Startup problem - no startup options

I've been having numerous problems with my X61 7675-CTO with Win Vista Business and most of them are due to Lenovo's system updates. But this one is a "residue" from when I had my computer sent in for service. Ever since, upon startup I hear three beeps: one long and two short ones. Furthermore, no buttons seem to work while starting the computer - not the blue ThinkVantage button, not F8 (to choose e.g. safe mode) and no other buttons. So when I have problems (which I do...) I cannot start the computer in safe mode, I cannot run Rescue & Recover and I cannot run PC Doctor.
I have tried everything I can think of, but I really have no clue why these startup options won't work. Will I have to reinstall Windows to get this to work? (I really, really don't want to do that.) Are there any drivers or updates I can apply to alleviate this problem?
Thanks.

bananaman wrote:
Unfortunately, per the Lenovo Secret Beep Decoder Ring, this means a problem with any of:
System board
LCD assembly
DIMM
Thanks, bananaman, that's real bad news.
It is "funny," however, that the sounds were there as I got the laptop back from Lenovo's technicians. Obviously, they don't do any testing whatsoever after having "fixed" problems (they replaced the system board). If they did, then wouldn't they have reacted to the beeps?
I noticed the beeps, but I didn't think much about it until some days ago when I started having BSOD problems and needed to boot in Safe Mode - but that was impossible due to no keys functioning. And now my warranty has expired... Any suggestions of what I can do? I can try calling Lenovo, but I don't think they have ever delivered a solution but to "send it in" - and that is, this time, the cause of the problem...
Or should I perhaps ignore the beeps and just continue using the computer. I've managed to get rid of the BSODs, so it seems to be working (for now...).

Similar Messages

MacBook pro when windows 7 has startup problem and Mac os doesn't work

I installed windows 7 on my MacBook pro and it did work well. But now windows has a startup problem and "startup repair" couldn't solve it, so I can't use both Mac os and windows and my laptop has become completely useless. Any suggestion?

Reboot and hold down command-R at the sound of the chime, that should take you to the Lion recovery partition, if it does go to disk utility and see if you have an OSX partition at all.

Startup Problem & "Zapping the Pram"

Okay, I'm having startup problems, and I did the Command/Option/P/R startup.
Next, I know that Command S, or Option S, something like that should take me to a startup equivilant of Disk Utility. It's been so long, I forgot what to do. I searched but cannot find the answer.
Hopefully someone here can help.
Thanks.

See http://docs.info.apple.com/article.html?artnum=106388
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh343.html
http://docs.info.apple.com/article.html?artnum=107392
for details on starting up in various modes.

Startup Problems After Upgrade to 10.4.8

Six weeks ago I upgraded my RAM by adding a 1Gb chip, and after checking to see that the added memory was recognized, I installed OS X 10.4.6 from my purchased DVD. I was then prompted to update to 10.4.8. For the first three weeks I used my iMac G5 with no problems. Then, with no apparent changes having been made, I began having Startup problems with my iMac. Every Statup go like this after pushing the Power button:
1) I get alternatively a black screen or the gray Apple screen frozen
2) I use the Power button to Shut Down, then Start with the Power button and get the gray Apple screen with cascading text error messages
3) I Shut Down and Start as in 2 while holding the Option-Command-P-R and get Desktop, but my applications repeatedly Quit Unexpectedly (Safari, Explorer, iTunes,etc.)
4) I Restart from the Apple Menu and get the Desktop and my applications usually work without Quitting.
I tried re-installing from my OS X 10.4.6 DVD (Archive and Install), but I get errors when the Installer gets to Prepare the Disk. Can anyone tell me what else I can do, or do I need to contact Apple Support?? Thanks,
ktanzoak

Only if you are able to boot into the desktop. If you are, follow the instructions on my FAQ:
http://www.macmaps.com/backup.html
for backing up your data.
If you aren't able to boot to the desktop, get Prosoft Data Rescue, and an external hard drive to attempt a recovery using the
http://www.macmaps.com/backup.html#RECOVER
directions on my FAQ.
Please let me know which procedure you are able to do and if you have any questions before you proceed.
In the future, always backup your data prior to installing any new software.

MSI eclipse plus startup problem

Hi,
I have the MSI eclipse plus motherboard, but I have a strange startup problem.
Sometimes my computer fails to start up. When I try again sometimes it works fine. (without changing any hardware or software configuration)
The Eclipse plus has a small D-led2 panel that shows information about the startup phases.
When my startup fails, the panel mentions: CPU init. And the error Code is FF (this means: power on and first initialize CPU)
(This is the phase just before DDR init).
So the startup fails in a very early stage of the startup process, (before I can access my bios)
When the start up fails, I have to disconnect the power cable, reconnect and try to start again. This is a very uncomfortable situation.
I have the latest BIOS version 21/04/2009 V1.0
I tried the fail-save default options in the bios.
My processor is i7 940
RAM: OCZ DDR3 . 6 pieces of 2GB. 1600Mhz (3 dual channel kits)
Power supply: Corsair 1000Watt
I hope somebody can help me.
Thanks in advance

Please note that the memory controller was moved into the CPU with the i7 - it is no longer part of motherboard chipset (MCH). You're not the first and probably won't be the last to buy the wrong type of DDR3 memory for your i7 rig. People, before you buy; check if the memory you are handing money over for is actually suitable for your CPU. Simple really as they will state they are i7 compatible. The i7 has a recommended maximum voltage of 1.65V for the integrated memory controller, 1.9V is probably a dangerous voltage to set it to (if the BIOS even allows it). To quote the OCZ FAQ:
Quote
The memory supply voltage also powers the receivers and senders on the memory controller with a voltage plane known as VDDQ. Because the Corei7 is manufactured on a 45 nm node, the logic is sensitive to overvoltage and Intel defines the upper safe limit for the Core i7 as 1.65V.
So to answer your question:
Quote
I still have one question: What do I risk with my DDR3 memory that is standard at 1.9V
More than likely, the integrity of the i7 940 itself. You have to ask yourself, "What's cheaper to replace... the RAM or the CPU?" The answer should be simple enough to work out for the average user.
I'd be taking the RAM back if at all possible and exchange/upgrade it for an i7 compatible kit (which will be three/six stick tri-channel, not two/four sticks dual-channel) designed to operate within the 1.5V~1.65V recommended voltage range. The OCZ equivalent (comparing what you currently have) to what you want would be this range.

Startup problems after battery change

My G4 Desktop, now getting on for 6 years old, but working perfectly until recently, needed a battery change on the mainboard as the clock was having problems. However this has led to startup problems: initially, following the startup chord, the computer wouldn't start at all. After some online digging, I found references to the CUDA button/zapping the PRAM. I can now restart by resetting CUDA, but the computer usually won't restart or even start from power off, meaning I have to go back to the CUDA button every time. The computer also fails to recognize the installed RAM, except for 128MB, corresponding to one of three RAM strips.
Apart from the battery, the only other likely contributing factors are that the computer's been shipped internationally recently (however, it was professionally packed and shipped, and made its first restart after this move without problems). The other potential factor is the switch in voltage, from 240 to 110, but that was handled normally by switching over on the back of the case.
I would really appreciate any advice that can help me get this old clunker back in action, and with all RAM recognized. Nice as an upgrade would be, it's not a strong option for me at the moment, and I'm otherwise satisfied with the G4 anyway.
Powermac G4 Desktop Mac OS X (10.4.2)
Powermac G4 Desktop Mac OS X (10.4.2)

Hi, Yukiguni!
You sure have an interesting problem...
You might review Texas Macman's tutorial at the following link:
http://www.geocities.com/texas_macman/pram.html
I'd check that replacement battery with a voltmeter to insure that it's good. ("New" isn't necessarily synonymous with "fresh".)
You might try completely de-energizing your Mac. In the link above, there's a Tip just above the Battery section that refers to what to do when sometimes computers lose their mind. This procedure oftentimes works to reset a PMU/CUDA that seems to refuse to reset properly and retain the correct startup parameters.
If you can get the Mac to boot from disk again, you might run the Apple Hardware Disk. Definitely run Repair Disk from the install disk if you haven't already done so and can get it to boot from disk. (You might try booting to the Startup Manager by holding down the option key at startup and trying to select the disk from there. Your best bet for success is to do so just after resetting the CUDA/PMU.)
Gary

I am having an MacBok Pro 13inch,having an Startup Problem, the time i press the power button after few seconds the apple symbol appears w/a loading sign below it

i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?

luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status:

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

Read these.
http://support.apple.com/kb/HT1431
http://reviews.cnet.com/8301-13727_7-10330118-263.html

Dual Monitor Startup Problem on MacPro - Solved

I have a model 53135LL/A = mid 2010 MacPro with 8 cores, DUAL monitor cards and monitors, 24GB memory, running Lion 10.7.3. It is important to note that I am also using the Apple bluetooth Magic Mouse and the smaller, bluetooth keyboard (no numeric keypad). This unit was supplied with Lion in December 2011 and has had a startup problem from the beginning as follows:
1 - when starting from a cold start the dual monitor positions are reversed from the correct position
2 - additionally the USB and firewire connected devices (e.g. Wacom tablet, 2 card readers) do not function properly.
The workaround for me has been to start the system, wait for the logon screen, then click restart. Upon restart everything comes up and functions correctly.
Specifics on my setup and starting problems:
1 - My main monitor (Monitor #2) is a large gamut monitor that is located to the right. This monitor is connected to card slot 1 as that is the faster card slot (pcx16). The second monitor (Monitor #1) is an ordinary unit and connected to card slot 2 (pcx4). The monitors are set up as an extended desktop.
2. The Wacom tablet (Intuous 3 wide) is connected to USB port on rear of machine. CF card reader by Delkin is connected to Firewire on rear of machine, and an SD card reader is connected to USB on the rear of the machine.
3. My dock is positioned on the left side of the left monitor. The menu bar is along the top of the left monitor, and all desktop icons are on the left monitor. The right monitor has no items on it.
On a typical cold start, as mentioned above, the apple logo appears on the right and then the logon screen appears on the right.
If I proceed to logon at that point, all the desktop items move to the right monitor and the computer thinks the positions are reversed. In other words, it behaves as though the right monitor (#2) is on the left of the desktop and left monitor (#1) is on the right.
Additionally, the Wacom tablet using either pen or mouse does not map over the full desktop range. If I use either card reader and then eject the card, no further card insertions will be recognized.
To fix this, I simply restart the machine thru the apple menu and everything comes up correctly.
I had discovered, that instead of completing the logon on a bad cold start, I could simply restart from the logon screen and all would work correctly.
On occasion, the logon screen would come up on the left monitor (as it should do) and in that case, if I log on all works correctly.
I have worked with Apple support on the phone, clearing setup ram etc. Have had the unit in to Apple store for hardware check, all OK. Next suggestion was reload OS and start over - no thanks.
SO - Here is the latest.
If I turn off my keyboard and mouse before starting the machine, then wait for the logon screen to appear - It starts correctly, with the logon screen on the left. I can then turn on my keyboard and mouse and all works as it should.
Bottom line - there appears to be a startup issue with Bluetooth devices from a cold start. Note that once the machine has been used for a bit, I can turn it off for short periods of time (e.g. 30 minutes) and it will start correctly even with the mouse and keyboard turned on.

mkaito wrote:
That's how dwm behaves. I believe dwm's multihead support is rather lackluster out of the box. You might want to check out some of the patches they have, and ask around in the dwm hackers thread.
I currently have dwm simply draw status on all monitors, but I'm investigating separate status bars per monitor. We'll see where that takes me. Dwm is a tinker's WM!
i found the patch , thanks!

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?

What did you "put as slave?" What Mac model do you have, exactly?

Startup problems and many other problem... APPLE CARE DON'T FUNCTION !!!!

Hi, and sorry for my bad english...
I have imac 27" refurbished bought on september 2010. When startup process proceed correctly and i can use the computer, there are many many many "blocks" of normal operating: it appears the colored circle and the system is always "busy", although there are no application open!!! When skype is open, it always lost the already saved password. Safari lost all the login saved password. I can't drag files into the basket or create a folder! (message error).
But the big problem is: startup process failure almost always!!! Startup is ok only if the computer was off during some hours. After the first startup, i can't restart (manual or automatic restart, in any case...) it appears green screen with the green apple, and the rotating cirle forever.....
So, i have tried many solution:
- check and repair HD using utility disk: FAILED
- check and repair permits using utility disk: FAILED
- format the HD using utility disk with OsX dvd: FAILED
- reinstall OS X: FAILED
I gave the iMac at applecare centre to repair, two times!! 2 TIMES in 1 month !!
- first time: replaced HD
- second time: replaced mother board
In both times, the repairs DON'T FIX THE PROBLEMS....
THE PROBLEMS REMAIN THE SAME (like a led zeppelin song...)
So, i think: maybe the cause was not the HD, maybe not the mother board... WHAT'S THE PROBLEM?????
Even the autorized apple assistance centre can't find e repair the problem, what i have to do???
I think that Apple should replace the product or refund me...
but, i know, APPLE THINK DIFFERENT...
help me

thank you den.thed!
But, i have already called Apple Support... they say to me "deliver your mac at an apple assistance centre"... for 2 times, and tomorrow i will do it again...
I'd like to find in this forum some answers about some little questions. I try to do it:
1) when i try to initialize "Macintosh HD" appears this message: "Disk initialize failed - POSIX reports: The operation couldn't be completed. Cannot allocate memory". WHY? WHAT DOES IT MEAN?
2) If i try to reinstall OS X appears. "IMPOSSIBLE TO INSTALL MAC OS X ON COMPUTER". WHY?
Thank you very much!

Can anyone diagnose my startup problem from this screen pattern?

After failing to startup my Mac on about 8 consecutive attempts today, I finally got it to boot up, and now I'm afraid to turn it off for fear that I won't be able to re-boot.
Here's a photo of what kept happening:
http://www.doctorkeys.com/startup-problem-screen.html
This screen came up immediately, along with the spinning cog and the apple logo, both rather faint. But then those two disappeared, and all that was left was the gray screen with the pattern as shown in the photo. And that's as far as I got each time.
The display itself seems to be fine, because even when I couldn't use it with the Mac Pro, I was able to hook it up to my MacBook Pro and it worked fine.
Can anybody tell me what's happening?
Thanks,
Bruce Siegel
Message was edited by: Bruce Siegel

Hi-
To be honest, though, I was hoping that the pattern in the photo was so specific and common that someone would look at it and say, "Oh, of course! I've seen THAT one before. Do this and your problem is solved."
I have seen graphics cards produce that type of screen as a result of a few of situations.
One, if the card is miss seated.
One other is if a capacitor on the card has failed, while VRAM failure is another cause.
The first case is easy to fix; remove and reseat.
The second and third require replacement of the failed graphics card.
Cleaning the gold contacts with 99% isopropyl alcohol and thoroughly dusting the card while it is out is a good idea.
I have been able to replace a bad capacitor to restore a card, but luck was a big part of determining which one it was....

Startup problem with Lion OS 10.7.3

Just recently, I've been experiencing a startup problem with Lion. I don't usually have any issues running my Mac, so I'm at a loss why this is happening now.
I have an Intel Mac Pro running 10.7.3. I usually leaving my Mac running all the time and only restart when the need arises. In addition to being my main computer, this mac alsocontrols a MacMini that serves as a music server thru screen sharing.
This past weekend, I restarted my Mac and could not get past the grey screen. The mac chimes, the apple logo appears with the spinning gear, the blue screen briefly appears, but instead of progressing to the desktop it reverts to the grey screen with a repeating cycle of the spinning gear appearing (spins for a while, stops, disappears, reppears spinning, stops, disappears, over and over) - never progressing beyond that stage.
I decided to reinstall the system and things have been fine for the past few days. Today, restarting again resulting in the same problem.
I've tried several things without success. I disconnected all peripherals, reset the PRAM/SMC, ran Disk Utility from a install volume and ran repair and permissions (no problems reported). Tried safe mode startup - a progress bar appeared but never fully progressed and could not get to the desktop.
Recent changes included updating the OS to 10.7.3 and Adobe Photoshop CS5.5 - no recent hardware changes. No bluetooth devices connected.
Any thoughts? Thanks -

Thanks -
I've reinstalled the OS today and am back up and running.
But, since this is twice this has happened within the past week, I'm worried about might be causing this issue - besides bad luck. My Mac is usually rock solid - can't remember the last time I've had to reinstall the OS in the past few generations of OS X.

Problem in startup of Shadow Instance (START_SHDI_FIRST)

Hi Experts
I am having problem in 4.6B - ERP6.0 Upgrade. I have problem in startup of Shadow Instance. Here is log description.
DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
Thr 01 Fri Feb 22 19:53:01 2008
Thr 01 MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 7614
Thr 01 ***LOG Q01=> MsSInit, MSStart (Msg Server 1 7614) http://msxxserv_mt. 1824
Thr 01 SigISetDefaultAction : default handling for signal 18
Thr 01 load acl file = /usr/sap/put/<SID>/SYS/global/ms_acl_info
Thr 01 MsGetOwnIpAddr: my host addresses are :
Thr 01 1 : http://192.168.21.21 <hostname> (HOSTNAME)
Thr 01 2 : http://127.0.0.1 localhost (LOCALHOST)
Thr 01 MsHttpInit: full qualified hostname = <hostname>
Thr 01 HTTP logging is switch off
Thr 01 ms/icf_info_server : deleted
Thr 01 *** I listen to port sapmsSHD<SID> (3602) ***
Thr 01 CUSTOMER KEY: >L0506167855
trc file: "dev_rd", trc level: 1, release: "700"
Fri Feb 22 15:25:15 2008
***LOG S00=> GwInitReader, gateway started ( 1059) http://gwxxrd.c 1691
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 1059
gateway runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
gateway (version=700.2007.10.01)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw02 (socket) to port 3302
GwPrintMyHostAddr: my host addresses are :
1 : http://192.168.21.21 <hostname> (HOSTNAME)
2 : http://127.0.0.1 localhost (LOCALHOST)
Full qualified hostname =
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri Feb 22 15:25:20 2008
DpShMCreate: sizeof(wp_adm) 70080 (960)
DpShMCreate: sizeof(tm_adm) 51017496 (25496)
DpShMCreate: sizeof(wp_ca_adm) 184800 (88)
DpShMCreate: sizeof(appc_ca_adm) 8800 (88)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/8/2192040/2192048
DpShMCreate: sizeof(comm_adm) 2192048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1840)
DpShMCreate: sizeof(wall_adm) (224040/346312/80/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: ffffffff5bc00000, size: 54051296)
DpShMCreate: allocated sys_adm at ffffffff5bc00000
DpShMCreate: allocated wp_adm at ffffffff5bc01cc0
DpShMCreate: allocated tm_adm_list at ffffffff5bc12e80
DpShMCreate: allocated tm_adm at ffffffff5bc12ee0
DpShMCreate: allocated appc_ca_adm at ffffffff5ece77d8
DpShMCreate: allocated comm_adm at ffffffff5ece9a38
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at ffffffff5ef00ce8
DpShMCreate: allocated gw_adm at ffffffff5ef00d68
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at ffffffff5ef00d98
MtxInit: -2 0 0
Fri Feb 22 15:25:26 2008
GwDpInit: attached to gw_adm at ffffffff5ef00d68
Fri Feb 22 15:25:44 2008
caught SIGINT (2)
***LOG S30=> GwStopGateway, gateway stopped () http://gwxxrd.c 14586
STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080222195300")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SW<SID>H"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/<SID>/homeshd/<SID>
4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/put/<SID>/homeshd/<SID>:/usr/j2se/jre/lib/sparc/c
lient:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/oracle/<SID>/102_64/lib:/usr/sap/I
TC/SYS/exe/run:/oracle/client/10x_64/instantclient
4 ETQ399 2008/02/22 19:53:00: put_execute: (startsap) forkpid:7500
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
Please let me know if you have any ideas.
Thanks & best Regards
L Raghunahth

Hi ,
I am forwarding the dev_w0 log.
dev_w0 ==> log is as follows
M Fri Feb 22 15:25:26 2008
M ab_init o.k.
M ThrInitGlobals o.k.
M ThrCreateShObjects           allocated 150834 bytes at ffffffff52200000
M SosRegisterMemAddr: add mem addr ffffffff52200000 / >thr_serv_info<
M SosRegisterMemAddr: add mem addr ffffffff52200010 / >thr_wpadm<
M ThrCreateShObjects o.k.
M SosRegisterMemAddr: add mem addr 1050aace0 / >ztta<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr 105328a60 / >spa<
M ThrRegisterMemAddrs o.k.
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegWpWriterJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegWpJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegUsrJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegMemJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegSysJavaNatives failed (-1)
M ThrInitRunTime o.k.
M ab_startup o.k.
N SsfSapSecin: putenv(SECUDIR=/usr/sap/put/<SID>/DVEBMGS02/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/put/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
M load shared library (/usr/sap/put/exe/libsapsecu.so), hdl 1
N ===...sucessfully completed.
N =================================================
M
M Returncode of AlMCCreateAttach (): 50
M Returncode of AlMOCreateAttach (): 50
M Returncode of AlSmesCreateAttach (): 50
M *** Start of API function likey_init ***
M likey_init: sid = "<SID>"
M likeymem_calloc (2, 21) for type "List of the SW products" returns 1050a55e0.
M likey_init: products [0] = "R3_ORA              "
M likey_init: products [1] = "R3_BASIS            "
M likey_init: basis_release = "700"
M likey_init: temporary license keys allowed.
M likey_init: running within the SAP WebAS ABAP.
M Generated absolute filename of the verify PSE: "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerif
y.pse"
M PSE name "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" memorized.
M The contents of the PSE file "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" is the 2038
version.
M SAPSECULIB initialized by calling SsfLibGetToolkit ().
M likeyper_init: insert_record memorized.
M likeyper_init: update_record memorized.
M likeyper_init: delete_record memorized.
M likeyper_init: get_record memorized.
M likeyper_init: get_all_records memorized.
M likeyper_init: cleanup memorized.
M likeyche_get_existing_buffer: buffer found in EG memory.
M likeyche_get_existing_buffer: magic number okay, reserved entries = 5, used entries = 0
M *** End of API function likey_init ***
M SAPlicense: LIKEY initialisation done
M ThBtcClnZombies o.k.
M Enq-Reset-Registration o.k.
M SosRegisterHook: add hook >rsts_storage_free(101a2ee78)< for event AFTER_STORAGE_FREE
M SosRegisterHook: add hook >rsts_before_commit(101a2efb0)< for event BEFORE_COMMIT
M SosRegisterHook: add hook >rsts_after_commit(101a2f098)< for event AFTER_COMMIT
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK_WOR
K
M SosRegisterHook: add hook >rsts_after_rollin(101a2acd0)< for event AFTER_ROLL_IN
M SosRegisterHook: add hook >rsts_before_rollout(101a2acec)< for event BEFORE_ROLL_OUT
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M DpISetTrcLog: sw<SID>h off trace logging global is off
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M ThSetTrcLogParam2 o.k.
M register db commit/rollback hook o.k.
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M MskiInitLogonTicketCacheHandle o.k.
M ThrtRegisterJCoNatives o.k.
M JrfcVmcRegisterNativesDriver o.k.
M ThJRegNatives3: java not active
M EnqVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JMonVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JTSAuthorityRegisterNatives failed
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ipl_Init returns 2 ITSPE_DISABLED: Service is disabled (sapparam)
M SosRegisterHook: add hook >DbgBeforeSessionEnd(100495c64)< for event BEFORE_SESSION_END
M SosRegisterHook: add hook >DbgBeforeTaskSw<SID>h(10049575c)< for event BEFORE_TASK_SW<SID>H
M ThDbgInit returns 0
M ThJRegNatives3: java not active
M ThDSysEnv: delete environment
M REL WP ca_blk 56
M ThDtWpBlk: detach WP ca_blk 56
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThIEmFree: delete hyper context (hyperHdl=fffffffdd99f1e60)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M set act fields to T-1/M255
M ThSetProcessPriority o.k.
M SosRegisterMemAddr: add mem addr ffffffff57412e80 / >tm_adm_list<
M SosRegisterMemAddr: add mem addr ffffffff57412ee0 / >tm_adm<
M SosRegisterMemAddr: add mem addr ffffffff57401cc0 / >wp_adm<
M SosRegisterMemAddr: add mem addr ffffffff53000000 / >wp_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4ba5f8 / >wp_ca_adm<
M SosRegisterMemAddr: add mem addr ffffffff5a4e9a38 / >comm_adm<
M SosRegisterMemAddr: add mem addr ffffffff5702edc0 / >appc_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4e77d8 / >appc_ca_adm<
M SosRegisterMemAddr: add mem addr 0 / >vmc_adm<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr ffffffff57400000 / >sys_adm<
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M db_commit98 (keep resources) o.k.
M SigSave o.k.
M rdisp/rfc_use_quotas : 1
M rdisp/rfc_max_queue : 5
M rdisp/rfc_max_login : 90
M rdisp/rfc_max_own_login : 25
M rdisp/rfc_min_wait_dia_wp : 1
M rdisp/rfc_max_own_used_wp : 75
M rdisp/rfc_max_comm_entries : 90
M rdisp/rfc_max_wait_time : 15
E Fri Feb 22 15:25:29 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M init lock table o.k.
M ThrSetMemHdl o.k.
M ThInit o.k.
M SigIRegisterExitRoutine: exithandler installed (ThSigHandler)
M TskhLoop: tell dispatcher: I'am ready for processing
M LOCK WP ca_blk 56
M LOCK APPC ca_blk 2
M ThIEndBg: end background processing of T-1 (type=0x41, logoff=1, freeResources=0)
M ThISend: (tm/user/type/info = -1/           ?/0x41/0x0, mode_deleted=1)
M    TASK_SW<SID>H
M    DISP
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_sw<SID>h=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThDtWpBlk: detach WP ca_blk 56
M ThISend: clear stat record
M PfClearAllRec: clear statistic area
M ThISend: stat_state = TH_STAT_CLEAR
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 56
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 18)
M -OUT- sender_id WORK_PROCESS      tid -1    wp_ca_blk   56      wp_id 0
M -OUT- action    SEND_TO_DP        uid -1    appc_ca_blk -1      type NOWP
M -OUT- new_stat WP_WAIT           mode 0     len         8       rq_id 18
M wake_evt_udp_now 1, no dgram needed
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SW<SID>H
M TrThHookFunc: called for task sw<SID>h
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >DbgBeforeTaskSw<SID>h< for event BEFORE_TASK_SW<SID>H
M
M ********* W0 LOOP (DIA) *********
M TskhLoop: save spa pointer 105328a60 and install dummy spa
M ThRqWaitFor: wait for next request (new time slice)
M event-handling: W0, key 50240, flag 50240
M ThAlarm: no previous alarm
M ThRqWaitFor: wait for request
M Fri Feb 22 15:25:42 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ThDBDisconnect: disconnect from data base
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time
DBHost
B 000 000 R/3              000000000 INACTIVE     NO YES NO 000 255 255 20080222 152515
<hostname>
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=105b54538,usrhp=105b51478)
C Detaching from DB Server (con_hdl=0,svchp=105b54538,srvhp=105b56868)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=2, com_tx=0)
B statistics db_con_rollback (roll_total=0, roll_tx=0)
M ThDBDisconnect: disconnect o.k.
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1060) [dpuxtool.c   260]
M Good Bye .....
Best Regards,
L Raghunahth

Startup problem - no startup options

Similar Messages

Maybe you are looking for