Startup Problem in Windows 2003 Server

Hi,
I was using oracle 9.0.2 with Windows 2003 & i had to format & re-install my machine.
Then I tried to install 9i Application Server & failed in between. But I noticed that the setup has already installed oracle 8i database instance. Then I quit configuring 9iAS & installed Oacle 9i (9.0.2) database. Then I upgraded the 8i instance with 9.0.2 with Database Upgrade Assistance.
Then I noticed when I start the instance with windows services & log in with sqlplus
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
errors occure. when I run following
c:\>sqlplus /nolog
SQL> conn sys/change_on_install as sysdba
SQL> startup
then the database starts up perfectly.
I thought this happens because of upgrade & then I created a new database instance but same problem is occuring.
Please help me...
Thank in advance.
Shaamil.

Thank you,
I did remove ORA_DBA from the administrator user. then I did change "logon as" option for "this account"
Now it's OK.
Regards, Shaamil.

Similar Messages

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

Crystal report problem on window 2003 server

Hi
We had developed a web based application using .Net 2.0 (C#) , Crystal reports (bundled version within VS2005) on Window XP, SQL Server 2005, we are able to see all the reports on this development enviroment, but when the application is deployed on Windows 2003 server , IIS 6.0 and SQL server 2005 , we are not able to view the reports we are thrown with an error as
Failed to open a rowset. Details: ADO Error Code: 0x Source: Microsoft OLE DB Provider for SQL Server Description: Procedure or Function 'sp_xxxx' expects parameter '@ppppp', which was not supplied. SQL State: 42000 Native Error: Failed to open a rowset. Error in File
Could you please explain what the problem is ? as we are stuck with this problem for the migration of application to the user community.
Regards
varma

We have same problem
does anyone have the answer?

Big problems with Windows 2003 Server and FX5900

Getting repeated lockups using MSI FX5900XT and Windows 2003 Standard Server. Mouse stops responding and system occassionally locks up completely. I have a dual boot system and windows XP works fine. Windows 2003 works fine if I use the standard VGA driver (I use 1600x1200 16bit 75 Hz resolution and refresh).
The event log usually says:
Event Log
Event Type:   Error
Event Source:   nv
Event Category:   None
Event ID:   108
Date:      18/07/2004
Time:      13:28:25
User:      N/A
Computer:   HOME
Description:
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a
problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your
hardware device vendor for any driver updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Presently using the latest drivers
Any ideas
Thanks
Will

IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   Creative SB Audigy   OK
IRQ 16   NEC PCI to USB Open Host Controller   OK
IRQ 17   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 17   NEC PCI to USB Open Host Controller   OK
IRQ 18   NEC PCI to USB Enhanced Host Controller (B1)   OK
IRQ 19   MSI MS-StarForce GeForce FX 5900XT (NVIDIA GeForce FX 5900XT)   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA nForce MCP Networking Controller   OK
IRQ 21   Standard OpenHCD USB Host Controller   OK
IRQ 22   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   OHCI Compliant IEEE 1394 Host Controller   OK

LAN Problem in Windows 2003 Server (LAN connection disabled)

I have installed LAN in Windows 2003 Service. But it shows LAN connection disabled. LAN connection is also proper.
I asked local vendor, he told me that it may due to virus problem. i do not want to format the machine against. i have very much useful data in it.
Kedar

Hi
Do you mean you have plugged in the network cable to the server and the network card showing disabled.
If its disabled in the network and sharing then you need to enable it.
If you can't see any network connection in the network and sharing form control panel then check if the network card driver has installed properly.
if you can see the network connection then simply right click and enable them.
Thanks
Umar

Oracle 8 installation problem on windows 2003 server

Hi!everyone
while installing i'm getting the message "could not delete the windows nt services". The error is coming for the service "OracleTNSListener".
any solution?...
any info whether oracle 8 support has been stopped for all platforms/specific ones ?...where do i get that info ?....
plz help..

Hi!
Is there any work around to that? Basically I have to test an upgrade from 8i to 10g on a Windows Server 2003 w/ SP1. I am not sure on what platform that 8i database is running on because is at a third-party location.

Problem in installing Oracle 9i R2 on Windows 2003 Server Enterprise

We are having problem installing the Oracle 9i R2 Server on Windows 2003 Server Enterprise Edition. During installation, it generates error saying "The IP Address of the machine not found". When clicking the "Continue" button, it tries to install other things but few minutes later it asks to stop complete installation or installation of that feature.
But when we installed it on Windows XP it works fine and we have no problem in configuring it. What's the problem with Windows 2003 Server?
If we drop the idea of installing it on Windows 2003 Server, can we make Windows XP maching as a Server?

ORACLE asumes that the first network device you have on your server has a fixed IP address.
Is this the case?
If not so you should install a loopback adapter as network device with a fixed IP.
Does this help?
Regards,
Lutz

Windows 2003 Server and BISE1: a painful way

Hi Forum !!
I consider my self as an advantage one in BISE1 matters. I've installed BISE1 many times on systems running Windows XP SP2 for proof concepts and as a lab environment for production systems setups. Following procedures "by the book" all BISE1 environments were work fine, and all issues are covered by the documentation.
But problems appear when we find Windows 2003 Server based systems. Even following step by step the installation process, we find different kind of problems. Thanks to metalink notes we could fix some, but there are others very strange at all.
For example, In a lab environment, running WinXP we successfully applied Database Patch P5337014 moving database version from release 10.2.0.1 to 10.2.0.3. Then we applied in the same lab environment Warehouse Builder Patch P6264457, moving OWB Repository version to 10.2.0.3.0 and OWB client to 10.2.0.3.33. Later, over a Production environment running Win 2003 Server, we follow the same procedure getting catastrophic results. When we applied the database Patch P5337014, database contro console service fails over and over again sending to the web browser a connection refused message. After a new installation, when we tried to apply the OWB Patch, the Control Center service doesn't work anymore, and none of the metalink notes we found appears to fix the problem.
It is just me or is anyone else who have faced this kind of problems with Windows 2003 Server ? What kind of workaround exists to solve this problems ?
Thanks, and your comments are welcome.

Hopefully you can help me too. My company just purchased a MAC BookPro and we all pc based with a PC Windows server. I have been trying to get this MAC to connect to the server. We need it to be able to access files and folder on the PC server to save and retrieve pc files.
I finally I it to where to do the GO > Connect to Server > Type in info > it brings up authentication information, we type in the domain and user name and password > but then I get an error saying the user name and password are not found.
Apple support told me it's now on the pc server side. I know the user name and password are correct. We have installed the Mac components on the server. I don't know if there are some other conflicts with the server or what to do.
Please let me know if you know of anything else I can try.

Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Problem in installing 10g R2 on Windows 2003 Server

Dear all,
We have a great problem when trying to install Oracle Standard Edition 10g to Windows 2003 Server. The procedure begins fine but at some point it stops (around 17% - 20%) without any Error Window.
The install actions log finishes like that:
"INFO: Method 'dispose()' Not implemented in class 'OiSuperAdminPasswd'
INFO: config-context initialized
INFO: *** Install Page***
INFO: Only Binary inventory exists for the Home :1
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'SE'.
INFO: Only Binary inventory exists for the Home :1
INFO: HomeSetup JRE files in Scratch :584
INFO: Setting variable 'ROOTSH_LOCATION' to 'C:\oracle\product\10.2.0\db_1\root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_SE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: FastCopy : The component info is ignored :oracle.swd.jre:1.4.2.8.0
INFO: FastCopy : The component info is ignored :oracle.swd.jre:1.4.2.8.0
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK"
Can anyone help with that?

Please post to the Database Installation forum:
Database Installation
This is the Oracle Applications (E-Business Suite) Installation and Upgrade forum.

Problem faced in viewing SVG elements in IE 7 in windows 2003 server machine

Hi All,
We are using SVG to use graphics elements in web page for our product. The web page contains HTML+SVG elements.
If we use an HTML Image element in our web page display and if we draw or configure SVG elements like rectangle or circle over the image element, then on viewing it in browser, the html image element overlaps the SVG elements and they get hidden behind the image.
Please help us in resolving this issue.
This scenarios works fine if we use browser IE7 in windows XP machine.
But on using IE7 in windows 2003 server machine, the problem is faced.
We have tried all possible and valid IE settings and properties to make the display work. But its helpless. The SVG plugin is also installed properly on systems. But still the display is not as intended.
I have attached the working scenario screenshot and non working scenario screenshot
The screenshot here contains an html image which is showing text as Incom tax department and on top of it is SVG element rectangle. This is viewed in Windows XP in IE 7 browser
This screenshot contains the same page above but when viewed in Windows 2003 IE 7 browser. The SVG rectangle is overlapped by the html image element here
Kindly please help us in this regard as we are unable to proceed further with this issue. If anyone of you have face this before, then please help us on the resolution. We will be very grateful
Thanks a lot.
Regards,
Shwetha

If you are using Dreamweaver to create your webpage, please post in the Dreamweaver forum. If you are hand-coding you might try posting in the Web Design forum. This forum is for help using the forums not for general tech support.

TNS problems in 9i on Windows 2003 Server

Goody day
I have installed Oracle9i Database (and 9i Developer Suite) onto an HP ML370 Server running Windows 2003 Server. My problem is that wherever I need to use the username / password for things like sqlplus, forms, imp, etc I get SERVICE_NAME errors, TNS adaptor protocol errors, Can't resolve SERVICE_NAME and many more in that description field.
Please help.
Thanks
William

You need to look in the listener.ora for the db you want to connect to (did you create one after installing Database product?). Then you need to verify that entries in tnsnames.ora of both DB and DS homes "matches" with listener.ora.
Other than that, it is more likely to have a chance to help out if you provide some details of actions taken and corresponding errors (exact codes and messages).

Problems with Tuxedo8.0 under Windows 2003 Server

Hello All.
Could you please help me?
When we were choosing which OS to install on our Tuxedo developers server we
decided
to try Windows 2003 server. We did not suppose that we could have any
problems
with this choise. But we have!
We use it with DB 7.2 workgroup edition and Tuxedo 8.0 (PatchLevel 172).
When one of server processes crashes (for example by exit(1) or by
exception)
(it happend not so rarely, because this server is actively used in
development
and testing processes) we cannot restart this server process!
When I write "restartsrv -i SrvId" in command line nothing happens.
When I write "tmboot -i SrvId" it says "Duplicate server".
When I write "tmshutdown -i SrvId" it just hangs and I have to wait for 10
minutes
while it says "CMDTUX_CAT:949: WARN: Shutdown failed. 0 processes stopped."
Tuxedo WebAdministration conlsole says almost the same - "Failed to
deactivate SRVGROUP/200
(still in state ACTIVE)-10:CMDTUX_CAT:1689: ERROR: Could not shutdown any
servers".
As a result any server crash (including expected) leads to 15 minutes
waiting!!!
As you understand it cound not be accepted!... and it is very annoying. :-)
This problem never happened under Windows 2000 server (a week before I
returned from site
installation where this software works fine under Windows 2000 server).
How can we solve this problem?
Or should we downgrade our OS to Windows 2000?
With regards,
Dmitry.

Dmitry,
Try a bbclean from the tmadmin command line to clean up the BBL so you will be
able to restart the server using the tmboot command.
In addition to this check the values for SCANUNIT and SANITYSCAN in the ubbconfig.
The observation that it takes 15 minutes for TUXEDO to discover that your server
has crashed suggests they have values that might be too high.
Winfried Scheulderman
"Dmitry Bond" <[email protected]> wrote:
Hello All.
Could you please help me?
When we were choosing which OS to install on our Tuxedo developers server
we
decided
to try Windows 2003 server. We did not suppose that we could have any
problems
with this choise. But we have!
We use it with DB 7.2 workgroup edition and Tuxedo 8.0 (PatchLevel 172).
When one of server processes crashes (for example by exit(1) or by
exception)
(it happend not so rarely, because this server is actively used in
development
and testing processes) we cannot restart this server process!
When I write "restartsrv -i SrvId" in command line nothing happens.
When I write "tmboot -i SrvId" it says "Duplicate server".
When I write "tmshutdown -i SrvId" it just hangs and I have to wait for
10
minutes
while it says "CMDTUX_CAT:949: WARN: Shutdown failed. 0 processes stopped."
Tuxedo WebAdministration conlsole says almost the same - "Failed to
deactivate SRVGROUP/200
(still in state ACTIVE)-10:CMDTUX_CAT:1689: ERROR: Could not shutdown
any
servers".
As a result any server crash (including expected) leads to 15 minutes
waiting!!!
As you understand it cound not be accepted!... and it is very annoying.
This problem never happened under Windows 2000 server (a week before
I
returned from site
installation where this software works fine under Windows 2000 server).
How can we solve this problem?
Or should we downgrade our OS to Windows 2000?
With regards,
Dmitry.

Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem

Hi Friends,
I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system on it.
It has got 6GB RAM and has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
I am running Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
The results of Prerequisite checker tool are satisfied except for one " SWAP SPACE VALUES"
I am getting the message as follows
"The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
How to increase this SWAP space value? Please let me know the procedure.
Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
What effect will I have if i proceed without meeting this requirement??
Suitable answers will be rewarded.
Thanks
Diwakar

OPen windows explorer and right click my computer
Select Properties
Click Advanced Tab
Click Settings (performance)
Select Advanced Tab
In virtual memory - click change.
Increase swap space/page file here.

Startup Problem in Windows 2003 Server

Similar Messages

Maybe you are looking for