Startup errors: ORA-01078, LRM-00109

VM: Oracle Virtual  Box
Oracle Database installed: 12.1.0.2.0
OS: Oracle Linux 7
Problem:  When I try to start the oracle database in SQLPLUS, I get errors.  Please see 2 attached files.
Thanks for your help.

792311 wrote:
Thank you for your help.
I am getting the following error when I try to create PFILE:
CREATE PFILE must be done from sqlplus prompt & not from OS command line
We, you & I, don't know what actual ORACLE_SID is.
Is it DB12C, or 12cdb?
When was last time this DB successfully started?
What changed since then?

Similar Messages

  • ERROR:ORA-01078,LRM-00109

    HI all,
    I am stuck ,plz help me i have created new database on unix server,the problem is i am able to connect from TOAD & SQL*plus...but when i try using cmd prompt (Telnet), i am unable to connect ,it gives me the error..
    ORA-01078,LRM-00109..plz solve my issue...
    Thanks,
    MIKE...

    ORA-01078 indicates your database itself is not up. How is it that you can connect through TOAD to this database?
    but not getting ointo sql promt on serverwhat do you mean by this? Do you mind doing a copy-paste of your screen and posting here so that we have a better idea of what you are looking at?

  • Multiple Homes ORA-01078 LRM-00109

    Hi,
    i have three ORACLE_HOMEs with two databases at the same server in two homes which are named "stg" and "infra". Yes, it comes from an Oracle Collaboration Suite installation :-)
    After a restart of the server i'm facing the ORA-01078 LRM-00109 errors if i'm trying to start the infra-tier database.
    Because the stg-home is the main home, i have added the infra TNS and Listener informations to the stg-home Listener and TNSNames files.
    I'm using ONE Listener of the stg-tier.
    It's trying to use the stg-config files with the infra tier and it fails with the errors above:
    SQL> startup;
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file 'C:\OCS_ONEBOX\STG\DATABASE\INITIASDB.O
    RA'
    SQL> startup;
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file 'C:\OCS_ONEBOX\STG\DATABASE\INITIASDB.ORA'
    Should i try to create a initiasdb.ora in the stg-tier which points to the correct spfile of the infra tier or daoes it overwrite other files after the startup? Or how could i switch the homes for startup?
    My tnsnames and Listener entries seems to be okay. The stg-tier database startsup without problems.
    Thank you,
    Maurice

    Oh, i'm using WinXP SP2 and Oracle 9i.
    The data of the STG-tier (Remember: infra does not work with the errors):
    Listener:
    # LISTENER.ORA Network Configuration File: C:\ocs_onebox\stg\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cc10206)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\ocs_onebox\stg)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = Storage.world)
    (ORACLE_HOME = C:\ocs_onebox\stg)
    (SID_NAME = Storage)
    (SID_DESC =
    (GLOBAL_DBNAME = iasdb.cc10206.cckt_ac.comconsult.de)
    (ORACLE_HOME = C:\ocs_onebox\infra)
    (SID_NAME = iasdb)
    TNSNAMES:
    # TNSNAMES.ORA Network Configuration File: C:\ocs_onebox\stg\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    EXTPROC_CONNECTION_DATA.CCKT-AC.COMCONSULT.DE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    INST1_HTTP.CCKT-AC.COMCONSULT.DE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cc10206)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = SHARED)
    (SERVICE_NAME = MODOSE)
    (PRESENTATION = http://HRService)
    STORAGE.CCKT-AC.COMCONSULT.DE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cc10206)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SID = STORAGE)
    (SERVICE_NAME = Storage.world)
    IASDB.CCKT-AC.COMCONSULT.DE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cc10206)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = iasdb.cc10206.cckt_ac.comconsult.de)
    (SID = iasdb)
    )

  • ORA-01078 & LRM-00109 error help

    I have installed Oracle 11g x86_64 on to my laptop (OS - Fedora 13). On installing when I tried using the command "startup", it showed me the below error.
    $ sqlplus / as sysdba
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/home/kritu/app/kritu/product/11.2.0/dbhome_1/dbs/initorcl.ora'
    ***NOTE*** But the location doesn't have "initorcl.ora", but instead has got only "init.ora".
    Need support from anyone who can help me out in finding the solution to the problem. Thanks in advance.

    Hi;
    please check below notes:
    Database Startup Fails With Errors ORA-01078 And ORA-27046 Or Just ORA-01078 [ID 405847.1]
    LRM-00109 and ORA-01078 when Using DBCA after Modifying Creation Script Destination [ID 226709.1]
    Startup of an Oracle 9i, 10g, 11g Instance using SPFile or Init.ora Parameter File [ID 162491.1]
    Regard
    Helios

  • Startup DB, error ORA-01078

    Hi,
    I tried to startup the db but I receive erros.
    This is the operation I do:
    [oracle@server04 ~]$ sqlplus / as sysdba
    SQL*Plus: Release 11.1.0.6.0 - Production on Wed Apr 21 16:18:26 2010
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/u01/app/oracle/product/11.1.0/db_1/dbs/initRDBTest.ora'Whan can I solve?
    Thansk, bye bye.

    The second line means the mentioned file does not exist.
    Please make sure it exists.
    When running into an error please ALWAYS consult the online error messages manual, before asking for clarification.
    Sybrand Bakker
    Senior Oracle DBA

  • Hyperion startup error -ORA-12514, TNS:listener does not currently know of service requested in connect descriptor

    Hi All,
    While restarting the hyperion service we see this exception. Nothing was changed on the hyperion server. Checking with DB team if anything was change on their end.
    Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
            at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:283)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1310)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1227)
            at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:250)
            at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1330)
            Truncated. see log file for complete stacktrace
    We don't have oracle client on our end, so this is not a tnsnames issue. This is preventing all the hyperion services coming up.
    Thanks,

    The listener is up , the message is from the listener indicating the listener does not know of SID/SERVICE name that you are giving it. Manually connect to the db using sqldeveloper in order to make sure the parameters you are providing are working. Pay special attention to SID vs SERVICE_NAME. Then try to open config tool and go back to your database connection info. Reconfigure your database connection. It will likely you will find your connection error there. Also sometimes the config tool has trouble figuring out whether you mean SID or SERVICE_NAME. You can open advanced properties on the connection in configtool and specify / or : in the url.
    Java JDBC - How to connect to Oracle using Service Name instead of SID - Stack Overflow

  • OID startup error : ORA-4294967293

    I just installed 9iASv2 on my Suse 8 Linux system.
    After starting infrastucture, my infra services are down or unavailable.
    Startup scripts is :
    # Infrastucture
    $ORACLE_HOME/bin/lsnrctl start;
    $ORACLE_HOME/bin/oidmon start;
    $ORACLE_HOME/bin/oidctl server=oidldapd configset=0 instance=1 start;
    $ORACLE_HOME/bin/emctl start;
    $ORACLE_HOME/dcm/bin/dcmctl start -ct -ohs;
    $ORACLE_HOME/dcm/bin/dcmctl start -co OC4J_DAS;
    $ORACLE_HOME/bin/webcachectl start;
    # Midle Tier
    $ORACLE_HOME/dcm/bin/dcmctl start -ct ohs;
    $ORACLE_HOME/dcm/bin/dcmctl start -ct oc4j;
    $ORACLE_HOME/bin/webcachectl start;
    cd $ORACLE_HOME/discoverer902/util
    ./startall.sh
    cd $ORACLE_BASE
    $ORACLE_HOME/bin/rwserver.sh server=rep_my.server.com ;
    I get following messages in $ORACLE_HOME/ldap/log/oidmin.log :
    2002/07/12:09:58:40Starting Monitor Process, PID=8384
    2002/07/12:09:58:51Starting OIDLDAPD Server, PID=8535
    2002/07/12:09:58:51Updating Process Table...
    2002/07/12:09:58:51[gsldaa_AddEntry]: ORA-4294967293 while adding Entry cn=insta
    nce1,cn=osdldapd,cn=subregistrysubentry
    2002/07/12:09:58:51OIDLDAPD Instance 1 addition failed
    2002/07/12:09:58:51Server OIDLDAPD Instance 1 Terminated
    2002/07/12:09:58:51Deleting OIDLDAPD instance 1 from Process table
    2002/07/12:09:58:52[gslddd_DelCatEntry]: ORA-1578: ORA-01578: ORACLE data block
    corrupted (file # 19, block # 12)
    ORA-01110: data file 19: '/dysk1/product/infra9i/oradata/iasdb/giobjcl1_oid.dbf'
    2002/07/12:09:58:52gsldda_DeleteEntry:gslddd_DelCatEntry Error..1578
    Segment with corrupted block containing index ods.st_objectclass.
    I droped and re-created ods.st_objectclass.
    The problem is the same.
    Were is problem, any idea?

    Try my script that I wrote, for an article in oracle magazine,
    it works in a way tells you status of the componentsas well.
    Put it an a file chmod to allow execute ...
    I Don't see much wrong with your script except:
    1. I don't know about Linux, am solaris man.
    2. You need to connect=iasdb ie to an instance,
    3. Use opmn to start others or those did not start
    4. The order of start seems to be important as there is a bug relating that issue, see my posting to this forum.
    I have included the debug in the script as well.
    Hope this helps you and the others.
    Sunder Aswani (an Oracle & Portal DBA consultant in London)
    # Enter the shell type here. Trnsf. /opt/oracle for mid tier.
    # Script to start infra/portal on a single or with mid tier system
    # By Sunder Aswani (An oracle & Portal DBA consultant in London)
    # Version 1.0 dated 20th June 2002.
    $ORACLE_HOME/bin/oidctl connect=iasdb server=oidldapd instance=1 start
    $ORACLE_HOME/bin/oidctl connect=iasdb server=oidldapd instance=2 start
    $ORACLE_HOME/dcm/bin/dcmctl start -ct ohs
    $ORACLE_HOME/bin/oidmon start
    $ORACLE_HOME/dcm/bin/dcmctl start oc4j
    $ORACLE_HOME/opmn/bin/opmnctl startall
    $ORACLE_HOME/bin/emctl start
    /opt/oracle/portal/dcm/bin/dcmctl start -ct ohs
    /opt/oracle/portal/opmn/bin/opmnctl startall
    ps -ef|grep http
    $ORACLE_HOME/dcm/bin/dcmctl getstate -v
    $ORACLE_HOME/ldap/bin/ldapcheck
    ## Each of these processes will have an associated log. /Given the UNIX example:
    ## Process oidmon is Alive as PID 1035 -->oidmon.log (guardian process)
    ## Process oidldapd is Alive as PID 1051 -->oidldapd01.log (ldap dispatcher)
    ## Process oidldapd is Alive as PID 1043 -->oidldapd01s1043.log (ldap server)
    ## Not Running ---- Process oidrepld -->oidrepld01xxxx.log (if replication)
    ## $ORACLE_HOME/bin/odisrvreg -h sun.portal.com -p 4032 -D "cn=orcladmin" -w ias_admin1
    ## It is best to clean out the existing log files so we can view the results of your test. Please do
    the following:
    ## a. stop all oid processes
    ## b. repeat Step 1 until you no longer see the OID processes
    ## c. clean out all existing logfiles in the $ORACLE_HOME/ldap/log
    ## d. restart the oid processes with extended tracing...
    ## oidmon connect=<SID> start
    ## $ORACLE_HOME/bin/oidctl connect=<SID> server=oidldapd instance=1 flags=" -port <PORT> -host <HOST>
    -debug <DEBUG-LEVEL>" start
    ## $ORACLE_HOME/bin/oidctl connect=iasdb server=oidldapd instance=1 flags=" -port 4032 -h sun.portal.c
    om -debug 65535" start
    ##DEBUG-LEVELS for the oidctl command:
    ### 1 = Trace function calls
    ## 2 = Debug packet handling
    ### 4 = Heavy trace debugging
    ## 8 = Connection Management
    ## 16 = Print out packets sent and received
    ## 32 = Search filter processing
    ## 64 = Configuration file processsing
    ## 128 = Access control list processing
    ## 256 = Stats log connections/operations/results
    ## 512 = Stats log entries sent
    ## 1024 = Print communication with the back-end
    ## 2048 = Print entry parsing debugging
    ## 4096 = Schema-related debugging
    ##32768 = Replication Specific debugging
    ## Bind the ports as follows:
    $ORACLE_HOME/bin/ldapbind -h sun.portal.com -p 4032 -D cn=orcladmin -w ias_admin1
    webcachectl start
    ## /opt/oracle/portal/webcache/bin/webcachectl start (SHOULD say already running IF NO MID TIER)

  • SQL startup  Error:ORA-03113: end-of-file on communication channel

    Hello All,
    Oracle 11g 11.2.0.2 Expression Edition
    I made the number of processes to 1 by issuing the below command.
    SQL> alter system set processes = 1;
    SQL>shutdown immediateI am getting the below error when I issued startup command.
    SQL> startup;
    ORA-03113: end-of-file on communication channelalert log:
    Fri Dec 28 14:09:24 2012
    PMON started with pid=2, OS id=2984
    Fri Dec 28 14:09:24 2012
    PSP0 started with pid=3, OS id=5788
    Fri Dec 28 14:09:25 2012
    ORA-00020: No more process state objects available
    ORA-20 errors will not be written to the alert log for
    the next minute. Please look at trace files to see all
    the ORA-20 errors.
    Process GEN0 submission failed with error = 20
    USER (ospid: 4780): terminating the instance due to error 444
    Fri Dec 28 14:09:25 2012
    VKTM started with pid=4, OS id=1676 at elevated priority
    Instance terminated by USER, pid = 4780How to startup my database again?

    alert log:
    Starting up:
    Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
    Using parameter settings in server-side pfile C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DATABASE\INITXE.ORA
    System parameters with non-default values:
      processes                = 6
      sessions                 = 32
      spfile                   = "C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DBS\SPFILEXE.ORA"
      memory_target            = 1G
      control_files            = "C:\ORACLEXE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
      compatible               = "11.2.0.0.0"
      db_recovery_file_dest    = "C:\oraclexe\app\oracle\fast_recovery_area"
      db_recovery_file_dest_size= 10G
      undo_management          = "AUTO"
      undo_tablespace          = "UNDOTBS1"
      remote_login_passwordfile= "EXCLUSIVE"
      dispatchers              = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
      shared_servers           = 4
      job_queue_processes      = 4
      audit_file_dest          = "C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP"
      db_name                  = "XE"
      open_cursors             = 300
      diagnostic_dest          = "C:\ORACLEXE\APP\ORACLE"
    Fri Dec 28 14:06:59 2012
    PMON started with pid=2, OS id=2248
    Fri Dec 28 14:06:59 2012
    PSP0 started with pid=3, OS id=3700
    Fri Dec 28 14:07:00 2012
    VKTM started with pid=4, OS id=4492 at elevated priority
    Fri Dec 28 14:07:00 2012
    ORA-00020: No more process state objects available
    VKTM running at (10)millisec precision with DBRM quantum (100)ms
    ORA-20 errors will not be written to the alert log for
    the next minute. Please look at trace files to see all
    the ORA-20 errors.
    Process GEN0 submission failed with error = 20
    USER (ospid: 6076): terminating the instance due to error 444
    Instance terminated by USER, pid = 6076
    Fri Dec 28 14:09:07 2012
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 2
    Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =10
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up:
    Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
    Using parameter settings in server-side pfile C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DATABASE\INITXE.ORA
    System parameters with non-default values:
      processes                = 6
      sessions                 = 32
      spfile                   = "C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DBS\SPFILEXE.ORA"
      memory_target            = 1G
      control_files            = "C:\ORACLEXE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
      compatible               = "11.2.0.0.0"
      db_recovery_file_dest    = "C:\oraclexe\app\oracle\fast_recovery_area"
      db_recovery_file_dest_size= 10G
      undo_management          = "AUTO"
      undo_tablespace          = "UNDOTBS1"
      remote_login_passwordfile= "EXCLUSIVE"
      dispatchers              = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
      shared_servers           = 4
      job_queue_processes      = 4
      audit_file_dest          = "C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP"
      db_name                  = "XE"
      open_cursors             = 300
      diagnostic_dest          = "C:\ORACLEXE\APP\ORACLE"
    Fri Dec 28 14:09:24 2012
    PMON started with pid=2, OS id=2984
    Fri Dec 28 14:09:24 2012
    PSP0 started with pid=3, OS id=5788
    Fri Dec 28 14:09:25 2012
    ORA-00020: No more process state objects available
    ORA-20 errors will not be written to the alert log for
    the next minute. Please look at trace files to see all
    the ORA-20 errors.
    Process GEN0 submission failed with error = 20
    USER (ospid: 4780): terminating the instance due to error 444
    Fri Dec 28 14:09:25 2012
    VKTM started with pid=4, OS id=1676 at elevated priority
    Instance terminated by USER, pid = 4780pfile.ora
    xe.__db_cache_size=239075328
    xe.__java_pool_size=4194304
    xe.__large_pool_size=12582912
    xe.__oracle_base='C:\oraclexe\app\oracle'#ORACLE_BASE set from environment
    xe.__pga_aggregate_target=427819008
    xe.__sga_target=645922816
    xe.__shared_io_pool_size=75497472
    xe.__shared_pool_size=306184192
    xe.__streams_pool_size=0
    *.audit_file_dest='C:\oraclexe\app\oracle\admin\XE\adump'
    *.compatible='11.2.0.0.0'
    *.control_files='C:\oraclexe\app\oracle\oradata\XE\control.dbf'
    *.db_name='XE'
    *.DB_RECOVERY_FILE_DEST_SIZE=10G
    *.DB_RECOVERY_FILE_DEST='C:\oraclexe\app\oracle\fast_recovery_area'
    *.diagnostic_dest='C:\oraclexe\app\oracle\.'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=XEXDB)'
    *.job_queue_processes=4
    *.memory_target=1024M
    *.open_cursors=300
    *.processes=100
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sessions=80
    *.shared_servers=4
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'

  • Database Startup Error - Ora-00600 on Oracle 8.0 in Windows 2000

    While Installing I Am getting Error Message Ora-00600
    The Database is opened. But the user cannot connect to the database.
    While trying to connect the system shows the above error number. It also give SMON error.

    I think, I already know the answer from Oracle Support. Version 8.0 (Database) was never supported on WIN2000, only 8.0.6 client. Before starting an installation it's always a good idea to check the software and hardware requirements in the installation guide.

  • ORA-01078 and LRM-00109 error

    Hi,
    I have installed Oracle 11g on SUSE Linux 10 successfully.But i dont know whether the database is running or not.When i try to access "Oracle Enterprise Manager", it says that network problem. But however when i ping the system, its giving proper response.
    Secondly, when im trying to startup the database using SQL, it gives me the following errors:
    ORA-01078 : failure in processing system parameters
    LRM-00109 : could not open parameter file '/home/app/oracle/product/11.1.0/db_1/initsales.ora'
    where "sales" is my Oracle Database SID.
    Thirdly, can anyone please tell me how to check all oracle related services on linux?
    please help me in solving these issues.
    Thanks in advance.
    Regards,
    Abdul

    ORA-01078 : failure in processing system parameters
    LRM-00109 : could not open parameter file '/home/app/oracle/product/11.1.0/db_1/initsales.ora'
    $ORACLE_SID=SALES
    $export ORACLE_SID
    $ech $ORACLE_SID
    $sqlplus \nolog
    SQL> connect /as sysdba
    SQL> select name from v$database;
    Thirdly, can anyone please tell me how to check all oracle related services on linux?
    Check Listener:
    $lsnrctl status
    $ps -ef|grep tns
    Check Oracle Background Processes:
    $ps -ef|grep smon
    $ps -ef|grep ora_
    $ps -ef|grep oracle
    Regards,
    Sabdar Syed.

  • ORA-01078 at startup

    Hello guys,
    i am using an Centos 6.2 linux with installed oracle-xe. I have installed it from an rpm.
    I use always the default settings.
    After that i could start it normal and successful connect to apex.
    Now i want to create an database user.
    I connect as sysdba: sqlplus "sys as sysdba" and enter the password.
    The message: "Connect to an idle instance" comes.
    If i try: "CREATE USER HTS IDENTIFIED BY pw1;" the error ora-01034 occurred.
    If i try: "startup" the error ora-01078 and lrm-00109: could not open parameter file '/u01/app/oracle/prodcut/11.2.0/xe/dbs/initxe.ora' occurred.
    I have read a lot but i don't see the solution for my problem.
    Has anyone an idea?

    Hi;
    1. Centos is not certified platform
    2. For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database » Application Express which is XE dedicated forum site.
    Regard
    Helios

  • Ora 01078 error

    Hello Experts,
    I am getting the following error while try to start database. In the respective directory I am not able to find initorrcl.ora file.
    Please help. Its urgent fro my project/job.
    Error:
    startup nomount
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file \APP\US31998\PRODUCT\11.1.0\DB_1\DATABASE\INITORCL.ORA'

    The init.ora file actullay located in the *\app\US31998\product\11.1.0\db_1\srvm\admin* directory.
    I copied the same file and putting into the *\app\US31998\product\11.1.0\db_1\database* directory
    After I copied its saying the following errer while runnning the startup nomount command
    startup nomount
    ORA-01078: failure in processing system parameters
    ORA-00439: feature not enabled: Real Application Clusters
    -----------------------------------init.ora file---------------------------------------------------------------------------------------
    # $Header: init.ora 25-jul-01.18:03:38 rajayar Exp $
    # Copyright (c) 1991, 2001, Oracle Corporation. All rights reserved. */
    # Example INIT.ORA file
    # This file is provided by Oracle Corporation to help you customize
    # your RDBMS installation for your site. Important system parameters
    # are discussed, and example settings given.
    # Some parameter settings are generic to any size installation.
    # For parameters that require different values in different size
    # installations, three scenarios have been provided: SMALL, MEDIUM
    # and LARGE. Any parameter that needs to be tuned according to
    # installation size will have three settings, each one commented
    # according to installation size.
    # Use the following table to approximate the SGA size needed for the
    # three scenarious provided in this file:
    # -------Installation/Database Size------
    # SMALL MEDIUM LARGE
    # Block 2K 4500K 6800K 17000K
    # Size 4K 5500K 8800K 21000K
    # To set up a database that multiple instances will be using, use the
    # same file for all instance. Place all instance-specific parameters
    # at the end of the file using the <sid>.<parameter_name> = <value> syntax.
    # This way, when you change a public
    # parameter, it will automatically change on all instances. This is
    # necessary, since all instances must run with the same value for many
    # parameters. For example, if you choose to use private rollback segments,
    # these must be specified differently for each instance, but since all gc_*
    # parameters must be the same on all instances, they should be in one file.
    # INSTRUCTIONS: Edit this file and the other INIT files it calls for
    # your site, either by using the values provided here or by providing
    # your own.
    # replace "clustdb" with your database name
    db_name = clustdb
    compatible=9.0.0
    db_files = 1024 # INITIAL
    #INITIAL
    #db_files=80
    #SMALL
    #DB_files=400
    #MEDIUM
    #db_files=1000
    #LARGE
    control_files = ("\\.\clustdb_control1", "\\.\clustdb_control2")
    db_file_multiblock_read_count = 8 # INITIAL
    # db_file_multiblock_read_count = 8
    #SMALL
    #db_file_multiblock_read_count = 16
    #MEDIUM
    #db_file_multiblock_read_count = 32
    #LARGE
    #Datawarehouse
    db_block_size=8192
    # Transaction processing
    # db_block_size=4096
    open_cursors=300
    #Transaction processing
    #sort_area_size=524288
    #Datawarehouse
    sort_area_size=1048576
    large_pool_size=1048576 #Transaction processing, Datawarehouse
    db_cache_size=50331648 #Datawarehouse, Transaction processing
    java_pool_size=67108864 #Datawarehouse, Transaction processing
    # db_block_buffers = 200 # INITIAL
    # db_block_buffers=100 #SMALL
    # db_block_buffers =550 # MEDIUM
    # db_block_buffers=3200 #LARGE
    #shared_pool_size = 52428800 # INITIAL
    shared_pool_size = 67108864 # datewarehouse, transaction processing
    log_checkpoint_interval = 10000
    processes = 59 # INITIAL
    # processes = 50
    #SMALL
    #processes = 100
    #MEDIUM
    #processes = 200
    #LARGE
    parallel_max_servers = 5
    #SMALL
    # parallel_max_servers = 4 x (number of CPUs)
    #MEDIUM
    # parallel_max_servers = 4 x (number of CPUs)
    # LARGE
    log_buffer = 8192 # INITIAL
    #log_buffer = 8192
    #SMALL
    #log_buffer = 32768
    #MEDIUM
    #log_buffer = 163840
    #LARGE
    # audit_trail = true # if you want auditing
    # timed_statistics = true # if you want timed statistics
    max_dump_file_size = 10240 # limit trace file size to 10 K each
    # Uncommenting the line below will cause automatic archiving if archiving has
    # been enabled using ALTER DATABASE ARCHIVELOG.
    # log_archive_start = true
    # log_archive_dest = %ORACLE_HOME%/admin/clustdb/arch
    # log_archive_format = "%%ORACLE_SID%%T%TS%S.ARC"
    # If using private rollback segments, place lines of the following
    # form at the end of this file:
    # <sid>.rollback_segments = (name1, name2)
    # If using public rollback segments, define how many
    # rollback segments each instance will pick up, using the formula
    # # of rollback segments = transactions / transactions_per_rollback_segment
    # In this example each instance will grab 40/10 = 4:
    # transactions = 40
    # transactions_per_rollback_segment = 10
    # Global Naming -- enforce that a dblink has same name as the db it connects to
    global_names = TRUE
    # Edit and uncomment the following line to provide the suffix that will be
    # appended to the db_name parameter (separated with a dot) and stored as the
    # global database name when a database is created. If your site uses
    # Internet Domain names for e-mail, then the part of your e-mail address after
    # the '@' is a good candidate for this parameter value.
    # db_domain = us.acme.com # global database name is db_name.db_domain
    # Uncomment the following line if you wish to enable the Oracle Trace product
    # to trace server activity. This enables scheduling of server collections
    # from the Oracle Enterprise Manager Console.
    # Also, if the oracle_trace_collection_name parameter is non-null,
    # every session will write to the named collection, as well as enabling you
    # to schedule future collections from the console.
    # oracle_trace_enable = TRUE
    # define directories to store trace and alert files
    background_dump_dest=%ORACLE_HOME%/admin/clustdb/bdump
    user_dump_dest=%ORACLE_HOME%/admin/clustdb/
    db_block_size = 4096
    remote_login_passwordfile = exclusive
    # text_enable = TRUE
    # The following parameters are needed for the Advanced Replication Option
    job_queue_processes = 2
    # job_queue_processes = 4 #datawarehouse
    # job_queue_interval = 10
    # job_queue_keep_connections = false
    distributed_transactions = 5
    open_links = 4
    # The following parameters are instance-specific parameters that are
    # specified for two instances named clustdb1 and clustdb2
    undo_management=AUTO # For automatic undo management
    # = MANUAL For manual/RBS undo management
    cluster_database= true
    cluster_database_instances=2
    remote_listener=LISTENERS_CLUSTDB
    # First instance specific parameters
    clustdb1.thread=1
    clustdb1.instance_name=clustdb1
    clustdb1.instance_number=1
    clustdb1.local_listener=listener_clustdb1
    clustdb1.remote_login_passwordfile = exclusive
    # Comment out clustdb1.undo_tablespace and uncomment clustdb1.rollback_segments
    # when undo_management=MANUAL
    clustdb1.undo_tablespace = UNDOTBS1
    # clustdb1.rollback_segments = (rbs1_1,rbs1_2)
    # Second instance specific parameters
    clustdb2.thread=2
    clustdb2.instance_name = clustdb2
    clustdb2.instance_number = 2
    clustdb2.local_listener = listener_clustdb2
    clustdb2.remote_login_passwordfile = exclusive
    # Comment out clustdb2.undo_tablespace and uncomment clustdb2.rollback_segments
    # when undo_management=MANUAL
    clustdb2.undo_tablespace = UNDOTBS2
    # clustdb2.rollback_segments = (rbs2_1,rbs2_2)
    -----------------------------------init.ora file---------------------------------------------------------------------------------------

  • LRM -00109:could not open parameter file Oracle 10g in Solaris 10

    Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
    Connected to an idle instance.
    SQL> startup open;
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
    My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
    Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
    Thanks

    4joey1 wrote:
    Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
    Connected to an idle instance.
    SQL> startup open;
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
    My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
    By default, oracle will look first for a spfile named "spfile<ORACLE_SID>.ora". Lacking that, it will try to find "init<ORACLE_SID>).ora.
    Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
    Once you have started the db (I believe a startup nomount will be sufficient) you can issue CREATE SPFILE ... Details are in the fine SQL Reference manual found at tahiti.oracle.com
    BTW, "open" is the default behavior of "startup", so no need to specify it. A simple "startup" does the same thing.
    Thanks

  • Grid Erros ORA-01078: ORA-29701:

    Hi everyone.
    I'm currently install a second Grid Infrastructure in one server. The first one is a 11.2.0.1 and the second one is 11.2.0.3. on solaris 10. In the second installation I chose install grid infrastructure for standalone server. So, when a try to start the asm instance give me this errors:
    SQL> startup mount
    ORA-01078: failure in processing system parameters
    ORA-29701: unable to connect to Cluster Synchronization ServiceWhen I execute the code above, the first ASM instance is shutdown and the another database.
    I noticed that in the second installation the crsctl comman tool is not installed just crsctl.bin. All steps for installation went fine.
    So, can you advise me what I have to do to solve this? some documentation or something? please.
    thanks in advance.
    johnxjean

    Thanks onedbguru, the alert log file does not telling me nothing but i'll try with the /etc/init.d/init.ohasd.
    In other words, i want to be able to start asm either 11.2.0.1 or 11.2.0.3. The second one starts without any problem, after i shutdown 11.2.0.3 asm and trying startup asm 11.2.0.1 but fails. I dont know what i am doing wrong.
    Regards
    Johnxjean

  • ORA-01078: failure in processing system parameters LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'

    I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox). I have the users grid and oracle11g. Add groups and install grid infrastructure first as a grid user and install database as oracle user as in documentation successfully.
    I have following users and groups as
    [grid@orcl11g ~]$ id grid
       uid=501(grid) gid=502(oinstall) groups=502(oinstall),492(vboxsf),501(grid),503(dba),505(asmdba),506(asmadmin),507(asmoper)
    [grid@orcl11g ~]$ id oracle11g
       uid=500(oracle11g) gid=502(oinstall) groups=502(oinstall),500(oracle11g),492(vboxsf),503(dba),504(oper),505(asmdba)
    .bash_profile edited  for oracle11g user as
    "export TMP=/tmp
    export ORACLE_HOSTNAME=orcl11g
    export ORACLE_UNQNAME=ora11g
    export ORACLE_BASE=/u01/app/oracle
    export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
    export ORACLE_SID=ora11g
    export PATH=$PATH:$ORACLE_HOME/bin
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
    export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
    .bash_profile edited  for grid user as
    "export TMP=/tmp
    export ORACLE_HOSTNAME=orcl11g
    export ORACLE_UNQNAME=+ASM
    export ORACLE_BASE=/u01/app/grid
    export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/grid
    export GRID_HOME=$ORACLE_BASE/product/11.2.0/grid
    export ORACLE_SID=+ASM
    export PATH=$PATH:$ORACLE_HOME/bin
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
    export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
    When I log on as grid user. I check the followings:
    [grid@orcl11g ~]$ crsctl check has
    CRS-4638: Oracle High Availability Services is online
    [grid@orcl11g ~]$ srvctl status database -d ora11g
    Database is running.
    [grid@orcl11g ~]$ sqlplus sys as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:17:37 2014
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Automatic Storage Management option
    SQL> select status from v$instance;
    STATUS
    STARTED
    Till here everything seems to be OK!!!!
    When I log as  oracle user. I check the followings:
    [oracle11g@orcl11g ~]$ sqlplus sys as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:21:46 2014
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Enter password:
    Connected to an idle instance.
    SQL> select status from v$instance;
    select status from v$instance
    ERROR at line 1:
    ORA-01034: ORACLE not available
    Process ID: 0
    Session ID: 0 Serial number: 0
    SQL> startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'
    Also when I log on as a grid user again and use following commands to shutdown and start database again the STATUS of instance is again STARTED not OPEN.
    [grid@orcl11g ~]$ srvctl stop database -d ora11g -o normal
    [grid@orcl11g ~]$ srvctl start database -d ora11g
    And also when I edit /etc/oratab file. I change N to Y for +ASM. But when restart system it seems not changed value is N again.
        +ASM:/u01/app/grid/product/11.2.0/grid:N   # line added by Agent
         ora11g:/u01/app/oracle/product/11.2.0/dbhome_1:Y
    NOW QUESTIONS!!!!!
    1. Why I can't change the status of database to OPEN as grid user?
    2. The status is always STARTED when querying v$instance. İs it status of +ASM or database?
    3. When checking database as grid user it seems to be Database runnning...  If running why it is not in OPEN state? What is running means here?
    4. When I log on as oracle user and query v$instance, then error shown above occured. And also when startup  the database then another error occured as in above. WHY?
    5. When I edit /etc/oratab file manually why second row saved but the first one is changed after restart the system?
    6. Normally, which user have to start, stop or manage database? I think that oracle user is necessary for managing database and the grid user is only for managing ASM and Oracle Restart.
    PLEASE HELP ME TO SOLVE THIS CHAOTİC SİTUATİON!!!
    Thanks,
    DBA_84

    I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox)
    Pl identify exact version of 11gR2 to 4 decimal places. As noted in your other thread - Failed to start oracle-ohasd, error: Inappropriate ioctl for device ohasd failed to start at roothas.pl - you will need a minimum version of 11.2.0.3 for Linux 6.x - using a lower version may result in unexpected issues or problems.

Maybe you are looking for

  • Get All Groups from Weblogic

    Hello everyone, Well i'm having little problem to get all groups that exists in Weblogic. I already search but the only thing i can get is the groups from the user that is autenticated in the application. Best regards, Tiago Marques

  • ITunes won't sync correctly with external hard drive

    I have long kept my music on an external hard drive and had absolutely no problems with adding files to my iTunes library. Whenever I added songs to iTunes, they would automatically be copied over to my external device (a Seagate Freeagent 1TB USB Ex

  • My iphone 6 is not detected in itunes

    updated iTunes and updated iPhone, now iTunes will not detect my phone.

  • During job work order  PO number consumed

    I maked one jobwork order after saving that order,  one number is generate.. when i am going to open again in me22n screen. system give message that number is not available. i.e. number is skiped... why it is so.. please forward some solution ...

  • Play mov files on iPad?

    iPads supposedly play mov files.  However iTunes won't let them copy.  How can I get mov files to an iPad and then playthem?