Startup failed after update

I just updated my phone from nokia software updater and the computer told me it was successful etc.
But when i turned my phone back on again it asks me to put my pin in and then says 'Phone startup failed. Contact the retailer'.
Why won't it turn on!
I've taken my memory card out and taken the battery out and back in twice.

Just me, my phone is a 6110 navigator.

Similar Messages

BB Tour Fails after Update

Like others, I get the clock on white, then black screen of death, then more clock on white. The difference is, mine won't stop. It just keeps going and going and going. From what I can tell on the BlackBerry website, I need to pay someone to help me resolve the problem (????). Am I missing something?? PLEASE HELP!

Mine failed after update too. Device will not even turn on now and if I plug it into the usb the red light comes up but still no screen. tried taking out battery and replacing but still nothing...

Mobile connection fail after updating apple 4s to ios 6.1.3

Mobile connection fail after updating apple 4s to ios 6.1.3
intertnet and other online applications are not working after updating to apple iphone 4s to ios 6.1.3
what is the solution for this......

try resetting your network settings.
Settings.app -> General -> Reset - > Reset Network Settings
CMIIW

Nokia N96 RM-247 Start-up failed after update with...

Hi, i just installed nokia software updater and it updated my N96 from 12.XX to 20.50 and the phone was working fine for couple of hours then the battery gose off and when i conect it to a charger it displayed "Phone start-up Failed. Contact Retailer", and i went to the nokia care "Delta comunication" in Iraq-Baghdad and they blame my because i updated using NSU and they said that action made me out of the guarantee that should last for 1-Year and in this case they'll repair it for price...
after 2 days they reterned my mobile and said that it's un repairable and i had to trash it!!!!
so any hoped solution?
or i completely lost my new N96 #_#
Myth-X

usually when phone startup failed is displayed, this is due to the firmware update. after firmware updates it is always recommended to perform a hard reset (three-finger hard reset), that will delete everything off your phone memory, and give the phone a clean slte to work with. i have updated many a friends firmware and have noticed that everytime the phone acts buggy if you do not perform this hard reset. so do this reset, which involves holding the green call key, 3 key and * key all at the same time, then pressing the power button. make sure the device is turned off first of course though. i would recommend a backup of course, but you can't even get your phone to turn on so it is inevitable you will lose data.
let us know how it goes, hopefully your phone can be saved.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

[SOLVED] Network Manager systemd unit fails after update

EDIT: Reinstalling libnm-glib resolved this issue
After updating to the latest version of NetworkManager (networkmanager-0.9.8.10-3), the systemd unit fails to start. It works fine after downgrading back to the previous version though (networkmanager-0.9.8.10-1). I'm not sure if this is a bug or an error on my end; since the previous package works I've just dowgraded for the time being. For the update that doesn't work, here is the output of "systemctl status" and the systemd journal:
>>sudo systemctl daemon-reload
>> sudo systemctl status NetworkManager
● NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: failed (Result: exit-code) since Wed 2014-06-11 15:28:25 EDT; 10s ago
Process: 24073 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
Main PID: 24073 (code=exited, status=127)
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
>> journalctl -xn
-- Logs begin at Tue 2014-06-10 12:47:19 EDT, end at Wed 2014-06-11 15:28:36 EDT. --
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:25 kyle systemd[1]: Starting Network Manager...
-- Subject: Unit NetworkManager.service has begun with start-up
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has begun starting up.
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
-- Subject: Unit NetworkManager.service has failed
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has failed.
-- The result is failed.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session closed for user root
Jun 11 15:28:28 kyle dbus[489]: [system] Failed to activate service 'org.freedesktop.nm_dispatcher': timed out
Jun 11 15:28:36 kyle sudo[24075]: kyle : TTY=pts/2 ; PWD=/var/cache/pacman/pkg ; USER=root ; COMMAND=/usr/bin/systemctl status NetworkManager
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session closed for user root
Last edited by T0k3n (2014-07-03 15:18:01)

Check the changes:
https://projects.archlinux.org/svntogit … e192881dc5
https://projects.archlinux.org/svntogit … ee906b6c44
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.

Build failed after updating to CTP 3.1

Hi,
After updating to CTP 3.1, I created a blank cordova project and tried to build it.It shows build failed.I can see a warning - The typescript file was given no files for compilation .However this shouldn't stop the build ?
Please advise.

Set your build verbosity to diagnostic (Tools>Options>Projects and Solutions>Build and Run>Set MSBuild project build output verbosity= Diagnostic) and rebuild your project. The added details should reveal why the build is failing.
-Ellen

Aperture fail after updating to snow leopard

after updating to snow leopard, aperture 3 is not working - i have downloaded aperture update 3.1.1, but now it is saying i must have aperture 3 when i try to run it - which i already have???, any help greatly appreciated, thanks.

Doh! - It had "original" in the filename. Renamed it and run the update successfully... All working well, thanks for your patience... Still getting used to Macs.
Thanks again.

Startup fails after Security Update 2006-007

My eMac hangs at the initial gray startup screen. All I did was to allow Software Update to install Security Update 2006-007. I have waited as long as 60+ minutes, hoping some process would time out - but this is not the case.
My particulars: G4 eMac, 512Mb RAM, 40Gb drive with 15Gb free, 10.3.9 OS X Server (only supports a wireless classroom of 20 ibooks).
Troubleshooting I have done:
* Booted off of Mac OS X install disc. From Disk Utility, repaired permissions (minor fixes) and repaired hard drive (no errors at all).
* Booted into command-V mode. Hangs after only 7 lines. The last line: "BSD root: disk0s3, major 14, minor 2"
Is there any way to undo a Security Update from the Terminal window? I really don't want to do an 'install & archive', with all my user accounts, etc. I have a firewire backup, but as of last week when I got a CCC error it is no longer bootable. I am a high school teacher who knows a bit, but never enough

I seems I'm not the only one experiencing start up problems after the 2006-2007 security update. G-4 Power PC, 466MHZ running OSX 10.3.9
My problems are exasperated by the fact that there was a power outage exactly the same time I did the security update. Now my start up screen goes no further than the whitescreem with the blue bar. IT comes to within 1/4" or 1/16" of the end and stops.
What I've tried:
booted from OSx 10.3.9 Install disk,used disk utilities, Disk First Aid, no major problems found.
Still sticks on start.
Started from Disk Warrior and ran repair no problems. Still sticks on start.
Tried to Safe Boot, with no success.
Zapped the PRAM 4 times. No success.
Tried to start from OSX install disk then bring up my backup disk drive from start up manager. Able to bring up back up, but same problem on start up as built in disk drive. Now I don't know how to unmount the backup disk drive without damage. THIS IS MY MAIN CONCERN AT THIS POINT. IF I LOSE THE BACKUP I'M FRIED!
Please help, I don't know when we will have another power outage and my UPS backup power seems to be compromised also.
Thanks
G-4 466 Mac OS X (10.3.9)

Startup failing after upgrade to Yosemite

After my update to yosemite my computer doesn’t startup anymore. It only shows the grey Apple logo and the “startup bar” is not progressing anymore. I now always have to perform a hard shut-down and do a re-start, and only in the second or third attempt it will start up "normally". The computer also has become very slow and unresponsive and takes a long time to start up after signing in.
To solve the problem (I hoped) I have done a complete clean install of Yosemite and thereafter installing my old programs using the Migration assistent. This did't help. Just now I have made an extra partition and only installed Yosemite on this partition. The same problem is still showing and the computer is still not starting up. I also experience complete kernel panics, where the message is different every time (I have pictures available of a number of kernel panics).
I still have a partition with Mavericks which starts up just fine, so the problem doesn't seem to be my computer (although WiFi stopped working some 2 months ago). I now performed a EtreCheck with results listed as below. Anyone an idea what is wrong?
EtreCheck version: 2.0.11 (98)
Report generated 3 Nov 2014 21:50:54 CET
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,2
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Video Information: ℹ️
Intel HD Graphics 4000 -
PL2377 spdisplays_1080p
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:51:36
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Main disk (disk0s2) / [Startup]: 837.97 GB (270.41 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Main disk 2 (disk0s4) /Volumes/Main disk 2 : 67.58 GB (56.53 GB free)
Recovery HD (disk0s5) <not mounted> [Recovery]: 650 MB
Secundairy disk (disk0s6) /Volumes/Secundairy disk : 90.42 GB (58.76 GB free)
Recovery HD (disk0s7) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Mitsumi Electric Hub in Apple Extended USB Keyboard
Fujitsu Takamisawa Component Apple Optical USB Mouse
Mitsumi Electric Apple Extended USB Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) Support
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) Support
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.SafariNotificationAgent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.iconservices.iconservicesd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.spindump.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
[failed] org.cups.cupsd.plist
Launch Agents: ℹ️
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[running] com.sophos.uiserver.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.common.servicemanager.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
User Launch Agents: ℹ️
[invalid?] com.adobe.ARM.[...].plist Support
[invalid?] com.google.GoogleContactSyncAgent.plist Support
[invalid?] com.google.keystone.agent.plist Support
[invalid?] com.spotify.webhelper.plist Support
[invalid?] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
[invalid?] org.virtualbox.vboxwebsrv.plist Support
User Login Items: ℹ️
MyDriveConnect Application (/Applications/MyDriveConnect.app)
Microsoft Database Daemon UNKNOWN (missing value)
Dropbox ApplicationHidden (/Applications/Dropbox.app)
Canon IJ Network Scanner Selector EX ApplicationHidden (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
Canon IJ Network Scanner Selector EX ApplicationHidden (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
fuspredownloader ApplicationHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
RSS Menu
3rd Party Preference Panes: ℹ️
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Logitech Control Center Support
Perian Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Main disk: Disk size: 837.97 GB Disk used: 567.57 GB
Destinations:
MacOSX Backup [Local]
Total size: 999.83 GB
Total number of backups: 3
Oldest backup: 2014-10-26 13:35:42 +0000
Last backup: 2014-11-02 14:43:18 +0000
Size of backup disk: Too small
Backup size 999.83 GB < (Disk used 567.57 GB X 3)
Backup Eric Powermac [Network]
Total size: 1.07 TB
Total number of backups: 23
Oldest backup: 2014-02-21 07:56:49 +0000
Last backup: 2014-10-23 09:05:28 +0000
Size of backup disk: Too small
Backup size 1.07 TB < (Disk used 567.57 GB X 3)
Top Processes by CPU: ℹ️
      6% WindowServer
      4% Safari
      3% Dropbox
      2% com.apple.WebKit.Networking
      1% TechToolProDaemon
Top Processes by Memory: ℹ️
107 MB Safari
73 MB com.apple.internetaccounts
64 MB InterCheck
64 MB cloudd
64 MB Spotlight
Virtual Memory Information: ℹ️
57 MB Free RAM
1.08 GB Active RAM
1.04 GB Inactive RAM
889 MB Wired RAM
7.71 GB Page-ins
247 MB Page-outs

Off hand it looks like a botched upgrade. I suggest a reinstall from scratch:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Yosemite: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

Hello.
Just received this Tablet.
Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
After that i started testing ,Wps connection , No security Wifi etc etc.
*Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
However this is frustrating.
Maybe you have to sort this out?
I have seen and other people returning this tablet after having this problem.
It is not a hardware problem since its working ok before the update.
Of course tried factory reset twice.
Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
It requires a complete reset. Not the soft reset from within Android.
I'll post it here as they will check through moderation I guess.
Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
1. Make sure the tablet is off and not in standby.
2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
3. Use the volume buttons to select the white box on the right.
4. Once selected, press the power button.
5. Use the volume buttons to select wipe cache partition and then press the power button.
6. Select Yes and press the power button.
7. Use the volume buttons to select wipe data/factory reset and then press the power button.
8. Select Yes and press the power button.
9. The tablet will now reset.
If you have any issues after the reset please get back to us as soon as possible!
Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
They needed my name and serial numbers probably to log problems etc.
Message was edited by: bensimmo

[Solved] Atheros Wireless Fails after Update

After the update to kernel 3.6.37 the wireless on my Macbook pro is close to useless, but used to work very well before. Madwifi was upgraded as well but I suspect another problem.
Using WICD there is no wireless at all! With networkmanager the available networks are visible and sometimes logs on. However, the network fails quickly and starts asking for the password - most of the time it is useless typing in the password again. So the wireless is basically working but very unstable with networkmanager and non-existent anymore with WICD.
Any ideas?
Last edited by jcci (2011-02-06 05:48:20)

Found out more which might be significant for madwifi users:
According to the wiki I loaded the following modules in rc.conf: ath-hal, ath9k, wlan
Beside this one line in the modprobe.conf should be added: alias ath0 ath_pci. This way wicd as well as networkmanager used ath0 for connecting to wireless.
After the update I noticed that there is another wifi device in ifconfig listed: wlan0. So I suspected that 2 devices pointing at the same hardware may cause the instability, but de-activating one by ifconfig didn't help. Now I noticed by loading the modules one by one that the new ath9k is already defining wlan0 and the wireless starts working without loading the module wlan. It looks stable so far, but if I should be right I'm impossibly the only one having this trouble.
Confirmation would be nice, but I will mark this thread "solved" now.

Why did my airtunes fail after updating to iOS 5.0

I used to be able to play most anything from my iPad to either of my Airport Express units and the speakers atteched to them.
After iOS 5.0 update to my iPad 1, i am no longer able to do so.
The setup still works correctly with itunes on laptops in the house, and only fails with the iOS 5.0 updated unit.
Any helpful thoughts?
A

What happens if you try a hard reset of the iPod? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, see this article for more troubleshooting assistance.
http://support.apple.com/kb/ts1702
It may be necessary to restore your iPod from a previous backup in iTunes or to factory settings if the problem still persists.
B-rock

Dhcpcd failing after update

not sure as to the root cause of this, but after a recent update & restart my computer as been unable to access my network. after a /etc/rc.d/network (re)start I get the following error message -
::Stopping Network [Done]
::Starting Network [BUSY]
/sbin/dhcpcd invalid option -- S
usage: dhcpcd [(here it spits out the usage options, no need to type it all out, i'm assuming)]
[FAIL]
any help would be much appreciated...
regards/thanks,
cjcn

Why did you put -S in /etc/conf.d/dhcpcd? It was never there per default and the current manpage doesn't mention it.
Last edited by byte (2007-04-17 23:48:58)

Photo booth again fails after Update of System

A few months ago I found my Photo Booth stopped showing a camera picture after I upgraded with a System Update but then cured the problem after a simple Reboot.
Well the photo booth has again failed to operate following a recent Update of the OS and all I get is a blank screen. This time it won't kick start after a re boot. Is there any way to find out why it won't switch on its internal camera and cure it for good.
The saved snapshots will show in the photo booth but it's simply the "live" picture that won't work.
There is plenty of daylight in the room so it shouldn't be just a black screen should it?
Thanks
Plado

I think I can pull this question off now. The system has wrong-footed me again.
It seems to be that when you have too many computers all calling upon the same wireless broadband connection in the one building, the DNS or something gets choked.
I switched off the router the modem the wireless and the main desktop pc
I then rebooted them all. After it was all up and running I turned on the MacBook and connected via the usual AirPort and both Google Earth and PhotoBooth were running as sweet as a nut.
It seems all too easy to think the Macbook has got itself in a twist when in fact it's just responding to a tired and emotional broadband connection that has lost its bandwidth due to over crowded usage.
I'll close this question now.
Sorry to alert anyone.
Plado

Publish to Flikr it fails after update to Lightroom CC?

Hi!
After that I updated to Lightroom CC publish to Flikr fails?
I have tried to reload plugin and remove and re-authorize Flikr account without success.
Any clues?
/Klas

Hi Tim,
I see the "AnalyticReporting" on an existing report with a hyperlink, by doing a right click on the hyprlink and then copy text.
In SP3 it shows up with the following:
https://xxxdevpp.xxxxx.com:8443/AnalyticalReporting/opendoc/logonVintela.do?sDocName=Journal_Line_Details&sType=wid&sWindow=New&appKind=InfoView&lsSBusiness_Unit=CS &lsSPeriod=5&lsSFiscal Year=2010&lsSDeptid=040 &lsSAmount=5867.31&lsSJournal_Line=8832&lsSVoucher_id=1&lsSJournal_Id=HR00434265
The same report in SP2 FP2.2:
https://xxxprod.xxxxxx.com:8443/OpenDocument/opendoc/logonVintela.do?sDocName=Journal_Line_Details&sType=wid&sWindow=New&appKind=InfoView&lsSBusiness_Unit=CS &lsSPeriod=4&lsSFiscal Year=2010&lsSDeptid=040 &lsSAmount=16214.23&lsSJournal_Line=2398&lsSVoucher_id=1&lsSJournal_Id=HR00430868
I have opened a ticket with tech support and so far their only solution is to have us re-write all of our hyperlink formula's, which will affect a lot of reports and formula's. I was hoping you might have a solution..
Thanks,
Randy

Startup failed after update

Similar Messages

Maybe you are looking for