Startup disk full won't get past log on screen

I got the error message that my startup disk is full. I tried to turn off the computer and turn it back on but now on startup it wont let me past the password screen.
It just sits at the blank galaxy screen. Any ideas?

What os are you using?

Similar Messages

Can not get past log on screen

I am having trouble logging on to our macbook when it boots up a window comes up log in unsuccessful error has occured. I have tried starting up in safe mode and resetting power management.
Help please???

Thanks, Andrew for your help. Not sure if you will see this, but I did the above and it said the HD was okay. Rebooted it and still won't go past login page. Tried it again and this time typed in the line /sbin/fsck -fy and then it came up and said HD was okay, but said something about being modified. I once more rebooted, but it still won't get past the login screen. Besides taking long to reboot, as before, I am able to enter my password, but then it hangs up with the rainbow icon rotating continuously. Does this mean that the disk is corrupt or partially so, and if so, can you advise how I should proceed? TIA again.

Pavilion p6-2117 won't get past the splash screen with a parallel card installed.

Pavilion p6-2117c won't get past the splash screen with a pci express parallel card installed. I take the card out and the machine works just fine. The screen says press "esc" for startup menu but nothing happens.
This question was solved.
View Solution.

Take a careful look at the slot and see if any of the pins are broken or smashed to the bottom of the slot. Do you have another pci slot to try or just the one?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

My iMac starts, but won't get past the loading screen?

My iMac starts up, but won't even get past the white screen with the Apple logo.
It kept giving me black screens, and would not start in safety mode. After command + option + p + r, the black screens stopped coming, but it still won't get past the loading screen, if I let it load long enough the Apple logo is replaced by a "denied" symbol but that is the only thing that happens. By hitting command + d, I was told nothing is wrong. When pressing command + r and going to disk utility, it found an issue while verifying and repairing. At first it stated "invalid journal" but now it only says to reinstall everything and that the problem couldn't be solved. I cannot mount the harddrive, and Time Machine just searches for copies without getting anywhere. When I try installing OS X (Mavericks) again, the harddrive doesn't even show up. What do I do?

The HD sounds like it has crashed, take it into your local Apple Store or Apple Authorized Service Provider (AASP), if you bought AppleCare this will be covered. If you don't have an Apple Store in your area and don't know of any AASPs then please click https://locate.apple.com/country to begin finding one.

Computer won't get past the blue screen...

During class today I decide to install new updates to my computer, but class ended before everything had downloaded so I just closed the screen thinking nothing of it. Now my computer won't get past the blue screen and it just keeps reloading and reloading. Help?

You must have damaged your OS installation by putting the machine to sleep at the wrong moment. To fix that, you need to reinstall, but first you need to back up your data, if you haven't already done so. Have you?

My iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

Apple's activation server is down.
I called Apple and the support team had the same issue.
All you can do is be patient.

My emac won't get past the grey screen with spinning indicator

before i went to bed last nite it was fine. when i woke up i click on the screen and got the little rainbow ball. that lasted for about 5-10 minutes so i had to push the button. when i try to turn it on now it gets to the grey screen with the spinning indicator but won't get past that. any help would be appreciated

An Archive and Install will preserve you user settings and data. You will need a minimum of 5 GB free on the hard drive to perform an A&I; you can reduce the space required by about 1 GB by selecting the option to install language support only for the language you use (assuming you don't need multiple languages).
However, after seeing your other post (BTW, it'll be easier to keep track if relted issues are in the same thread), you do not want to try an A&I if Disk Utility is reporting anything about 'could not be repaired'. Doing so will would ensure problems down the road, if it worked at all. It's possible for one disk problem to mask another. Whenever Disk Utility (or any other repair utility) reports making repairs, it's good practice to repeat the repair until it reports no problems found or it becomes clear it cannot repair the disk.
DiskWarrior has an excellent track record at repairing problems that Disk Utility cannot (especially Disk Utility versions prior to OS X 10.4.2).
If the drive cannot be repaired, you may be able to keep it by doing an erase install with the write zeros (one pass) option. That will update the hard drive firmware record of bad disk sectors to avoid using. If there are only a few bad sectors, that may let you keep using the hard drive for several more years. An erase install will do just that to your data, through. If you have access to another Mac with either a large amount of free disk space of a DVD burner, you can try using the other Mac as host and the eMac as target in FireWire target disk mode. You can run the host's copy of Disk Utility on the eMac hard drive, and hopefully be able to mount the emac HD so that you can back up the data in your Home directory.

L305d-s5934 Won't get past "please wait screen"

My l305d-s5934 started ranodmly shutting off recently. It is only a year and a half old so I figured it was getting too hot. About a week and a half ago it started getting stuck at the Windows "please wait" screen. I have been forced to power off with the power button. I tried startup repair and system restore. Now the only way I can boot completely is in safe mode. It won't get past that screen. When I try to restore now, it shuts off halfway through. Is this just the lifespan of this particular machine, or is there something I can do? Thanks for any help.

sounds like an OS issue to me..but have youu tried disabling all startup items, disconnect all usb devices and check it again. If there will be no changes then consider running an OS reinstall.
=========================================================
the only easy day was yesterday.....
=========================================================

Treo 800w (Sprint) Won't Get Past Windows Mobile Screen

I've tried everything I can think of, soft reset just gets me to the Windows Mobile screen, won't get past that. Battery has a full charge, at least according to the status light. Kind of dead in the water. Any ideas? Appreciate any help that's offered, thanks.
Post relates to: Treo 800w (Sprint)

Hello!
Hmmmm stuck on the load screen eh, stuck on the green screen? If the soft reset, taking the battery out for a few sec and back in, does not work then the hard reset is the next option. Unfortunately Windows Mobile does not have a safe mode like the ones found on PalmOS devices. Unfortunately the hard reset will erase all data but that would not be an issue if you have been syncing the phone or using Sprite Backup provided on the ROM.
Post relates to: Treo 650 (Unlocked GSM)

New Graphics Card won't get past HP splash screen.

A customer bought in an Hp Pavilion P6755a, well out of warrenty with a failing graphics card. The customer does a lot of gaming so we sugested they repalce the3 graphics card, and get something a bit more powerfull at the sametime. We settled on an Gigabyte GTX 750TI, as it has resonable power at a low price, but more importanly it doesnt require extra power.
Popped in the new card, but the computer won't get past the HP splash screen, can't enter the BOIS either.
Trouble shooting I have already tried
*Installed a differnt card (GTX 230) which worked fine
*Tried the GTX750Ti in another computer to check it wasn't faulty (The other computer was even older than this one by several years)
*Tried a more powerfull PSU (it worked fine in a another computer with only a 300W PSU)
Any help would be greatly appreciated.

Hello @RileyNZL,
I understand that when you install the GeForce GTX 750 Ti graphics card in your HP Pavilion p6755a Desktop PC it will not boot up. The reason for this is because your motherboard only supports PCI Express 1.0 and the graphics card is a PCI Express 3.0. Theoretically, the card should work, but there is a break in the support chain at around PCI Express version 2.1 where PCI Express 1.0 is no longer compatible. I suspect that your other computer does not have PCI Express 1.0.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

MacBook Pro won't get past gray start screen - RunTime corruption error

Hi, I am a novice when it comes to fixing things, so I will make a Genius Bar appointment, but I thought I would consult this community first in case anyone has experienced this same issue:
I was using my 13 in. MacBook Pro this morning after not using it for a couple weeks. (It was running fine last time.) It started up fine, and the few applications I was using worked OK. Then I got an error saying I needed to update my Java in order to access my work VPN. I didn't think twice about downloading the Java upgrade. Once the Java download was complete, I thought I might need to restart to get the VPN to recognize the update. And that was the last time I was able to see my desktop. I restarted, and the could not get past the gray screen. I did this twice. Then I did a safe boot (showing the status of the progression), and that when I saw this message over and over and over:
hfs: RunTime corruption detected on MacIntosh HD, fsck will be forced on next mount.
hfs: BlockMarkFreeInternal () trying to free unallocated blocks (10865570,8) on volume MacIntosh HD
(I snapped a pic with my phone - that's how I transcribed it.)
This ran for about 20 minutes before I suspected it wasn't actually doing anything, and I forced it to shut down by pressing the power button.
I just tried to start it again (fingers crossed, hoping for a miracle), but no such luck. Does anyone have any ideas? Is all lost? Thank you in advance for any recommendations!
Jennifer

I should add that I don't know if the Java download is responsible - could just be a coincidence that it was the last thing I did/downloaded before restarting.

Built my first PC, won't get past the first screen :(

Took me 12 hours to do my first build (I know, took too long) and I was so happy at first once everything was done but that didn't last long unfortunately. :( I'm stuck at the first screen where it lists my PC components and it tells me to either press DEL or F11. Nothing works. It's as if my keyboard is not being recognized... which it does because it says "1 KBDs, 1 MICE etc." in that same screen.
Parts are:
* MSI Computer Corp. Motherboard North Bridge AMD 970 & South Bridge AMD SB950 Chipset ATX DDR3 800 AMD AM3+ Motherboards (970A-G46)
* AMD FD6300WMHKBOX FX-6300 6-Core Processor Black Edition
* PNY 8GB Kit (2 x 4GB) 8 Dual Channel Kit DDR3 1866 (PC3 15000) 240-Pin DDR3 SDRAM MD8192KD3-1866-X9
* ASUS HD7790-DC2OC-1GD5 Radeon HD7790 1GB GDDR5 128-bit, DVI-I/DVI-D/ HDMI/DP PCI-Express 3.0 CrossFire ready Graphic Card OC-selected 1075MHz core
* WD Blue 1 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache - WD10EZEX
Every single one of these parts is listed in that first screen where I'm stuck at so that means everything is working, right (i.e., not dead on arrival or I didn't damage anything)? I did a Google search and this guy here (can't post links so the URL is not formatted) ->overclock.net/t/1426196/all-new-custom-pc-wont-get-past-the-bios-setup-screen<- had the same problem as I was and he pretty much has the same parts as me and he fixed the problem by using a pair of RAM with a lower voltage.
On MSI's page, it says there that the motherboard that I'm using supports 1.5V of RAM and I just checked the manufacturer's page for the RAM that I'm using and my RAM is listed as using 1.65V... could this really be the problem? Should I go ahead and get new RAM or is there maybe something else?
I also removed the CMOS battery for 1 hour and then moved the jumper to positions 2 and 3 to short the pins and I still can't get past the first screen. I'm going to try using just one stick of RAM next and should I insert it in DIMM1 or DIMM2?
Thanks in advance!

Quote from: XFM on 11-November-13, 06:25:55
Get a stick of cheap 1.5V RAM and give it a try. Plenty of good quality cheap RAM out there. In this instance my meaning of cheap is "low price" not low quality.
To be honest I would suggest to just go ahead and get some Corsair RAM such as what you see in my signature below. That is one brand that seems to work good in just about any system built using MSI MB whether it be AMD or Intel.
Thanks! I just ordered these - http://www.amazon.com/dp/B003N8GVUY/
Cheapest Corsairs I could find with 1.5V
Quote from: XFM on 11-November-13, 06:25:55
Another question I forgot to ask is what is the brand and model of your power supply?
I'm using one from an old PC... this one - http://www.newegg.com/Product/Product.aspx?Item=N82E16817121037

Macbook won't get past grey apple screen

So my computer was being stupid so I had to manually shut it down. When I went to restart, it would never get past the grey screen with the apple logo. It didn't even get the spinning wheel thing. I don't have the discs for it, but I do have them for a white macbook (early 2008). I tried clearing the PRAM etc but to no avail, and instead of booting from the disc it seems to just do the exact same thing, only sometimes it turns off, back on, and does the same thing. When I started it holding cmd v it gave me stuff saying it couldn't find file (insert many file names here)
Help!

I went to the mac store and they told me it could be two things 1. need an archive update or 2. need a new hard drive. It ended up being the hard drive is shot. It seems many people are having this problem even though it hasn't been out for long, so if you are having trouble restarting it (error reading 0x7 or any error reading driver messages) you should take it to the mac store.

MacBook Pro won't get past the apple screen on startup

The laptop won't startup. I get to the Apple logo and a spinning gear. I've tried starting it 3 times with the same result.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Startup disk full, can't get in to delete files, help!

Help!
I got the 'startup disk almost full' message so I was deleting files to make space when my computer froze, so I turned it off, now it won't let me back in again.
I get the start up chime, then it gets stuck on the apple logo with the progress bar, then a no entry symbol.
I tried starting it in Safe Mode but still can't get in.
This is very very bad, right?
I Have been using time machine to back up but I'm not sure if my most recent photos of my boy starting school last week had been backed up yet or not... I've uploaded them to facebook and instagram and had emailed them to the grandparents so they won't be totally lost but still :/
Can anyone help or am I totally screwed?!
imac was was purchased in 2009 and I *think* the last update I did was to Yosemite..

Start up holding down Command + R and then go to DiskUtility and try repairing your disk from there. As a last resort, you may need to erase or even replace your Hard Drive, but try that first. If it is not booting from there the chances are pretty good that your Drive has died.
Pete

Startup disk full won't get past log on screen

Similar Messages

Maybe you are looking for