Startup Screen ( Zen Touc

Hello all... i just bought a zen touch and started to get familiar with the Creative MediaSource Organizer, when you clic settings it pops up the settting windows and somewhere in the middle says Startup Screen "Change Jukebox's startup screen" and right next to it the button "change", well of course i try it and nothing happened otherwise i would't post my questions is is that picture for change de zen touch's startup screen? or the option is available only for other products? if it works with zen touch why cant i change it's .. if anyone could tell my id appreciate it. thanks.

Yes, this fuction does work with the Zen Touch. The problem here seems to be the way the new "image" is stored on the player. I'd suggest that you restart the player after disconnecting it from the USB port and restarting the player. Then you shoud see the new image apear at start-up. I don't know about reverseing this procedure, you may have to re-load the Firmware to restore the original start-up screen.

Similar Messages

Startup Screen on Zen Mi

if you go to the creative explorer, and click on the settings, button, then the settings tab, there is an option to change the start-up screen, but the "change" button is always unavailable. is it possible to change the splash screen on the zen micro? or is creative just teasing

eriknba,
No, you can't change the startup screen of the zen micro player. MediaSource is used for most of our range of MP3 player and not just zen micro so that feature is there to cater to player that support that feature such as the Zen Xtra, Zen NX, etc.
Jason

Zen micro Freezes at startup screen.... not go

well here is the story, i got my zen micro in feburary, and it worked good for about 3 weeks then i got that headphone jack problem, RMA'd it and got a new one
This new ZM wroks awesome, or it did until about 3 days ago, i tryed starting it up and it froze at the startup screen. i did the recovery mode numerous times tryed to upgrade the firmware and did everything, but nothing worked. Now im a bit angry because since the 60 day period is over i acually need to wait for creative to repair my ZM, and i just dont have time for that!!! on the 29th im leaving to new york, and then the 3rd im leaving for london and wont be back until 8th! but what will be my source of music then?!? this really angers me as i was looking very forward to listening to my mp3 player on the plane rides, at this point i ran outta options. Any help from any of the staff members or members in general as to how to solve this problem or even fix my ZM without ending it back

robtbomb: As per the FAQ, if rescue mode isn't working properly then the player is faulty. All you can do is contact support, perhaps by telephone to expedite matters, and see if they can return the player as a priority.

Zen Micro Startup Screen Chan

I am curious abou this option but I can't access it. Is there a certain firmware I need to have or do I need pictures on there to change it's

I don't think you can change the Zen Micro startup screen (yet?)

Zen touch startup screen cha

I have a Creative Zen Touch and recognised that in Nomad Explorer, I could go into 'Settings' and there was a part where it says to change the Startup Screen image. I clicked on it and chose a picture that was the required size (60x04) and it doesn't come up when I turn my Zen on. Any help? Thanks...

thats right it's not supported on the touch

Theres something wrong with my mac! Help! It said that it had a virus and then the browser wouldn't open! I tried to restart my computer but it wouldn't work, so I held down the power buttron. The startup screen is there but nothing else happens'!

So yesterday I went to do some work on my laptop.
My laptop is from about 2005-2006 so it's pretty knackered. Everything was going just fine but then my Avast! Security software notified me saying "VIRUS DETECTED" so I tried to go on the avast application but it wouldn't open. I tried to open my browser but the icon just bounced and stopped and them nothing happened after! So i clicked on the apple sign and clicked shut down. Then the system wouldn't shut down. So i held down the power button causing it to shut itself off. The next day I opened the laptop and turned it on. It made the healthy turning on noise and I can hear the fan working perfectly fine. The startup screen is showing. This is an all grey screen with the Apple logo in the middle and a spinning circle in the middle, the circle has been spinning for over 10 minutes now and I do not know what to do. I use this laptop for literally everything and I cannot possibly afford to replace this . I am hearbroken as I know that there is a possibility that I will no longer be able to use this laptop.
I would be extremely grateful if someone helped me as I am truly devastated. :(
HELP PLEASE

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)
Avast! Uninstall

How to get rid of the SAP BPC "three globes" startup screen?

Hi,
I am trying to figure out how to get rid of the SAP BPC "three globes" startup screen when we start BPC. I do not want it to pop up.
I looked at VBA behind the workbooks but could not find anything. Could not make the sheet invisible.
Is there a way to get rid of the screen? This is the screenshot
www.flickr.com/photos/chalinka/3471310254/
Thanks!

Just found the answer on this very forum!
Re: How to change the logo, (3 Globes) on the launch page
Posted: Mar 18, 2009 12:46 PM in response to: David Fletcher Reply
OK then, now v7sp03 for microsoft has hit the shelves, you can change the logo !!!
It is quite easy.
Have the logo file ready in either BMP, GIF or JPG format.
Put it in your "Server Install -> DataWebFolders[Appset]" folder (so where you keep your files).
In ApplicationSet parameters, add the parameter COMPANY_LOGO and in the options type the name of the file you just put on the server.
Now if you restart BPC for Excel, the second excel page that pops up should be showing your new logo or graphic (mine did).
The use of the logo has been documented in the admin manual -> working with appset parameters
Some tips.
I wanted not to clutter the filesystem so i put my logo in the appsetpublications folder and added the path accordingly in the parameter (so now it reads appsetpublicationslogoname.jpg instead of just logoname.jpg).
If you do not supply a name (only the parameter), your second Excel window (normally holding the graphic) will not appear. That could be an alternative too if you find that whole thing annoying.
Hope this helps you build great BPC apps,
Edwin van Geel

2011 i5 Mac mini no startup screen, but computer starts fine...

I just got a new Mac mini MC815 i5 2.3 Ghz a few monrhs ago, and I added 8 GB of RAM and a 750GB 7200 HD then did a fresh install of Lion 10.7.4 a few weeks ago. When I use the Mac mini on any normal 24" Acer PC LCD via HDMI to DVI adaptor or Thunderbolt/Display port to VGA adaptor the Mac mini boots normal. I see the Apple logo and and spinning wheel for about 35-40 seconds and then see the desktop like normal.
As long as I use the mini on a PC LCD panel, there is no problem. When I try to connect the mini to a 32" or 42" television via direct HDMI cable... the colors are all screwed up. I see the apple boot logo, but it is green instead of grey. I tried 2 different TVs and 2 different HDMI cables. Both TVs are 1080p capable and work fine with Windows 7 PCs over HDMI or VGA at 1920x1080@60 or lower. The TVs have 2 HDMI inputs and 2 VGA inputs, so I have to use the VGA adapter. (can't use DVI)
I used the Thunderbolt/Display port to VGA adaptor and the colors are fine. All resolutions work, but I nomrally use 1280x720@60 so I can see the icons better from across the living room. Anyhow everything works perfectly with VGA, except there is no startup screen or logo and it takes a long time to boot after the chime. The TVs are blank and say "No Signal". I timed it with my watch on several occasions and it takes between 90 seconds to 2.5 minutes to boot to the desktop, but the TV says no signal while it is waiting. After the desktop finally comes up, all is well.
I tried 1920x1080, 1280x720, 1366x768... still the same problem. Slow boot, no bootup screen or logo but after boot is finished, everything shows on the TV and fits in the frame (no underscan problems) and the color is normal. The computer is fast and responsive. If connect the mini to a normal 24 inch Acer LCD to VGA I see the logo and it boots in 35-40 seconds.
Any ideas here? Do you think the mini is displaying the startup screen at an unsupported resolution and that is why the TV is blank? After the boot sequence, it finds the proper refresh rate or size then finally shows up? Or do I have 2 bad TVs? Or 2 bad Thunderbolt/Display port to VGA adaptors?
When I hook my 2011 2.3 GHz Macbook Pro (same 8GB RAM and 750GB HD upgrade on it too) to the Thunderbold/Display port to VGA, I don't have this problem at all. When I turn on the Macbook Pro, the Macbook screen shows the grey logo and the TV shows a grey screen until it is fully booted. However, the Macbook Pro also cannot use the Thunderbolt/display port to HDMI adapters either, the colors are usually green.
Anyone else have this problem with their 2011 Mac minis? I want to solve this problem before I buy a second mini for the bedroom TV. When I use my Windows 7 PCs via HDMI or VGA, I have never experienced these problems.

pullman wrote:
First -254 which happens right away. From googling a bit I've discovered this may have to do with having chosen the drive as opposed to the volume as source/target.
So selecting these (but being confused as to how the recovery partition could be included in the restore if I choose only the boot volume and not the boot drive) the restore began. However it stopped after a few minutes complaining about an "input/output error". No further information given.
Sorry, my instructions may have been too vague. Yes, when you boot into the Recovery HD on your internal HD and use the Disk Utility Restore you need to specify the Source and Destination as a volume (e.g. Macintosh HD). Don't select the drive. And make sure the SSD is formated correctly.
With Disk Utility's Restore it does a block level copy so it's like creating an "image" in the PC world (e.g. Norton Ghost or Acronis True Image). This means you get ALL visible and hidden partitions copied over and bootable. With CCC you get a bootable clone of your OS/Apps/Data, but you can't boot to a Recovery HD on that clone. There is none. So, when you clone back to an internal drive, CCC has the Disk Center feature to create a Recovery HD on your internal drive. Disk Utility's Restore, however, clones both OS/Apps/Data and the Recovery HD to your internal drive without having to execute a 2nd step.
Which Intel 520 Series SSD did you install? I have an Intel 520 Series 120GB SSD installed in my Mac Mini in the bottom slot (closest to the bottom opening) and my stock 500GB HDD in the upper slot (in the drive bracket).

IPhone 5 will not boot up past startup screen after attempted update to iOS 8. Not recognized by computer.

Like everyone else today, I attempted to make the move to iOS 8, using my Mac's iTunes. All was running smoothly, the progress bar was nearing the end when I received the error that "the iPhone software update server could not be contacted." With a now useless phone, I restarted it, hoping for the best as I could do nothing. I am now stuck with a phone which will turn on to the white startup screen and black Apple Logo, then instantly shut down, leaving me to repeat the process. If I hold down the home button, I can enter what seems to be "Recovery Mode," with a red iTunes Logo, as opposed to the usual blue. From here, all internet sources I have found suggest that I should restore the phone, but that's really where I hit the problem. When I plug the phone in, when in Recovery Mode, I simply receive the "iPhone software update server could not be contacted" error again, leaving the phone not recognized by iTunes. In non-recovery mode, the phone appears to simply turn off so fast that iTunes has no time to find it.
Any one with similar problems or solutions?

This what happened to my iPhone 5 after I updated to iOS 8.0;
The update process was done smootly without problems thru
Over the Air.
Now when I cold start/boot my iPhone 5, my apple logo appears as it was
in iOS 7, but after 30 seconds or so, my Apple Logo dissappears the
screen goes black for 5-6 seconds, but then viola! I am at the Log-On
screen... Then I start using my iPhone.
Just like Chris above, I have done 10 reboots, (complete shut down and
restart), its always the same...
Other than this, my iPhone works just fine. I will not re-install the iOS.
From my past experience, re-installing the iOS does not change
these minor differences...

Itouch stuck on startup screen-please help!

My itouch has been stuck on the startup screen since last night; first I tried letting it charge, and after 30 minutes with no results I unplugged it, let the battery drain completely and started again. After another hour of charging with no results I tried restarting it, again with no results-upon restarting it returned to being stuck on the startup screen. This morning I tried letting it drain again and it became extremely hot until it turned off again. A while ago I plugged it into my computer, hoping to reset and restore it, but it is now, once again, stuck on the startup screen. It's not even being recognized by iTunes or my computer. My ipod is NOT jailbroken btw. Please help!! I don't think I can go on much longer without my music lol

What do you mean by startup screen?
Try here:
iOS: Not responding or does not turn on
An appointment at the Genius Bar of an Apple store is likely in order since the hotness tends to indicate as hardware problem.

Windows 7 boot camp screen goes black after windows startup screen!!!!!!

A few days ago when I tried to start my MacBook Pro in windows 7 (enterprise) I encountered a completly black screen after the startup screen.
1) Choose start in Windows 7 from boot camp menu (holding option after starting up computer)
2) Windows start up screen would appear and finish
3) For a very brief second my cursor pointer would appear and login screen would flash onto the screen, then the screen would go black
BUT
I CAN boot windows 7 in safe mode
The computer is still on when screen goes black (fan still running and i can use keyboard commands to shut down the computer)
I've been searching the Internet for DAYS to no avail
PLEASE someone help me....... ive already tried the sfc /scannow and dskchk commands in the command prompt window

Win 7 Enterprise is not supported by Boot Camp, you may or may not get it to work reliably, (I would not bother to try)
Read this document then pick a supported version of Windows for your Mac.

MacBook Pro frozen on startup screen with progress bar and then it turns off

Hello, I have a MacBook Pro 15" of early 2012 with a i5 Intel, 4GB of RAM and a 500 GB HD.
I was installing the new suit of Adobe, when suddenly my Mac got frozen, vertical coloured lines appeared and the image on screen went distorted. I had to reboot the Mac by holding the power button until the screen turned off and when I turned it on, the lines appeared again and it itself automatically rebooted. Then the screen (now with no vertical lines) got frozen on the startup grey screen with the apple logo and the spinning wheel for hours with no response.
I tried to follow the steps of the official mac forums like verifying the HD with CMD+R and then Disk Utility, it says everything's fine; the same happens with CMD+S, no errors. I reinstalled Mavericks with the same CMD+R. I already reset the PRAM, SMC and performed a Safe Boot staring up in Single user mode and Verbose Mode and nothing, the same startup screen. I made too thins thing of holding shift until the progress bar appeared. Three days later (Today) I repeated the steps again and finally the verbose mode. Now, when I turn it on, the startup screen appears again (Apple Log and spinning wheel) with a progress bar. When it completes, the Mac turn itself off.
if you can help me, please. I don't know what else to do. The last thing is technical service.

Hi again ggt15,
You can find some more information about the Recovery Partition of your hard drive here:
OS X: About OS X Recovery
http://support.apple.com/kb/HT4718
It sounds like you might be trying to reinstall your copy of the operating system. If that's the case, you may also find some helpful information here:
OS X Lion: Reinstall Mac OS X
http://support.apple.com/kb/PH3878
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://expresslane.apple.com/GetproductgroupList.action.
Cheers,
Braden

Boots to windows startup screen, flashes blue screen, restarts and repeats

HP ENVY H8-1414 Product #H3Z00AAR
Windows 7 Ultimate 64-bit
Alright, so here is my issue. I turn on my pc and it gets as far as the windows startup screen, flashes a blue screen error for about half of a second and then restarts it self. My HDD is recognized in the bios. Tried a memory test in diagnostics and it passes. Tried a hard disc check and it passes the SMART check but fails the Long DST with a failure ID of 0GF21L-0006LR-WPVX0K-61C703 (no idea if those a zeros or O's)
I've also tried the startup repair but it did nothing. So I removed the hard drive and tried to use it in a different PC but had the same issue so I figured the hard drive went bad. Then I tried formatting a spare hard drive and installed a fresh copy of windows 7 on it, tried it on a different PC and it works just fine. However, when I try to use that hard drive on the HP ENVY I get the exact same problem even though it worked just fine on a differenct pc.
I purchased this PC refurbished about 3 months ago, the warrenty just ended a week ago. There have been no hardware or software changes on it at all. This thing worked flawlessly last night... I locked the computer before bad and I woke up to this. No power outages over night or anything. It just doesn't make any sense.

Here are the specs for your HP ENVY h8-1414 Desktop Computer. According to the specs, this model came from the factory with Windows 8 installed. The "blue screen" and restart are normal for Windows 7, when it encounters an error, unless you have altered the default settings.
The LONG DST failure is indicative that the hard drive has failed or is about to fail. Unless the hard drive is moved to an identical or very similar computer, Windows will encounter a "blue screen. This is true with the original hard drive moving from the h8 computer to the other computer and the test hard drive from the other other computer moving to the h8 computer.
Try placing the "test" hard drive in the h8 computer and installing Windows 7 from a DVD or USB stick. If you have any problems, please post back with full error messages and screen shots. Also indicate what stage of the install Windows 7 was doing tat the time.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

MacBook Pro Frozen At Apple Startup Screen

I have a MacBook Pro that freezes at the Apple startup screen, here's how the problem occurred and is quite unique among scenario's out there:
The problem occured after I upgraded (bought) to a new MacBook Pro and switched out the hard drive from the old Mac to the new (it was an easy swap)
There where no prior problems with the old Mac.
The hard drive has 2 partitions, one running OS 10.8.5 and the other running OS 10.6.(something - cant' remember)
10.8 started up fine after the switch. 10.6 did not (and still does not)
The drive is a brand new OMC solid state SATA drive.
I've run 'Repair Disk Permission' and 'Repair Disk' in First-Aid in Disk Utility from the 10.8 side on the 10.6. Reports everyhing is OK.
I've searched this forum, as well as throughout the web, trying the many solutions related to "mac frozen at apple screen" - literally almost tried them all to no prevail.
I am considering wiping the disk or starting in Recovering mode and restoring from a time machine back-up but thought I would ask here first..
Details of the new Mac:
MacBook Pro
13-inch, Mid 2012
Version 9,2
Both old and new Macs are completely identical apart from the upgraded components in the new.
Please help, I am completely STUMPED on what to do!

Why do you need to run Snow Leopard? For PowerPC apps? Which ones?
More information here:
http://forums.macrumors.com/showthread.php?t=1365439
Installing Snow Leopard Server into Parallels for DUMMIES!:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

Startup Screen Pixelated - I really need help on this one.

15" Macbook Pro - Spring 2011
My startup screen sometimes would be pixelated with the Apple logo and then would go to grey screen and do nothing... then I would be forced to shut down and power it up again. On two occasions, the bootup would have stripes on it. See photo.
And then the occasional lockup while working on something would happen and I was forced to power it down. This would happen periodically and not every day.
So... I had this problem a couple of months ago (for several months) and the Apple store kept my Macbook Pro for a few days and said there were reported no problems. They were clueless as to why I had the above screen show. They said... maybe it is a bad installation of the OS and that it got corrupted.
So a couple of months later and I am now I am having the same issues again. But this time, I had bought another HD and installed Mountain Lion on it... and I have it connected via USB. I had used it several times before last night when I held the option key down to choose my startup disk to be the new HD via USB. Then I get this pixelated screen again, but this time it was at the startup disk screen. See Photo.
It's like you have a car problem and you take it in to the shop only for it to not malfunction... I really need some guidance on this one. My AppleCare warranty just expired (was valid during my visit to the Apple Store)... And I am not a happy camper... I always use macs... and I teach everyone who has them how to use them.
So to be clear... This is the same internal HD that I had when I took it to the Apple Store. (Lion)
I installed Mountain Lion on a new HD connected via USB and have worked off of it for a few days with no problems, choosing it as a startup disk.
Last night booting with the option key held down I get this pixelated screen, whereas before it was never pixelated holding the option key down.
So I have a couple of questions:
Is the Boot Screen above run by the motherboard or the HD? If it is the MB, then I need to talk with Apple again.
Does anyone have any clue what is happening?I have reset my PRAM and switched out my RAM.
If this screen is run by the same HD in the laptop, then maybe I just need to take it out....?
I would appreciate any genius expertise. I am a little frustrated that I am having this problem and cannot narrow it down. I use my laptop extensively for presentation, graphics, and teaching and now I am afraid of it.

Your 10.7 EFI may be corrupted.
The way a Mac works is EFI is updated via Software Update, it's written to the OS X partiiton, then gets loaded into the hidden EFI partition and read/used upon the second boot.
So it takes two reboots to load EFI and goes into the EPROM boot memory.
My terminolgy might be inaccurate as I didn't take a Apple course for certification, but I understand a little about the boot stage from my Linux on Mac experience.
If your 10.7 EFI is corrupted on one drive, and you've got a 10.8 clean EFI on another, then it takes two reboots from the same drive to clear and use it's EFI into boot memory.
So if you've booted 10.7, then option booted to use 10.8, it could be the corrupted 10.7 EFI still in memory.
The way to fix the corrupted 10.7 EFI partition is a total wipe and format of the entire drive to catch the hidden EFI parition, then install 10.7 fresh and update.
Of course Apple made this difficult with Recovery Partition which won't allow a complete drive erase.
However you can do this
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
There is also a way to install EFI firmware from a cd, however I don't know where it goes, reboot the 10.7 drive twice anyway
https://support.apple.com/kb/HT1237
http://support.apple.com/kb/DL77
Since your out of warrantly, you might want ot just go ahead and repalce the internal drive and see if that fixes the problem.
http://eshop.macsales.com/installvideos/

Startup Screen ( Zen Touc

Similar Messages

Maybe you are looking for