.1-2
python-pytz 2015.2-1
python-pyzmq 14.5.0-2
python-scipy 0.15.1-2
python-setuptools 1:15.2-1
python-sip 4.16.7-1
python-six 1.9.0-1
python-sympy 0.7.6-2
python-tornado 4.1.0-2
python-xdg 0.25-2
python2 2.7.9-1
python2-apsw 3.8.9-1
python2-atspi 2.16.0-1
python2-beaker 1.7.0-1
python2-cairo 1.10.0-2
python2-chardet 2.3.0-1
python2-cherrypy 3.6.0-1
python2-cssselect 0.9.1-2
python2-cssutils 1.0-2
python2-dateutil 2.4.1-1
python2-dbus 1.2.0-4
python2-dnspython 1.12.0-1
python2-gobject 3.16.1-1
python2-gobject2 2.28.6-11
python2-html5lib 0.999-5
python2-lxml 3.4.4-1
python2-mako 1.0.1-1
python2-markupsafe 0.23-2
python2-mechanize 0.2.5-4
python2-netifaces 0.10.4-1
python2-pillow 2.8.1-1
python2-psutil 2.2.1-2
python2-pycdio 0.20-3
python2-pygments 2.0.2-2
python2-pyqt5 5.4.1-2
python2-setuptools 1:15.2-1
python2-sip 4.16.7-1
python2-six 1.9.0-1
python2-xdg 0.25-2
qca 2.0.3-5
qca-ossl 2.0.0-7
qjson 0.8.1-3
qpdf 5.1.2-1
qt4 4.8.6-5
qt5-base 5.4.1-4
qt5-declarative 5.4.1-4
qt5-location 5.4.1-4
qt5-script 5.4.1-4
qt5-sensors 5.4.1-4
qt5-svg 5.4.1-4
qt5-tools 5.4.1-4
qt5-translations 5.4.1-4
qt5-webchannel 5.4.1-4
qt5-webkit 5.4.1-4
qt5-xmlpatterns 5.4.1-4
qtchooser 48-1
qtwebkit 2.3.4-1
randrproto 1.4.1-1
raptor 2.0.15-2
rasqal 1:0.9.32-1
readline 6.3.008-1
recode 3.6-8
recordproto 1.14.2-2
redland 1:1.0.17-2
reflector 2014.11-1
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.93-1
rhash 1.3.3-1
rng-tools 5-3
rpcbind 0.2.3-1
rsync 3.1.1-2
rtkit 0.11-5
rtmpdump 20140918-2
ruby 2.2.2-1
s-nail 14.8.0-1
sbc 1.3-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdcv 0.4.2-8
sdl 1.2.15-7
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_ttf 2.0.11-3
sed 4.2.2-3
sg3_utils 1.40-1
shadow 4.2.1-3
shared-color-targets 0.1.5-1
shared-mime-info 1.4-1
sip 4.16.7-1
slang 2.3.0-1
smartmontools 6.3-2
smbclient 4.2.1-1
smpeg 0.4.5-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spandsp 0.0.6-1
speech-dispatcher 0.8.1-1
speedtest-cli 0.3.1-1
speex 1.2rc2-1
speexdsp 1.2rc3-1
spotify 0.9.17.1-1
spotify-gnome-git 20141010-1
sqlite 3.8.9-1
startup-notification 0.12-4
steam 1.0.0.49-3
sudo 1.8.13-1
suitesparse 4.4.4-1
sysfsutils 2.1.0-9
systemd 219-6
systemd-sysvcompat 219-6
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.2-1
tar 1.28-1
tdb 1.3.4-1
telepathy-glib 0.24.1-1
telepathy-logger 0.8.1-1
telepathy-mission-control 5.16.3-1
terminology 0.8.0-1
tevent 0.9.24-1
texinfo 5.2-3
texlive-bin 2014.34260-7
texlive-core 2014.36709-1
texlive-langchinese 2014.35921-1
texlive-langcjk 2014.0-1
texlive-langjapanese 2014.36466-1
texlive-langkorean 2014.36573-1
texlive-latexextra 2014.36706-1
texlive-pictures 2014.36605-1
texlive-science 2014.36659-1
texmaker 4.4.1-1
thin-provisioning-tools 0.4.1-1
thunderbird 31.6.0-2
tinyxml 2.6.2-3
tmux 1.9_a-2
totem-plparser 3.10.4-1
transmission-gtk 2.84-1
tsmuxer 1.10.6-14
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
tzdata 2015d-1
udisks2 2.1.5-1
unrar 1:5.2.7-1
unzip 6.0-10
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vim 7.4.712-1
vim-latexsuite 20130126-2
vim-runtime 7.4.712-1
vlc 2.2.1-2
vte-common 0.40.0-2
vte3 0.40.0-2
wavpack 4.70.0-2
wayland 1.7.0-1
webkit2gtk 2.8.1-1
webkitgtk 2.4.8-2
webrtc-audio-processing 0.1-2
wesnoth 1.12.2-2
wesnoth-data 1.12.2-1
wget 1.16.3-1
which 2.21-1
wildmidi 0.3.8-1
wine 1.7.42-2
winetricks 20141130-1
wireless_tools 30.pre9-1
wpa_supplicant 1:2.3-1
wxgtk 3.0.2-4
wxgtk2.8 2.8.12.1-3
wxpython 3.0.2.0-1
wxpython2.8 2.8.12.1-1
x265 1.6-1
xboxdrv 0.8.5-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-su 1.2.3-1
xdg-utils 1.1.0.git20150323-1
xdiskusage 1.51-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.2-1
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-appres 1.0.4-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-5
xorg-server-common 1.17.1-5
xorg-server-devel 1.17.1-5
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-util-macros 1.19.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xscreensaver 5.32-1
xvidcore 1.3.3-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zenity 3.14.0-1
zeromq 4.0.5-1
zita-alsa-pcmi 0.2.0-2
zita-resampler 1.3.0-3
zlib 1.2.8-3
zvbi 0.2.35-1
zziplib 0.13.62-2
[edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
Last edited by nstgc (2015-05-04 13:16:09) -
HT5628 How start with windows 8 automatically using bootcamp?
How i can start with windows 8 using bootcamp?
When booted under MacOS, you can go to the System Preferences and select your "Startup Disk". This will allow you to indicate which partition you want your computer to boot from normally, or on just the reboot that you are initiating at that time. If you have already installed the Boot Camp Utilities under Windows, you can do similar from the tray icon that it loads. If you boot your Mac from teh Recovery Partition, one of the menu options is to specify the Starup Disk. You have many options to choose from.
-
G3PB now starts with Open Firmware page.
G3 PB running Os X 10.2.8 and now have Open Firmware page when starting. It has just begun doing this. I didn't think much of it at first but now each time I start I have the Open Firmware page asking me to type in "mac-boot" to start. It seems to go through the normal start after this but I am wondering what happened and how to avoid getting the Open Firmware start page?
firstfrost,
Your computer should not boot into Open Firmware without a prompt. Corrupted PRAM can cause this issue; reset and test.
http://docs.info.apple.com/article.html?artnum=2238 -
Hello Everybody,
Few months back I have upgraded my OS to latest Mountain Lion version.
I am facing a unique problem for last1 month. I am not able to open any of the apple website starting with the name "Apple" such as apple.com, http://www.apple.com/mac/, http://www.apple.com/ipod/ etc but I am successfuly able to open http://store.apple.com/ (as you can see this is not starting with apple but starting with store).
I have reseted my safari, tried different browser such Opera, but not successful.
Can you please provide a solution for this?
thanks
@diHi I have same prob on a client's Macbook Pro and iMac both on 10.5.8 (but problem there before update). Have deleted all cookies (and preferences and cookie database etc), history etc but problem reappears after 3 or links are clicked on www.apple.com site. If I clear cookies problem goes away again only to come back. Have tried creating a new user account - same problem! tried archive and install of OS X, same problem still. tried two different internet connections - same problem. problem not limited to web browsers either - iTunes has issues and client had his iPhone lock itself because he could not connect to apple to verify the device when he installed a software update. Major headache. Any ideas would be great!
-
Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral -
I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 24/12/2009 09:08:20
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer: George-XXL
Description:
Session "" failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
<EventRecordID>36</EventRecordID>
<Correlation />
<Execution ProcessID="1944" ThreadID="1948" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>George-XXL</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225485</Data>
<Data Name="LoggingMode">5</Data>
</EventData>
</Event>Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn't know what he's talking about because if you tell someone its ok to "safely ignore the errors in the event log" as a blanket instruction ESPECIALLY because as he stated so himself
he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it's just my opinion....I could be wrong! -
The calendar week view on my iphone 4s starts on a Sunday. I am synching with outlook on my computer (pc) which starts the week view on a Monday which I prefer. How do I change my iphone calendar view to start the week on a Monday? I am in Australia.
I have just noticed the other discussion points - mine is set to Australia.
Dear Apple - as the day that the week starts on can depend on country and religion - how about making it an option that the user can change????I believe the week view on the iPhone is handled by the Region settings in the phone. I am not aware of any other manner to change it, as you can with Outlook.
-
Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means? Thanks
0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.
-
hi i am having a problem with itunes on this computer every time the computer comes on i get a notification which says"the program cant start because MSVCR80.dll is missing from your computer,try reinstalling the program to fix this problem" but when i click on ok it just keeps popping up 4-5 time and then gone.and i cant dopwnload the itunes again.help
You need to work through the user tip: https://discussions.apple.com/docs/DOC-6562
-
Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.
See also https://forums.adobe.com/thread/1654402
-
Lightroom 5 - in all of the panels starting with Basic all titles are showing "Reset".
Lightroom 5 - in all of the panels starting with Basic all titles are showing "Reset". For example, Tone is now showing Reset Tone - Resent Presence.
In all panels the titles are showing "Reset". Can you please explain and tell me how to fix?
Thank you,
LouiseSounds like you have an [Alt/Opt] key stuck down. Pressing this key changes to the Reset mode. If your key isn't stuck, did you recently custom map some keystrokes?
Maybe you are looking for
-
How do you return to web page after executing servlet?
When I submit some values to my servlet from a page, using a from, how do I get back into the web page directory? When you call the servlet, the url turns to "./servlet", and if I click on submit again, it tries to find "./servlet/servlet" so obvious
-
Help Playing a MP3 files in a java application!
Hey, i need help playing MP3 files in a JFrame application. Any help is apperciated.
-
IPod Touch TV show list backwards...
I have episodes of 2 different TV shows on my iPod Touch, and while the show names are in alphabetical order, there is an issue when I go into the episode list of the shows. All of the episodes are listed in reverse order... Example: I have every epi
-
I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN? This is so o
-
Hi Experts, Id like to get to know if SAP Reuses the same (FM,ROUTINES,..) From the transaction code PR05 in the TRIP package PTRM_WEB_POWL. (Application: FITV_POWL_ASSISTANT ) I mean if they just make the UI in the Wedbdynpro/Abap part with the sam