Startup Disk Full Error but disk shows only 20Gb on it!

I have a 150 Gb startup drive. I keep getting the error that the stratup drive is full and Get Info shows only 300Mb left on drive! Do get info on the 5 directories on the drive, Applications, Developer, Library, System, and Users and it all adds up to just over 20Gb. Am I missing something here? Ran Disk Utilities and the disk verifies ok and verified permissions and ok. I am running Time Machine but it backs up to an external firewire drive, not the startup disk.
I know that I can add another drive cheaply but I really want to know why this disk appears to be full. Any help? Thanks in advance!

There are lots of hidden directories. There could be actual data instead of alias mount points under "/Volumes" which is often one reason.
There are a couple programs to show where space is going, as well as sort output from terminal, but I prefer OmniGroup OmniDiskSweeper - look on MacUpdate - to show and access files. Program works fine even though shareware.
And yes, you might want to use the Raptor? for something else and get even WD 640GB for $75, or the 3rd gen VelociRaptor 300GB $289.
There are threads in "Using Leopard" regularly about "where did my space go."

Similar Messages

  • I am getting a Photoshop CC "scratch disk full" error, but my scratch disk is C:/ and I have 40 gigs of free space - help!?!

    Why is Photoshop giving me this error when I'm not working on files that are that big given the amount of free space on my computer? They're around 1.5 megs each, .jpeg files (not even PSD files) and I'm only trying to resize them to smaller, nothing fancy at all. Can't even open and do one without getting the scratch disk full error - but it's not full when I look at my C:/ drive (even in PS when I check the scratch disks under Preferences you can see the multiple gigs free).
    Help anyone?
    Thanks!
    C

    The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open.  I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
    As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS.  I also have 16 GB of RAM installed.
    Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

  • Disk full error, but not even close!!  Please help.

    I recently moved my I-Tunes music folder to an external hardrive on my network. Everything has been functioning great, but when I tried to make a purchase from the Itunes store today, I get the following message when trying to donload:
    **The disk you are attmpting to use is full**
    However, my preferences show the new location, which has over 150 GB available. I have not had any trouble adding to my library from other sources. My laptop has over 14 GB available, same as my Ipod. I cannot see where the source of the problem is. I have tried:
    *restarting Itunes
    *restarting my machine
    *repairing my disk permissions (based on another thread)
    None of these have eliminated the message and allowed download. Suggestions would be greatly appreciated.
    PowerBook G4 Mac OS X (10.4.8) Itunes 7.0.1

    I don't understand it either, and I didn't study the problem at all after I got it working. I've read accounts of people experiencing this with varying amounts of space available, so I'm pretty sure it isn't directly related to the exact amount leftover (maybe it has to be above a threshold for the problem to occur at all...). Also, 200GB, while a nice even number in decimal form, isn't anything special in two's complement binary.
    I'll assume that you are using the most current version of iTunes (7.0.2 I believe), so this confirms that the problem has not been repaired since I experienced it (7.0). So it is a lingering bug. I did experience the same oddness where I could download podcasts, but it was failing with videos. At the time I assumed it had to do with some arbitrary limit, and that the podcasts were small enough to remain under it. Now, I think it has to do with some state that is stuck in iTunes, and gets reset when something happens with the volume's filesystem.
    Anyway, if following the above linked advice doesn't help in your situation, I'm at a loss for what else to try. I guess rebuilding your library may be worth a try. On a few occasions I've had to run "consolidate library". You could try that (if you are using the option to organize your files). It won't damage any of your settings.
    On your last point, absolutely correct. Sorry about that, but that's my point of view.
    Good luck.
    Chris

  • Can't transfer 5GB file from PC 2 iPod -disk full error but 12GB available?

    iPod has 6+ GB w/ almost 13GB available space.
    Every time i initiate the file transfer to iPOD from PC, PC says disk is full, please retry. Yet when I check properties of iPod on PC, it shows the same quantity of available space above.
    I've reformatted ipod to windows. Since I have a mac @ home, it was originally apple format out of box.
    Could there be a file size limitation? I seem to be able to write smaller sized files (e.g. 600 MB) w/ no problem.
    PC at office is Windows XP Profession Version 2002 SP1, Internet Explorer 6.
    iMac 17inch Flat Panel   Mac OS X (10.4.5)   iPod U2 edition 20GB
    I also have enabled hard disk use on the iPod.
    Message was edited by: azhar

    If you use your iPod as a hard disk with a Windows PC, the FAT32 file system can only accommodate files that are smaller than 4 gigabytes. No matter how much free space there is on your iPod, you can't copy files that are larger than that.

  • "Disk Full" error when disk is not full

    I am starting to receive repeated situations where the OS reports that my disk is full, and any or all disks are also reported full...
    I have emptied my trash, cleared all caches, deleted all logs, removed Apps I don't use (and their data in the Library's Application Support area), every language other than the various flavors of English, and I am still receiving this error.
    I have 35 gigs of 148 free on my startup disk, 342 of 465 free on a secondary drive, and when I try Flash drives or drives from a mounted server they also are reported as full.
    This sure looks like a OS X 10.4.11 (my OS version) bug to me...
    Note, I have to use 10.4.11 because the OpenGL drivers on 10.5 are troublesome for my application development needs. (I write 3D graphics code on this machine.)
    Any clues anyone?

    How large in MB or GB is this 66 page document?
    Look at these links.
    Where did my disk space go?
    http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=770243
    Download & use WhatSize described in this link or Disk Inventory X @ http://www.derlien.com/
    Freeing space on your Mac OS X startup disk
    http://www.thexlab.com/faqs/freeingspace.html
    Amazing Disappearing Drive Space
    http://www.pinkmutant.com/articles/TigerMisc.html
    Increase HD Free Space
    http://macosx.com/forums/howto-faqs/275191-how-easily-increase-hd free-space-laptop.html
    How to free up my disk space
    http://www.macmaps.com/diskfull.html
     Cheers, Tom

  • Full charge but still shows only 4 hours

    I had fully charged the laptop till 100%
    I am now running on battery and it shows time remaining only 4 hours
    why?

    First of all which macbook pro are you using? And secondly the time remaining is based on whatever you currently doing with your computer at that time. For example if you are running a CPU intensive app, have the display brightness at max and browsing the net then the time remaining will be less than what apple says. However, if you dim the display, quit all applications and turn the airport off, you will notice a great improvement in the time remaining.
    Steve

  • I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.

    I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box.  But hours later, I am still getting a disk full error and all of the memory has disappeared.  I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
    In checking the log files, here is the message repeated over and over....
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file'
    Jul  4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache.  SQLite error code:21, 'unable to open database file' with userInfo = {
                  NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
                  NSSQLiteErrorDomain = 21;
    Jul  4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
    Jul  4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    Jul  4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
    Jul  4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
    Any ideas on what to do next?
    I'm running and iMac 20-inch  early 2009
    Processor  2.66 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400 256 MB
    Software  OS X 10.8.4 (12E55)

    Step 1
    Quit Calendar. Triple-click the line below to select it:
    ~/Library/Calendars/Calendar Cache
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    Step 2
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
    iPhoto ▹ Empty Trash
    Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • What do i need to do when i get a startup disk full error?

    What do i need to do when i get a startup disk full error?  I can't update software or use my MacAir at all.

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • Shutdown while startup, disk full error on verbose

    i have a mac book pro when starting , the gray screen appears, later the apple and 10 seconds later aprox, turn off
    i try verbose mode and after turn off i can see a message “Disk full error"
    Operating system: OSX 10.9
    322MB FREE OF 300GB .. (my girlfriend is a graphic designer and does not pay any attention to alerts ..)
    I prove, smc reset, 2 chime sound test, safe mode (turn off too).
    performing tests were:
    1. Launch the recovery console ( from bootable usb osx mavericks) ,
    a. i probe unmount the volume Macintosh HD, not possible, because, its in use.
    a. verify disk ( Macintosh HD) , "the disk needs to be repair"
    b . repair disk ( Macintosh HD) , Keys out of order , ... Utility cant repair disk , and restore your backed -up files
    c . Check disk (320gb toshiba ..) , the partition map need to be repaired , because ... Problem with the EFI system partitions
    d . repair disk (320gb toshiba ..) , but ... when repair , try with Recovery HD, and works fine (not Macintosh HD)
    After that, the disc automatically unmounts and its not possible mount again (from terminal said "mount: /dev/disk0s2: unknow special file of file system")
    2 . Probe I start with a recovery console (local disk)
    same results (on repair 320gb toshiba.. the first time i run it, said "can’t perform live”, after that, same result like point 1
    3. restart, with recovery console (local disk)
    a. launch terminal and try to delete manually , go to /dev/disk0s2 (/Volumes/Macintosh HD) and can browse the disk  (ex /Users/xxxx/Desktop), but when tried rm, appears “Read-Only File System"
    4. Remove the HD from mac and put it on case, when i connect it via USB to another mac book pro, the OS, saids “can’t recognize the disk, initialize, ignore, eject)
    it is possible unmount the volume and remount like read-write from recovery console?
    is it possible to access the data in read-write mode for any way to delete some huge files?
    its the only solution mount and external disk and make and tedious scp from Terminal???, if its possible
    regards, sorry for my bad English
    Dario

    There are lots of hidden directories. There could be actual data instead of alias mount points under "/Volumes" which is often one reason.
    There are a couple programs to show where space is going, as well as sort output from terminal, but I prefer OmniGroup OmniDiskSweeper - look on MacUpdate - to show and access files. Program works fine even though shareware.
    And yes, you might want to use the Raptor? for something else and get even WD 640GB for $75, or the 3rd gen VelociRaptor 300GB $289.
    There are threads in "Using Leopard" regularly about "where did my space go."

  • Adobe Photoshop Scratch Disk Full/Startup Disk Full error - PLEASE HELP

    Dear ALL,
    I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message. Never happended before.
    Since my initial post I downloaded Macaroni (utility) and have run the daily/weekly/monthly backups, checked the /private/var/vm and /private/var/log and /Volumes. Nothing unusual there...
    When I started getting this error I had 32GB left on a looked at my HD and I seem to have 32GB available on a 152GB drive. Now after deleting I have 76GB capacity left.
    But when I tried to open a Photoshop PSD or TIFF file and do a crop I still get tge Startup Disk is Full error followed by the Adobe Photoshop error Scratch Disk is Full.
    I am thinking of running the Disk Utility from the Applications/Utilities/Disk Utility and doing a Verify Disk and Verify Disk Permissions followed by Repair Disk Permissions. I will be logged into the machine whilst doing this. Is there any danger in this as I have read elsewhere that I need to do this from a bootable volume. If that is the case how do I create a bootable disk/cd? If not then what is the cure to my Disk Full as surely there is now nearly 50% FREE!!!!!
    Please help.
    Max

    PS will always use the boot disk for scratch to some extent even with an alternate primary scratch disk.
    Be sure to turn off Spotlight as it causes problems.
    4GB of RAM would be nice, I understand small files don't work well if there is more than 4GB RAM but large files will. OS X uses free RAM as cache and RAM disk before using disk drives.
    How much RAM is allocated to PS? More RAM would help.
    A dedicated lean boot drive helps. Install just what is needed for your work, use a separate drive for data, and yet another RAID volume for scratch.
    When in doubt, backup with SuperDuper, and do an erase and then restore. Always backup before repairing; and never, ever, use an old version of Tiger CD/DVD - like 10.4.2 on 10.4.7/.8. Use "fsck" instead, or your emergency boot drive.
    Also, give Applejack a shot and delete the cache folders and swap files from time to time to keep a system humming. CS/CS2 and Tiger benefit nicely from more RAM.

  • Startup Disk Full Error - Please help

    Dear ALL,
    I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message.
    I have no clue as to how to correctly fix this issue. I looked at my HD and I seem to have 32GB available, which I would have thought would have been ample space. I have started to remove unwanted files and backup to CD large image files. So this should free up some more space. The question is will this be enough to get rid of this issue and is it associated with the amount of HD space on my drive? or would I need to run some script etc? or download/buy some other product to fix this?
    Your help is greatly appreciated.
    Max

    OK I tried Macaroni...and when I tried to work with a TIFF file I get the same Startup Disk is FULL message. The I get an adobe message saying Scratch Disk is FULL.
    Any further suggestions would be appreciated.

  • Can't open the Illustration. Can't print the illustration. Disk full error . . .

    Since CS5, now CS5.1 I have had periods, sometimes multiple times a day, that I have this error, "Can't open Illustration. Can't print the illustration. Disk full error has occured while printing."
    I don't understand if I am alone in the problem or what. But after 3 days of the problem starting up again, I am quickly going nuts - I was close to that point before these issues.
    Facts:
    It happens without warning! These are native illustrator files that I created or have been given to me.
    I am NOT printing when it happens.
    I cannot open ANY illustrator file once the error occurs.
    If I quit Illustrator and re-open, it still does NOT work.
    I have to restart my entire computer, then it works fne - until it happens again, which is 5-6 times a day.
    I am running 10.6.8  on a 2.9 Core 2 Duo 24" iMac with 4GB ram.
    Doe anyone have any idea what the problem is or how to fix it? Please!!!!!

    Probably a font cache, corrupt font and now a preference corruption as well.
    Bloated font cache an do this.
    So can a permission problem
    So download ONYX it is free clear out your font cache, if you have cocktail that will do as well. As mfar as the corrut font Font Agent Pro would be useful for helping you locate the  corrupt font.
    As for the preferences
    1. Quit Illustrator.
    2.Go to User/username/Library/Preferences/ Adobe illustrator CS# Settings and trash the settings folder, the whole folder not just the contents of the folder..
    3. Start Illustrator. Illustrator creates a new preferences file.
    (someone here will advice you to rename the folder but that only applies to the Windows system just trash and empty the trash and a fresh one will be made)
    Then use the disk Utility to repair the permissions.
    You can do all of thesee and maybe avoid the corrupt font and see if that works but I suggest you do all three and then if it happens again trouble shoot your fonts.
    If this does not help probably a conflict with a plug in or other third party software.

  • IMac won't restart, "Disk full error"

    Shuts down soon after Apple, status wheel and status bar appear during startup. Tried safe mode, etc. and got "disk full error." "Could not be repaired."

    I think the store appointment would be safest.
    Of course, it's unix.
    You need to get into single use mode for steps one and two that are listed below.
    This page will tell you how to get into single user mode.
    http://support.apple.com/kb/HT1492
    Basically, you hold down the command-s key then  powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
    # Type the follow two instructions to access the startup disk in read/write:
    # ( in case of partial success repeat this command until errors go away. )
    /sbin/fsck -fy
    /sbin/mount -uw /
    the delete command is rm. note the file is gone. there is not recovery beside backup
    man rm
    for cryptic details
    "mac $" is the prompt yours will be different.  Do these commands first. mac is my short user name. I do not thing the whoami command will give you your short user name . you will have to know or guess.
    mac $ ls /Users
    Deleted Users/ compile/       macLimited/    na copy/       standard/      t2-org/
    Shared/        ftp/           macPanels/     na-old/        startup/       textw/
    a (Deleted)/   mac/           mysidekick/    seeker/        student/
    mac $ ls /Users/mac/Documents/
    ALDL Getting Started Guide.doc
    AccordianFinalColorSmall copy.jpg
    ... files clipped ...
    Here is an overview of the terminal commands.  Lets assume that your account has a short user name of mac.
    #What is my short user name?  Type the whoami command.
    mac $ whoami
    mac
    mac $
    #How to list all of your disks.
    # The ls command is for list
    mac $ ls /Volumes/
    Audio CD       Macintosh-HD   Spotless       Tiger-ext
    mac $
      # Let's say your flash drive is named Spotless
    # cd is change directory
    mac $ cd /Volumes/Spotless
    # pwd is print working directory
    mac $ pwd
    /Volumes/Spotless
    mac $
      # The ls command is for list # l is long # F is type of file where / is directory mac $ ls -lF
    total 134704
    -rw-r--r--     1 mac  staff     64560 Mar  3  2009 A-picture-of-Youpi-key.png
    drwxr-xr-x    83 mac  staff      2822 Nov  7 14:52 Applescript files/
    drwxrwxrwx    12 mac  staff       408 Dec 13  2008 Christmas Cards/
    drwxr-xr-x     9 mac  staff       306 Dec 21 17:39 Christmas Cards 2009/
    ... trimmed ... What does all this mean?
    drwxrwxrwx
    d = directory
    r = read
    w = write
    x = executeable program
    drwxrwxrwx
    |  |  |
    |  |   all other users not in first two types
    |  | 
    |  group

    owner 
    Every Unix resource: files, folders, etc has an owner, group, other 
    a file has one owner.
    a file has one group.  A group contains a list of users.
    To gain access to a file.  You can be the owner, in the group, or not being the owner or in the group you ended up as other. Each of these categories has read, write, or execute permissions.
    # l is long
    # a is all to show hidden files & folders
    mac $ ls -lFa
    total 134736
    drwxr-xr-x    41 mac   staff      1496 Dec 22 17:11 .
    drwxrwxrwt     8 root  admin       272 Dec 24 13:55 ..
    -rwxrwxrwx     1 mac   staff     15364 Dec 23 12:52 .DS_Store*
    drwx------     4 mac   staff       136 Jan 22  2009 .Spotlight-V100
    drwxrwxrwt     5 mac   staff       170 Sep 14 16:36 .TemporaryItems
    d-wx-wx-wx     4 mac   staff       136 Dec 31  1969 .Trashes
    -rw-r--r--     1 mac  staff     64560 Mar  3  2009 A-picture-of-Youpi-key.png
    drwxr-xr-x    83 mac   staff      2822 Nov  7 14:52 Applescript files
    drwxrwxrwx    12 mac   staff       408 Dec 13  2008 Christmas Cards
    drwxr-xr-x     9 mac   staff       306 Dec 21 17:39 Christmas Cards 2009
    ... trimmed ...
    # mv is move or rename
    mv -i the-name the-new-name
    # You can just rename the file back to what it was with mv command.
    mv -i old-name new-name
    Here is what these commands mean:
    cd is change directory
    pwd is a print working directory
    ls is list
    sudo is Super user do
    mv is move or rename
    For cryptic comments, you can always uses the manual command which is man. For example:
    man mv 
    # Type the letter q to quit.
    In case you have spaces in your filenames or directories, you need to escape them. See examples: 
    mac $ ls -l ~/"see it"
    -rw-r--r-- 1 mac staff 3171 Oct 26 23:38 /Users/mac/see it
    mac $
    mac $ cd /Users/mac/Desktop/ttt\ html\ copy/
    Do you know about tabing? Type in a few letters of a name then press the tab key. The computer will type out the rest of the name if it is unique.
    Press the up arrow key to see the previous command(s).
    To edit a command, use the left arror key to more left and the right arror key to move right.  Use the delete key to delete the key to the left.  Type a letter to insert.
    history to see many previous commands. 
    mac $ history
        2  man launchd.conf
        3  history
    http://discussions.apple.com/thread.jspa?threadID=2692161&tstart=0 
    press the return key after every command.

  • Disk full error message?

    stuff, this site has issues.
    Okay, what I need to know is why I am getting a "disk full" error message when I try to save photos. This has only started to happen and my disk drives have plenty of space left on them.

    Thanks, but what is the Scratch disk set?
    Regards,
    Gordon Johnson
    m: Silkrooster [email protected]
    Sent: Monday, 15 July 2013 2:55 PM
    To: GKJohnson
    Subject: disk full error message?
    Re: disk full error message?
    created by Silkrooster <http://forums.adobe.com/people/Silkrooster>  in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5505558#5505558

  • Hopeless disk-full error of my 5800 XpressMusic

    Dear Nokia,
    I'm using my 5800 XpressMusic for quite a long time a I like it for many things: long battery life, ergonomics, etc. 
    There is one terrible bug though that spoils the pleasure. I'm constantly getting "disk full" error. 
    I have read all forums/discussions/advises about the problem. I have cleaned up the browser cash and the cash of all other applications. The firm fact is that all the files (including hidden ones) in my C drive occupy about 20percent of its size but the disk is full. 
    Yes, I know that if do the hard reset, it will help. BUT I JUST DON"T WANT! Last time I did it, it took me hours because the new firmware would not want to install or something.
    It is an obvious bug of the file system. Why, dear Nokia, are you making updates of the firmware with new graphical features and (sure everyone needs it) dynamic scrolling WITHOUT FIXING THIS BUG? Can you at least make an app that would recover the lost space?
    Is it not a proper message for discussion forums? Probably! But there is no support anymore to contact. All "contact support"  links end up here. You are not trying to help your customers with their problems, you invite to discuss them. How nice!
    Could you please give some response to the issue? So far i've only seen reports of desperate users trying to fix the problem.

    Hello, w00dman. Welcome to the Nokia Support Discussions!
    We are sorry to hear this. You may try the below fixes:
    Close some applications and try again
    In this case there are too many applications active at the same time. The problem can be fixed by closing some of the applications:
    Long press the Menu key to see the list of active applications.
    Select the applications which are not needed and close them.
    If this doesn't help, switch off and restart the phone.
    Delete or remove some data from C: Phone memory
    The phone notifies you if the phone memory or memory card free space is getting low. There can be different error messages shown this situation, for example:
    "Memory Full: Delete or remove some data from C: Phone memory"
    "Disk Full : Automatic retrieval of mailbox for exchange disabled"
    Free your Phone memory
    Transfer some data to the memory card with the File mgr application (select Menu > Applications > File mgr.). Select or mark files to be moved, select Options > Organise > Move to folder and then the destination folder.
    In order to free memory, you could also remove or move the following items:
    Messages from Inbox, Drafts and Sent folders in Messaging.
    Define a shorter sync period in Mail settings to remove retrieved e-mails.
    Clear the web browser cache to free some memory (select Options > Clear privacy data > Cache). 
    Saved images, videos, or sound files.
    Contact information.
    Calendar notes.
    Downloaded application packages.
    If there are applications which are not needed any more, uninstall them (select Menu > Settings > Data mgr. > App.mgr. > Installed apps.).
    Any other data that you no longer need.
    Use the memory card in the Camera application (select Options > Settings > Memory in use to define the memory where the images are stored). Or copy images and video clips to your PC with Nokia Suite. 
    Let us know how it will go. 

Maybe you are looking for

  • How do I quickly change writing direction in mail?

    How do I quickly change writing direction in mail without going trough 7 different menu options? Is there a quick keyboard shortcut, or maybe an icon I can add to the mail bar? Thank you. Dan

  • Directory services and windows 2003

    hello all i am new to the world of solaris. So the trouble is that we have a sunfire and i installed directory services 5.2 but windows 2003 refuse to join the domain at all... the sunfire box is in nat and there's an entry in the nat dns server. the

  • Help!!! i cant install oracle8i in windows2000 professional!

    To the oracle, im having some problem installing oracle 8i in my pc. my pc is running with pentiumIII processor, with 384mb of ram, i still have 16Gb free hard disk space, and running windows 2000 proffesional. during installation, after you click ne

  • Flash file not running on preview

    But it will run when I click the play button in Dreamweaver... But the site will not load or run the swf file....

  • What happen to display album art?

    This is going out to APPL! I'm a coder, been one for 30+ years! Put back the display album art! It can't be that hard! I know you dudes can do a classic view or something like that. Michael B's two cents