Startup program didnt run

Hello. I just received my iPod Classic 80g in the mail today. I connected it to the computer and nothing popped up. I cannot get it to start up.. The iPod is on and it says Connected. And I can see it in my 'My Computer'.. But when I open the folder there isnt anything that I can open using the programs on my computer.
I dont know what to do! I thought a set up was supposed to start when plugged in.

Here is something I found regarding invalid win 32 programs:
Error Message: "Invalid Win32 program"
Issue: User gets the error message: "invalid Win32 program" when trying to install.
Analysis: What has happened is that you've tried to download a file, but it hasn't downloaded completely. Sometimes downloaded files seem to have finished downloading, when in fact they've ended prematurely -- meaning that the file is not complete. Because of this, the file is not able to run as it should.
Resolution: Try to download the file again! You may have the most luck early in the morning (GMT time) when our servers and the internet are slower. Alternatively, try using a dowload helper such as DAP or GetRight.

Similar Messages

Several programs are running at Startup

Hi Everyone, I truly need your assistance as I am a novice to the internal workings (system Admin) of the computer (Windows 7). My computer is performing terribly and when I check the "troubleshoot" system it tells me that "SEVERAL PROGRAMS
ARE RUNNING AT STARTUP". I know this a simple "fix" if you know what you are doing but I don't. Please help me....someone.
How do you know which programs are the ones needed at STARTUP?.
Newcomer Bev

It the Resume feature.
When choosing Restart, Sleep or Shutdown there is a checkbox you can uncheck to prevent the apps from launching.
Also in System Preferences > General there is a hard-to-find checkbox under "Number of recent items" you can turn off.
Also, you can hold the shift key to disable resume on a one time basis.
If you want to turn it off on a per app basis, (TextEdit is by example, replace TextEdit with the name of the app)
Launch Terminal and copy/paste this at the prompt...
defaults write com.apple.TextEdit NSQuitAlwaysKeepsWindows -bool false
Press return.
You can also accomplish this through the GUI by going to ~/Library/Saved Application State/TextEdit and delete that file…
(note that the User Library is hidden - one way to get there is to go to your Finder "Go" menu hold the option key to choose "Library")
To turn off Resume globally...
chflags uchg ~/Library/"Saved Application State"
Press return
The reverse of the first one is to replace false with true.
The reverse of the second one is
chflags nouchg ~/Library/"Saved Application State"
Again, you can accomplish this through Finder by going to ~/Library/Saved Application State and deleting the folder.

Somehow, all of my exe files are tagged as Acrobat files - I cannot run any of the software on my computer - when I start the computer none of the startup programs run because they all try to open in acrobat.

Somehow, all of my exe files are tagged as Acrobat files - I cannot run any of the software on my computer - when I start the computer none of the startup programs run because they all try to open in acrobat.

See if anything in here helps: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

Is there a way to manage startup programs to help find conflicts?

I recently installed a program called Print It! and have found that it locks up when I try to open its help window. This problem doesn't occur if I do a safe boot, so I'm assuming there is some conflict with programs that are automatically loaded at startup. I'm trying to isolate the problem so I'm trying to find a way to easily enable/disable the startup programs. Is there some software program that will help me do this? I don't really want to remove and reinstall startup programs using the controls in System Preferences. Thanks.

So just what did you have in mind?
I'm trying to find a way to easily enable/disable the startup programs.
I don't really want to remove and reinstall startup programs using the controls in System Preferences.
That includes enable/disable login items?
Some programs aren't in login items but do get added to launchd, some programs like TechTool Pro have their own method and run in the background.
There is no central place to look at a list of all the startup items; or all the launch services and background tasks (shame, too).
Use to be there was a Startupitems in System/Library but no more, or not used as much. Things can be in folder locations, or from where they are installed. What you want is like the old "Extension Manager" which doesn't exist.
You might look and see features and tools in SL Cache Cleaner
http://www.northernsoftworks.com/snowleopardcachecleaner.html

[Solved] startup programs problem.

Hi!
I cannot add things to my session, startup programs. could this be because I am not root? My user is added to all the others like audio, video and network. Cant remember if my user is added to more. How can I access the session (startup programs) in system-preferences-session, as a root? I cant add fusion-icon to my start list, and I can only start fusion-icon by root terminal. Anyone know how to add fusion-icon as a startup program?
Thnx^^
Last edited by AndSmi (2007-12-30 18:44:06)

If you mean what Desktop Environment, then I'm using gnome lastes release. With can't add I mean that everything I put in, dissapears after I've gone out of the session program. Abselutely nothing happens when I try to run fusion-icon in Alt+F2. Not even an error comes up, just nothing. Just as if I never typed anything.
When I run fusion-icon in terminal thats not root, I get this:
[andy@andylaptop ~]$ fusion-icon
* Detected Session: gnome
* Searching for installed applications...
Traceback (most recent call last):
File "/usr/bin/fusion-icon", line 57, in <module>
from FusionIcon.interface import choose_interface
File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 23, in <module>
import start
File "/usr/lib/python2.5/site-packages/FusionIcon/start.py", line 36, in <module>
config.check()
File "/usr/lib/python2.5/site-packages/FusionIcon/util.py", line 362, in check
os.makedirs(self.config_folder)
File "/usr/lib/python2.5/os.py", line 172, in makedirs
mkdir(name, mode)
OSError: [Errno 13] Permission denied: '/home/andy/.config/compiz'
Last edited by AndSmi (2007-12-30 13:56:33)

Alunotify.exe in Startup Programs

I have Norton Antivirus 2009. After EVERY reboot, a little "pulsating antenna" appears in my task tray. It's from the file Alunotify.exe in my Startup Programs. How can I get rid of this so I can run Live Update manually? This antenna goes away after I click it and it autoruns Live Update, but more than 9 times out of 10, there are NO updates and it's a false advisory. I appreciate the help. Thanks!

Suri....
Try disabling the Lion "resume" feature...
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
Restart your Mac.

I5/OS PASE startup program

Hi All,
When we start run Uaserver it is showing this error.
Unable to run i5/OS PASE startup program /usr/lib/start64.
Unable to create Java Virtual Machine.
Java program completed with exit code 1
The env variable is set for these
QIBM_JAVA_PASE_STARTUP      '/usr/lib/start64'
JAVA_HOME                   '/QIBM/ProdData/Java400/jdk14'
Any problem for the ccsid for pase.
Regards
Kohar

Hello,
we had this at one point. It indicates that you have 'inconsistencies' in the kernel. You should probably at least get the DW patch for the same level. If there is a complete kernel out right now, I would go with that.
Please check the Forumalso, there have been several threads regarding the kernel in the last couple of weeks.
Regards,
Ingrid

Adding startup programs

Hello,
I downloaded some programs that need to be started up when my computer startup. These aren't typical mac .app applications but programs that run from the shell as a background process in such. In linux I would put a LSB script and put it in my /etc/init.d/ directory and use chkconfig to add it when the computer starts up however mac does not have that directory or that program.
So how do I add executables to be started up when my computer does?
Thanks!

I found this example:
Compose an AppleScript with the following code:
do shell script "sudo pmset halfdim 0" with no tell block.
Save it as an application, no startup screen, somewhere on your hard drive.
Then, under System Preferences --> Accounts, assign this new application as a Login Item. You may have to tweak the script for username/password compliance, but that code is pretty close to what you will need.
Compiling AppleScript scripts from Terminal command line
You can compile an AppleScript script from Terminal or a shell script by using the osacompile command.
Example:
osacompile scriptname
For more information on using osascript, see the man pages in Terminal, by typing: man osascript

[Solved] Unable to boot (startup job is running)

Hi there!
Today I went home and tried to boot my laptop there, but was unable to boot Arch.
Before I went home I did a system update using ' sudo pacman -Syu ' and shut the laptop off normally. Right now I get the following message whilst booting:
" A startup job is running for dev-disk...25EFDCE0.device"
It fails after 1 min. 30s and shows a time out error for dependency /mnt/6776F38425EFDCE0, and refuses to boot. I waited for 5 min. but the only thing working at that stage is the shut down button (which appears to enter a normal shutdown mode).
Grub 2 is functioning; Windows 8 boots up fine (same HDD); though all options to boot arch fail because of the 'startup job error message'.
Do any of you know how I can fix this, or how to boot/fix arch such that I can attempt to fix it? Based on a search trough this forum it might be an error in FSTAB, although all cases reported on this forum appear to boot normally after the 'a startup job is running 'error message'.
Many thanks.
Last edited by Simthadim (2014-10-11 09:43:36)

Thank you for your response.
Changing the UUID's to /dev/sdaX did not do it's magic, unfortunately. The ' a start job' message is gone, the boot however gets stuck at
/dev/sda2 clean .... (beginning of boot)
Unfortunately I did not properly save the back-up of my fstab file, so the initial set up is lost. Was able to acces arch using alt+f2 and have restored it manually with
lsblk -f
It currently looks like this. I did have a line to automount my data partition (/dev/sda4, label: Data), but didn' t know how to restore that one as that line got deleted too. My gut says this automount was causing the initial error, but it should boot up normally with the current fstab file, right?
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda2
UUID=47faa9c6-13d9-4d4f-8744-78766ea7c193 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda3
UUID=bd14a274-a365-4511-9a11-151e086a42db none swap defaults 0 0
UUID=509F9EA61178387E /run/media/simon/Data ntfs auto 0 2

Need program for running accruals mid-month

Hi,
We have accruals set up at period-end (and not Receipt) at Purchasing options.
For testing this, I cannot close period or change period date.
I know there is program that runs Accruals for all unpaid purchase orders (possibly in payables)
I searched, but could not find this program name.
Please help!!!
Regards,
Gayatri
Edited by: gayatri chodankar on Sep 2, 2010 4:30 AM

Hi,
We have accruals set up at period-end (and not Receipt) at Purchasing options.
For testing this, I cannot close period or change period date.
I know there is program that runs Accruals for all unpaid purchase orders (possibly in payables)
I searched, but could not find this program name.
Please help!!!
Regards,
Gayatri
Edited by: gayatri chodankar on Sep 2, 2010 4:30 AM

Getting the variant name when the report program is run in background

Hi All,
How to get the variant name for the report program when run in background? My requirement is to create an email attachement with the name 'variant.XLS', where variant = selection screen variant, when the report program is run in background. The system field SY-SLSET holds the variant name only when run online.
Any pointers to this will be highly appreciated.
Thanks and regards,
Nilesh.

Hello Nilesh,
Please find the algo:
1. Call the FM: GET_JOB_RUNTIME_INFO to get the background job details.
2. Select data from TBTCP using these details:
DATA:
FP_EVENTID   TYPE BTCEVENTID
FP_EVTPARM   TYPE BTCEVTPARM
FP_ACTIVE    TYPE BTCXPGFLAG
FP_JOBCNT    TYPE BTCJOBCNT
FP_JOBNM     TYPE BTCJOB
FP_STEPCNT   TYPE BTCSTEPCNT.
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
    IMPORTING
      EVENTID                 = FP_EVENTID
      EVENTPARM               = FP_EVTPARM
      EXTERNAL_PROGRAM_ACTIVE = FP_ACTIVE
      JOBCOUNT                = FP_JOBCNT
      JOBNAME                 = FP_JOBNM
      STEPCOUNT               = FP_STEPCNT
    EXCEPTIONS
      NO_RUNTIME_INFO         = 1
      OTHERS                  = 2.
IF SY-SUBRC <> 0.
*   Error calling FM: GET_JOB_RUNTIME_INFO
ENDIF.
DATA: FP_VARIANT TYPE BTCVARIANT.
SELECT JOBNAME JOBCOUNT STEPCOUNT VARIANT
FROM   TBTCP
INTO TABLE L_IT_TBTCP
WHERE JOBNAME   = FP_JOBNM
AND    JOBCOUNT = FP_JOBCNT
AND    STEPCOUNT = FP_STEPCNT.
IF SY-SUBRC = 0.
    SORT L_IT_TBTCP BY JOBNM JOBCNT STEPCNT.
    READ TABLE L_IT_TBTCP INTO L_WA_TBTCP INDEX 1.
    IF SY-SUBRC = 0.
      FP_VARIANT = L_WA_TBTCP-VARIANT.
    ENDIF.
ENDIF.
Hope this helps.
BR,
Suhas

How to create a variant to a report from another program at run time

Hi experts,
when i am using FM : /OSP/REPORT_CREATE_VARIANT to create a report variant from a program then i am getting an error 'For object /OSP/ERPNR , number range interval 01 does not exist ', how should i avoid it or can any one help me out to create a report variant from another program at run time with the results of the program.so that i can execute the report from here with this variant

If i understand you,
- You can use a FM like [RS_CREATE_VARIANT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=rs_create_variant+&adv=false&sortby=cm_rnd_rankvalue] to create a variant and then use it in the [SUBMIT|http://help.sap.com/erp2005_ehp_03/helpdata/EN/fa/096d67543b11d1898e0000e8322d00/frameset.htm] statement USING SELECTION-SET.
- But you may also use SUBMIT with WITH parameters which doesnt require variant creation and with much less programming efforts.
- You can mix the two solutions also.
So what is you actual requirement, also look at some documentation like [ Scheduling a Job: Full-Control Method|http://help.sap.com/erp2005_ehp_03/helpdata/EN/fa/096ce5543b11d1898e0000e8322d00/frameset.htm]
Regards

Can a java program be run in the background?

Hi all,
Can a java program be run in the background without the user being aware of it? I need to make a program that continuosly monitors a pc at regular intervals and runs at all time. It should be hidden(shouldn't display on the screen while running) from the user, and also, can it be run as a system file so that even if a user checks he/she would think of it as a system file?

I'm the administrator of all the computers. Then as I said there are commercial applications that do that.
Presumably you expect a problem now. And implementing an acceptable solution is going to take you months. Because not only need to 'hide' the application, you also need to set up all the monitoring and logging capability. And the first will require quite a bit of JNI work along with testing (in particular as it could interfer with existing applications on the users computers.)
I need to
install the software in all the machines and i want
that the users who use the machine should not be able
to close the program through the task manager. If the users have admin rights then they can terminate a windows service.
And if they don't have admin rights then you can simply turn off the ability to install anything.
I want
to know what the resources of the computers are and
that if anyone has added a resource to it or
not(attaching a flash usb thumbdrive etc). Lots of JNI.

I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run, but it won't open. Is my configutation too slow?

I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run on OS 10.6.8. with 2 GB RAM, 4 GB better, but it won't open. Is my configutation too slow?

Looks as if you're just at the minimum specs - http://www.apple.com/logicpro/specs/. Says 2GB minimum, 4GB recommended. And 2GB of RAM is all the RAM the 1,1 can handle. If I were you I would call Apple's App Store service center - you have the minimum requirements, as I read it, but perhaps you need a faster processor?
I had a 1,1 but sold it when I bought my late 2011 in March of this year - maybe it's time to look at a new machine?
Clinton

I need to configure a new hard disk as backup disk for time machine. The set up program is running and it says it will take 9 days to backup about 56 GB. Is it normal ?

I need to configure a new hard disk as backup disk for time machine.
The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
Is it normal ?

Roberto 17 wrote:
I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
The new HD is a WD My Passport Edge 500 GB capacity
5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup."

Startup program didnt run

Similar Messages

Maybe you are looking for