Startup problem with window Pavilion G4

I have HP pavilion G4 series laptop running windows 7. Itiatially system slowed down & then windows is unable to load. I get message
WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE
Two options:
launch startup repair or
Load normal window
Both are not working & blue screen with mouse cursors come but nothing happens later on for both options.

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • How to fix starting problem with hp pavilion a618x

    Screen freezes on HP logo screen computer won't start.

    Gilly777, welcome to the forum.
    With a computer of this age there could be several causes for the computer freezing.  However, I believe that It could be a failing/ed power supply unit (PSU).  A failed PSU can cause numerous types of problems.  Here is a guide to help you troubleshoot the problem.  Be certain to use the link titled "Resolving Startup Problems in Windows XP, ME and 98". 
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HP 250 G3 - problems with Windows 10 boot

    I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.

    SomeoneWithAnHP wrote:
    Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re:  Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO.  Didn't help.  for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup.  I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk.  Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this.  My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem?  Mine has Radeon graphics which was a bit unusual at the time.  I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave.  

  • Problem with windows and my monitor in after effects

    HI . before any thing excuse me for speeking english.
    i have a problem with windows in after effect in my monitor
    my monitor is 15.6 and resolution is 1366*768
    for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
    Thanks.

    Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
    Mylenium

  • Hi anyone having a problem with windows 7 and itunes

    Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

    Yes, I am also having trouble with my windows 7n.  I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

  • Problems with Windows XP SP3 in Boot Camp

    Hi,
    I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
    Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
    Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

    Problems with Windows XP SP3 in Boot Camp
    Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

  • I am having a problem with Windows Fusion installed on a MacBook.

    I am having a problem with Windows Fusion installed on a MacBook OS 10.  When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
    I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
    I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
    Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
    Any help would be greatly appreciated.
    Thank you very much.

    HartEJ wrote:
    ...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
    If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
    If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
    http://www.apple.com/itunes/
    If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
    If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
    1. Open the control panel
    2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
    3. Navigate to "Apple Software Update" in the list and click on it
    4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
    Once you repair this, try running iTunes and the update again.
    Fingers crossed!

  • Problem with Windows Media Player since installing Firefox 4.0

    Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

    What can I do to get the Windows Media Player to work properly?

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • Photo sync problem with Windows Vista?

    I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
    Thanks,
    Dean.

    I checked out the article and not much help, thanks anyway.
    Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
    If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
    Thanks.

  • Problem with Windows 8.1 and Corseca Byte BT headset

    I recently bought a Corseca Byte bluetooth headset.
    The headset works fine with phones.
    Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
    The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
    and restart it works fine unless it lays unused for some time.
    Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
    Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
    How to solve the issue?

    Hi,
    Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
    This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
    If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
    Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
    Kate Li
    TechNet Community Support

  • Problems with Windows 7 home premium and ovi

    Excuse me for my english.
    I've a big problem with Windows 7 and NOKIA N97 32G
    I install the latest version of Nokia Ovi Suite 2.0.2.42. When I connect the phone with USB and select PC suite mode in the phone, OVI don't see the phone and say method not compatible.
    I can't synchronize the phone.
    Help me.
    Thanks

    I just want to say that many Nokia Ovi Suite problems have showed up for me recently. I tried everything (including many reinstalls, cleans, etc.) and nothing helped.
    Finally I found the solution:
    I realized that I have installed Service Pack 1 on Windows 7 (32-bit), and this stopped Ovi Suite from working correctly. The solution is to run Ovi Suite in compatibility mode as "Windows 7"
    (You may be surprised to run an application in "Windows 7" compatibility mode on Windows 7. But after installing Service Pack, it is no longer "Windows 7" but it is now "Windows 7 SP1"! This is different. So "Windows 7" is the old mode without the service pack, and in this old mode Ovi Suite works.)
    Concluding: After installing Service Pack 1 just use compatibility mode as "Windows 7" to run Ovi Suite, and this program should work OK (at least for me it works on a 32-bit OS).
    PS. My version of Ovi Suite is 3.0.0.290

Maybe you are looking for

  • REP-1813 Object 'R_G_Document_Number1' too large to fit in matrix cell.

    Dear Concerns, I am facing this problem in my Cash Book Report which is Matrix. Reports runs perfectly but on page 16 its shows the REP-1813 error and on one of our supplier it shows this but in query when i do this and pv.VENDOR_NAME !=('M/s S. B. E

  • Is it possible to use Snow Leopard on Mountain Lion iMac with Virtualbox ?

    I've been lucky recently, with people giving the perfect solutions for me so I try again. But, this one is a tough one: How to run a virtual Snow Leopard on a new iMac ? I got a 2013 iMac with Mountain Lion (10.8.5 now) so,  totally incompatible with

  • Putting new parts in a Tangerine ibook?

    I have a question. I have an old Tangerine G3 ibook that I put away when I had bought a Dual USB ibook. The logic board died on the dual USB ibook....so, I stated up the old Tangerine and installed it with OsX. I've already replaced the memory from t

  • Update multiple rows in oracle

    Hi, I have two tables like as follows and I need to update Table A (Name field) base on table B. I need help on this. Current Table A : ID  Line Code Amount Name 111 1    MSCC 500    <null> 111 2    MSCC 300    <null> 111 3    MSCC 300    <null> 111

  • Skinned Flash Video upload

    I'm wanting to upload a Flash video that I've made with a skin and need to know if I can upload the files to a web server without putting the video into Dreamweaver. The files that I currently have are in one folder: SkinOverPlayStopSeekMuteVol.swf M