Startup hangs at "Loading: ClusterManager ..."

Hi
On our EP6.0 with SP2 and Patch3 id did update to Patch 4 Hotfix 8. The installation claimed to be successfully. But after a reboot, the Portal hangs by "Loading: ClusterManager ..." for ever. I can not find anything on a log file which would explain this error.
Does anyone know what to check?
Posts from other users in this forum with more or less the same error did not work in my case
Thank you very much
Marco

Hi all
Thank you all for your replay.
Indeed, it took even about 20 minutes to see any activities in the file config.0.trc.
So it seems, that you have to be patient and not become nervous to early...
We have the portal now on patch 5 and facing heavy performance problem since then.... does someone made the same experience?
regards
Marco

Similar Messages

Startup hangs on "Loading ExporterQuickTimeHost.prm"

A bit of Background - It's been a week now since I got my Windows 7 (64 bit) system back after being attacked by the "Windows 7 Repair" Malware (Let in by the free Windows 7 Antivirus programs, gone back to using Norton which got rid of the Malware)
But my system is still not working right. In particular Adobe CS5 Premiere Pro 5.0.3 can't get past the the loading screen and just shows "Loading ExporterQuickTimeHost.prm" and sticks there for ever. Now I've read this thread on here and followed the advice on http://www.plee.me/blog/tag/exporterquicktimehost-prm/and allowed Premiere Pro, Adobe QT32 Server.exe and dynamiclinkmanager.exe access via my Firewall programme which is the standard Windows 7 program.
But Premiere Pro still it does not work. I even reset the Firewall so that all programs would need to ask permission again for access and even that did not help. I've turned off the firewall and Norton and that failed to help too, installed latest QuickTime 7.6.9 and no help either. But when I created a new user profile then Premiere Pro loaded just fine!
Premiere has run fine on my system for 10 months, it is only since I had to restore Windows back 2 days to a previous System Restore point that this has happened. It would be a lot of work to transfer all my files and software over to a new User Profile and so I wondered if anyone had got any other tricks to try to get Premiere to get past this permissions problem with QuickTime 7.6.9 as it obviously does work there is just some setting wrong in my old profile.

Quit, delete the preferences folder, and then restart.
The preferences folder is here: <drive>\Users\<username>\AppData\Roaming\Adobe\Adobe Premiere Pro\
Also, be sure to run as administrator. You can right-click the Adobe Premiere Pro program icon and choose to run the program as administrator in Windows 7.
You should also check out these troubleshooting tips for QuickTime issues:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html
That was written for After Effects, but the same things apply to Premiere Pro.

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

SAPJ2EE Hangs at "Loading Cluster Manager"

We applied patch4 for EP 6.0 SP2, coming from 6.0.2.3.7 . The patch 4 install completed successfully as noted in sapinst_dev.log . When starting up the portal via the dispatchers go script, the portal hangs at "Loading Cluster Manager".
The TRACE.log file under .../cluster/dispatcher/managers/log/cluster continually erroring off with the following message:
2004-08-02 12:20:38 | ClusterManager | TRACE | unknown | unknown |
ID000473: Can't connect to localhost:50060.
a netstat -an does not show anything attempting to use port 50060, which should be the state controller.
Anyone seen an issue like this?
HPUX 11.11 - pa-risc
HP JDK 1.3.1.13
SAPJ2EE Engine 6.20 patch level 23

Is the R/3 Start-up Framework service enabled? Often times this will conflict with the start-up when starting the portal using the go scripts.
Kyle

Extension Manager CS6 hangs on "Loading Extensions" and I cannot uninstall it.

Hello,
I've been having trouble with extension manager cs6 for about two days now, trying to apply patches to it to make it run more smoothly and stop hanging on "Loading Extensions". I have looked through these forums and they suggested that I remove all mxi files from a subfolder called "EM Store", but I cannot find a EM store under the proper location. I also cannot uninstall extension manager from my control panel, as it does not show up. I am just trying to get keyframe caddy for Adobe Flash, but I cannot get it without extension manager which is a giant pain. I've seen other people post both of their log files, but I think that just makes these forums impossible to find any real answers, as the majority of it is the log file. Please help asap, as I need this project that I am doing to be done fairly quickly.
Short story:
1. Manager hangs at "Loading Extensions"
2. Tried patching with updates, did not work
3. Tried finding the two subfolders, cannot find them at all in proper location
4. Cannot uninstall it from control panel
5. Need Help asap

You should delete EM Store and Database, then try again, you can find these folders under following path:
Current Machine's Extension Manager CS6 folder: C:\ProgramData\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
Current user's Extension Manager CS6 folder: C:\Users\<your_user_name>\AppData\Roaming\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
For the 'AppData' is a hidden folder, you could follow this guider (http://www.bleepingcomputer.com/tutorials/show-hidden-files-in-windows-7/) to unhidden it

Windows 7 install hangs while loading

Been trying to install Windows 7 64 to my MBP through Boot Camp, but it hangs when loading files from the DVD. It'll get through the progress bar saying "Windows is loading files..." but then stops after that.
Any ideas on what to do?

One of the reasons Windows 7 might have trouble, is where you are forced to delete and create NTFS out of the FAT/MSDOS partition that BCA creates.
Second, Windows 7 may assume that one of the 128MB or 200MB partitions on there (EFI at the end of each HFS volume and GPT head) look like FAT; Windows 7 creates a 100MB System Recovery partition. It may try to use those instead of taking it from the BOOTCAMP partition.
XP discs could vary and some versions would wipe out Mac OS, not even ask for where to put Windows, for no rhyme or reason, even XP SP3. Of course that means having a backup is doubly important.
Windows 7 64-bit is only "officially" support on some Macs, which doesn't mean it can't or won't, only that may have extra steps, may get an extra "Select 1 or 2" option due to its own EFI menu on Windows DVD.

Power mac G4 - Startup hangs at gray screen

Hello all,
I have a Power mac G4 - mirrored drive door model. 512mb of RAM; 833mghz - about 50+ gigabytes of storage remaining.
I recently starting using this mac again, here is what happened:
Power mac G4 was running 10.2.1 - had never been updated; it also was capable of running classic os9 (even though I never used it)
Started using machine again a few weeks ago; let "software update" install 10.2.8 update - everything worked fine
Put computer into target disk mode to transfer files to my new macbook pro (13") - using firewire connection
While trying to connect (migration assistant) - window froze will calculating the amount of space that the "user" on the power mac totalled - power mac appeared to be frozen
Did a hard reset / power down of the power mac G4
Upon restart, power mac G4 goes through all start up functions up to gray screen with apple logo (with spinning wheel) and then goes to a darker gray screen (without the logo) and spinning wheel
Dark gray screen with spinning wheel hangs indefinitely - I've let it stay there for hours on end hoping it will resolve but it doesn't
Here's what I have done so far:
Placed power mac G4 into target disk mode again in conjunction with macbook proI can see all the files on the power mac G4 (and have already copied them to the macbook pro) - so I don't think the hard drive is damaged
Disconnected all non-apple peripheral devices - only had a card installed in the back - but took that out - issue persisted (did not replace card in back)
Removed one non-apple RAM stick - issue persisted
Replaced non-apple RAM stick and removed apple RAM stick - issue persisted
Reset PRAM
Started computer in single-user modeused fsck and tried to have system check/fix issue; no matter how many times I re-run the command to repair it never comes back with a message saying no issues found - instead it keeps returning with a message saying that the issue was repaired "system modified"
Started computer in verbose modestartup seems to hang when this appears:
"/System/Library/CoreServices/loginwindow.app/Contents/MacOs/loginwindow: (ipc/send) invalid destination""LayState: cannot map display interlocks."
"/System/Library/CoreServices/loginwindow.app/Contents/MacOs/loginwindow: kCGErrorFailure: CGSNewConnection""Cannot connect to server"
"/System/Library/CoreServices/loginwindow.app/Contents/MacOs/loginwindow: kCGErrorInvalidConnection""Connection called with invalid connection"
Tried re-installing with system discsThe only discs I received with the power mac G4 when I purchased are orange and say "SSW version 8.6" on it" ("iMac Software Restore" and "iMac Software Install")
Computer does not respond when holding down "C" key at startup with either disc in the drive
When holding down "option" key at startup, the computer shows the bootable choices as ONLY the internal HD - not either of the CDs I mentioned above; I wonder if it no longer recognizes the original CDs because I updated to 10.2.8 from 10.2.1 before the issue?I also have an install disc for OS X 10.4.7 - for a friend's iMac (G5)
When holding down "C" key at startup with the OS X 10.4.7 in the drive I get a kernel panic
When holding down "option" key at startup, the computer shows the bootable choices as the OS X 10.4.7 in the drive AND the internal HD
When I choose the OS X 10.4.7 in the drive I get a kernel panic
When I choose the internal HD the startup hangs at the gray screen I mentioned above
At this point, I don't know what else to do. I believe the computer is still good because I can see everything on it when I put it into target disk mode; it just refuses to make it through the startup/login process. I have read discussion threads that suggest re-installing the OS using another computer - but I don't know how to do that. I also wondered if there was a way to tell the computer to re-install the software using the original CDs - but from the command line (in single-user mode)?
Someone - PLEASE HELP!

Sorry, SU Single User Mode, OF Open Firmware as these 2 where mentioned before.
As a test, let's try disconnecting the HD & see if it booys to any mode without it attached.
It could be the User's files or login messed up, if you want to try something a little more desperate...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
It'll boot like a newly setup Mac, but all your stuff should still be there once filling out the stuff.
Except you could just use Target mode and move or rename that file.

9.2.0.1.0 install hang at loading product on windows 2000 server SP4

When I am trying to install Oracle Enterprise server 9.2.0.1.0 on a Windows 2000 server SP4 freshly installed
The OUI hang when loading product @ 91% on the "File Location" screen !
This is not the symcjit.dll prob with P4 computer because I have upgrade the P4 motherboard drivers and I have tried the solution which is to rename this file and it is not working
Any URGENT idea ?
Thx

I have installed 9i successfully on machines with AMD64 cpus and 64bit Xeons without any problems.
Cheers,
R

After syncing Firefox with my Android phone, Google calendar is not functional. It hangs on "Loading" and will not allow updates or edits. Calendar works in IE, just not Firefox on any computer. Clearing cookies and cache no help.

I synced Firefox with my Droid Razr Maxx Firefox. Now Google Calendar hangs on "Loading" and will not function. Clearing cache and cookies does not help. Works the same on any computer Firefox. But Gmail works fine and Calendar is okay under other browsers.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

27" iMac startup hangs freezes

I have a 27" iMac and am having trouble starting up. I get the startup chime but the startup hangs or freezes and the iMac tries to restart again after a little while.
So I tried starting up from a Techtools CD in the external drive (there is no internal CD drive on the iMac). Unfortunately the iMac would not start from the CD and the CD is now stuck in the external drive. I was able to eject the CD by holding down the mouse button or trackpad while restarting. I tried starting up from an OS X 10.6.3 install DVD but it didn't seem to read it while holding down the C key at startup.
I tried a PRAM zap (holding down the Option + Cmd + P + R keys for two or three chimes) but the startup still hangs freezes.
I tried starting up holding down Cmd + S to boot Unix but I don't really know Unix so only entered exit.
I tried starting up holding down Cmd + R which I think is the recovery system but the startup still got stuck.
Holding down the Shift key while starting up brings up the "safe mode" and a grey bar which didn't fill before it disappeared and the startup froze.
Holding down the Option key while starting up brought up the hard drive to select as the startup disk but startup still hung.
Any ideas or help would be much appreciated.
Thanks

Thanks for getting back to me quickly.
I get the startup chime when the iMac starts up, the little daisy goes around a few times but then gets stuck. The iMac will shut itself down and continue to try to restart.
Holding down Shift during startup brings up the safe mode grey bar on the bottom of the screen but this fills only to about one-third before the startup freezes.
I tried starting up holding down the C key with a OS X 10.6.4 (Snow Leopard) install DVD in an external CD/DVD drive but just as you said, it would not boot from that.
I tried holding down the D key at startup to perform the Apple Hardware Test. Even the extended test did not detect any hardware problems.
Holding Cmd + R during startup would not start the recovery mode for me. However, holding Option down at startup did give me the choice of the Recovery 10.8.2 partition. Unfortunately, this froze as it was starting up too.
So I tried your suggestion of holding down Opt + Cmd + R to boot from Apple's remote servers. This started up but even then froze too.
I think you might be right that it could be a logic board problem. So I will take it in for repair.
Thanks Ralph, I much appreciate your help with this.

PHP Startup: Unable to load dynamic library './oci8.so' - ./oci8.so:

I have oracle 11g, php5, and apache2 are running on server(A). One of my php application need to connect Oracle 10g on server(B). so I have to configure PHP5 and OCI8. Here is what I have done.
#env
ORACLE_SID=demo
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1
LD_LIBRARY_PATH=/u01/app/oracle/product/11.1.0/db_1/lib
TNS_ADMIN=/u01/app/oracle/product/11.1.0/db_1/network/admin
## PHP configured
#./configure prefix=/usr/local/php5 with-apxs2=/usr/local/apache2/bin/apxs --with-oci8=/u01/app/oracle/product/11.1.
0/db_1 enable-sigchild with-config-file-path=/usr/local/apache2/conf
##OCI8
./configure -with-oci8=shared,/u01/app/oracle/product/11.1.0/db_1
Then I add "extension=oci8.so" on the php.ini file (/usr/local/php/conf/php.ini)
## Here is a problem
# php phpinfo.php |grep oci
PHP Warning: PHP Startup: Unable to load dynamic library './oci8.so' - ./oci8.so: cannot open shared object file: No such file or directory in Unknown on line 0
oci8
oci8.default_prefetch => 10 => 10
oci8.max_persistent => -1 => -1
oci8.old_oci_close_semantics => 0 => 0
oci8.persistent_timeout => -1 => -1
oci8.ping_interval => 60 => 60
oci8.privileged_connect => Off => Off
oci8.statement_cache_size => 20 => 20
OLDPWD => /usr/local/apps/oci8-1.3.4
_SERVER["OLDPWD"] => /usr/local/apps/oci8-1.3.4

what is your OS?
Under Fedora 9 I used :
locate oci8.soI had to use yumex to install a bunch of php files (pecl and phpize) that had the programs to dowload and install oci8.
Another post has the instructions! Search on phpize or pecl
in /etc/php.ini put :
extension=oci8.so

Windows 7 Professional PC hangs at "Loading files" when trying to boot with custom capture image on Windows Deployment Services.

I have created a custom capture image in WDS. Now when I try to boot my reference PC into this image the PC hangs at "Loading files". The reference PC is running Windows 7 and I am using Windows Server 2012 Standard on my server.
I have followed the instructions on how to create the custom capture image on the server to a fault. I PXE boot the PC and it shows the capture images after I hit F12. The problem is that it starts to boot and then hangs about 2/3 way through the progress
bar.
Any help would be appreciated.

Hi Derrick Logan,
We need know the detail phases your client hang, if it is irregular status, please collect the WDS log then post it. You can refer the following similar thread solution first.
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625/en-us
Windows is loading files... Hangs on WDS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baacadc4-830d-43e1-ace8-3292e886958e/windows-is-loading-files-hangs-on-wds?forum=winserversetup
WDS hangs at "Windows is loading files..." on a LAM jhl91 laptop
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ebb6e0b-9f05-4fee-b3c0-129c34bb879d/wds-hangs-at-windows-is-loading-files-on-a-lam-jhl91-laptop?forum=winserversetup
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Prevent Startup Form from Loading using Command Line Arguments

Hi there
I'm developing a VB.NET windows forms application in VS2013.
The application will have 2 ways of being executed, one being by the user manually and the other being automated by the task scheduler.
When executed by the task scheduler, command line arguments will be used so that the application is aware that it is being run automatically and not by a user.
My problem is that I want the startup form to load when run by a user but I don't want it to load when it is run automatically, I just want to execute code.
Is it possible to prevent the startup form from loading by using the commandline arguments from the MyApplication_Startup event?
Cheers

Hi Aureuz,
>>Is it possible to prevent the startup form from loading by using the commandline arguments from the MyApplication_Startup event
It is impossible to accomplish it in the MyApplication_Startup event, we can use Form.Shown event:
#Form.Shown Event
http://msdn.microsoft.com/en-us/library/system.windows.forms.form.shown(v=vs.110).aspx
If we start a form by using the commandline arguments, the count of CommandLineArgs will be above one, if so, use Me.Hide() method to hide this form.
Private Sub Form1_Shown(sender As Object, e As EventArgs) Handles MyBase.Shown
Dim args As String() = Environment.GetCommandLineArgs()
If args.Count > 1 Then
Me.Hide()
Else
Me.Show()
End If
End Sub
You can also uncheck "Enable application framework" on the project properties application tab and select your startup object to a module object:
Module Module1
Sub Main()
Dim args As String() = Environment.GetCommandLineArgs()
If args.Count > 1 Then
'Run your background code
Else
Dim f As New Form1
f.ShowDialog()
End If
End Sub
End Module
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Video app hangs on loading iTunes Library through Home Sharing

Hello,
On my 4th gen iPad I try loading my iTunes Library, which is on a mid-2011 iMac. Home Sharing is configured and working, but when loading my library it hangs during load. See attached screenshot. The library is huge, but that shouldn't be a problem right?

Hello,
On my 4th gen iPad I try loading my iTunes Library, which is on a mid-2011 iMac. Home Sharing is configured and working, but when loading my library it hangs during load. See attached screenshot. The library is huge, but that shouldn't be a problem right?

Outlook 2010 Hangs at Loading Profile

We just updated our network with all Server 2008 R2 servers, Exchange 2010, and Office 2010 Pro. We have isntalled Office 2010 on all machines and all has been working fine for the last 2 weeks. Over the last 3 days, we now are having some problems with
when Outlook is launched, it hangs on "Loading Profile" and does not go any further. I have tried killing the "Agent" process that this creates as suggested in other forums. I have run repairs, and un-install/re-installs which seems to temporaily fix the problem.
Most the clients are up-to-date with the Office updates. I have also un-installed SP1 on a couple machines which again works for a bit then the next time the user restarts the computer Outlook hangs again.
This is getting extremely frustrating as I have another thread with some other Office problems. Thanks for the help in advance.

I had the same problem. I tried all the posted solutions without success...new profile, reinstall, reset nav pane, safe mode, killing processes, stopping add-ons, etc. I found the same solutions repeated ad nauseum on website after website.
Finally after much experimentation I found this solution.
1. Export the registry key containing your profiles at HKCU>Software>Microsoft>WindowsNT>CurrentVersion>Windows Messaging Subsystem>Profiles. This is just a precautionary measure.
2. Stop all optional start-up programs from running on boot.
3. Kill and uninstall all search programs, such as Google desktop and Copernic.
4. Delete the registry key above.
5. Create a new profile using the Control Panel>Mail tool. Include an email address. I had to do this twice before it would save the new profile...it only works if there are no profiles in the registry.
6. Start Outlook in safe mode.
7. Manually move your old messages from the old pst file(s) to the new one. I had 1.5 gigs of mail to move, so it took a while.
8. With your messages backed up, delete the old pst file(s). Move any other old pst files out of the Outlook files folder. Don't ask me why this worked, but it made the difference.
9. Start Outlook with the new profile. At this point, Outlook started very quickly and without problems. I hope it works for you.
10. Update the programs with the relevant add-ons. iTunes, McAfee, Sugar Sync, etc. all had add-ons in the Outlook start-up list. My Sugar Sync add-on was causing problems.
11. With Outlook running, reinstall your search program if you had one, using the latest update. For me it was Copernic that was the problem. It was set to index Outlook messages, but it was corrupted and had to be reinstalled.
11. Use msconfig to selectively reboot. I did this several times to make sure that no other programs were conflicting with Outlook. It took forever, and the results were negative, but it seems prudent.
This solution took me many boring and frustrating hours to work out. In the end, it was an outside program that was the problem. I hope this helps you.

Startup hangs at "Loading: ClusterManager ..."

Similar Messages

Maybe you are looking for