Startup Problems with CQ5.6, Java 1.7, and OSX 10.8

I'm having a problem with installing CQ5.6 on OSX 10.8 with Java 1.7. Installing with Java 1.6 is ok, and on OSX 10.7 is ok, but the combo of 10.8 and java 1.7 is having problems. I've found two issues, but it hasn't gotten us to a solution:
1) Just out of the box, I get an error connecting to the repository, with the root cause :
Caused by: java.io.IOException: Could not create a listener on any of the following ports: [8088, 8089, 8090, 8091, 8092, 8093], and could not connect to another cluster node
I then found this answer: http://www.eyelock.net/blog/archives/490 - and tried starting up with that JVM startup param.
2) Then, the IOException went away, but was left with the Unknown Host Exception - described here: http://blogs.adobe.com/dmcmahon/2012/09/03/cq5-5-javax-jcr-repositoryexception-unable-to-r egister-data-store-in-cluster/
After modifying the hosts file and restarting, I'm still having problems. Anyone else have problems with this combo?
Thanks in advance.
- David

Hi David,
The envirnoment you are running does it have internet connection? Please try with adding alias[1]. If does not solve let us know exact stack trace.
[1] sudo ifconfig en0 alias 127.0.0.1
Thanks,
Sham

Similar Messages

Startup problems with XA connection pools on Oracle and WLS 6.1

I am having starup problems trying to set up a WLS 6.1 connection pool using
XA. When I try to start the server, I get the following exception:
<Nov 19, 2001 3:06:28 PM EST> <Error> <JDBC> <Cannot startup connection pool
"dbdev1XAPool" weblogic.common.ResourceException: java.sql.SQLException:
open failed for XAResource 'dbdev1' with error XAER_RMERR : A resource
manager error has occured in the transaction branch. Check Oracle XA trace
file(s) (if any) for database errors. The Oracle XA trace file(s) are
located at the directory where yo
u start the Weblogic Server, and have names like
xa_<pool_name><MMDDYYYY>.trc.
at weblogic.jdbc.oci.xa.XAConnection.<init>(XAConnection.java:58)
at
weblogic.jdbc.oci.xa.XADataSource.getXAConnection(XADataSource.java:600)
at
weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnec
tionEnvFactory.java:194)
at
weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnec
tionEnvFactory.java:54)
at
weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.j
ava:698)
at
weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282
at
weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:620
at
weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
The contents of the Oracle trace file:
ORACLE XA: Version 8.1.7.0.0. RM name = 'Oracle_XA'.
150627.1312:344.344.330727191:
xaoopen:
xa_info=Oracle_XA+Acc=P/cmauser/admin+SesTm=100+DB=dbdev1+Threads=true+LogDi
r=.+DbgFl=0x15,rmid=330727191,flags=0x0
150627.1312:344.344.330727191:
ORA-12560: TNS:protocol adapter error
150627.1312:344.344.330727191:
xaolgn_help: XAER_RMERR; OCIServerAttach failed. ORA-12560.
150627.1312:344.344.330727191:
xaoopen: return -3
I am running WLS 6.1 and Oracle 8.1.7 on windows (separate machines). The
connection pool settings are:
<JDBCConnectionPool CapacityIncrement="0"
DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="40"
MaxCapacity="40" Name="dbdev1XAPool"
Properties="user=cmauser;password=admin;dataSourceName=dbdev1"
RefreshMinutes="15" ShrinkingEnabled="false" SupportsLocalTransaction="true"
Targets="cmatest" TestTableName="hppcontentsource" />
I have not had any problems connecting to the same database through regular
JDBC connection pools or through the utils.dbping utility.
What am I doing wrong?

This is a dup message. Add "DebugConfigInfo OFF" in httpd.conf.
Jong
[email protected] (Olaf Foellinger) wrote:
>
Hi,
we're trying to setup apache on linux so that it's forwarding all jsp
requests to Bea WLS 6.0 on Solaris. We've installed the mod_wl.so
modules according to the documentation. When apache starts it shows the
following warning:
[Tue Jan 9 13:22:55 2001] [warn] Loaded DSO
/usr/lib/apache/1.3/mod_wl.so uses plain Apache 1.3 +API, this module
might crash under EAPI! (please recompile it with -DEAPI)
and in fact, when we try to load a jsp page we get
[Tue Jan 9 13:29:14 2001] [notice] child pid 5780 exit signal
Segmentation fault (11)
Does anyone have a working solution ? Can bea provide us with a plugin
compiled with EAPI ?
Greetings Olaf

Office 2013 Startup Problem with NEW Win 8.1 Install and no prior Office Version

Although I have seen similar threads on the forum, they all seem to address a different scenario.
My environment is as follows:
Intel MotherBoard with I07 max processor
64GB RAM
512 GB SSD Boot drive on which Windows 8.1 was installed as first and only O/S. It was validated
4TB HDD on which User directory and programs installed (those which permit drive selection in startup)
4TB data drive.
Machine was built from scratch with Win 8.1 Pro plus Media Center
Office 2013 Pro Plus was installed and validated
Machine is running in an MS AD Domain whose PDC is running on Win Server 2008 R2
User is a member of Enterpise and Domain Admin group
HERE'S THE PROBLEM,
Any Office 2013 Pro Plus application (Not Just Oulook) goes through the configuration step EACH time it is launched.

Hi,
Try repairing Office in Control Panel -> Programs and Features, check the result.
You can also try this:
Go to the install folder, such as C:\Program Files\Microsoft Office 15\root\office15, find the .exe file for the application, let's take Word for example, WINWORD.EXE, right click on it, send the shortcut to Desktop, right click the
shortcut -> Properties -> Shortcut -> Advanced -> Check "Run as administrator" -> OK -> OK.
Start Word from the shortcut, you may need to go through the process again, reboot the computer, check if it will show up again when you start Word. If the problem doesn't exist any more, do the same to other Office applications.
Regards,
Melon Chen
TechNet Community Support

Problem with Virtual Hosts Individual Config Files and OSX 10.7 Lion (AllowOverride Setting)

I am hoping some other Xserve users running OSX 10.7 (Lion) can offer some additional input or help in a couple of issues I am running into with the Apache settings on my server.
Below is an example site config file on our server. We are hosting a number of sites and are using .htaccess files and apache's rewrite module to create vanity URLs. In order for the .htaccess files to be used AllowOverride has to be set to "All" instead of "None"
The problem I am running into is everytime I stop and restart the web service on the machine it keeps changing this setting back in the individual site configuration files. I will change it to AllowOverride All and next time the server has to be restarted or the web service has to be restarted it is defaulting every site back to None which has become quite frustrating.
Is there somewhere I can set this default setting to prevent this from occuring and forcing every site and site config to default to "AllowOverride All" ?
Should I be researching this somewhere specific? OSX 10.7 changed the entire Apache Interface and the manner in which it runs and I am finding little to no documentation on it.

Are you using the default Server.app, or have you downloaded and installed the (proper) Server Admin tools?
Server Admin.app isn't included as part of the Lion Server distribution, but if you download it and install it you get the same set of admin tools as you're used to with previous versions. From there you should be able to set the 'Allow All Overrides' setting for your site.

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?

What did you "put as slave?" What Mac model do you have, exactly?

Startup problem with Lion OS 10.7.3

Just recently, I've been experiencing a startup problem with Lion. I don't usually have any issues running my Mac, so I'm at a loss why this is happening now.
I have an Intel Mac Pro running 10.7.3. I usually leaving my Mac running all the time and only restart when the need arises. In addition to being my main computer, this mac alsocontrols a MacMini that serves as a music server thru screen sharing.
This past weekend, I restarted my Mac and could not get past the grey screen. The mac chimes, the apple logo appears with the spinning gear, the blue screen briefly appears, but instead of progressing to the desktop it reverts to the grey screen with a repeating cycle of the spinning gear appearing (spins for a while, stops, disappears, reppears spinning, stops, disappears, over and over) - never progressing beyond that stage.
I decided to reinstall the system and things have been fine for the past few days. Today, restarting again resulting in the same problem.
I've tried several things without success. I disconnected all peripherals, reset the PRAM/SMC, ran Disk Utility from a install volume and ran repair and permissions (no problems reported). Tried safe mode startup - a progress bar appeared but never fully progressed and could not get to the desktop.
Recent changes included updating the OS to 10.7.3 and Adobe Photoshop CS5.5 - no recent hardware changes. No bluetooth devices connected.
Any thoughts? Thanks -

Thanks -
I've reinstalled the OS today and am back up and running.
But, since this is twice this has happened within the past week, I'm worried about might be causing this issue - besides bad luck. My Mac is usually rock solid - can't remember the last time I've had to reinstall the OS in the past few generations of OS X.

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I have a problem with simulation in Matlab 6.5 and LabVIEW for PID controllers

I have a problem with simulation in Matlab 6.5 and LabVIEW. I have some methods for granting PID controllers in MATLAB to go but not LabVIEW. International Teams degree to transfer two but when I go past the fourth degree no longer work. We changed the formula for calculating the parameters for grade four and gave me some good values for Matlab award but when I put on LabVIEW have not settled. formulas are available in PDF and are. Please help me and me someone if possible. Thanks
lim.4 generation parameters in MATLAB program and comparison methods are for second-degree transfer function.
Solved!
Go to Solution.
Attachments:
Pt net.zip ‏2183 KB

This is the VIs what i try to make,but is not work. This pdf. document was used to create last VIs PID. thenk you for your colaboration.
Attachments:
PID create by me.vi ‏312 KB
tut_3782.pdf ‏75 KB

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

Startup Problems with CQ5.6, Java 1.7, and OSX 10.8

Similar Messages

Maybe you are looking for