Startup option in programs get unticket

For some reason some programs running in the background (or in the icon-menu by the clock) get its startup at system startup unticket every time I logout from my user. I therefor need to manually run them on every boot. I have also tried adding them to the list of programs suppose to bootup, in the user profile in system settings, but this list gets cleared after logout.
Example programs that doesnt start:
- Dropbox
- Jottacloud
- Viscosity
Programs that do start:
- Avast
Programs running as normal in the dock starts up as normal after login.
Do anyone know how to solve this?

The problem with Windows seeing a different date and/or time is a problem with Windows or Boot Camp (perhaps you haven't installed the drivers from the Driver CD you would have burned during the Boot Camp installation.)
Have you used the Date and Time control panel in Windows to set up the date and time? It is supposed to sync with the internal date and time on the Mac hardware but there have been reports that the date and time display in Windows is not maintained properly. This is a bug and cannot be fixed by trying to tinker with the hardware. Have you installed the most recent Boot Camp software (1.3?)

Similar Messages

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

When I startup Firefox, I always get "Welcome to Firefos" tab. I have tried to change mu options, but when I close Firefox, the options revert back to the origional options before I changed them. How do I correct thest problems??

When I startup Firefox, I always get "Welcome to Firefos" tab. I have tried to change mu options, but when I close Firefox, the options revert back to the origional options before I changed them.

Looks that your current profile isn't working properly.
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Command line startup options to Graphical Debugger

Hi,
With Workshop 5.0 as well as Forte Developer 6, it was possible to pass a program name at the command line with the -D option. This, in conjunction with an appropriate .dbxrc file, allowed me to invoke Workshop (and Forte Developer 6) from my own script, with the program to be debugged pre-loaded in the debugger window.
I did not see the "-D" startup option for runide.sh. Is there an alternative way in Sun One Studio to get the functionality offered by the -D option of Workshop and Forte Developer 6?
Thanks in advance.
Saby

Why wouldn't registry switches work for you?
AFAIK, its the only way you are going to be able to modify the JRE (on Windows). You really need to be able to modify the registry if you want to work with iAS.

Startup problem - no startup options

I've been having numerous problems with my X61 7675-CTO with Win Vista Business and most of them are due to Lenovo's system updates. But this one is a "residue" from when I had my computer sent in for service. Ever since, upon startup I hear three beeps: one long and two short ones. Furthermore, no buttons seem to work while starting the computer - not the blue ThinkVantage button, not F8 (to choose e.g. safe mode) and no other buttons. So when I have problems (which I do...) I cannot start the computer in safe mode, I cannot run Rescue & Recover and I cannot run PC Doctor.
I have tried everything I can think of, but I really have no clue why these startup options won't work. Will I have to reinstall Windows to get this to work? (I really, really don't want to do that.) Are there any drivers or updates I can apply to alleviate this problem?
Thanks.

bananaman wrote:
Unfortunately, per the Lenovo Secret Beep Decoder Ring, this means a problem with any of:
System board
LCD assembly
DIMM
Thanks, bananaman, that's real bad news.
It is "funny," however, that the sounds were there as I got the laptop back from Lenovo's technicians. Obviously, they don't do any testing whatsoever after having "fixed" problems (they replaced the system board). If they did, then wouldn't they have reacted to the beeps?
I noticed the beeps, but I didn't think much about it until some days ago when I started having BSOD problems and needed to boot in Safe Mode - but that was impossible due to no keys functioning. And now my warranty has expired... Any suggestions of what I can do? I can try calling Lenovo, but I don't think they have ever delivered a solution but to "send it in" - and that is, this time, the cause of the problem...
Or should I perhaps ignore the beeps and just continue using the computer. I've managed to get rid of the BSODs, so it seems to be working (for now...).

I have a MacBook Pro, it recently started freezing upon startup. It would get to a blue screen and just sit there. I've tried booting in safemode to run disk repair and still doesnt help. If I do manage to get past the blue screen, it still freezes

My mac keeps freezing upon startup. It will get to the blue screen and promptly freeze. If I manage to get past the blue screen, and open up youtube on google chrome, it will freeze before it loads youtube. I've tried safeboot and disk repair, nothing seems to work. I even tried to factory reset it but it wont connect to my internet when I reboot with power + option.. any ideas?

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

If you've changed your startup options on mac to start in windows, how do you fix and go back to mac on startup?

if you've changed your startup options on mac to start in windows, how do you fix and go back to mac. I can't get my mac to switch back to mac, it is like stuck in widows mode, I have tried holding down the options key upon start up and that did not fix it either.
Please help! Thank you so much!

The Apple drivers you install in Windows also puts a Startup Drive icon in the Task Bar. Choose that to change the startup disk back OS X.

How to Display "Advanced Startup Options" Menu during Boot (NOT Restart)

How do I get to the "Advanced Boot Options" menu when booting WSE2012? I currently cannot boot from the system drive, the installation DVD or a bootable USB installation drive since the September 19 Microsoft updates were installed. I cannot
do a "restart" to get there since I cannot get into WSE2012 at all in the first place. No matter how I boot the system, I can never get past the "logo/progress circle" screen. I want to restore a system backup from before September
19 but cannot figure out how to do it since I cannot get to the "Advanced Boot Options" screen. I searched through my ASUS UEFI BIOS for an option to restart with the advanced menu displayed but could NOT find any setting for this. I am totally lost.
How can I do a system restore (i.e., recovery)? Please HELP!
Denis W. Repke

I've pretty sure I read that Microsoft removed the "F8" feature in Windows 8 and Windows Server 2012. In any case, I did try "F8" a couple of times on WSE2012, pressing and releasing it numerous times during the boot process, starting well before Windows
started to load -- and it did NOT do anything.
I also was amazed that the system would not boot from the WSE2012 installation disk from either of my DVD drives nor from a bootable USB drive containing the install files. Until this incident, I never had a problem booting from a "bootable" DVD or
USB drive on that server. It is also very easy to bring up the "Boot Menu" from my ASUS UEFI BIOS during the boot from which I can select precisely what boot device I want to use.
As I explained in detail in my earlier post on this forum, the only way I was able to get to the "Advanced Startup Options" screen was by swapping SATA ports for my system disk which "somehow" caused the next boot to automatically start "Auto-Recovery" mode
which finally allowed me to get to the "Advanced Startup Options" screen and recover the system files from an earlier date. After doing this, the system rebooted without issues. After booting, I ran a set of backups after using Windows Update. Then, I powered
down,"unswapped" the SATA ports and rebooted. No problems.
This was all very weird and frustrating. I still cannot believe that there is apparently no way to "directly" get to the "Advanced Startup Options" screen during a hard boot. If there was, recovery would have been simple instead of several days of frustration
with a "dead" home server.
Denis W. Repke

Where does an abap program get stored after save?

Where does an abap program get stored after save? ...plzz tell
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 11:28 AM

this program download the code to presentation server
Analyse this code.
CHECK IT IN DEBUGGING
REPORT zdownload_source MESSAGE-ID zabap.
TABLES: trdir.
SELECT-OPTIONS: repo FOR trdir-name.
PARAMETERS: path(60) TYPE c DEFAULT 'C:\programs\'.
DATA: BEGIN OF tabsource OCCURS 10,
      source(72) TYPE c,
      END OF tabsource.
DATA: BEGIN OF tabtext OCCURS 50,
      tab LIKE textpool      ,
      END OF tabtext.
DATA: BEGIN OF tabrdir OCCURS 100,
      rdir LIKE trdir,
      END OF tabrdir.
DATA: filename LIKE rlgrap-filename,
      mode TYPE c VALUE ' ',
      rdirrows TYPE i,
      sourcerows TYPE i,
      rc TYPE i,
      length TYPE i.
FIELD-SYMBOLS: <p>.
DATA: ok TYPE i VALUE 0,
      fail TYPE i VALUE 1.
AT SELECTION-SCREEN.
DATA: i TYPE i.
DESCRIBE TABLE repo LINES i.
IF i <= 0.
    SET CURSOR FIELD repo.
    MESSAGE i001 WITH 'se message class'.
ENDIF.
START-OF-SELECTION.
CONDENSE path NO-GAPS.
length = strlen( path ).
SUBTRACT 1 FROM length.
ASSIGN path+length(1) TO <p>.
IF <p> <> '\'.
    ADD 1 TO length.
    ASSIGN path+length TO <p>.
    <p> = '\'.
ENDIF.
SELECT * FROM trdir
          INTO TABLE tabrdir
          WHERE name IN repo.
DESCRIBE TABLE tabrdir LINES rdirrows.
CHECK rdirrows > 0.
LOOP AT tabrdir.
    MOVE tabrdir TO trdir.
    PERFORM download_sourse USING rc.
    CHECK rc = ok.
*    PERFORM download_textpool USING rc.
ENDLOOP.
write :/ sy-dbcnt , ' number of programs downloaded'.
*&      Form download_sourse
*       text
*      -->P_RC text
FORM download_sourse USING rc.
rc = fail.
CLEAR: tabsource, filename.
REFRESH: tabsource.
READ REPORT trdir-name INTO tabsource.
DESCRIBE TABLE tabsource LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
    EXPORTING
      string1         = PATH
      string2         = TRDIR-NAME
      string3         = '.ABA'
   IMPORTING
     string          = FILENAME
   EXCEPTIONS
     too_small       = 1
*   OTHERS          = 2
IF sy-subrc <> 0.
WRITE: 'AAAA'.
ENDIF.
CONDENSE filename NO-GAPS.
PERFORM download TABLES tabsource USING filename rc.
ENDFORM.                    " download_sourse
*&      Form download_textpool
*       text
*      -->P_RC text
FORM download_textpool USING    p_rc.
rc = fail.
CLEAR: tabtext, filename.
REFRESH: tabtext.
READ TEXTPOOL trdir-name INTO tabtext LANGUAGE sy-langu.
DESCRIBE TABLE tabtext LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
    EXPORTING
      string1         = path
      string2         = trdir-name
      string3         = '.TXT'
   IMPORTING
     string          = filename
   EXCEPTIONS
     too_small       = 1
*   OTHERS          = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM download TABLES tabtext USING filename rc.
ENDFORM.                    " download_textpool
*&      Form download
*       text
*      -->P_TABTEXT text
*      -->P_FILENAME text
*      -->P_RC text
FORM download TABLES   tabtext
                      USING filename
                       rc.
rc = fail.
CALL FUNCTION 'WS_DOWNLOAD'
   EXPORTING
*     BIN_FILESIZE                  = ' '
*     CODEPAGE                      = ' '
     FILENAME                      = filename
     FILETYPE                      = 'ASC'
     MODE                          = 'MODE'
*     WK1_N_FORMAT                  = ' '
*     WK1_N_SIZE                    = ' '
*     WK1_T_FORMAT                  = ' '
*     WK1_T_SIZE                    = ' '
*     COL_SELECT                    = ' '
*     COL_SELECTMASK                = ' '
*     NO_AUTH_CHECK                 = ' '
*   IMPORTING
*     FILELENGTH                    =
    TABLES
      data_tab                      = TABTEXT
*     FIELDNAMES                    =
*   EXCEPTIONS
*     FILE_OPEN_ERROR               = 1
*     FILE_WRITE_ERROR              = 2
*     INVALID_FILESIZE              = 3
*     INVALID_TYPE                  = 4
*     NO_BATCH                      = 5
*     UNKNOWN_ERROR                 = 6
*     INVALID_TABLE_WIDTH           = 7
*     GUI_REFUSE_FILETRANSFER       = 8
*     CUSTOMER_ERROR                = 9
*     OTHERS                        = 10
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc <> 0.
    WRITE: / sy-subrc, ' message declare '.
ENDIF.
rc = sy-subrc.
ENDFORM.                    " download
regards.
santhosh reddy
<REMOVED BY MODERATOR>
Edited by: Santhosh Reddy on Feb 13, 2008 6:48 PM
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 12:00 PM

Swing program getting slower

Hi
I have done a simple program.It shows a JCombobox on a panel.JComboBox contained 3 String (Back,Search,GetaAll).I have addeed a addActionListener(this) to the JComboBox)
It works fine at first.When I click Back again and again its going alower and slower.After doing 20 times like this.it remains at constant stage.The CPU Usage increases continiously.and remains 100 finally.At that time my program remains in a perticular page.
My source code is given below.
import java.awt.Color;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.ComboBoxEditor;
import javax.swing.JButton;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
public class ActWithComBox extends JFrame implements ActionListener {
     JPanel jpanel ;
     JLabel label = new JLabel("Wellcom to callBack");
     JLabel label1 = new JLabel("Wellcom to Search");
     JButton button = new JButton("Back");
     JButton button1 = new JButton("Back");
     String[] item = {"Options","Back","Search","Get All"};
     JComboBox jcomboBox = new JComboBox(item);
     public ActWithComBox() {
          super();
          jpanel = new JPanel();
          jbInit();
     private void jbInit() {
          jpanel.removeAll();
          setContentPane(jpanel);
     jpanel.setLayout(null);
          jpanel.setBackground(Color.BLUE);
          jcomboBox.setBounds(150,240,100,30);
          jcomboBox.addActionListener(this);
          jpanel.add(jcomboBox);
          //jpanel.setVisible(true);
          //jcomboBox.setVisible(true);
     public void actionPerformed(ActionEvent e) {
          if(e.getSource() == button){
               jbInit();
               return ;
          }else if(e.getSource() == button1){
               jbInit();
               return;
          jcomboBox = (JComboBox)e.getSource();
          if(jcomboBox.getSelectedItem() == "Back"){
               callBack();
          }else if(jcomboBox.getSelectedItem() == "Search"){
               callSearch();
          }else if(jcomboBox.getSelectedItem() == "Get All"){
               System.out.println("inside Get All");
     private void callSearch() {
          jpanel.removeAll();
          jpanel.setLayout(null);
          jpanel.setBackground(Color.RED);
          label1.setBounds(10,10,200,30);
          label1.setForeground(Color.GREEN);
          button1.setBounds(50,50,100,50);
          button1.addActionListener(this);
          jpanel.add(label1);
          jpanel.add(button1);
          //jpanel.setVisible(true);
     private void callBack() {
          jpanel.removeAll();
          jpanel.setLayout(null);
          jpanel.setBackground(Color.BLACK);
          label.setBounds(10,10,200,30);
          label.setForeground(Color.RED);
          button.setBounds(50,50,100,50);
          button.addActionListener(this);
          jpanel.add(label);
          jpanel.add(button);
          //jpanel.setVisible(true);
     public static void main(String[] b){
          ActWithComBox act = new ActWithComBox();
          act.setSize(300,300);
          act.setVisible(true);
please reply me soon.
Excuse for my english.
Thanks..
Chagulu

Use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags when posting source code.
It looks to me like the actionListener is added to you button every time you click the comboBox. So your actionPerformed code executes 1, then 2, then 3, ....then xxx times.

Startup options for older (tray loading iMac)

Hi All,
I have a hopped up iMac 333 (with Harmoni Firewire) that I'm trying to get refreshed. I've seen the KB of the keyboard startup options for newer Macs, but they claim that these count for slot loading and later. Does anyone have the list of keyboard startup options for older Macs such as mine?
Thanks!
Keith.

Here's a list. All should work except those requiring native FireWire:
http://docs.info.apple.com/article.html?artnum=75459
Richard

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

User cannot change password option is automatically getting unchecked while giving domain admin rights

user cannot change password option is automatically getting unchecked while giving domain admin rights

Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

HT4623 While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

I am getting this message also.... mine cant update too...

Startup option in programs get unticket

Similar Messages

Maybe you are looking for