Startup key combinations for G5 PowerMac

I have a graphics card problem with my G5 PowerMac. It no longer powers up my monitor. I need to erase my hd & reinstall but...
The support people told me that if I connected the G5 to my iMac with a firewire cable I could get to my G5 hard drive. I thot they told me to hold down the "t" key while I turned the power on the G5 with the iMac already on. Its not working.
Anyone have a clue

Hello! You'll find the information for FTDM HERE.TOM

Similar Messages

Cant start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I ge

Can not start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I get to designating drive its blank. When I go to startup disk there is a "?" mark. When I restart under startup disk search for a drive it still comes up with nothing. Before I got the grey spinning wheel I had a locked screen. Could not move curser or click on anything. Finally just shut down. Thank you in advance for any help!

Shouldn't still have a 'beachballing'... if the drive is being found and the system is trying to boot from it but is having problems, I would suggest looking over ds store's user tip - Step by step to fix your Mac.
It's likely either something corrupt in your system files or a failing hard drive. But follow ds's steps until you find the cause of the problem.
Good luck,
Clinton

How to add a feild as key combination for existing condition table

Hi all,
please any body can inform me about how to add a feild as key combination for existing condition table ex 901 having the key combination of sales organisation and material
for this cond. table,how to add a new feild ex:price list
iam unable to add it in change mode of v/03.(even after removing this 901 table from Acc.seq.)
Edited by: rajendraprasad vasam on Apr 25, 2008 10:08 AM

mr.Rajendra
I you have the access key - you can copy the 901 table and create a new table along with your required field. v/03
Or
in the access sequence for the condition type - add 1 more step and add your field.
ie 10 - 901
and in 20 - your required field
regards,
Reshmi
Edited by: reshmi bhaskar on Apr 25, 2008 10:21 AM

Key combination for tax condition record

Dear Experts,
I want to create new key combination for creating a condition record for a particular condition type for tax code using T CODE FV11,
please tell me what is T CODE TO Create key combination ,
Thanks in advance

1.Create Table in V/03
2.Assign to access sequence in OBQ2

Repricing of Custom Field used in Key combination for Pricing

Hi,
we have created a custom field and this field is being used in the Key combination for Pricing. For standard fields we all know that the pricing condition is repriced once the value of the key field is changed in the document automatically (not manual update)
The problem with this having the custom field in the Key combination is that when this fiel value is changed in the document the condition is not repriced automatically. We need to Do the price update manually for determining the new condition value.
Request you to help in solving the issue. Do explain the things to be carried out for automatic pricing for the Custom fields added.
Thank you in advancd.
Regard
Kula

Hi Kulasekar,
I think you have to implement Badi CRM_COND_COM_BADI, update communication structure with updated value from transaction should do reprice.
Hope this helps!!!

Startup key combinations on Intel iMac WITHOUT original keyboard

None of the startup key combinations (like C to boot from CD) work on my iMac using the new aluminum keyboard I bought (instead of the white plastic one which had come with it).
Is there a way around this?
Thanks.
Message was edited by: oldblueday

Did you install the software as instructed in the user documentation that came with the keyboard?
Is the keyboard plugged directly into a USB port on your iMac?

Startup key combinations...

Hi all,
I installed Lion this week and now I can't use any startup key combinations on my mid 2010 iMac. I have a wireless keyboard. They used to work under Snow Leopard. I wanted to use Option on startup to see my bootable disks, but no key combinations are now recognised. I would reset the PRAM, but I can't because of this problem. Any ideas? Thankyou. Andy.

I answered my own problem -
It still works, you just have to be a LOT more accurate with the timing. I managed to reset the PRAM and use the OPTION key to reveal the rescue partition that Lion creates. Took me 3 or 4 tries though.
Hope this helps somebody.
Andy.

"Country/Region/Plnt Region" key combination for JVRD

Dear Guru
We are using this key combination for JVRD. When I check the condition analysis for my PO, the record shows that
Country = IN
Region = !
Plnt Region = !.
I checked my vendor master address and the plant already updated with Region in the address.
Where else do I need to checked?
Thanks in advance.

Hi,
Please check in FV12 how these values showing...
if they are fine...check in the table t001w...
Hope it helps
Kuber

Startup key combinations with bluetooth keyboard?

In Lion, accessing the recovery partition entails holding down the command-R key combination at startup. Selecting a startup disk and starting up in Safe Boot mode also require holding key combinations at startup.
But under Lion and a bluetooth keyboard, none of these key combinations work. A wired keyboard works fine, but I no longer have one.
A friend who downloaded and installed Lion today just called and asked how he can do this with HIS bluetooth keyboard, so this seems to be a general concern.
Any tips? Thanks!

Some PC keyboards may map it to the Windows key, but on most it should be ALT.

Key combination for condition record

Hi,
I am trying to create condition record for tax code using tcode FV11.
I have enter condition type as JMOP.
but in key combination it is not showing Tax classification
how can I add this key combination.
Please help.
Regards,
vijay

Hi,
The Access sequence JTax should be the access sequence of the Tax condition types .
Financial accounting > Tax on Sales/ Purchases> Basic settings
Then using the FV11 for the Tax condition types, the access sequence " Tax classification " can be used.
Thanks & Regards,
Amjad

Is there a "fine" move key combination for precision placement?

As I'm trying to arrange objects in the document, when I press the up/down keys to move them precisely, they move at an arbitrary large step.
Now, if I press the shift key while I move them, that step is further increased (like the previous was too small...).
So, is there any other key combination that reduces that step and makes it finer for a more precise placement as in other applications?

I do not know. I am also missing this option.
Adobe Help:
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-6426a .html#WS714a382cdf7d304e7e07d0100196cbc5f-6421a
You can also use the grid lines:
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-631da .html#WS714a382cdf7d304e7e07d0100196cbc5f-631aa
Config grid:
cmd + K > Guides & Grids
and:
show grid: CMD + '
Snap to grid: shitf + cmd + '
P.S.
Besides Illustrator 17.1 seems to have a problem with a precise setting and attracting obiektwó to mesh.
I can not set the center prostąkata x: 0 y: 0 px. ?!

Startup key combination to reinstall lion (command G ?)

Does anyone know the startup key combo to get the reinstall option for Lion. I think it may be command + G or command + F ?

Are you talking about the recovery partition included? that would be Commmand + R or, if that does not work,simply holding Option should bring up the Startup Manager from which you can then choose the Recovery HD.
http://web.me.com/pondini/AppleTips/RecoveryHD.html

New key combination for access sequence

hi,
i have an active access sequence called ZBMP. There is 2 key combinations to the access sequence
5 materail / plant
10 material
I need to add a new key combination
15 - material / Pant / Distribution Channel
to the access sequence.
Can someone please help.
Regards

Hi,
Step 1: Go to V/03 and create a table with key fields(material / Pant / Distribution Channel) or Use the existing standard table.
Note the created table number.
Step 2: Go to V/07 and select your previous Access Sequence and Double click on the Access field under Dialogue structure. click new entries and specify the new table number with step number (Created in step:1).
Step 3: Now select the Line item and double click on Fields. Ignore the warning by pressing Enter Key.
Now do save.
Step 4: Check your Access sequence. New table would be added.
Hope it helps.
Regards,
A.Govin

Startup key combination does not work

Hi all,
Not quite sure what I have done...
Received my MacBook Pro today...
I installed 10.4.8, installed boot camp 1.1.1, set a partition of 10 GB for windows and in the partition manager of the XP setup I deleted what I thought was a 100 odd MB partition and I installed XP on the 10GB partition boot camp made for me.
Done what I needed to do in XP and tried to boot up in my Mac OSX by holding down the option key on startup. Then I was presented by a screen with a Padlock image and a password box. I typed in the only password I had created for my OSX and that didn't work. So I tried using the install disc 1 by holding down the C key while booting up, it didn't work, it just boots in XP. Also the D key and other start up keys don't seem to work. I have spend all night looking for some post mentioning this but it seems that this is the only case.
Any ideas????
Cheers

Sounds as though you may have deleted your OS X partition from the XP partition manager?
Did you activate File Vault in OS X? I've been using Macs for years and don't encourage people to use File Vault, as so many things become impossible to remedy if anything goes wrong.
Nevertheless, if you insert your Installation Disc 1 and start up while holding down the C key, you should be able to boot from Disc 1. If that can't be done, you will need to call Apple.
If you did manage to boot up from the installation disk, I would suggest that you simply do a total zero erase and start over, with a fresh installation of OS X.

Key combination for TAXINN

Hi,
Please tell me which combination is best suitable for configuring TAXINN procedure?
if we have several vendors and many materials,then which key should be used?

go for country and tax code combination it will solve your purpose.
You will not have to mantain condition record in Fv11 for each vendor material planmt combination.
You can directly assign for your tax code and country it will be common for whole company code.
just make sure you have defined tax condition type with acess sequence JTAX.
Reward if usefull
Regards
sujoy

Startup key combinations for G5 PowerMac

Similar Messages

Maybe you are looking for