Startup problem with notebook not booting. complained of primary internal (601) problem

Repeated booting sequence and notebook not booting fully to Windows. Complaining of battery internal (601) error.
How do i get my notebook to complete the startup process without changing the battery?

Hi,
The 601 error does mean you'll need to replace your notebooks main battery - you can find more details on battery error codes Here.
While the battery is still connected, even if you clear the cmos, the error code will simply generate again so in the meantime, you should be able to avoid the error code if you shut down the notebook, unplug the AC Adapter, remove the battery and run the notebook just on the AC Adapter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Problems with 7970 not booting.

I have a 7970 that won't boot. Screen is blank, but the bottons work when I ry to factory it, so I know it's not totally bricked. I've tried to factory the phone with both "3491672850*#" and "123456789*0#" methods, but no matter what I try, it doesn't seem to want to suck up all the files from the TFTP server. I get a bunch of different results:
Sometimes it will suck down term70.default.loads, then hang.
Sometimes it will suck down term70.default.loads, then suck the same file down again, then hang.
Sometimes it will suck down term70.default.loads, then jar70sccp.8-3-2-27.sbn, then hang.
Sometimes it will suck down term70.default.loads, then jar70sccp.8-3-2-27.sbn, then jar70sccp.8-3-2-27.sbn again, then hang.
Sometimes it will suck down term70.default.loads, then jar70sccp.8-3-2-27.sbn, then cnu70.8-3-2-27.sbn, then hang.
I have the phone connected to a Linksys switch. A 3825 connected to the Linksys and my laptop connected to another port on the linksys. The 3825 is the DHCP and TFTP server. The files were taken off of CCO directly, so I know they're not corrupt or anything.
I've been able to ping flood the 3825 from my laptop with no packet-loss and the phone auto-negotiated to 100/full on the linksys, so by all indications the network is fine.
Something I'm missing?
term70.default.loads references these files, in order:
jar70sccp.8-3-2-27.sbn
cnu70.8-3-2-27.sbn
apps70.8-3-2-27.sbn
dsp70.8-3-2-27.sbn
cvm70sccp.8-3-2-27.sbn
ip dhcp pool voice
network 10.0.0.0 255.255.255.0
option 150 ip 10.0.0.2
default-router 10.0.0.2
interface GigabitEthernet0/0
ip address 10.0.0.2 255.255.255.0
load-interval 30
duplex auto
speed auto
media-type rj45
tftp-server flash:SCCP70.8-3-3S.loads
tftp-server flash:cvm70sccp.8-3-2-27.sbn
tftp-server flash:jar70sccp.8-3-2-27.sbn
tftp-server flash:apps70.8-3-2-27.sbn
tftp-server flash:cnu70.8-3-2-27.sbn
tftp-server flash:dsp70.8-3-2-27.sbn
tftp-server flash:term70.default.loads
telephony-service
no auto-reg-ephone
em logout 0:0 0:0 0:0
max-ephones 144
max-dn 500
ip source-address 10.0.0.2 port 2000
load 7970 SCCP70.8-3-3S
dialplan-pattern 1 4165551212 extension-length 4
max-conferences 12 gain -6
transfer-system full-consult
secondary-dialtone 9
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 11 dual-line
number 1001
name Jason Lixfeld
ephone 1
mac-address 0019.563D.CC55
type 7970
button 1:11

Hi,
I actually tried something stupid. Maybe I did not realise it while i did it but later on knew that both phones are now useless. I tried factory resetting my 7970 phones without a power brick. Now i just have 2 phones which just wont boot up. I tried everything I found on teh internet. tired using uploading load files using cme4.3 and cucm 4.3. tried upgrading firmware with the latest firware but it is just stuck and after about 3 months i now feel that i've lost my phones for good. all that happens is the line buttons keep blinking and the headset button is green and the mute button is red. When i tried using call manager express, i used a debug on the router and i can see phone asking for an ip address and also for teh firmware and my tftp providing it. after all that is finished i see no outputs and the phone still wont start. the screen is blank and i cant see anything on it. tried teh factory reset and all other possible things but still stuck. COULD SOMEONE PLEEASE HELP ME OUT.!!!

Problems with iPod not booting up, not turning off, not responding.

So as of yesterday... if the iPod Touch is plugged in to the comp to sync up, things are generally fine. I can even unplug it for about 5 minutes and things are fine. Battery is fully charged, all content appearing normally. But, suddenly it wil cycle between about 10 seconds of totally black screen, to 10 seconds of silver apple logo, and back to black screen, and I can't seem to turn it off or reset it or get it to come back to the home screen until I plug it in to sync again. Tried resetting settings, no improvement, tried restoring from iTunes, no improvement. Just those two screens flickering back and forth, again and again. Anyone know what this is?

Anyone? Crickets? After a second restore (where first I let the battery drain, THEN did the restore the second I plugged it in) it is still crashing (to the flashing black, apple logo, black, apple logo business) but now I can almost always hold the buttons in long enough to get it ask me if I want it to power off, then I say no, then it returns to the home screen, where it will appear to work before another crash a few minutes later.

HP 250 G3 - problems with Windows 10 boot

I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.

SomeoneWithAnHP wrote:
Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re: Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO. Didn't help. for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup. I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk. Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this. My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem? Mine has Radeon graphics which was a bit unusual at the time. I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave.

When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync my ipod. Has anyone had a problem with itunes not recognizing an ipod?

When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?

Hi sarahdavis0_o,
Welcome to the Apple Support Communities!
If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a great day,
Joe

HT5312 So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

If you mean that you aren't getting the reset link, then from the page that you posted from :
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
You can contact iTunes Support in your country via this page : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

RFIDITVCL : problem with variation notes

Hi Experts,
I have implemented the sapnote 1639418 "RFIDITVCL: 3000 Euro Communication additional changes", but I have a problem with variation notes related to specific invoices in same year...the user guide in the note says that they are clubbed together and the total is compared with the limit...I think that the report doesn't function in this case (my case is higher 25000u20AC) and so my documents aren't in the list....
Do you have the same problem??
Thank you
Best regards
Angela

Dear Angela,
I have the same problem. The program looks at field BSEG-REBZG.
However this field is empty in our case.
We create our debit and credit memo's with reference to the original sales order.
Who knows a solution?
Roelie

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please?

I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3

Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problems with IE8 "not responding" on windows 7

I have a Toshiba Satellite L-355 that has been upgraded to run Windows 7 Home Premium from Windows Vista. I've been having problems with IE8 "not responding" and have tried running it without add-ons, system restore, and banging my head against the wall. All to no avail. Does anybody have any ideas how to fix this? I've tried running other browsers with the same problems.

Intel(R) HM55 Express Chipset LPC Interface Controller
Thanks, sav! That's perfect. (Good to know it shows up in Device Manager for people, too.)
Okay ... although it's the Intel P55 and PM55 chipsets which get all the press about cranky Touch/iPhone connections on Windows 7 systems (the 0xE0000065, -6999 and "Disk can not be read or written to" error messages are the most common, although symptoms can vary further than that), similar sorts of issues look like they could strike other Intel 5-series chipsets ... including your HM55.
So I'm proceeding precisely as I would with someone with a PM55 chipset.
*1) Dell updates*
Some folks with 5-series chipset trouble have got past it by way of BIOS updates. So I thinks it's worth your heading to your Downloads page at Dell, and checking to see if there's any newer versions of your BIOS lurking there. Unfortunately, with the Studio 15s I'm never precisely sure which is the correct downloads page ... so I'd try going to the following Dell page:
http://support.dell.com/support/downloads/index.aspx
... enter your service tag, and then drill through to your downloads page.
Any improvement with your syncing performance after applying any available BIOS updates at Dell?
*(2) Adjust power management setting on USB controllers*
If no joy after updating (if you were behind on your BIOS version), try applying the measures from the following document:
[iPod not recognized when connected to Windows laptop over USB|iPod not recognized when connected to Windows laptop over USB]
Reboot the PC after making the changes, and then try another sync. Any improvement?
(If either set of measures improves your sync performance, please post back to let us know which one helped for you.)

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail. Apple tech support was worthless.

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Noticed the problem a couple of days ago.
Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail.
Apple tech support was worthless on both issues.

Hi I am also in the UK, but not with Tiscali and am having the exact same problems. I can also send with wifi, but not 3G. I have tried amending all sorts of settings, including those above and amending the smtp server to the settings for my provider, but all to no avail.
It is thoroughly frustrating, as I cannot send emails unless I have wifi access.
Any further suggestions would be very welcome.

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post wont work as it

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7

Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps.

Problem with windows not liking any files named prn

I recently found a problem with windows not liking any files
called prn.html, prn.cfm etc etc. If you try and create a file like
prn.html then it will say "File already exists".
I initially thought it was a Cold Fusion error as I was
getting some bizarre error messages when trying to write prn.html
using cffile.
Does anyone know a work around for it?

Hi,
Not only "prn" but also for the terms like "AUX", "NUL" you
can't create any directories or files in Windows because these are
reserved terms with Windows which is meant for some device
drivers...

Startup problem with notebook not booting. complained of primary internal (601) problem

Similar Messages

Maybe you are looking for