Startup goes from 15 seconds to just under 2 minutes

Purchased a new MBP early April. It is a 2 GHz Intel Core i7 with 8GB of memory, running 10.6.7. When I got it start times were around 15-17 seconds, and after installing CS5, Microsoft W/P/E and my other small apps, it still started up in around 17 seconds, and haven't installed anything since then. Yesterday, I updated using the automatic Software Update and now it takes just under 2 minutes. I've tried repair permissions. Nothing.

Adobe and Microsoft are always going to be sort of late to the update party, you'll just have to wait.
Disconnect your router so there is no internet access what so ever, does the machine boot faster?
I'm suspecting a addition to EFI by both Microsoft and Adobe, Apple released a firmware update in the last Software Update.
EFI is a powerful firmware that can contact the internet and verify software installed on your machine before the operating system starts.
So i'm thinking the slow boot is EFI "phoning home" especially to Microsoft and Adobe who like to copy protect their wares.

Similar Messages

  • Boot time goes from seconds to minutes with udev and systemd

    A few weeks ago updated and saw that on reboot I was getting messages from systemd that it was waiting for all my LVM partitions, and then finally that:
    'A start job is running for udev Wait for Complete Device Initialization'
    This has never happened before and I can't find any information about it in dmesg.
    Here is my fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # UUID=f9f12b36-2333-4c46-949a-0bd86e1ab254
    /dev/mapper/Linux-Arch / ext4 rw,relatime,data=ordered 0 1
    # UUID=21ee7aa4-234e-463d-af2a-6c4cb3551ea8
    /dev/mapper/Linux-Home /home ext4 rw,relatime,data=ordered 0 2
    # UUID=E421-470F LABEL=SYSTEM_DRV
    /dev/sda2 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
    # UUID=11bf5a3f-86a5-48b7-93da-994e39463f0d
    /dev/mapper/Linux-Swap none swap defaults 0 0
    # Windows
    # /dev/sda5 /mnt/Windows ntfs-3g defaults,ro,noauto 0 0
    I've been digging around for a few weeks and I can't find anything and my boot time is really slow.
    systemd-analyze blame:
    1min 1.644s systemd-udev-settle.service
    10.079s systemd-udev-trigger.service
    9.999s systemd-remount-fs.service
    1.003s lvm2-pvscan@8:8.service
    795ms systemd-timesyncd.service
    700ms systemd-update-utmp.service
    583ms systemd-sysctl.service
    560ms rtkit-daemon.service
    469ms udisks2.service
    449ms NetworkManager.service
    438ms kmod-static-nodes.service
    363ms systemd-vconsole-setup.service
    214ms tmp.mount
    184ms sys-kernel-debug.mount
    144ms sys-kernel-config.mount
    123ms systemd-tmpfiles-clean.service
    116ms dev-mqueue.mount
    90ms [email protected]
    85ms systemd-logind.service
    82ms dev-hugepages.mount
    79ms bluetooth.service
    57ms [email protected]
    42ms polkit.service
    31ms accounts-daemon.service
    31ms wpa_supplicant.service
    24ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    20ms colord.service
    20ms gdm.service
    20ms upower.service
    19ms [email protected]
    18ms [email protected]
    17ms [email protected]
    15ms boot.mount
    12ms systemd-tmpfiles-setup-dev.service
    8ms dev-mapper-Linux\x2dSwap.swap
    8ms systemd-tmpfiles-setup.service
    8ms systemd-journal-flush.service
    5ms home.mount
    5ms systemd-user-sessions.service
    4ms systemd-backlight@backlight:intel_backlight.service
    3ms systemd-random-seed.service
    2ms systemd-udevd.service
    1ms sys-fs-fuse-connections.mount
    EDIT 2: Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
    [ 0.000000] Command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0xc3217018-0xc3227057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3217017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3217018-0x00000000c3227057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3227058-0x00000000c4daffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f62000) (15MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f62000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fba4000) (1019MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fba4000-0x0000000080000000) (4MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3217000) (0MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3217000-0x00000000c3228000) (0MB)
    [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3228000-0x00000000c418a000) (15MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
    [ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bf000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
    [ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c76e6000) (19MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000c76e6000-0x00000000c864a000) (15MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
    [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
    [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
    [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
    [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
    [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
    [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c8882000) (0MB)
    [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8882000-0x00000000c88b0000) (0MB)
    [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c88b0000-0x00000000c88b1000) (0MB)
    [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b1000-0x00000000c8c65000) (3MB)
    [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
    [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
    [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7a000) (0MB)
    [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7a000-0x00000000ca3bf000) (23MB)
    [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
    [ 0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
    [ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
    [ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
    [ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
    [ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
    [ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
    [ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
    [ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
    [ 0.000000] efi: mem67: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
    [ 0.000000] efi: mem68: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
    [ 0.000000] efi: mem69: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
    [ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
    [ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem73: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
    [ 0.000000] efi: mem74: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
    [ 0.000000] efi: mem75: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
    [ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
    [ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
    [ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem81: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
    [ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
    [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FC0000000 write-back
    [ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
    [ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
    [ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
    [ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
    [ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
    [ 0.000000] [mem 0xca600000-0xca7befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x7fba4000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 00000000cafbb000 000040
    [ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
    [ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
    [ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
    [ 0.000000] On node 0 totalpages: 2066246
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3975 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12807 pages used for memmap
    [ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19416 pages used for memmap
    [ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3217000-0xc3217fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3227000-0xc3227fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86656 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7988560K/8264984K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 276424K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.263 MHz processor
    [ 0.000042] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.52 BogoMIPS (lpj=24942630)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20131218
    [ 0.008110] ACPI: All ACPI Tables successfully acquired
    [ 0.034617] Security Framework initialized
    [ 0.034625] Yama: becoming mindful.
    [ 0.035238] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.037855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.039006] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039017] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039253] Initializing cgroup subsys memory
    [ 0.039259] Initializing cgroup subsys devices
    [ 0.039260] Initializing cgroup subsys freezer
    [ 0.039262] Initializing cgroup subsys net_cls
    [ 0.039264] Initializing cgroup subsys blkio
    [ 0.039291] CPU: Physical Processor ID: 0
    [ 0.039293] CPU: Processor Core ID: 0
    [ 0.039298] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.039769] mce: CPU supports 7 MCE banks
    [ 0.039782] CPU0: Thermal monitoring enabled (TM1)
    [ 0.039792] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.039910] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
    [ 0.043468] ftrace: allocating 20111 entries in 79 pages
    [ 0.054896] dmar: Host address width 36
    [ 0.054899] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.054906] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.054908] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.054912] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.054914] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
    [ 0.054915] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
    [ 0.054992] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.054994] HPET id 0 under DRHD base 0xfed91000
    [ 0.054995] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.055169] Enabled IRQ remapping in x2apic mode
    [ 0.055170] Enabling x2apic
    [ 0.055172] Enabled x2apic
    [ 0.055180] Switched APIC routing to cluster x2apic.
    [ 0.055649] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.155770] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.155781] TSC deadline timer enabled
    [ 0.155793] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.155800] ... version: 3
    [ 0.155802] ... bit width: 48
    [ 0.155803] ... generic registers: 4
    [ 0.155804] ... value mask: 0000ffffffffffff
    [ 0.155805] ... max period: 0000ffffffffffff
    [ 0.155806] ... fixed-purpose events: 3
    [ 0.155807] ... event mask: 000000070000000f
    [ 0.157083] x86: Booting SMP configuration:
    [ 0.157086] .... node #0, CPUs: #1 #2 #3
    [ 0.198397] x86: Booted up 1 node, 4 CPUs
    [ 0.198401] smpboot: Total of 4 processors activated (19954.10 BogoMIPS)
    [ 0.202933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.203185] devtmpfs: initialized
    [ 0.206444] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
    [ 0.207361] pinctrl core: initialized pinctrl subsystem
    [ 0.207403] RTC time: 18:04:53, date: 11/03/14
    [ 0.207440] NET: Registered protocol family 16
    [ 0.207534] cpuidle: using governor ladder
    [ 0.207535] cpuidle: using governor menu
    [ 0.207568] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.207570] ACPI: bus type PCI registered
    [ 0.207572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.207648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.207651] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.207745] PCI: Using configuration type 1 for base access
    [ 0.208531] bio: create slab <bio-0> at 0
    [ 0.208645] ACPI: Added _OSI(Module Device)
    [ 0.208647] ACPI: Added _OSI(Processor Device)
    [ 0.208648] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.208649] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.211733] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.236410] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.236803] ACPI: Dynamic OEM Table Load:
    [ 0.236805] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.266214] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.266634] ACPI: Dynamic OEM Table Load:
    [ 0.266636] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.296118] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.296501] ACPI: Dynamic OEM Table Load:
    [ 0.296503] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.773800] ACPI: Interpreter enabled
    [ 0.773808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [ 0.773813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [ 0.773829] ACPI: (supports S0 S3 S4 S5)
    [ 0.773831] ACPI: Using IOAPIC for interrupt routing
    [ 0.773864] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.774030] ACPI: No dock devices found.
    [ 0.780437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.780443] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.780579] \_SB_.PCI0:_OSC invalid UUID
    [ 0.780581] _OSC request data:1 1f 0
    [ 0.780585] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.781130] PCI host bridge to bus 0000:00
    [ 0.781133] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.781136] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.781137] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.781139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.781141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.781143] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.781145] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.781147] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.781148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.781150] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.781152] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.781154] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.781156] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.781157] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.781159] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.781161] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.781163] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
    [ 0.781171] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.781277] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.781291] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.781299] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.781305] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
    [ 0.781403] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.781415] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.781541] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.781567] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
    [ 0.781646] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.781694] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.781745] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.781772] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
    [ 0.781856] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.781955] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.781980] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
    [ 0.782080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.782144] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.782193] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.782212] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
    [ 0.782296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.782345] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.782396] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.782420] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
    [ 0.782520] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.782583] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.782634] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
    [ 0.782828] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.782850] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
    [ 0.782859] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
    [ 0.782869] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
    [ 0.782877] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
    [ 0.782887] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
    [ 0.782897] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
    [ 0.782948] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.783031] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.783050] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
    [ 0.783074] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
    [ 0.783173] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.783198] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
    [ 0.783553] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783614] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783672] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783732] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783790] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783908] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783966] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.784076] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.784121] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.784209] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.784212] vgaarb: loaded
    [ 0.784213] vgaarb: bridge control possible 0000:00:02.0
    [ 0.784333] PCI: Using ACPI for IRQ routing
    [ 0.786165] PCI: pci_cache_line_size set to 64 bytes
    [ 0.786172] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.786212] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.786214] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.786216] e820: reserve RAM buffer [mem 0xc3217018-0xc3ffffff]
    [ 0.786217] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
    [ 0.786219] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
    [ 0.786221] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.786222] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
    [ 0.786315] NetLabel: Initializing
    [ 0.786317] NetLabel: domain hash size = 128
    [ 0.786318] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.786331] NetLabel: unlabeled traffic allowed by default
    [ 0.786356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.786361] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.788395] Switched to clocksource hpet
    [ 0.793449] pnp: PnP ACPI init
    [ 0.793466] ACPI: bus type PNP registered
    [ 0.793581] pnp 00:00: [dma 4]
    [ 0.793609] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.793633] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.793732] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.793773] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.793820] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.793822] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.793824] system 00:04: [io 0xffff] has been reserved
    [ 0.793826] system 00:04: [io 0xffff] has been reserved
    [ 0.793829] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.793831] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.793833] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.793835] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.793838] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.793870] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.793919] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.793922] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.793963] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.794001] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
    [ 0.794134] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.794137] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.794139] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.794141] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.794143] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.794145] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.794148] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.794150] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.794152] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.794154] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.794157] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.794451] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.794453] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.794456] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.794473] pnp: PnP ACPI: found 11 devices
    [ 0.794475] ACPI: bus type PNP unregistered
    [ 0.801229] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
    [ 0.801237] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.801239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.801241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.801243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.801245] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.801247] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.801249] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.801251] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.801253] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.801254] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.801256] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.801258] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.801260] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.801262] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.801264] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.801266] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
    [ 0.801299] NET: Registered protocol family 2
    [ 0.801504] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.801681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.801864] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.801881] TCP: reno registered
    [ 0.801894] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.801927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.802001] NET: Registered protocol family 1
    [ 0.802012] pci 0000:00:02.0: Boot video device
    [ 0.838581] PCI: CLS 64 bytes, default 64
    [ 0.838623] Unpacking initramfs...
    [ 0.931743] Freeing initrd memory: 4464K (ffff88007fba4000 - ffff880080000000)
    [ 0.931755] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.931757] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
    [ 0.931789] Simple Boot Flag at 0x44 set to 0x1
    [ 0.932025] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932033] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932042] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932051] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932111] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.932127] Scanning for low memory corruption every 60 seconds
    [ 0.932408] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.948267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.949675] zbud: loaded
    [ 0.949848] VFS: Disk quotas dquot_6.5.2
    [ 0.949897] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.950024] msgmni has been set to 15732
    [ 0.950080] Key type big_key registered
    [ 0.950224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.950262] io scheduler noop registered
    [ 0.950265] io scheduler deadline registered (default)
    [ 0.950296] io scheduler cfq registered
    [ 0.950355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.950370] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.950401] efifb: probing for efifb
    [ 0.950423] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 5628k, total 5625k
    [ 0.950425] efifb: mode is 1600x900x32, linelength=6400, pages=1
    [ 0.950426] efifb: scrolling: redraw
    [ 0.950428] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.955222] Console: switching to colour frame buffer device 200x56
    [ 0.959939] fb0: EFI VGA frame buffer device
    [ 0.959947] intel_idle: MWAIT substates: 0x21120
    [ 0.959948] intel_idle: v0.4 model 0x3A
    [ 0.959949] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.960140] GHES: HEST is not enabled!
    [ 0.960192] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.960674] Linux agpgart interface v0.103
    [ 0.960719] rtc_cmos 00:05: RTC can wake from S4
    [ 0.960854] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.960891] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.960901] Intel P-state driver initializing.
    [ 0.960913] Intel pstate controlling: cpu 0
    [ 0.960933] Intel pstate controlling: cpu 1
    [ 0.960948] Intel pstate controlling: cpu 2
    [ 0.960965] Intel pstate controlling: cpu 3
    [ 0.960993] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.961133] TCP: cubic registered
    [ 0.961239] NET: Registered protocol family 10
    [ 0.961427] NET: Registered protocol family 17
    [ 0.961965] registered taskstats version 1
    [ 0.962642] Magic number: 6:677:88
    [ 0.962705] acpi INT3F0D:00: hash matches
    [ 0.962828] rtc_cmos 00:05: setting system clock to 2014-11-03 18:04:54 UTC (1415037894)
    [ 0.963002] PM: Checking hibernation image partition /dev/mapper/Linux-Swap
    [ 0.963010] PM: Hibernation image not present or could not be loaded.
    [ 0.964972] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
    [ 0.964975] Write protecting the kernel read-only data: 8192k
    [ 0.970240] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
    [ 0.971926] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
    [ 0.980028] random: systemd-tmpfile urandom read with 3 bits of entropy available
    [ 0.981987] systemd-udevd[57]: starting version 216
    [ 0.993396] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.999168] ACPI: bus type USB registered
    [ 0.999188] usbcore: registered new interface driver usbfs
    [ 0.999195] usbcore: registered new interface driver hub
    [ 0.999618] SCSI subsystem initialized
    [ 0.999671] usbcore: registered new device driver usb
    [ 1.000171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.000324] ehci-pci: EHCI PCI platform driver
    [ 1.000472] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.000479] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.000498] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.001114] libata version 3.00 loaded.
    [ 1.004412] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.004425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
    [ 1.005570] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.005576] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.018706] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.018976] hub 1-0:1.0: USB hub found
    [ 1.018989] hub 1-0:1.0: 2 ports detected
    [ 1.019277] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.019281] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.019293] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.023202] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.023218] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
    [ 1.028001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.038738] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.039375] hub 2-0:1.0: USB hub found
    [ 1.039401] hub 2-0:1.0: 2 ports detected
    [ 1.039970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.039984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.040112] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.040137] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 1.040384] hub 3-0:1.0: USB hub found
    [ 1.040404] hub 3-0:1.0: 4 ports detected
    [ 1.040970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.040975] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.041377] hub 4-0:1.0: USB hub found
    [ 1.041406] hub 4-0:1.0: 4 ports detected
    [ 1.041933] ahci 0000:00:1f.2: version 3.0
    [ 1.042141] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.042189] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
    [ 1.042192] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.042951] scsi0 : ahci
    [ 1.043089] scsi1 : ahci
    [ 1.043205] scsi2 : ahci
    [ 1.043321] scsi3 : ahci
    [ 1.043443] scsi4 : ahci
    [ 1.043605] scsi5 : ahci
    [ 1.043699] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
    [ 1.043704] ata2: DUMMY
    [ 1.043707] ata3: DUMMY
    [ 1.043709] ata4: DUMMY
    [ 1.043711] ata5: DUMMY
    [ 1.043713] ata6: DUMMY
    [ 1.339195] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.389168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.390125] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390134] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
    [ 1.390139] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.390821] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390986] ata1.00: configured for UDMA/133
    [ 1.391372] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
    [ 1.401296] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 1.401579] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.401588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.401790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.404906] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
    [ 1.406850] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.490272] hub 1-1:1.0: USB hub found
    [ 1.490465] hub 1-1:1.0: 6 ports detected
    [ 1.512747] device-mapper: uevent: version 1.0.3
    [ 1.512926] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 1.519284] bio: create slab <bio-1> at 1
    [ 1.545404] PM: Starting manual resume from disk
    [ 1.545409] PM: Hibernation image partition 254:0 present
    [ 1.545411] PM: Looking for hibernation image.
    [ 1.545576] PM: Image not found (code -22)
    [ 1.545578] PM: Hibernation image not present or could not be loaded.
    [ 1.579429] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.579432] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.583409] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.584558] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.584561] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.609376] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.665486] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
    [ 1.665742] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
    [ 1.665813] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
    [ 1.665853] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
    [ 1.665880] systemd[1]: Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
    [ 1.665906] systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls of type cgroup with options net_cls.
    [ 1.665932] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
    [ 1.665987] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 1.666093] systemd[1]: Detected architecture 'x86-64'.
    [ 1.667499] systemd[1]: Set hostname to <arch-yogi>.
    [ 1.668059] systemd[1]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd.
    [ 1.668094] systemd[1]: Installed release agent.
    [ 1.668133] systemd[1]: Set up TFD_TIMER_CANCEL_ON_SET timerfd.
    [ 1.669521] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-getty-generator as 147.
    [ 1.669581] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-gpt-auto-generator as 148.
    [ 1.669637] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-fstab-generator as 149.
    [ 1.669689] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-system-update-generator as 150.
    [ 1.669743] systemd[146]: Spawned /usr/lib/systemd/system-generators/lvm2-activation-generator as 151.
    [ 1.669826] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-efi-boot-generator as 152.
    [ 1.669899] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-debug-generator as 153.
    [ 1.669992] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-cryptsetup-generator as 154.
    [ 1.671020] systemd[146]: /usr/lib/systemd/system-generators/systemd-getty-generator succeeded.
    [ 1.677317] systemd[146]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator succeeded.
    [ 1.678493] systemd[146]: /usr/lib/systemd/system-generators/systemd-fstab-generator succeeded.
    [ 1.678499] systemd[146]: /usr/lib/systemd/system-generators/systemd-system-update-generator succeeded.
    [ 1.689210] systemd[146]: /usr/lib/systemd/system-generators/lvm2-activation-generator succeeded.
    [ 1.689216] systemd[146]: /usr/lib/systemd/system-generators/systemd-efi-boot-generator succeeded.
    [ 1.689220] systemd[146]: /usr/lib/systemd/system-generators/systemd-debug-generator succeeded.
    [ 1.689223] systemd[146]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator succeeded.
    [ 1.689278] systemd[1]: /usr/lib/systemd/system-generators succeeded.
    [ 1.689509] systemd[1]: Looking for unit files in (higher priority first):
    [ 1.689512] systemd[1]: /etc/systemd/system
    [ 1.689513] systemd[1]: /run/systemd/system
    [ 1.689514] systemd[1]: /run/systemd/generator
    [ 1.689516] systemd[1]: /usr/local/lib/systemd/system
    [ 1.689517] systemd[1]: /usr/lib/systemd/system
    [ 1.689518] systemd[1]: /run/systemd/generator.late
    [ 1.689520] systemd[1]: SysV init scripts and rcN.d links support disabled
    [ 1.696010] systemd[1]: Failed to load configuration for auditd.service: No such file or directory
    [ 1.699470] systemd[1]: Failed to load configuration for plymouth-start.service: No such file or directory
    [ 1.704745] systemd[1]: Failed to load configuration for syslog.service: No such file or directory
    [ 1.711661] systemd[1]: Failed to load configuration for plymouth-quit.service: No such file or directory
    [ 1.712238] systemd[1]: Failed to load configuration for plymouth-quit-wait.service: No such file or directory
    [ 1.720811] systemd[1]: Using notification socket /run/systemd/notify
    [ 1.720824] systemd[1]: Successfully created private D-Bus server.
    [ 1.720829] systemd[1]: -.mount changed dead -> mounted
    [ 1.720856] systemd[1]: Activating default unit: default.target
    [ 1.720860] systemd[1]: Trying to enqueue job graphical.target/start/isolate
    [ 1.720991] systemd[1]: Looking at job [email protected]/stop conflicted_by=yes
    [ 1.720993] systemd[1]: Looking at job [email protected]/start conflicted_by=no
    [ 1.720996] systemd[1]: Fixing conflicting jobs [email protected]/stop,[email protected]/start by deleting job [email protected]/start
    [ 1.720998] systemd[1]: Looking at job gdm.service/start conflicted_by=no
    [ 1.721000] systemd[1]: Looking at job gdm.service/stop conflicted_by=no
    [ 1.721002] systemd[1]: Fixing conflicting jobs gdm.service/start,gdm.service/stop by deleting job gdm.service/stop
    [ 1.721036] systemd[1]: Installed new job graphical.target/start as 1
    [ 1.721044] systemd[1]: Installed new job multi-user.target/start as 2
    [ 1.721048] systemd[1]: Installed new job basic.target/start as 3
    [ 1.721052] systemd[1]: Installed new job sysinit.target/start as 4
    [ 1.721056] systemd[1]: Installed new job local-fs.target/start as 5
    [ 1.721059] systemd[1]: Installed new job boot.mount/start as 6
    [ 1.721063] systemd[1]: Installed new job system.slice/start as 8
    [ 1.721067] systemd[1]: Installed new job -.slice/start as 9
    [ 1.721070] systemd[1]: Installed new job dev-sda2.device/start as 10
    [ 1.721077] systemd[1]: Installed new job [email protected]/start as 11
    [ 1.721082] systemd[1]: Installed new job system-systemd\x2dfsck.slice/start as 12
    [ 1.721085] systemd[1]: Installed new job home.mount/start as 15
    [ 1.721089] systemd[1]: Installed new job dev-mapper-Linux\x2dHome.device/start as 16
    [ 1.721093] systemd[1]: Installed new job systemd-fsck@dev-mapper-Linux\x2dHome.service/start as 17
    [ 1.721097] systemd[1]: Installed new job systemd-fsck-root.service/start as 18
    [ 1.721100] systemd[1]: Installed new job tmp.mount/start as 19
    [ 1.721104] systemd[1]: Installed new job systemd-remount-fs.service/start as 20
    [ 1.721107] systemd[1]: Installed new job local-fs-pre.target/start as 21
    [ 1.721110] systemd[1]: Installed new job boot.automount/start as 22
    [ 1.721114] systemd[1]: Installed new job swap.target/start as 23
    [ 1.721117] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.swap/start as 24
    [ 1.721121] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.device/start as 25
    [ 1.721124] systemd[1]: Installed new job systemd-timesyncd.service/start as 26
    [ 1.721127] systemd[1]: Installed new job time-sync.target/start as 27
    [ 1.721131] systemd[1]: Installed new job ldconfig.service/start as 28
    [ 1.721134] systemd[1]: Installed new job sys-kernel-debug.mount/start as 29
    [ 1.721137] systemd[1]: Installed new job systemd-vconsole-setup.service/start as 30
    [ 1.721140] systemd[1]: Installed new job sys-kernel-config.mount/start as 31
    [ 1.721144] systemd[1]: Installed new job systemd-journal-flush.service/start as 32
    [ 1.721147] systemd[1]: Installed new job systemd-journald.service/start as 33
    [ 1.721150] systemd[1]: Installed new job systemd-journald.socket/start as 34
    [ 1.721154] systemd[1]: Installed new job systemd-journald-dev-log.socket/start as 35
    [ 1.721157] systemd[1]: Installed new job systemd-sysctl.service/start as 36
    [ 1.721160] systemd[1]: Installed new job systemd-firstboot.service/start as 37
    [ 1.721164] systemd[1]: Installed new job cryptsetup.target/start as 38
    [ 1.721167] systemd[1]: Installed new job lvm2-lvmetad.socket/start as 39
    [ 1.721170] systemd[1]: Installed new job kmod-static-nodes.service/start as 40
    [ 1.721173] systemd[1]: Installed new job systemd-binfmt.service/start as 41
    [ 1.721177] systemd[1]: Installed new job sys-fs-fuse-connections.mount/start as 42
    [ 1.721180] systemd[1]: Installed new job systemd-journal-catalog-update.service/start as 43
    [ 1.721184] systemd[1]: Installed new job systemd-udevd.service/start as 44
    [ 1.721187] systemd[1]: Installed new job systemd-udevd-control.socket/start as 45
    [ 1.721191] systemd[1]: Installed new job systemd-udevd-kernel.socket/start as 46
    [ 1.721194] systemd[1]: Installed new job systemd-ask-password-console.path/start as 47
    [ 1.721197] systemd[1]: Installed new job systemd-random-seed.service/start as 48
    [ 1.721200] systemd[1]: Installed new job dev-mqueue.mount/start as 49
    [ 1.721204] systemd[1]: Installed new job systemd-modules-load.service/start as 50
    [ 1.721207] systemd[1]: Installed new job proc-sys-fs-binfmt_misc.automount/start as 51
    [ 1.721211] systemd[1]: Installed new job systemd-tmpfiles-setup-dev.service/start as 52
    [ 1.721214] systemd[1]: Installed new job systemd-udev-trigger.service/start as 53
    [ 1.721217] systemd[1]: Installed new job systemd-tmpfiles-setup.service/start as 54
    [ 1.721220] systemd[1]: Installed new job systemd-update-utmp.service/start as 55
    [ 1.721224] systemd[1]: Installed new job dev-hugepages.mount/start as 56
    [ 1.721227] systemd[1]: Installed new job systemd-sysusers.service/start as 57
    [ 1.721230] systemd[1]: Installed new job systemd-udev-hwdb-update.service/start as 58
    [ 1.721233] systemd[1]: Installed new job systemd-update-done.service/start as 59
    [ 1.721237] systemd[1]: Installed new job sockets.target/start as 62
    [ 1.721240] systemd[1]: Installed new job acpid.socket/start as 63
    [ 1.721244] systemd[1]: Installed new job systemd-shutdownd.socket/start as 64
    [ 1.721247] systemd[1]: Installed new job dm-event.socket/start as 65
    [ 1.721250] systemd[1]: Installed new job systemd-initctl.socket/start as 66
    [ 1.721254] systemd[1]: Installed new job dbus.socket/start as 67
    [ 1.721257] systemd[1]: Installed new job timers.target/start as 68
    [ 1.721260] systemd[1]: Installed new job systemd-tmpfiles-clean.timer/start as 69
    [ 1.721263] systemd[1]: Installed new job paths.target/start as 70
    [ 1.721267] systemd[1]: Installed new job slices.target/start as 71
    [ 1.721270] systemd[1]: Installed new job acpid.service/start as 72
    [ 1.721272] systemd[1]: Installed new job systemd-udev-settle.service/start as 73
    [ 1.721276] systemd[1]: Installed new job remote-fs.target/start as 74
    [ 1.721279] systemd[1]: Installed new job NetworkManager.service/start as 75
    [ 1.721282] systemd[1]: Installed new job network.target/start as 76
    [ 1.721286] systemd[1]: Installed new job man-db.timer/start as 77
    [ 1.721289] systemd[1]: Installed new job dbus.service/start as 78
    [ 1.721292] systemd[1]: Installed new job getty.target/start as 79
    [ 1.721295] systemd[1]: Installed new job system-getty.slice/start as 81
    [ 1.721299] systemd[1]: Installed new job gdm.service

    So it times out (taking 3 minutes) then says
    [FAILED] Failed to start udev Wait for Complete Device Initialization.
    See "systemctl status systemd-udev-settle.service" for details
    [DEPEND] Dependency failed for ACPI event daemon
    so I ran
    systemctl status systemd-udev-settle
    with this output:
    ● systemd-udev-settle.service - udev Wait for Complete Device Initialization
    Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static)
    Active: active (exited) since Thu 2014-11-13 11:40:16 EST; 1min 24s ago
    Docs: man:udev(7)
    man:systemd-udevd.service(8)
    Process: 583 ExecStart=/usr/bin/udevadm settle (code=exited, status=0/SUCCESS)
    Main PID: 583 (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/systemd-udev-settle.service
    Nov 13 11:40:14 arch-yogi systemd[1]: systemd-udev-settle.service changed failed -> start
    Nov 13 11:40:16 arch-yogi systemd[1]: Child 583 belongs to systemd-udev-settle.service
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: main process exited, code=exited, status=0/SUCCESS
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service changed start -> exited
    Nov 13 11:40:16 arch-yogi systemd[1]: Job systemd-udev-settle.service/start finished, result=done
    Nov 13 11:40:16 arch-yogi systemd[1]: Started udev Wait for Complete Device Initialization.
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: cgroup is empty
    and after another
    systemd-analyze blame
    I get:
    2.358s systemd-udev-settle.service
    995ms lvm2-pvscan@8:8.service
    558ms rtkit-daemon.service
    488ms NetworkManager.service
    458ms udisks2.service
    341ms systemd-udev-trigger.service
    341ms systemd-binfmt.service
    319ms systemd-tmpfiles-setup-dev.service
    315ms systemd-random-seed.service
    301ms systemd-journald.service
    299ms proc-sys-fs-binfmt_misc.mount
    166ms systemd-udevd.service
    133ms [email protected]
    108ms systemd-journal-flush.service
    98ms systemd-logind.service
    90ms systemd-timesyncd.service
    80ms bluetooth.service
    65ms [email protected]
    47ms polkit.service
    37ms accounts-daemon.service
    28ms wpa_supplicant.service
    26ms systemd-sysctl.service
    25ms colord.service
    23ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    23ms [email protected]
    22ms [email protected]
    21ms [email protected]
    19ms boot.mount
    18ms upower.service
    17ms avahi-daemon.service
    14ms systemd-remount-fs.service
    13ms gdm.service
    11ms tmp.mount
    11ms systemd-vconsole-setup.service
    10ms sys-kernel-debug.mount
    9ms dev-mapper-Linux\x2dSwap.swap
    8ms kmod-static-nodes.service
    6ms systemd-tmpfiles-setup.service
    5ms systemd-user-sessions.service
    5ms dev-mqueue.mount
    4ms systemd-update-utmp.service
    3ms home.mount
    3ms sys-kernel-config.mount
    3ms sys-fs-fuse-connections.mount
    3ms systemd-backlight@backlight:intel_backlight.service
    2ms dev-hugepages.mount
    systemd-analyze gets it right though:
    Startup finished in 2.538s (firmware) + 62ms (loader) + 2.238s (kernel) + 3min 3.161s (userspace) = 3min 8.001s
    What can I do?

  • I have dual boot labs that I set up up for a school.  The Partitions consist of mountain lion and windows 7.  I use bootlicker as the software for selecting the operating systems.  When I choose windows, it takes just under 2 minutes to go to the login sc

    I have a dual boot lab that I set up for a school.  The partitions consist of Mountain Lion OSX and Windows 7 Ent.  I use bootpicker software for choosing the operating system at startup.  When I select the windows partition, it take just under 2 minutes from selection to the windows login screen.  It seems to take incredibly long for the mac to "shut down and hand over the operating system to windows. 
    Do you have any suggestions on how to get this timing faster?
    Thanks for any ideas/input

    The only suggestion I can make is to look ar ReFind (previuosly ReFit). Startup mamangement is one of its features.
    But
    It is very powerful so test it for yourself before deploying it. Some of the functions are best kept out of the hands of the curious, or 'playful'
    And you never answered this question.
    Tell me what the needs are, do the users always need to choose Windows or is this a variable?

  • I just bought an album and some of the songs are only playing 3 seconds of a 4 minute song. What do i do?

    I just bought an album and some of the songs are only playing 3 seconds of a 4 minute song. what do i do?

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
    If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

  • Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

    Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

    SOLVED!!!!!
    SO I did some more digging around and read ATI cards seem to overheat easily.  I knew the fan was working, but after closer inspection I realised there was ALOT of built up dust on the card and clogging the fan and airflow.  Blew it out with alot of compressed air, stuck it back in the Mac and BAM...no black screens.  I tested it by streaming 6 video sources...doing 2 screen captures at once as well as watching a HD movie in fullscreen.  Did all this for 30 minutes and no crashes.  I also downloaded an app to monitor the temps inside the computer and the expansion bay stays at 41 degrees.  No clue what it was before but obviously it was hotter than that.  So my problem is solved!  Funny that 10.7.5 made the card work harder.  I wonder if its off loading some CPU stuff to the GPU for processing more than 10.7.4 so its just working a bit harder and so it heats up faster....

  • Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Hello jared1915
    If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • HT4623 The software update option is not on my phone.  It just goes from "about" to "usage".  I have an iPhone 3G.  Every time I try to update it on iTunes, nothing changes.  I have version 4.2.1, no matter what I do.  Any suggestions?

    I have an iPhone 3G, and cannot update my iOS.  In the General tab, "Upadate Software" is not even there.  It just goes from "About" to "Usage".  When I try to update on iTunes, it always remains the same.  iOS 4.2.1.  Any suggestions?  (My PC uses Windows XP).   Also, my WiFi has completely quit working.  Works fine on the other iPhones in the house, as well as the XBox 360, so I am sure it's my phone.  I tried everything I could think of, including restoring the iphone to factory settings & then updating, but no luck.  Thank you! for any help you can give!  I plan to get an iPhone 5, but wasn't ready to do it quite yet.  Hopefully my phone can be rescued until I'm ready.

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • Hi when I stream video content to my Tv using Apple from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help

    Hi when I stream video content to my Tv using Apple tv from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help would be most welcome.

    Welcome to the Apple Community.
    Contact the developer of the Air Video app.

  • My computer screen goes from grey to black on startup and stays there. Can any one help me?

    Hi there,
    I was wondering if anyone can tell me what is going on with my Mac Pro. The screen is blank or black. When I reboot, it goes from the grey startup screen to black and nothing after that. HELP.

    You don't say which year it is, but if it's a 13" you're not having a common GPU that some 2010 and 2011 15" models are having.
    Since reinstalling the OS didn't help, I'm afraid that the only real choice you have is to take the machine to your local Apple Store or an AASP and have them run diagnostics on the machine. It's likely a screen problem, rather than a logic board problem (although that's always a possibility).
    The testing is free as if the estimate for repair. There's really nothing else you can do yourself at this point.
    Sorry,
    Clinton

  • My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

    My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

    Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
    You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
    I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
    Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
    Thanks. Hope my other question has an answer out here.
    Paul H

  • Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes  I'm getting cut edges in the video , does anyone have any idea ?

    Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes  I'm getting cut edges/lines  in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
    does anyone have any idea ?
    Thanks in advence ...

    Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
    For now, I'll assume you're shooting 1080i.
    Take a representaive clip  into a new sequence. Add a title.
    In your sequence, make sure field dominance is set to Upper.
    Set render settings to Pro Res 422.
    After rendering, export QT self contained.
    Import into Compressor (I'm now referring to v3.5).
    Select the 90 minute Best quality DVD preset.
    Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
    Submit burn and check quality on TV.
    Good luck.

  • Battery going from 70% to 0% in seconds.

    I've been having a problem lately with my PowerBook going from a decent battery capacity to zero. Usually I am watching something on YouTube or another video. I've had my battery settings at "Better Energy Savings". I got a new battery during the recall...could it be my battery is on the fritz? My computer is working just fine save for the battery issue.

    There have been issues with the recall batteries not lasting a long time. One sign of a lithium battery on it's last legs is when it drops to zero without warning. Typically this happens below 50%, however, as opposed to yours dropping from 70%. You might try contacting either Apple support or your local Apple store to see if they would replace the battery.
    You've probably already read how to maintain the battery at http://www.apple.com/batteries/notebooks.html

  • IPod Touch Goes from 100% Charge to 20% within minutes

    My iPod Touch is a little over two years old.  It is now going from 100% battery charge to 20% within minutes of usage.  However, when I plug it in to charge, the battery shows that it almost fully charged.  Yet when I unplug it, it will immediately say the battery is at 20% again.  Is the battery at it's end, or is this a different kind of issue causing the problem?

    First try to reset your iPod and if that does not work, try restoring it to a backup and finally to factory settings.  If that does not solve the problem, your battery is probably a goner.  Two years is short, but not unusual; my battery failed after a little less than two years.  Apple will replace your iPod with a refurbished one for $79 (USA) or you could do a Google search on "replace iPod battery" for a local or on line repair place that will replace the battery for less. You can even find a replacement battery (same search) and install it yourself if you're up to it.

  • My ipod touch keeps going from low battery to start up and it just repeats

    Okay i have a 3rd generation ipod touch and it keeps going from low battery charge page to a apple logo what do i do here?

    Try the standard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    You may have a hardware problem like a dead battery.

Maybe you are looking for