Starts and shut down again.... Pleace help

Trouble while starting up. When i start the book, it shows the startup apple for å few seconds and then turns of, totaly...

Hello Amanda:
Welcome to Apple discussions.
If you installed the software that came from your printer from Lexmark - uninstall it. Most printers are plug and play - using the built in drivers in OS X. Then uninstall the printer and try to reinstall it.
Barry

Similar Messages

  • After cleaning my mac it opens and shuts down again please help!!!

    after cleaning my mac it opens and shuts down again please help!!!

    I opened the cover (there where the battery is) and I cleaned the dust gently with a dry napkin ...remove the battery and placed it again ...closed the cover and when i turn on my macbook bro now it shows the Apple logo and after some seconds it just shuts down (i have OSX 10.9 Mavericks)....
    I tried to boot in safe mode, also tried to repair it and even re-install Mavericks and so on, but I could not fix it. I did a hardware test and the no problems occurred.

  • I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down. Please Help me!

    Hello!
    I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
    But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
    The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
    Please Help me!
    MacBook Air (11-inch Mid 2009)

    Welcome to Apple Discussions
    You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
    Also remove any attached peripherals.
    Reboot in Repair mode (command-R at start)  and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
    You must have more than enough (not just enough) empty (free) disk space for the update.

  • HT201413 iphone 3GS apple logo persist and shut down frequently. please help.

    Iphone 3GS apple logo persist and shut down frequently

    Hello ramanathanfromsgp,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Does not start up past Apple logo
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Best of luck,
    Mario

  • My hp pavilion dv1000 (1615ts) has an overheatin​g problem and shuts down suddenly. please help..

    my hp pavilion dv1000 (1615ts) has an overheating problem and shuts down suddenly.  please help..

    with that age of laptop we immediately suspect an issue with dust clogging the exhaust fan or the thermal compound between the heatsink and fan breaking down and needing to be replaced. The laptop needs to be opened and inspected in other words. 

  • Why does starting and shutting down iTunes on my Mac stop movie from playing?

    Every time I start or shut down iTunes on my Mac, the movie I'm watching on my Apple TV stops playing and goes back to the menu.  It also loses the spot in the movie, so I have to fast forward to my spot.  Extremely annoying.  EVERY TIME.

    Unless it is actually associated with something not working, it isn't a problem. I've always seen it on my machine, which works perfectly and has done so for 2.5 years now.

  • I'm running Windows 7 and occasionally, Firefox will become completely unresponsive and grey out, then none of my programs will open at all, including the Start menu, forcing me to use a hard restart and shut down. Any help would be appreciated.

    I'm not able to close and restart Firefox at all, since the computer becomes completely unresponsive, save for mouse input. Task Manager is also of no use.

    Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
    DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • HT201263 My 3GS has gone faulty. It won't power up and with a wall charger connected, only gets as far as the apple logo. It then makes a vibration noise and shuts down again

    Hi guys, looking for some assistance with my 3GS. A few weeks back it started playing up. Shutting down suddenly and the like. Now, it's failing to start up. When I connect it to a wall charger, the apple logo comes on and after a short while it vibrates and then gives the 'connect to iTunes' message. The minute I disconnect from the wall, it just shuts down. If I keep it connected at the wall it goes through the above sequence before shutting down and repeats the cycle again and again.
    I've tried all the 'recovery' methods without any success. The device is not recognised by iTunes. I've taken it to small independent repair outlets who say they can't repair it. Is there anything I can do or is it totally gone for good?

    It MAY have a bad battery, and that may be all it needs. But you can't find out until you replace the battery, and then you might find out it's something different. It's a 4 year old phone; consider getting a newer model. If you take it to an Apple store they should be able to diagnose it. Make a Genius Bar appointment before going to avoid a long wait.

  • Ipod 2g will start and shut down after 10 secs on logo

    i will hold power button then it will start loading with the logo then after 10 secs it just shuts down and wont let me get to slider

    Try a hard reset. If that does not work, put it in Recovery or DFU mode and restore it.
    Basic troubleshooting steps 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Automatic start and shut down for Iphone

    Hello,
    I usually turn off my Iphone at nighttime.
    That is a nuisance because I have to turn it on and off every day and also I cannot use the built in alarm clock.
    A good idea would be to let the user set a timer that automatically start the Iphone in the morning and shut it down in the evening at a certain time.
    Could you please think about it?
    Many thanks
    Regards
    Andrea

    You can use the Do Not Disturb feature to keep the phone quiet during your down time, then you could use your phone as an alarm clock.  It's what I do.

  • IMac starting and shuts down after less than one minute...

    Hi !
    I hope someone could help me with this problem...
    I think I've tried everything... CMD+Alt+P+R / CMD+R / ... SMC...
    I'm a little lost because I can't access to the computer (it shuts down before arriving on the desktop). I've also tried to access just to the hard drive by connecting 2 Mac with Firewire cable... And the same problem appears. The iMac is also shutting down to soon to backup anything...
    Is there someone who has experienced the same problem ?
    Thanks !
    Best regards,
    Jonathan.

    Hi Jonathan..
    Just to rule out any hardware issues, might be a good time to run the OS X Lion: Use Apple Hardware Test

  • ICal starts and shuts down

    Hi,
    I have an iCal problem that I did not find an answer to. My iCal starts, shows appointments and tasks and such and then shuts down by itself after 10 - 20 seconds.
    I used 'The Missing Sync' in the past, but uninstalled it, and I recently ran the 10.4.11 update, but iCal did not change behavior.
    The HelveticaNeue font is installed in the correct directory and I am not using a font manager.
    Any suggestions are appreciated.
    ~frostey

    Frostey,
    Welcome to Apple Discussions.
    The first and easiest troubleshooting step involves replacing/refreshing the com.apple.iCal.plist file.
    Quit iCal and find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Drag the file to your Desktop, log out/in or restart and check iCal for normal behavior.
    ;~)

  • My iMac updates at startup with the logo then once it's done it shuts down. So I restart it and it just restarts the update and shuts down again. Any one know why?

    So I don't know why my iMac is doing this. It's a late 2009 model I believe. I was literally working perfectly fine a few minutes before this. I decided to reboot my Mac and this update started and I can't seem to get out of it. And I've rebooted several times and this update never seems to finish. 
    The most recent update as I usually update when the new ones come out..
    None the less does anyone know why this is happening?

    Okay. So the third or forth time resetting all those things didn't work. So I started up in safe mode. And currently it's spinning with a circle with the cross logo.
    I have it running off an external hard drive. I think it's due to to that nhence the logo.
    So I'll just let it sit he unless there's a way you know to make it pick up right away.

  • The bettry of my i pad was too low finally it was switched off automatically then i putted on charging but the charging is started after 5% it went on automatically after apple logo and shut down suddnly plz help me what i have to do i restarted but same

    i putted my low bettry i pad on charging but after 5% bettry it is goint to switch off automatically after apple logo and then suddnlywent switched off .i restarted again and again but the result are the same i need urgent help plz

    Hi there shehla sattar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W.

  • Final Cut Express Opens and Shuts Down?!  HELP!!!

    Hi there,
    I recently purchased Final Cut Express 2.0 and installed it onto my computer. After running into numerous glitches, I upgraded to FCE 3.5.
    I installed FCE 3.5 and LiveType and Soundbooth both are working great. However, when I open FCE, it begins to open and starts to load. You assume it is going to load in, but then the screen disappears and you are back to the desktop.
    I have deleted the preference files from the library, figuring that would be the solution. However, it seems as if that still has not solved my problem. I also tried Reparing Disc Utilities AND I tried re-installing just Final Cut Express after deleting the files that I thought might have been corrupt.
    Can anybody lend some advice as to what else I might try? If you have steps on how to do these things, that'd be great, too.
    The apple support people that I called said I should come on here, so please do not advise me to call Apple.
    THANK YOU!!!!

    Try trashing the preferences again making sure you delete ALL of them as described in this article by Tom:-
    http://www.fcpbook.com/Misc1.html
    If FCE still does not work, try reinstalling again but make sure you first of all UNINSTALL COMPLETELY like this :-
    http://docs.info.apple.com/article.html?artnum=301182
    You can ignore the LiveType and Soundtrack items.
    Ian.

Maybe you are looking for

  • Why aren't the pages of my site listed in the left-hand browser column?

    I've been able to edit the homepage of my site but the rest of the pages do not appear in the browser column and I haven't been able to figure out how to find them. Somehow I stumbled into the second page, I have no idea how. Anyone have any answers

  • Adobe Reader X Plug-In

    I am using Windows 7 Home Premium with Internet Explorer 9.0.4 and I am unable to open pdf in the browser.   I have tried going to the manage add-ons but it is not listed in any of the fields.  I really need to be able to open pdf's in the browser fo

  • Connecting two macs with eathernet

    I plugged in My eathernet cable with the eathernet ports of both computers and then rebooted both computers. and nothing happened. Does anyone know what the procedure is to get these computers talking to each other? Thanks Morrie

  • Creating Cells with differing heights in Numbers '09

    In any given Row is it possible to have different cells with different heights because I've found that if I set the cell height to be e.g. 1cm then all the cells in the whole row are 1cm which isn't always the desired effect. Thanks

  • IPhoto vs Canon's Digital Photo Professional for RAW

    Greetings, Quick question after not finding much while searching the forums: I'm currently using a MBP C2D, 2.33/2G ram, all updated software. Just got a Canon Rebel XTi, finally putting aside my Canon 35mm (for now anyway). Can someone offer feedbac