Startup on AS/400 fails after following the Installation Instructions
I am not at all familiar with AS/400. Can anybody tell me what the
problem is? Following the instruction in the message does not help
either...
Startup on AS/400 fails after the WEBLOGIC/STRWEBL command is executed
with the following message:
The WebLogic Server did not start up properly.
Reason:
Cannot start server because weblogic.class.path is enabled and the
Weblogic classes are not in the weblogic.class.path. Please alter
the weblogic.class.path to include the Weblogic classes or set
weblogic.system.disableWeblogicClassPath=true to allow classes to
be loaded from the java CLASSPATH.
NOTE: Doing so will disable EJB hot deploy and should only be
done on platforms as specified in the documentation.
Java program completed with exit code 1
Mark van Holsteijn
Mark van Holsteijn <[email protected]> wrote:
I am not at all familiar with AS/400. Can anybody tell me what the
problem is? Following the instruction in the message does not help
either...
Startup on AS/400 fails after the WEBLOGIC/STRWEBL command is executed
with the following message:
The WebLogic Server did not start up properly.
Reason:
Cannot start server because weblogic.class.path is enabled and the
Weblogic classes are not in the weblogic.class.path. Please alter
the weblogic.class.path to include the Weblogic classes or set
weblogic.system.disableWeblogicClassPath=true to allow classes to
be loaded from the java CLASSPATH.
NOTE: Doing so will disable EJB hot deploy and should only be
done on platforms as specified in the documentation.
Java program completed with exit code 1
Mark van Holsteijn
I got the same problem with you. If you had handled with it, please tell me. Thanks!
Similar Messages
-
I cannot convert files to mp3 format after the latest iTunes program update.
See:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I just bought my IPhone and am also getting the the Service Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services. This is after following the uninstall/reinstall instruction. I am due to travel in 2 days and am very upset about this. This needs to be fixed!!!
http://support.apple.com/kb/TS1567
Log in to the Windows with "administrative rights". -
my computer no longer seesmy 3rd generation ipod nano. after following the on line directions to re-install I get a message it is ok to discinnect instead of do not disconnect. how to I get the ipod back onto my computer?
Hello rh3362,
I would start with this:
http://support.apple.com/kb/TS1369
Hope this helps.
~Julian -
I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.
It downloaded all my contacts, photo's with no problem. I called the number they gave me from my old phone and then turned it off. I then put the sim card in and charged the phone. I followed all the setup steps and no I cannot send any text or make any phone calls. I get a message that they cannot authenticate my phone to dial #8899 but get the same message.Hello Notahappycamper1962
Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
I look forward to hearing from you and getting this addressed.
JoeL_VZW
Follow us on Twitter @VZWSupport -
I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!
If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup. -
After following the instructions to reset my ipod classic i am confronted with a red cross. Does anyone know how to remove this?
Hello theplantman5,
Thanks for participating in the Apple Support Communities.
If your iPod only shows a circle and cross (or x) screen after resetting or restoring it, try placing it in Disk Mode and restoring it.
Restore iPod from Disk Mode
Disconnect iPod from your computer.
Manually put iPod into Disk Mode.
Open the latest version of iTunes and connect iPod.
Restore iPod.
If these steps don't work, or you've already completed them, your iPod may need service:
Setup Service for iPod
If you cannot force your iPod into disk mode and restore it, then your iPod may need service. Click one of the links below to setup an iPod Service Request online or make a reservation at the Genius Bar before visiting your local Apple Retail Store.
Apple Retail Store
iPod Service Request Online
You can find the steps above in this article:
iPod Displays a Red "X" Icon - Apple Support
All the best,
Jeremy -
After following the restore steps. I get an error while restoring Iphone. error code is 1 or -1. Please suggest what should I do to resolve this problem.
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694 -
I am trying to get photos off of my airport time capsule back up onto my new macbook pro. I followed the above instructions and after I choose the library I want to upgrade and hit continue it wants to open my iPhoto to convert, when I click yes it just gives me the original message and sends me back to this page. Am I missing something?
Is your Time Capsule being used for your TimeMachine back up? Or is it simply being used as an external hard drive?
To use a TimeMachine back up you must first restore it
LN -
My Macbook pro Mavericks does not connect well to a data project even after following the recommended process, Has anybody else struck this problem, what is the optimum display setting? Im close to going back to PCs
You said " digital AV Adapter and thunderbolt". Do you mean Thunderbolt/min displayport to HDMI adapter?
It appears you are using the free version of the Display Menu app.
What does the Apple Display properties show? System Preferences>Displays>Display show?
Look at the projector/go to the manufacturer's support site and find the native resolution of the projector.
Googling for Sori data projector id not produce any hits -
After following the instructions to completly uninstall iTunes and related components, I restarted computerand reinstalled iTunes, Then I received the error message that iTunes couldn't load because program file Apple Application Support (deleted as per instructions) wasn't present. What now?
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??
I have had about 9 iOS devices at work do this.
The fix and it will wipe out anything on your iphone is to connect it to your computer and have the latest version on iTunes open. Hold the Power/Sleep and Home button till it blanks out. Keep holding the home button untill it says recovery mode on the screen of the computer and do a restore. -
My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.
After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.
-
Running Mac OS X 10.7.4 with M/S Outlook 2011. I am a two day old ¨baby¨ on a MAC [heretofore a M/S OS PC user]. Did a M/S update yesterday including a ¨CRITICAL¨ M/S Word 14.2.2 version installation. Following the installation, I got a notice that "an older version of M/S Database daemon is running and I must first delete "daemon" from Startup Items & then restart my computer. See MAC OS help." OK, I confirmed daemon was not in the Startup Items and restarted my computer. Now, when I attempt to open M/S Outlook I get a notice that "There is a problem with the Office database. To use the database you must rebuild it using the Database Utility"...Two choices " Cancel" or "Rebuild" If I chose "Rebuild" I am notitified immeditely that "To use the database utility, you must first quit all Office applications" [There are no office applications open EXCEPT the Database Utility which I confirm using the Mac´s Force Quit Application]. In any event, I <click> "Quit All" and after about 3 minutes a box popsup telling me the same thing "to use the Database Utility I must first quit all Office applications". If I choose "Cancel" on the the original notice that stated "There is a problem with the Office database. To use the database, you must rebuild it using the Database Utility." the notice disappears from the screen for about 5 seconds and then reappears. The notice is currently on the screen as I type this plea for help with this issue. As an aside, I followed the instructions detailed by Christopher Breen, Macworld.com dated 18 April 2012 article "Undoing the damage wrought by Microsoft´s Outlook update" wherein he details a procedure to "REPLACE" M/S Outlook´s Database Headers with a working copy and thereby rebuild the Main Identity Database. Here again, after I <click> "REBUILD" in the Database Utility it comes up "UNSUCCESSFUL" in rebuilding the Main Identity database.
There are other Forums that might have an answer, try this one:
https://discussions.apple.com/community/windows_software/windows_compatibility -
Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook. When I do this nothing happens. Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine. Any ideas what I'm doing wrong? Do I need to enable something on the Macbook?
An update...
I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
So -- anyone get through this connection problem and have any ideas to share??
iMac Mac OS X (10.4.7)
Maybe you are looking for
-
We have tried joining two DSO's and are getting the warning that "more than one datasource has been used in this report". It appears that the DSO driver does not support joins. The report runs but it is VERY slow, the same sort of performance you get
-
How to pass VO1 return value to VO2 parameter?
Hi Friends, I have two VO's, in a page. In the First VO1 i am pass 2 parameters then this vo return one single value ex: 1234 Now my Second VO2 i want to pass Parameter , first VO1 result value. How to achieve this. But i don't want to capture VO1 re
-
HT201342 Can't send mail anymore from my older laptop.
Too old for newer software and seems to be rejecting .mac address. Was working and did go through proper process for icloud. Now can receive mail but not send. No icloud or mail options in my preferences. Changed outgoing mail server to icloud but
-
Hi all I need to know the posting Date of parent form when i open a Batches Setup form (form 41) : There are two posibilities to open a Batches Setup form (form 41): a) AR Credit Notes (form 179): ctrl+tab --> open a BatchNumberselection (form 42
-
I am activating business content in BI7, but All Business content dataflow available looks like as that of BW 3.5 i could not found BI7 specific dataflow. so i want to know why In BI7, Business content are look are available as that of 3.5 and not in