Startup in sleep mode

Push 'on' button and goes to what looks like sleep mode- will not turn off with power button.
I did change the battery inside and pushed reset. After that, it started correct three times and next time went back to the problem.

Take a look at this article on "won't turn on"
http://docs.info.apple.com/article.html?artnum=303234
And maybe try to reset the SMC, instructions are here
http://docs.info.apple.com/article.html?artnum=303319

Similar Messages

  • White screen at startup, won't go on when exiting form sleep mode

    hey,
    Since a few months I have a game, it's called FlightGear, and it's a free game. But then I started having problems with my mac. Sometimes when I've played FG, and put my mac into sleep mode, and waked it up, is showed my desktop, could move my mouse, everything worked, but I cant open anything. And I hear a sound form inside my Mac. And when I turn my Mac off and put it back on, it only shows a white screen with the same sound. I've done checks to see if my disk was OK, and everything was fine. But this just keeps getting worse!

    Two different problems. The black screen when the computer runs fine usually means that the FL inverter or the LCD screen is defective and needs to be replaced.
    Not going to Sleep when the lid is closed is a setting under the Advanced settings in the Power Options you'll find in the Control Panel. With the Advanced Power Options, you can set the actions of closing the lid when using AC or battery power. 
    In my case, when the computer is attached to the power cord, it is also connected to a large screen monitor. In that case, I want the computer to do nothing when the lid is closed. But if I am running the computer on battery power, the LCD screen is my main screen and I do want the computer to go to sleep when I close the lid. This will save me power if I am on a plane, at a coffee shop or at a friend's.

  • MacBook Pro Stuck In Sleep Mode - Won't Boot

    LAPTOP
    2008 17" aluminum Macbook Pro running Snow Leopard
    SCENARIO
    I was using my laptop, closed the lid and took it to the office. Removed it from the laptop bag and it would not come out of sleep mode using mouse / keys. I hit the power button once (this has happened before and hitting the power button once has woken it from sleep mode). This did not help. I held down the power button for a hard reboot. The laptop shut off. Now I can't get it to turn back on.
    ISSUE
    When I hit the power button to turn it on:
    The SIL blinks twice slowly like it's in Computer Sleep state and then the laptop turns off.
    When I hold the power button to turn it on:
    The SIL blinks slowly once like it's in sleep mode, then stays solid and dim for 4 seconds, then blinks very fast for 2 seconds, then goes dark for a second, then blinks slowly once more like it's in sleep mode, then the laptop turns off.
    In both instances, I can hear the dvd drive begin to spin immediately after hitting the power button. Also, when I put my ear to the laptop, I can hear the hard drive start up before the laptop shuts off.
    TROUBLESHOOTING
    I've tried the following. All resulted in no change.
    - Reset PRAM / NVRAM
    - Reset SMC
    - Checked RAM was installed correctly, wasn't jiggled loose for some reason
    - Boot laptop with power cable, no battery
    - Boot laptop with battery, no power cable
    - Boot laptop with power cable and battery
    - The above 3 boot scenarios with PRAM / NVRAM reset and SMC reset
    RESOURCES
    Intel-based Mac: Startup sequence and error codes, symbols
    http://support.apple.com/kb/HT2674
    Mac computers: Sleep Indicator Light behavior
    http://support.apple.com/kb/TS4167
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    I just purchased my second fresh battery for this machine and cannot afford an entirely new laptop right now. Any help is greatly appreciated. Thank you so much in advance.

    Did you figured something out ? Mine, of similar age, started behaving the same yesterday. Since I replaced most of the original devices, I suspect the onboard clock battery being depleted by now... ? I'm not even sure there such a battery in there.

  • My macbook is two and half year old, going to sleep mode randomly

    Having used this Macbook for almost two and half years, my machine has suddenly generated the problem of going to random sleep. It started as an infrequent thing, then it started happening on a regular basis, to the point that it became almost impossible to work with it. When the computer goes to sleep mode, it doesn't wake up with any key, it has to be woken up by pressing the power button lightly.
    Here are the steps I took:
    1. The normal thing I did was search Apple Forum and then reset SMC, PRam, then changed energy saving options, everything. Nothing worked.
    2. Ran the hardware test and no problems found.
    3. Ran the Macbook with all options: with just the battery, without the Magsafe connected, with Battery and Magsafe connected together, with battery removed and the computer running on Magsafe only. Random Sleep continues
    4. Thought must be a connection issue and ran to Apple Store in Kolkata, India, thinking that it could be a connection issue with the sleep-mode cable. Apple Store kept the Macbook for seven days, saying that they needed to check the machine, returned it on the seventh day saying that the machine was fine and charged me Indian Rupee 1,500/- (about $ 34). I came back home and the problem persists.
    (Here I would like to add that Apple Service in Kolkata *****, probably ***** all over India, simply because Apple is not a major player in this country. The service engineer at Apple Store was at a loss with my problem and after seven days could only say, "We have done our internal tests and found no problem with your Macbook." When I asked about the Sleep Mode sensor connection, he said, "That is working fine, we have checked that.")
    5. After coming back home, I faced the same problem, this time with lesser time gap. It would go off to sleep every one minute or so. I decided to set my computer on "never to sleep mode" in the enery saving option. Alas, that didn't help either.
    6. I redid the hardware check, only to find that my computer hasn't detected any hardware problem.
    7. Now, as a previous Windows user, I thought that the problem must have been with the OS. So, at the risk of losing all my files, I decided to reload the OS. (My original OS DVD was Leopard, but it was later upgraded to Snow Leopard by the vendor free of cost). I took backup in Time Machine, and backed up the documents in another Disk and reloaded the OS. All seemed fine so far, for about 10 minutes. I was now confident that finally I could solve the problem and was then planning to migrate my previous files to my newly loaded OS-X. Alas, I was wrong. Before I could connect the external HDD to my computer, my Macbook went back to its previous trick of falling asleep.
    I'll definitely take back my Macbook to Apple Care tomorrow, but with my experience here in Kolkata, don't know whether they would be able to solve anything. Last time I had to show them the posts in Apple Forum to prove that Random Sleep is a problem that happens to Macbook.
    PS: My Macbook is with aluminium body bought in January 2009. Out of warranty. My optical drive conked off long ago (after about 15 months or so after I bought the Macbook) and I live with an external drive.  

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Power Mac G4 sleep mode issue using 10.5.8

    Hello All,
    If this is posted in the wrong discussion room, let me know.
    I have a problem and I am not sure what to do at this point. For reference to understand the problem, I have a Power Mac G4 Dual 1.25Ghz MDD 2003(No FW 800) with an Apple Cinema Display. I also have a USB 2.0/FW 400 PCI card installed. I use this card to connect my external HD's.
    The problem I am having is that the machine does not fall asleep properly using Leopard. When I manually put the computer to sleep, the monitor and external HD's shut off, but the fan stays on. When I try to wake the computer by hitting keys on the keyboard or moving the mouse, the computer will not wake the monitor or the External HD's. Furthermore, it freezes the computer when it is in the mode and the only way for the computer to function again is if I restart.
    Until a month ago, I was running Tiger, 10.4.11, on my machine and had absolutely no problems with sleeping my Mac. I decided to go to Leopard, 10.5.8, and used the clean install option. I then used migration assistant to grab all my data and settings from a backup using Carbon Copy Cloner.
    Using 10.4.11, I would usually let the computer sleep after 15 minutes of idling. Now, under 10.5.8, the computer freezes after the sleep mode is attempted.
    At first I assumed that the computer was preparing itself to sleep and might take a while. I decided to wait it out to see if the computer would eventually fall asleep. I waited an hour but the computer maintained the same status with the fans blowing and the front power button light staying lit. And, of course, the keyboard and monitor were not responding.
    I read some forum discussions that suggested to people with similar problems to consider removing anything connected to the PCI card. It was suggested that the HD's were keeping the computer awake. I tried removing each HD one at a time to see if it was a particular HD causing the problem. With each configuration that I tried to put the computer to sleep, the same result occurred.
    At this point, I am at a loss. I love my PowerMac and don't feel the need to upgrade as my most of my needs are met with this machine. This problem is not a deal breaker for me, but it is an annoying to have to restart after leaving the computer for a while. I know the other option is to shutdown and startup each time I leave the computer for any timeframe longer than 30 minutes, but is annoying and I don't know how bad it is for the computer to be shutdown and started again so frequently. If there is a fix to take care of this problem, I am willing to try it.
    Any advice would be appreciated.
    Thanks in advance,
    Maverick

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • IMac taking ten minutes to start up and sits at a blue screen for the most of the time. Also, when it goes into sleep mode I am unable to wake it up from it.

    For the past few days now whenever I go to turn on my iMac it takes roughly ten or more minutes to boot up. For the portion of this time it sits on a blank blue screen. At first it comes up to a plain white screen which after about 30 seconds has the apple logo on it and the spinning circle for about a minute then to the blue screen, every time. Then, to top it off right when this started happening another problem began occurring. The computer is set to go into sleep mode after 15 minutes of no use. But, if it is in sleep mode for too long I am unable to get it out and I have to restart the entire computer, but if it is just for a few seconds into sleep or a minute I am able to get the screen to come back. I can still here the fan running and such so I don't know what is going on. I have searched through discussion after discussion. I have tried: repairing disks, repairing permissions, starting up in safe mode, and such. There has been no luck so far. I was wondering if anyone could offer insight into fixing at least one of these problems since my schooling relies on the computer.
    By the way I this is an iMac 10.6.4 refurbished which we just bought about two weeks ago.
    Thanks for any suggestions!

    My iMac i7 quad was having the same symptoms with the blue screen and long startup times a couple of months ago.  Apple Care told me to bring it in to the local Apple Store, and after some diagnostics, the hard drive required replacing.  It took one day to replace the hard drive and my iMac is running great. I only had the iMac for about 12 months when the drive needed to be replaced.  Not sure if that is your Mac's problem, but it was for mine.

  • Lenovo s10 3t sleeping mode not working???

    I just received my lenovo ideapad 2 days ago and upgraded to ultimate.. my problem is , even before i upgraded it and it was on windows starter, whenever i put on sleeping or hibernate mode, it actually SHUTS DOWN? after putting/thinking it was on sleeping mode, i tried to turn it on again, hoping that it will go back to where it was before., then i realized, i have to go on the safe mode or start normally coz it said it didn't properly shuts down. BUT i didn't even shut it down.. i only put it on sleeping mode.. why is it so? anyone have the same prob? or am i pressing the wrong button (the power button) in order to turn it back on from the sleeping mode.. it really bugs me that it always kinda restarting when it is supposed to be asleep!!! i changed the power setting to having the sleep mode longer than an  hour and tested it within few minutes by putting on the sleep mode and try to put it back on, it still goes into computer not properly shut down ---> safe mode or start normally window thingy.. what is wrong here???
    HELP PLEASE.. thanks a bunch..
    Solved!
    Go to Solution.

    Hi and welcome, did you install Lenovo Energymanagement there are some points to configure...
    here an excerpts of my article... .. the settings .. way gettin in
    Energy Management -->advanced tab
    Section options  check Enable Hibernation check Auto adjust schemes according to battery power
    Sectionower buttons  When I close the lid of my portable computer  choose Stand By
    When I press the power button on my computer  choose Shut Down
    When i press the sleep button on my computer (Hint: on S-Series Fn-F1)  choose hibernation
    sincerely KalvinKlein
    Want more ? For further information to get the most of your S-Class machine
    Lenovo Energymanagement   Backup  Windows 7 Driver   Windows 7  Install
    Clean XP Install  XP Startup  Small WebCam Guide  Lenovo Easy Capture
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Startup and Sleep Issues 2.2 GHz, 10.6.6

    First, the specs: 2.2 GHz Macbook Pro, 4Gb installed memory. Currently running OSX 10.6.6.
    Symptoms:
    1: On startup, wait time from grey "Apple" loading screen to blue pre-login window screen is approx 2 minutes, then approx. 8 additional minutes for the login window to appear.
    2: If computer goes to sleep, it is unable to wake (put into sleep mode via closing, shortcut form apple menu, and optcmdejct). Instead screen remains black and front status light goes to a solidly lit but dimmed more than usual.
    What I've tried:
    Full archive and install of 10.6, repair permissions, repair disk (from 10.6 install book disk utility), hardware test (short and extended from original OS disk), Single user fsck, PRAM and SMC resets. Still nothing. I've looked at logs and removed any application that seemed to be hanging up at startup. I'm totally lost on this, and am now unfortunatly past apple care by about 4 months. Any advice at all would be VERY VERY APPRECIATED! I'll post my most recent startup log below.
    -Colin
    LOG:
    3/13/11 8:58:39 PM com.apple.launchd[1] * launchd[1] has started up. *
    3/13/11 8:59:08 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:08.707 sw_vers[65:903] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
    3/13/11 8:59:09 PM org.apache.httpd[31] httpd: Could not reliably determine the server's fully qualified domain name, using colin-mac.local for ServerName
    3/13/11 8:59:10 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 9 seconds
    3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:14.889 prlclientapp[67:1a03] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
    3/13/11 8:59:20 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 9 seconds
    3/13/11 8:59:21 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:21.702 prlnetstart[131:903] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
    3/13/11 8:59:23 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
    3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] Configuring en4...
    3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] No System Preferences changes required.
    3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] Configuring en5...
    3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] No System Preferences changes required.
    3/13/11 9:00:14 PM com.apple.WindowServer[93] Sun Mar 13 21:00:14 colin-mac.local WindowServer[93] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    3/13/11 9:00:26 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 8 seconds
    3/13/11 9:08:35 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds
    3/13/11 9:08:40 PM com.apple.UserEventAgent-LoginWindow[180] ALF error: cannot find useragent 1102
    3/13/11 9:08:40 PM com.apple.UserEventAgent-LoginWindow[180] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    3/13/11 9:08:40 PM com.apple.launchd[1] (com.wacom.wacomtablet[184]) Exited with exit code: 255
    3/13/11 9:08:40 PM com.apple.launchd.peruser.502[199] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 9:08:50 PM com.apple.launchd.peruser.502[199] (com.apple.Kerberos.renew.plist[222]) Exited with exit code: 1
    3/13/11 9:08:57 PM apsd-ft[240] APS daemon launched
    3/13/11 9:08:58 PM apsd-ft[240] Successfully got client identity
    3/13/11 9:09:08 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
    3/13/11 9:09:09 PM com.apple.SystemStarter[36] Starting Qmaster services
    3/13/11 9:09:09 PM com.apple.SystemStarter[36] Starting HP IO Monitor
    3/13/11 9:09:10 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
    3/13/11 9:09:10 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
    3/13/11 9:09:14 PM apsd-ft[240] <APSCourier: 0x106731a70>: Received connected response OK
    3/13/11 9:09:43 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
    3/13/11 9:09:44 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 4 seconds
    3/13/11 9:09:44 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 4 seconds
    3/13/11 9:09:52 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 6 seconds
    3/13/11 9:09:52 PM com.apple.launchd[1] (0x101804850.mach_init.VersionCueCS2Daemon[320]) Exited with exit code: 1
    3/13/11 9:10:12 PM osascript[333] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
    /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
    3/13/11 9:10:20 PM com.apple.fontd[209] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)

    Gave it a shot, no luck. Thanks for the info. Here's the log directly after I restarted after trying the above fix. I added a line to show the startup obviously:
    3/13/11 11:02:27 PM kernel npvhash=4095
    3/13/11 11:02:27 PM kernel PAE enabled
    3/13/11 11:02:27 PM kernel 64 bit mode enabled
    3/13/11 11:02:27 PM kernel Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
    3/13/11 11:02:27 PM kernel vmpagebootstrap: 1021192 free pages and 19192 wired pages
    3/13/11 11:02:27 PM kernel standard timeslicing quantum is 10000 us
    3/13/11 11:02:27 PM kernel migtable_maxdispl = 73
    3/13/11 11:02:27 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    3/13/11 11:02:27 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    3/13/11 11:02:27 PM kernel calling mpopolicyinit for Quarantine
    3/13/11 11:02:27 PM kernel Security policy loaded: Quarantine policy (Quarantine)
    3/13/11 11:02:27 PM kernel calling mpopolicyinit for Sandbox
    3/13/11 11:02:27 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
    3/13/11 11:02:27 PM kernel calling mpopolicyinit for TMSafetyNet
    3/13/11 11:02:27 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    3/13/11 11:02:27 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
    3/13/11 11:02:27 PM kernel The Regents of the University of California. All rights reserved.
    3/13/11 11:02:27 PM kernel MAC Framework successfully initialized
    3/13/11 11:02:27 PM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
    3/13/11 11:02:27 PM kernel IOAPIC: Version 0x20 Vectors 64:87
    3/13/11 11:02:27 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
    3/13/11 11:02:27 PM kernel Sleep failure codAppleIntelCPe UPowerManagement: initialization complete
    3/13/11 11:02:27 PM kernel 0x00002000 0x14000000
    3/13/11 11:02:27 PM kernel mbinit: done (64 MB memory set for mbuf pool)
    3/13/11 11:02:27 PM kernel rooting via boot-uuid from /chosen: B2D6BDBB-4CD1-3327-BEF8-6BADB8B110E0
    3/13/11 11:02:27 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    3/13/11 11:02:27 PM kernel com.apple.AppleFSCompressionTypeZlib kmod start
    3/13/11 11:02:27 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
    3/13/11 11:02:27 PM kernel AppleIntelCPUPowerManagementClient: ready
    3/13/11 11:02:27 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHW2120BH Media/IOGUIDPartitionScheme/Customer@2
    3/13/11 11:02:27 PM kernel BSD root: disk0s2, major 14, minor 2
    3/13/11 11:02:27 PM kernel jnl: unknown-dev: replay_journal: from: 15467520 to: 1031680 (joffset 0x7d01000)
    3/13/11 11:02:27 PM kernel [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
    3/13/11 11:02:27 PM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001cb3fffe815b4e; max speed s100.
    3/13/11 11:02:27 PM kernel [Bluetooth::CSRHIDTransition] transition complete.
    3/13/11 11:02:27 PM kernel jnl: unknown-dev: journal replay done.
    3/13/11 11:02:27 PM kernel CSRUSBBluetoothHCIController::setupHardware super returned 0
    3/13/11 11:02:27 PM kernel hfs: Removed 28 orphaned / unlinked files and 0 directories
    ~~~~~~~~~~~~~~~~~~STARTUP~~~~~~~~~~~~~~~~~~
    3/13/11 11:02:15 PM com.apple.launchd[1] * launchd[1] has started up. *
    3/13/11 11:02:27 PM DirectoryService[11] Improper shutdown detected
    3/13/11 11:02:29 PM kernel systemShutdown false
    3/13/11 11:02:30 PM blued[17] Apple Bluetooth daemon started
    3/13/11 11:02:43 PM mDNSResponder[18] mDNSResponder mDNSResponder-258.14 (Nov 18 2010 14:18:32) starting
    3/13/11 11:02:43 PM com.apple.SecurityServer[23] Session 0x5fbff962 created
    3/13/11 11:02:43 PM com.apple.SecurityServer[23] Entering service
    3/13/11 11:02:44 PM configd[14] network configuration changed.
    3/13/11 11:02:44 PM configd[14] setting hostname to "colin-mac.local"
    3/13/11 11:02:44 PM mDNSResponder[18] Adding registration domain colinsheridan.members.mac.com.
    3/13/11 11:02:45 PM blued[17] writeExtendedInquiryResponse returned 26
    3/13/11 11:02:45 PM blued[17] writeExtendedInquiryResponse returned 44
    3/13/11 11:02:46 PM kernel Previous Shutdown Cause: 3
    3/13/11 11:02:46 PM configd[14] network configuration changed.
    3/13/11 11:02:46 PM awacsd[26] Starting awacsd connectivity-32 $Rev: 907 $ (Nov 6 2010 15:06:27)
    3/13/11 11:02:46 PM awacsd[26] Connecting AWACS client: colinsheridan hello.connectivity.me.com
    3/13/11 11:02:47 PM kernel Atheros: mac 12.2 phy 8.1 radio 12.0
    3/13/11 11:02:47 PM kernel NVDANV50HAL loaded and registered.
    3/13/11 11:02:47 PM com.apple.kextd[10] Can't load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/Kensingt onMouseDriverX1.kext - no code for running kernel's architecture.
    3/13/11 11:02:47 PM com.apple.kextd[10] Failed to load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/Kensingt onMouseDriverX1.kext - (libkern/kext) requested architecture/executable not found.
    3/13/11 11:02:47 PM com.apple.kextd[10] Load com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 failed; removing personalities.
    3/13/11 11:02:48 PM kernel Alesis Firewire CJ - 3.0.81.1080 - Jan 21 2008 16:04:46 - (c) Singing Electrons Inc. 2004-2007
    3/13/11 11:02:48 PM kernel DSMOS has arrived
    3/13/11 11:02:48 PM kernel AirPort_AthrFusion21: Ethernet address 00:1c:b3:b3:1b:8e
    3/13/11 11:02:48 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
    3/13/11 11:02:48 PM kernel RBIOKitController: started.
    3/13/11 11:02:48 PM kernel AirPort: Link Down on en1. Reason 1 (Unspecified).
    3/13/11 11:02:48 PM com.apple.kextd[10] Can't load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/VirtualM ouseX1.kext - no code for running kernel's architecture.
    3/13/11 11:02:48 PM com.apple.kextd[10] Failed to load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/VirtualM ouseX1.kext - (libkern/kext) requested architecture/executable not found.
    3/13/11 11:02:48 PM com.apple.kextd[10] Load com.kensington.mouseworks.driver.VirtualMouseX1 failed; removing personalities.
    3/13/11 11:02:48 PM kernel en1: 802.11d country code set to 'US'.
    3/13/11 11:02:48 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
    3/13/11 11:02:48 PM configd[14] network configuration changed.
    3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
    3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
    3/13/11 11:02:50 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[44] Login Window Application Started
    3/13/11 11:02:50 PM fseventsd[48] event logs in /.fseventsd out of sync with volume. destroying old logs. (3095 38 3198)
    3/13/11 11:02:50 PM kernel AirPort: Link Up on en1
    3/13/11 11:02:50 PM fseventsd[48] log dir: /.fseventsd getting new uuid: EE8CCE38-A733-4A68-9F6C-99D1501E3EBE
    3/13/11 11:02:50 PM com.apple.usbmuxd[35] usbmuxd-211 built on Jan 13 2011 at 04:20:21 on Jan 13 2011 at 04:20:21, running 64 bit
    3/13/11 11:02:52 PM org.apache.httpd[31] httpd: Could not reliably determine the server's fully qualified domain name, using colin-mac.local for ServerName
    3/13/11 11:02:52 PM Parallels[89] Loading kernel extension prl_hypervisor.kext
    3/13/11 11:02:53 PM kernel AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
    3/13/11 11:02:53 PM kernel AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
    3/13/11 11:02:54 PM configd[14] network configuration changed.
    3/13/11 11:02:54 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 6 seconds
    3/13/11 11:02:55 PM kernel yukon: Ethernet address 00:1b:63:98:39:54
    3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:02:58 PM kernel utunctlconnect: creating interface utun0
    3/13/11 11:03:00 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 10 seconds
    3/13/11 11:03:02 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 8 seconds
    3/13/11 11:03:02 PM Parallels[103] Loading kernel extension prlhidhook.kext
    3/13/11 11:03:02 PM Parallels[109] Loading kernel extension prlusbconnect.kext
    3/13/11 11:03:02 PM Parallels[114] Trying to load kernel extensions, exit status: 0
    3/13/11 11:03:02 PM Parallels[117] Starting Parallels networking...
    3/13/11 11:03:02 PM Parallels[120] Loading kernel extension prl_netbridge.kext
    3/13/11 11:03:03 PM kernel /drv/ HypApic.c:234 Host APIC phy 0xFEE00000 lin 0x559a2000 ver 0x14
    3/13/11 11:03:03 PM kernel /drv/ HypRealCpu.c:189 hypRealCpusInfoInit: STATUS_SUCCESS
    3/13/11 11:03:03 PM kernel /drv/ HypLowCache.c:158 Low cache initialized (3904 kB for 8 VMs on 4096 MB)
    3/13/11 11:03:03 PM kernel /drv/ HypModule.c:178 Parallels IPI irq = 0 ipi = 0(0x0)
    3/13/11 11:03:03 PM kernel /drv/ HypModule.c:181 Parallels Hypervisor 4.0.3848.450204 loaded.
    3/13/11 11:03:03 PM kernel /prl_hid/ Parallels HID Helper started.
    3/13/11 11:03:04 PM Parallels[125] Loading kernel extension prl_vnic.kext
    3/13/11 11:03:04 PM kernel com.parallels.kext.prlnet 4.0.3848.450204 has started.
    3/13/11 11:03:05 PM kernel com.parallels.kext.vnic 4.0.3848.450204 has started.
    3/13/11 11:03:05 PM kernel comparallels_kext_prl_vnic_device0: Ethernet address 00:1c:42:00:00:08
    3/13/11 11:03:05 PM kernel comparallels_kext_prl_vnic_device1: Ethernet address 00:1c:42:00:00:09
    3/13/11 11:03:06 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
    3/13/11 11:03:06 PM prl_naptd[138] Starting Parallels Network Daemon
    3/13/11 11:03:06 PM prl_naptd[138] en4: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
    3/13/11 11:03:06 PM prl_naptd[138] en5: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
    3/13/11 11:03:06 PM configd[14] network configuration changed.
    3/13/11 11:03:06 PM configd[14] network configuration changed.
    3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] Configuring en4...
    3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] No System Preferences changes required.
    3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] Configuring en5...
    3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] No System Preferences changes required.
    3/13/11 11:03:07 PM Parallels[139] Parallels networking sucessfully started
    3/13/11 11:03:08 PM Parallels[142] Restarting CiscoVPN
    3/13/11 11:03:08 PM SystemStarter[144] Unknown service: CiscoVPN
    3/13/11 11:03:08 PM Parallels[147] Starting Parallels Dispatcher Service
    3/13/11 11:03:08 PM Parallels[151] Parallels Dispatcher Server sucessfully started
    3/13/11 11:03:09 PM kernel utunctlconnect: creating interface utun0
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: timed out waiting for IOKit to quiesce
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: Busy services :
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1 [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0 [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3 [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI/IOFireWireController [1]
    3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI/IOFireWireController/IOFireWireLocalNode [2]
    3/13/11 11:03:55 PM WindowServer[88] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    3/13/11 11:03:55 PM com.apple.WindowServer[88] Sun Mar 13 23:03:55 colin-mac.local WindowServer[88] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    3/13/11 11:03:59 PM com.apple.SecurityServer[23] Session 0x22e923 created
    3/13/11 11:03:59 PM com.apple.SecurityServer[23] Session 0x22e923 attributes 0x30
    3/13/11 11:04:03 PM loginwindow[44] Login Window Started Security Agent
    3/13/11 11:04:06 PM SecurityAgent[177] Showing Login Window
    3/13/11 11:07:56 PM /usr/libexec/hidd[47] Timeout waiting for IOKit to be quiet
    3/13/11 11:11:56 PM WindowServer[88] Timeout waiting for IOKit to be quiet
    3/13/11 11:12:01 PM SecurityAgent[177] User info context values set for colinsheridan
    3/13/11 11:12:02 PM authorizationhost[175] Failed to authenticate user <colinsheridan> (tDirStatus: -14090).
    3/13/11 11:12:04 PM SecurityAgent[177] User info context values set for colinsheridan
    3/13/11 11:12:05 PM SecurityAgent[177] Login Window Showing Progress
    3/13/11 11:12:05 PM SecurityAgent[177] Login Window done
    3/13/11 11:12:05 PM loginwindow[44] Login Window - Returned from Security Agent
    3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
    3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
    3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
    3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
    3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
    3/13/11 11:12:48 PM hdiejectd[259] running
    3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
    3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
    3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
    3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
    3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
    3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
    3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
    3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
    3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
    3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
    3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
    3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
    3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
    3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
    3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
    3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
    3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
    3/13/11 11:12:48 PM hdiejectd[259] running
    3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
    3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
    3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
    3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
    3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
    3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
    3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
    3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
    3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
    3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
    3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
    3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
    3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
    3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
    3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
    3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
    3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
    3/13/11 11:12:48 PM hdiejectd[259] running
    3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
    3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
    3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
    3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
    3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
    3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
    3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
    3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
    3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
    3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
    3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
    3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
    3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
    3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
    3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
    3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
    3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
    3/13/11 11:12:48 PM hdiejectd[259] running
    3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
    3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
    3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
    3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
    3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
    3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
    3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
    3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
    3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
    3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
    3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
    3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
    3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
    3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
    3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
    3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
    3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
    3/13/11 11:12:48 PM hdiejectd[259] running
    3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
    3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
    3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
    3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
    3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
    3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
    3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
    3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
    3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
    3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
    3/13/11 11:13:22 PM VersionCueCS2Daemon[313] warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
    3/13/11 11:13:22 PM VersionCueCS2Daemon[313] VCEnvironmentSetCWD() failed to set CWD to '/Applications/Adobe Version Cue CS2' <2>
    3/13/11 11:13:22 PM com.apple.launchd[1] (0x10041e2a0.mach_init.VersionCueCS2Daemon[313]) Exited with exit code: 1
    3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
    3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
    3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
    3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
    3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
    3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
    3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
    3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
    3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
    3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
    3/13/11 11:12:48 PM hdiejectd[259] running
    3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
    3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
    3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
    3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
    3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
    3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
    3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
    3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
    3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
    3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
    3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
    3/13/11 11:13:22 PM VersionCueCS2Daemon[313] warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
    3/13/11 11:13:22 PM VersionCueCS2Daemon[313] VCEnvironmentSetCWD() failed to set CWD to '/Applications/Adobe Version Cue CS2' <2>
    3/13/11 11:13:22 PM com.apple.launchd[1] (0x10041e2a0.mach_init.VersionCueCS2Daemon[313]) Exited with exit code: 1
    3/13/11 11:13:29 PM osascript[320] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
    /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
    3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
    3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
    3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console

  • Ibook won't wake up or crashes after waking from sleep mode

    I have now had this problem for the last year with my new ibook g4 and I can confirm that the problem is present at OS X version 10.3.0 - 10.3.9 and 10.4.0-10.4.5 . I'd manage to solve it but once in a while it shows up again and i have to solve it all over again. Apple doesn't seem to care although it makes your iBook totally unusable if you can't put it to sleep mode, because of the fact that you can't leave your iBook ON while the lid is closed. Ok as I said I have this problem once in a while but I allways manages to solve it, here are my observations:
    Leting the computer go into sleep mode by itself (not by closing the lid) will not result in a crash.
    Before a crash the following allways occour:
    1) The system gets highly unstable. Programs (mostly safari, mail and itunes) will crash without warning. The mouse reacts very slowly and lags behind. The mouse lag is a shure indication that the system will crash during the next seconds or minuts.
    2) While set to automaticly connect to favorite network, the airport won't connect imidiatly, but it will take a few seconds more than usual before it connects.
    3) The system sometimes crashes before it can activate the backlight resulting in the situation where people think that the system can't wake up from sleep mode and won't react.
    Only forcing the computer to sleep mode can cause this failure (by pressing "sleep mode" or by closing the lid).
    What i did to rule out some sources resulting in this error:
    1) Something like this problem can happen when having a bad memory socket or bad memory, so I'd ran Apples Hardware test and memtest OSX, but no failure was indicated.
    2) Ran the usual repair of disk permissions (like 10^6 times ), without any changes.
    3) Tried to reset the PMU (Power managing unit), without any changes.
    4) Also tried to make a clean installation with panther 10.3 and tiger 10.4, without changes. Before installing anything (no prgrams or updates) the system still crashes. Even after updating to. 10.3.9 and 10.4.5 the problem is still present
    The solution:
    Well I found out that the problem has to do with to power options. That would normally mean that reseting the PMU would help, but as I already said this didn't change anything. Apparently the system is not able to wake up the Harddisk from sleep mode, and that's basicly the problem. I don't understand why it doesn't crash when going to sleep mode all by itself, but aparently there's something diffrent by forcing the system to sleep mode. Fourthermore it's not so "happy" to change those settings for the harddisk (I will explain later).
    Solution:
    1) Basicly just UNCHECK the option "Set harddisk to sleep mode whenever it's possible" inside powermanagment. And set "let the computer go to sleep after" to "Never" , do this for Battery and AC Power settings.
    2) And put CPU usage to "Automatic", do this for Battery and AC Power settings
    3) Restart the ibook. When it plays it's startup sound reset PVRAM by holding the following keys down before the backlight turns ON: OptionCommand+PR , when you hear the startup sound again release the buttons and start OSX normally.
    Now as I said this problems comes once in a while and that has to do with the fact that repairing my disk permissions can change/reset the above changes. Even if it isn't beeing displayed graphicly repairing the disk permission have reseted those changes, resulting in the fact that the system is crashing again.
    So to solve this do the following for Battery and AC power settings:
    1) CHECK/MARK the "Set harddisk to sleep mode whenever it's possible" inside powermanagment and put CPU usage option the low or high. And set "let the computer go to sleep after" to "Never"
    2) Restart the ibook.
    3) UNCHECK the option "Set harddisk to sleep mode whenever it's possible" inside powermanagment". Put CPU usage option back to "Automatic". And set "let the computer go to sleep after" to "Never"
    4) Restart the ibook again. When it plays it's startup sound reset PVRAM by holding the following keys down before the backlight turns ON: OptionCommand+PR , when you hear the startup sound again release the buttons and start OSX normally.
    So now it doesn't crash again.
    I've read all the threads of people having this problem and apparently it has been present since OSX 10.0.0 and when calling apple support they tell you to reset PMU and repair the usual disk permissions, which of cause doesn' work. And there are aparently a lot of really angree costumers, because this problem makes the computer COMPLETLY unusable, but apple has done nothing to help those people because of the the fact there there has been released ZERO patches or changes in OSX to resolve this issue. I can't say that there is something wrong with the iBooks as the several hardware test's indicate no malfunctioning but there is some bug in Mac OSX wich specificly makes the system incable to tell some ibook's how to wake the harddisk from sleep mode.
    To the fine folks working on this forum: No I will not send this to apple, they already know about this, and have done nothing (just think of the millions of crash reports they recieve from those hundreds of crashes everybody is geting from this problem). That is why I put this on the forum so that people can actually solve this problem by themselves. If you think it's worth sending to apple, so that this problem can finally be fixed after 4-5 years you are more than welcome to send it directly to somebody who will actually do something about this. And i really hope that giving people the opportunity to make ther computer work, doesn't violated the usual rule "that we are not allowed to write anything that is agains apples interests", wich often results in a removal of threads and ANY chance in SOLVING critical errors.
    ibook g4 12", 512, 32 VRAM, 1.2 GHz   Mac OS X (10.4.5)  

    sdad sdsdds:
    Your observations and solution are right on the money!!
    I just was working on an iBook that my father is giving to my sister. I must have started the problem by changing the sleep setting for battery to let HD sleep. After that the fun began! Instability, restart after restart, running Disk Warrior, fixing permissions over and over, etc. I finally zeroed out the HD and installed 10.4. Nothing worked until I read your post.
    Thanks a lot. I understand how you feel about posting here, but please be aware that you are helping many people who would be completely without a clue otherwise. Thanks again for your efforts.
    Now I can ship my sister her iBook!

  • After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

    hello,
    after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
    the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
    The only "solution" is to restart my Mac.
    - SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

    I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
    My solution:
    Cold start with Command-v pressed.
    This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
    What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
    Maybe Cmd-v set open firmware params and fixed some corruption.
    Anyway: my mac mini works again.

  • T400 sleep mode problem

    Hi, I got my new T400 last week, prett happy. However, I found an annoying problem with T400 entering sleep mode. Randomly, it fails to go into sleep mode. It just hangs there with no response at all from keyboard and mouse, the "sleep moon" light doens't turn on either. I have to hold the power button to forcely shut it down and reboot. Quite annoying.
    I did some research on this forum, somebody suggested reinstall the Power Manager and its driver, I tried that and the problem remains. BTW, My video driver is also up to date.
    Then I called Lenovo/IBM Atlanta support team, and was told to try to update my BIOS. So I preceeded with that too. Because I have Vista64, I have to download an iso image and burn a bootable CD with Roxio Creator (preinstalled on T400), and changed the BIOS startup sequence to boot from the internal CD drive. Somehow, T400 couldn't boot from the CD I burned with the BIOS update iso image. So I am back to suqare one.
    Someone in this forum also suggested it might be a motherboard problem, but the tech rep I talked with didn't mention that.
    Any suggestions on this sleeping mode issue? Or if you could help with the bootable CD with BIOS update? Thanks in advance!
    (The BIOS update iso image is here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70351)

    svchw wrote:
    Then I called Lenovo/IBM Atlanta support team, and was told to try to update my BIOS. So I preceeded with that too. Because I have Vista64, I have to download an iso image and burn a bootable CD with Roxio Creator (preinstalled on T400), and changed the BIOS startup sequence to boot from the internal CD drive. Somehow, T400 couldn't boot from the CD I burned with the BIOS update iso image. So I am back to suqare one.
    Any suggestions on this sleeping mode issue? Or if you could help with the bootable CD with BIOS update? Thanks in advance!
    (The BIOS update iso image is here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70351)
    Sorry, I have to ask the usual iso burn question: are you burning it as a file, or as an image?  If your cd is readable under windows (or whatever) and has a file on it called xxx.iso, you probably used the wrong burn option.
    No offense, but this is the usual problem.  If you are already handling this, sorry about the noise...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Issue X200s and ultrabase : sounds beep in sleeping mode

    hello all,
    My problem consist in desactivation of beep sounds when i plug my computer Lenovo X200s in docking station after sleep mode. description of problem :
    -My computer is plugged in docking station,
    -I activate the sleep mode,
    -I undock my computer,
    -I dock my computer and push the start button.
    At this time, computer beep very strongly and the only one solution is to undock the computer.
    I just have this problem with the sleep mode.
    If i do the same with a lenovo T400, i don't have the problem. Anyone have an idea to stop this beep (i'm sure that is a security but we prefer no sound rather than this one!! ;-)
    For your information, I already check windows power settings and lenovo power setting but I dind't find anything!!
    Best regards;-)

    the option to enable/disable power-status-change beeps is in the BIOS of the X200... somewhere.
    press the Thinkvantage button at startup when the screen says it is suitable to do so, and then follow the on-screen instructions to access the BIOS.
    if you have configured a BIOS password, you may need to enter it.
    i am currently insufficiently motivated to shut down my X200 to look for the options menu location. if you need help, please ask and then i'll look for it.
    Thinkpads:
    Lenovo X200 - IBM T43p - Two IBM T41's
    No Longer Owned: IBM T22 - IBM A23

  • MacBook starts and instantly enters sleep mode

    In the past few days I've been experiencing a reoccurring problem with my macbook pro. I press the power button, hear the startup of the drive, and then sometimes the display will turn on for a second(mostly stays off), and then enters sleep mode instantly. I can not get on my macbook unless I turn it on and let it sit for 15-20 minutes, then MAYBE the display will activate. Please help.

    Do you hear a chime at startup? How do you know it is entering sleep mode and not turning off? Does the cursor move on the screen? Here is something from another user's experience:
    I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
    1. Shut the computer down by holding the power button for 10 seconds
    2. Restart the computer and press shift at the same time until you see the progress bar start moving
    3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
    4. After a moment, you should see the spinning beach ball
    5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
    Apparently it's an issue with an automatic update that never quite got past the login screen.
    MacBook Pro (15-inch, Mid 2010)- Intermittent black screen or loss of video

  • No screensaver and monitor sleep mode

    Hello guys,
    I have the following problem with my Mac Pro (Early 08) and MacBook Pro 2.33 GHz. Both are Mac OS X 10.5.4.
    I have installed the latest Security Update 2008-005. After installation both computers have similar problem with Screensaver and display sleep mode. Both simple don't start. I mean that my laptop and desktop computer don't start screensaver and after some time they don't turn off attached monitor (respectively built-in display).
    I also tried to change time of both things (screensaver time and "monitor sleeping mode" time) to different time. I also restarted both computers few times already.
    My laptop seems working after these "changes and restarts", but Mac Pro doesn't. Monitor is always on.
    Please, do you have any info regarding this? I am quite possitive it was caused by mentioned security update, since before that update, both worked perfectly.
    Thank you for any help.

    Welcome to Apple Discussions.
    Create a new account, name it "test" and see how your monitor and screensaver work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.4 Combo Update . This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj
    Message was edited by: macjack

  • IdeaPad B590A - dropped into sleep mode when lid was covered and requests a password

    Hello, dears! Sorry if I missed the section, I'm a newcomer
    I bought my Lenovo IdeaPad B590A with Windows 8 a week ago. Having used it a bit I happened to cover the lid. My notebook turned into the sleep mode. It requests a PASSWORD now, but I have no idea what password?
    Thus, now I have 2 screenviews upon Restart: 1) Screen with LENOVO sign and 2) screen with a profile photo (empty), the number " 1" and the line for a password. But I did'n created a password.
    Some people recommended that I use Restart and then press F8 button for a 'safety regime' opening for Windows. The problem is the notebook does not show the Windows screen - only Lenovo screen and Rquesting password screen.
    Is there any chance to remove this password request so that I could enter finally?
    I'd be grateful for any advice,

    Hi Ekaterina,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that your B590A Laptop is waking up on a Password prompt which you have not created, but let me inform you that without creating the password for the current user account the popup will not be prompted at the startup. As it is displaying password for a Single user, I strongly suggest you to perform OSRI (Operating System Re-Install) using OKR (One Key Recovery) by clicking on OKR button provided in the computer, below is the link to download the User Guide for the steps to perform OSRI and refer page no. 1 to locate the OKR button and page no. 27 for the steps to perform OKR.
    NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
    User Guide Lenovo B590
    Hope this helps!!!
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Transformer.transform(xmlIn, new StreamResult(out)) throws java.io.IOExcept

    Hi, While doing xsl transformation of xml, I am getting IO Exception in windows alone. The code looks like: import javax.xml.transform.Transformer OutputStream out = new ByteArrayOutputStream(); Transformer.transform(xmlIn, new StreamResult(out)); wh

  • How do I delete free game apps?

    How do I delete free game apps that my sons have downloaded?

  • Opening Console on a Mac OS Leopard using Firefox or Safari

    I am trying to open a Virtual Manchine's console on a Mac using Firefox or Safari. Either way I got a blank pop up screen, and nothing got loaded. I have tightvnc installed on the VM Manager. I could bring up the console on a Windows machine using IE

  • CS4 saved .tif files cannot be read by other programs

    I recently upgraded Photoshop from CS2 to CS4 (11.0.1). If I use CS4 to save a large multi-layered Photoshop .psd file as .tif (Layer/Flatten image/Discard hidden layers),  (File/Save as .tif, LZW, Interleaved, IBM PC) the resultant .tif file cannot

  • Upgrading For 7 to 8 any advice

    Hi Folks I've just ordered 8 and will be driving in at the deep end, I am just looking for any advice on upgrading to help with as smooth transition as possible, I have a good number of third party plugins, UAD, Powercore, PSP, RMX, Melodyne, and man