Startup partition dies in the middle of booting, Invalid node structure?

Hi! In the last few weeks, possibly since I last upgraded Lion and Safari, my iMac has been performing very badly. It's been sluggish, Safari and Finder repeatedly freezing and crashing/rebooting. Last night it escalated, and I launched Disk Utility to repair permissions. Ten hours later and no problems found. Not ten minutes later, the FInder crashes badly and I have to force a shutdown. When restarting, I get the grey progress bar, but it only reaches about 10%, then the hard drive whirrs and clicks a few times, and the computer shuts off. This happens every time I try to restart.
So instead, I boot into the recovery partition, and launch Disk Utility from there. Repair disk says the boot partition has an invalid node structure and I have to backup and reinstall. Now, I do have a Time Machine backup (a few days old since I don't have my Drobo on all the time due to the noise it makes), but since it's 800 GB of data I'm a bit reluctant to commit to that, hoping there is a simpler/faster solution. I'll see if I can try Disk Warrior. Or do you think I'd be better off to just nuke the entire drive and start from scratch?
The strange thing is that I have a Bootcamp partition with Windows 7, which works fine and actually can browse the files on the Lion partition. What does that mean? Can I use that to my advantage? If I do restore from Time Machine, will that affect my Bootcamp partition?

Disk Warrior confirmed that there were problems, but couldn't repair the node structure, possibly because of bad blocks. Support at the local Mac store (we don't have Apple stores here) said I should just try reinstalling the system, so that's what I did. It didn't work the first time, but then I reformatted the partition and since then everything has worked allright. I have now restored everything from the TM backup (which took about a day). I'm now guessing that the whirring was not actually some mechanical problem with the drive, but on the other hand DW wasn't too happy about the drive, so maybe I still have to replace it? I'm using it now and it seems better than before, but I won't do any serious work on this computer until I have a new TM backup in place.
(On that note, is it possible to "link" the restored system to the old TM backup that it was restored from? Or do I have to start over with a completely new TM backup, losing all the versioning of the old backup?)
UPDATE: Just ran Disk Utility, which now reported an erroneous block count in a file. Crossing my fingers hoping it's nothing critical adn that DU can repair it ...

Similar Messages

Problem when booting - Invalid Node Structure

Hey!
I decided to put my MacBook G4 up to date. So I installed several updates of my software. So far so good. Then I tried to check with Disk Utility wether there were any problems on the file system. I ran "repair Disk Permissions" and some errors where found and corrected. I tried "Verify Disk" and it announced there where some errors namely "Invalid Node Structure". As I couldn't repair the disk as it was the current boot disk I decided to run Disk Utility from a CD. Unfortunately I didn't have my original cd so I asked a friend to use his. He gave me his "MacBook Pro - Mac OS X Install Disc"s (Mac OS X 10.5) and I ran it on my PowerBook G4 (Mac OS X 10.4 installed). It gave the same result like when I ran it from my hard drive. When I tried to repair it, it started and stopped after some seconds (between 20 and 40 seconds) saying it was unable to repair it.
After that the computer does not mount from hard drive (10.4 installed) anymore, only from cd. I tried booting in single user mode and executing /sbin/fsck -fy but I had the same result ("disk0s10: I/O error. Invalid node structure (4, 7698) **Volume check failed.").
I think I can resolve the problem by starting my mac in firewire mode, backing up my data and reinstalling Mac OS X (would a repair from 10.4 Disk Utility work?) but I would be happy if there were any faster / more elegant way to do so as I cant use my install cds for 10.4 right now as I am in an other country for some time.
Any help?

Hi Ja!, and a warm welcome to the forums!
Unfortunately DU & fsck can't fix all that much, your best bet is DiskWarrior, you need the CD though.
http://www.alsoft.com/DiskWarrior/
If DW can't fix it, you might try Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
Or FileSalvage...
http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
to recover what you can.
PS. Don't use Leopard Install Disk to work on Tiger Hard disks, it's always messed up my Tiger Disks ehen I did.
Also, not a good idea to even Repair Permissions if there are Disk problems like you have, you don't want to write anything to a disk that has problems, that means even trying to boot off it until you fix it.

Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried r

Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried removing the game several times and reinstalling but the box still appears, I even tried installing the game on a different apple I'd, and still the box is there, do you k ow how to fix this?

Hi Bev076,
I would try these ideas first:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that doesn't resolve the situation, I would suggest reporting it:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Take care,
- Ari

Invalid node structure and Boot Camp 1.1.2

I downloaded Boot Camp 1.1.2 and during the installation of Mac Drivers I kept getting dialog boxes that the software i'm installing did not pass Windows Logo testing- I just ignored it.
After that Windows XP didn't recognise my keyboard, airport, ...
I prepared a new instalation with Boot Camp Assistant and i had an error message when the disk partition was processing.
I run Disk Utility from my Mac OS X install disk DVD and I got the following:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Please give me some help to repair my disk and to understand what happened.
MacBook Pro 2 GHz Mac OS X (10.4.8)

If you are unable to repair the drive you will need to repartition and reformat the drive.
I recommend a cloned backup to an external FW drive. You can use this procedure:
How to Clone Using Restore Option of Disk Utility
1. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Set Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only.
2. Open Disk Utility from the Utilities folder.
3. Select the backup or destination volume from the left side list.
4. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button.
5. Click on the Restore tab in the DU main window.
6. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
7. Select the startup or source volume from the left side list and drag it to the Source entry field.
8. Double-check you got it right, then click on the Restore button.
For added precaution you can boot into safe mode before doing the clone.
You will only have to reinstall your third-party applications. All standard OS X applications will be reinstalled except for bundled applications such as iMovie, iDVD, Garageband, etc. These can be reinstalled using the Bundled Applications installer on the OS X Installer Disc.
If you make a cloned backup all your data will be on the backup. You can restore it afterwards by copying the folders to their respective locations on the startup volume.

I got the dreaded "Invalid Node Structure" Error

Hi All,
I entered the Mac world recently with a spanking new Macbook Pro 15". Updated it online to the latest OS 10.6.4 Snow Leopard.
Today I was trying to install some more free application from the Official Mac Software Site. After installing a couple of softwares, I popped in the included recovery Disk and tryed installing xcode from the 'additional software' folder on the disk. But this failed
After this I thought of restarting the mac and try again. However, the **** thing now wouldn't boot anymore. Just stays on the Gray apple screen with the small ring rotating below it for ever.
Then I tried repairing it using the Disk Utility booting form the DVD. On verify Disk, it shows 'Invalid Node Structure'. So I clicked 'Repair Disk', And it just stayed there for ever without any progress. So I stopped it. And after trying the above 3-4 times, I Hard rebooted the system, and this time entered the console mode (Command + s).
Entered the command fsck_hfs -rf /dev/disk0s2 (disk0s2 is what Disk Utility showed me).
The output of this command shows:
** /dev/rdisk0s2
Executing fsck_hfs (version diskdev_cmds-491.0.2~7).
** Checking Journaled HFS Plus Volume
** Checking extents overflow file
** Checking catalog file
** Rebuilding catalog B-tree
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
disk0s2: I/O error.
And this goes on and on and on.... :((
Now what to do???

Hmmm, yeah that could be the last option, but I can't format the disk right now, 'cause I've some extremely important (not-yet-backed-up) files in it
So I'd like to try out all possible ways to recover the system before even thinking of a format!
BTW, the above fsck_hfs command I ran was by booting from the DVD itself.

Macbook Leopard 10.5 is not booting up and not even getting Verified Error : Invalid Node Structure

Hey, I am using Macbook Leopard 10.5, Yesterday while i was working it was on low battery i thought to connect it later, but all of a suddent its stopped fucntioning and everything goes blank. I thought it might be a Battery problem, but even after connecting charger for 2-3 hours, its not booting up. Only the Apple screen comes and then it goes shut down automatically.
I even tried to fix it using Apple CD, Disk utility, When i tried to Verify the disk It shows following error :
Disk cannot be repaired or verify.
And details : Invalid Node structure
Volume needs to be repaired error : Filesystem verify or repair failed.
I have very important Data on this disk, so i cannot even erase it.
Suggest me somehting. It have enough space to install new OS but System shows you need erase it.
I have tried to use Apple Hardware test by Holding D key, But its not working.

Helloi
http://supportdb.alsoft.com:591/FMPro?-db=alsoftsupport&-lay=main&-sortfield=Dat e&-sortorder=descend&Keywords=node&Product=%22%22&-op=lte&Date=%2F%2F&-max=15&-f ormat=AlsoftSupport-qa.html&-script=counter&-token=177&-Skip=0&-find

IMac Won't boot...Invalid Node Structure

My iMac is just...screwed up. It is a 2008 intel iMac that had worked fine for the last four years until lion. Everytime there was and update or I rebooted, my Mac would freeze at some point of the login. A permission repair or just repair disk would solve the issue an everyone and a while, a restore from backup. Recently my Mac started to slow down to the point it froze for several hours and force quit would never open. I held the button and since then I have been in trouble. The repair permissions had a ton of errors but successfully repaired. But when I repaired the disk, it's hit a couple of errors but ultimately failed right after "Invalid Node Structure" that error has been consistent every time I have attempted a fix and it failed.
I tried restoring from a backup to no avail. Then I wiped the drive and installed Lion (after a convienient 5 hours download) an it booted. I tried using it but it was extremely slow, let it sit over night and came back to it frozen. I had assumed it was slow due to indexing but after 12ish hours this didn't solve the issue. I clicked the apple button and it took a while to finally show up an restarted. Fro
There is wouldn't complete the boot. Froze at the apple logo or white screen with spinning mouse. Left that for several hours and stayed there. Tried repair and same issue. "ivalid node structure" redtating aftet that it just reboots and turns off a little bit after the chime. I have tried everything I could find on different forums without any success. I tried single user mode with the fsck commands and that failed also. I downloaded lion and made a recovery flash drive from another computer. I have since installed several new installations of lion after an erase and repartition. I took it to the apple store and they installed a fresh install of lion and it worked for a day then slowed down and froze. I would like to try everything possible before claiming the hardrive dead. Any other suggestions? (
I forgot to mention I have done PRAM resets in between the events I described as well as the SCM i think reset by unplugging. I have left it unplugged for over 12 hours, also have taken out all peripherals minus keyboard and mouse.

Oh I forgot to add, don't restore from TM or reverse clone, your data might have been messed up, rather cherry pick your good files from backup.
About much would a fix/Harddrive replacement cost?
You might want to get a estimate from Apple, while inside they can clean the filters and run a check.
If it's too much for you, then there are online services
OtherWorld Computing can replace the drive in iMac's
the new 2011's have the certain Apple drive heat for iMac software, not 2009, my mistake.
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
you might find a local service, Apple reseller might do it too, save the shipping costs.

The term "invalid node structure"

can anyone out there explain (in real simple terms please) what "invalid node structure" means. this appeared when i ran disk utility and attempted to verify my start up disk. one day the disk was perfect, the next day it had invalid node structure and "needs to be repaired". so i started up from the install dvd and then ran disk utilities on the offending disk. the start up disk then indicated all was perfect. i restarted from the normal drive and again ran the utilities test. all is fine. so what is a node and how does it become invalid structurally and why did it get well by itself????

Google "invalid node structure" and you'll find many mentions of this problem. It basically means a directory entry on your disk has become corrupted. Running Disk Utility's Repair Disk option can sometimes repair the problem. If not, Disk Warrior from http://alsoft.com/ is my disk repair tool of choice.

On verbose mode i get the next leyend, CSRUSHBBluetoothHCIcontroller: setupHardware super returned 0, invalid node structure (4,14279), my bluetooth is doomed and so my macbook or just change it?

end yes i got the macbook summer 2006 still working and sharp, got this problem,
CSRUSHBBluetoothHCIcontroller: setupHardware super returned 0, invalid node structure (4,14279),
and it shut down
im thinking of open it up and check the bluetooth chip, or antenna, if something is not in place, or someone knows another way ?

there is nothing out of place, i reinstall mac os 10.6 and i run disk first aid, and it says my disk is ok, still it turns off random

IPhone MAP voice dies in the middle: DANGEROUS

My iPhone's voice directions stops in the middle of giving me directions and then quits after 5 minutes. Needs a reboot to get the voice back.
Details:
1. Lookup some place on Maps.
2. Navigate to there (the usual directions stuff from Map's pin)
3. Route and Start.
Here is what happens:
1. Voice comes on and starts giving directions (turn right in 100 ft, etc.)
2. Within 5 minutes, the phone becomes silent and stops giving directions.
3. Map is still alive and shows all the visual information.
To Get Voice back:
1. Restart iPhone (this is in the middle of driving).
2. Enter pin number to get into the phone (this is in the middle of driving).
3. Got to map app (this is in the middle of driving).
4. Wait for Verizon signal to come back on.
This behaviour reminds me of Microsoft Software: Reboot for every use, reboot at least once a day, features work half of the time, features are partially implemented, etc. I'd rather NOT have this feature than a feature which quits in the middle of driving.
For me the iOS map application is DANGEROUS.
Platform: Latest iOS 6.1.3, iPhone 5. Carrier: Verizon,
My technical skill level: very good.

"You have never heard of this issue" ... I am facing this problem. So either it exists or I am making it up.
I really don't have the time to write this unless I have been in serious trouble because of this bug. So do not assume this problem does not exist. It probably does on other phones but shows up with less frequency or maybe more.
It is dangerous if you are likely to end up in the "combat zone" of a city and you don't want to stop as it is dangerous in the middle of the night and the MAP application stops giving you directions.
I paid money for it and there is no choice after that: neither for Apple nor for me. It has to work well as there are other products that have been doing this well for many years using ancient processing technology.
You may ask me not to use it. Dude, I paid money for it.
BTW, just so that you know that I have the utmost respect for Apple:
I have been working on Mac products for close to 30 years and I know the amount of care that the developers put into their products. Apple's developers are beyond normal; they are amazing.
This MAP application, however, seems to be not quite up to par.

Disk Utilities can not repair my disk - invalid node structure. How can I repair my disk? I have restarted with the CD.

Hi,
How can I repair my hard disk. Computer Starts up and then shuts down.
I've started up with the CD and disk utilities can not fix the disk, invalid node error.
How can I fix my disk?
I need to get to the file on the hard disk.
Thanks
Peter

With Disk Warrior can I start with a CD/DVD and get at the files on the hard disk?
With apple disk utilites I can not see my files that are on the hard disk.
If I could get at my files I could back them up and reformat my hard disk.

MacBook shuts down in the middle of booting up

Yesterday, when I was working on my computer, it restarted unexpectedly about 3 times. The last time, it shut down and did not turn back on. I let it be overnight and in the morning, I turned it on without any problems. I was working for a few hours when it shut down unexpectedly again. This time, when I tried to turn it on, the status bar got a little less than half way and then shut down again. Every time I try to turn my computer, the status bar gets to the same place then it shuts down. I tried to reinstall OS X but it says that my hard drive is locked. Does anyone have any ideas? Sorry I'm not very good with computers!

Hi, rhettschneider.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Jason H.

N80 dies in the middle of Software update

I just started the process of software update.
After it identified the phone, and downloaded the large 70 something MB of update, it started the actual update of the phone... when I got an error that the phone can not be updated. I tried a few time...nothing.
the screen that was blank...styed blank.... and now I am unable to restart the phone...
Any ideas.
My phone has the 4.0 firmware installed.
and I think it is a HongKong variant.

http://www.nokia.co.uk/nokia/0,8764,95600,00.html#15
The nokia FAQ for europe states the following:
15. Will the warranty be void if I update my phone software using Nokia Software Updater?
No, it will not.
and
38. My phone "died" during an update, what should I do?
Take the phone to your nearest Nokia service center. If the phone is within its warranty period, Nokia will repair the phone under the usual warranty terms and conditions. If the phone is not within its warranty period, Nokia is not liable for any loss as defined within the End-User Software Agreement.
I do not know if this is the same for USA, but it would be crazy if it isn't. I think it's really weird a phone bought in another country cannot be repaired it the USA..after all, it's still a nokia. So they have to give you the service for it.
btw: I've flashed my phone to death too last friday :'(.
She's on her way to get repaired now (takes about 3 weeks)...they couldn't fix it directly at the NSC.Message Edited by distel on 05-Nov-2006
03:34 PM

What to do when my Macbook air won't load from startup. It hangs in the middle during the black apple screen at the beginning

my Mac book air will not start up it hangs in the middle of the status bar when I turn it on and will not move.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

Start up in Safe Mode.
http://support.apple.com/kb/ph14204
Repair Disk Section: "Try Disk Utility"
http://support.apple.com/en-us/HT203176

Startup partition dies in the middle of booting, Invalid node structure?

Similar Messages

Maybe you are looking for