Startup sound

Can anyone tell me if the Arcana startup sound pane works on the new Alum intel-Imac? I have it installed on my G4 and it works great and I would like to put it on my new iMac. I just don't want to create any problems!

The 1.1 Beta works great on my Intel-based Mac. I don't believe that you will have any issues on the newest models.

Similar Messages

How do I disable the startup sound on macbook pro 7,1?

I need to disable the startup sound on the macbook pro 7,1 running 10.6.8. If anyone can give me info I would appreciate it.

Look for Startup Sound on Macupdate.com
You really shouldn't turn it off, as if there is a error you won't be able to hear the beep codes.
However you can lower the volume.

Won't turn on past the startup sound

Hello,
I'm a student studying abroad right now in Senegal, part of Sub-saharan Africa (which might help for later on).
My iBook won't turn on past the startup apple noise (the daaaaauummm). When I press the power button it makes that noise, along with a minimal amount of internal processor noise, and then nothing past that. The internal noise basically stops, and nothing comes up on the monitor. This problem started yesterday--I was using my computer and then the screen started to go fuzzy and get static and then it just went blank. Although I said that I don't get anything past the startup noise, I think my computer is still on (even though it isn't doing anything) because if I want to get the startup noise again I have to force shutdown the computer (hold down the power button for 10 seconds). Furthermore, when I do get the startup noise, the lighted ring around where the power adapter plugs in goes from orange to yellow and stays yellow for a bit. However, no light illuminates around the power button on the computer.
At first I thought maybe there was a problem with my monitor. I followed two of Apple's troubleshooting steps, resetting my parameter RAM (I think holding control command P and R) as well as resetting my computer's PMU (shift control option and power button) and for both of those, I managed to actually get something on my screen--the apple with the gear around it popped up and stayed there, but then after about 3 seconds it got the same staticky and lines and then went black again. When I tried to replicate this by doing the exact same thing (for both solutions) I was not able to get past the startup sound (ie the screen stayed blank) and it was back to square one.
Basically, I'm stumped. There are power cuts here in Senegal, along with subsequent power surges when the power comes back on, which lead my Dad to think that maybe my motherboard got fried. However, there is a power adapter on the cord which should block against that. Furthermore, that won't explain why the laptop was working right before it fritzed out on me, even though it was not plugged in. I'm thinking that maybe there might be a bug in my computer (like a physical one that crawled in). I am thinking this because there are bugs that crawl around my computer and under my keys (it's not as gross as it sounds--well actually I guess it is...) and furthermore I was out of town this past weekend so my computer was sitting idly in my room. Could it be that a bug actually made it deeper into my computer? But also, that still wouldn't explain why I was able to make it work on Monday.
I will be here in Senegal for 3 more weeks, but I would like to use my computer before then. Is there anything I can try to fix myself here, or will I have to wait until I get back to the states. Is there anyway for me to al least get some of the stuff off of my harddrive--that's all I really care about? Obviously, there isn't an apple store here in Dakar, Senegal, for me to take it to--although there are a few computer places but it seems like Apples aren't too popular here, and so I'm not sure how effective/knowledgeable they'd be with a Mac. Plus I'd have to explain all of this in French, which wouldn't necessarily be the easiest thing.
Thank you sooo much,
Chris
And for my operating system, I'm not sure if I clicked the right one, but I know I'm on one of the newer ones (not the newest though)
iBook 12" Mac OS X (10.4.3) bought in 2002
iBook 12" Mac OS X (10.4.3) bought in 2002

Hi, Chris. Welcome to Apple Discussions.
It sounds like you may be having logic board problems. Enough Dual USB G3 iBooks suffered from this problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and if the symptoms look familiar, give Apple a call.
Since it is past the three-year time limit, try calling and ask for Customer Relations (NOT Customer Service--they can't help you) and ask them to please make an exception to the three-year limit in your case.
You may want to consider trying the shim fix suggested by John Sawyer elsewhere here in the Displays Forum:
[Y]ou can often fix this yourself by removing the iBook's bottom housing, and placing a shim of any sort, about 1mm to 1.5mm thick, onto the raised square on the bottom shield. I use a Scotch mounting square--you can get them in hardware stores and many grocery stores. When you reinstall the bottom case, it will press against this shim, which will press against the graphics chip, and may allow the chip to come into better contact with the logic board.
John Sawyer
CJS Macintosh Repair
Instructions for removing the lower case:
http://www.ifixit.com/Guide/50.5.0.html
Once you get it fixed, try never to pick it up by the left front corner alone. Rumor has it that can contribute to logic board failure when the case flexes, causing the graphics chip to come loose from the logic board. If you're picking it up in your left hand (as I often do mine), pick it up in the center under the trackpad.
Good luck. Let us know how things go.

My computer suddenly refuse to start. When I turn it on it gives the startup sound but the screen is grey and after a while a little folder icon with a question mark inside turns up. It doesn't blink. What to do? Nothing happens if I try to start up from

As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
Anybody have any good advice?
I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.

You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry

No startup sound (I constantly need to restart PRAM)

Hello,
I have a MacBook Pro 2012 mid 13" and some time ago I noticed, that startup sound was gone. I googled a little bit and saw that resetting PRAM should solve the problem. It did. But after a few days startup sound was gone again. So I reseted PRAM once again, and it fixed the problem. Now the sound is gone again and I'm tired of reseting PRAM, I'm pretty sure that's not how it should be. Does anyone have any idea what's the problem here? Maybe that's a sign that I need to change my RAM? :s

Stupid me, the sound was muted, so there was no startup sound everytime. I just restarted my macbook with volume up and now it works perfectly. Problem solved.

BT 3.1 - No more windows 7 startup sound

Hey there Apple forums!
I decided to install Windows 7 on my Mac a while ago. I had Bootcamp 3.0 and all the problems related to audio that BT 3.0 had, including the red optical light. Once BT 3.1 was released, I decided to install it. Notice how I hadn't changed any driver from Bt 3.0 until I installed 3.1.
Once I installed the update, most audio problems were immediately solved. No more ghostly red optical light, no more laggy audio, etc. Audio output was still low, but nothing "Enchance audio output" couldn't solve. I was seemingly happy, until i realized that the windows 7 startup sound played no more.
By startup sound I mean the chime that plays when you're in the login screen. This is a very small glitch, as it used to work in Bt 3.0, even with the audio issues it had.
Is there any solution? And before you begin asking protocol questions, yes, the startup sound IS enabled, yes I have the default Windows sounds set, I haven't changed the theme (don't know if that even matters, it shouldn't matter).
If it helps, when i connect two low speakers to the audio output jack and start Windows, and raise the volume, I CAN hear the startup chime in the login screen. But there's not even a faint sound when the external speakers are gone.
Should anyone know a solution, please help me with a post. And the speakers I have suck, so they're not an option.

Hi
Had same problem, tried everything like reinstalling drivers but still the problem continued. However today i tried changing the driver for the sound card to the generic driver and rebooted my macbook pro. on startup the sound card would not work on the generic driver and the system kicked in with an automatic troubleshoot and installed the correct drivers.
Somehow this has enabled the startup sound to work and the system doesn't startup in a muted state.
Haven't a clue why or how this has worked or how long it will continue to work but give it a go.

How do I mute the startup sound

How do I mute the startup sound on my imac

The start up sound is there for specific reasons, for example if you do a Safe Boot or PRAM reset you need the start up sound to do those key functions. I would recommend against masking it and follow Apple's suggestions. Please read your owners manual, where Apple states:
Putting Your iMac to Sleep
If you‘ll be away from your iMac for less than a few days, put it to sleep. When your iMac is in sleep, its screen is dark. You can quickly wake your iMac and bypass the startup process.
This means don't turn it off, my iMac is about 5 years old now. The only time it's restarted is when I'm doing updates, it has reliably that way and has never given me any problems. In short, let it sleep when it's not being used.

How do I change the startup sound level on my desktop??

How do I change the startup sound level on my desktop?

use StartNinja ! worked for me.
it works under Mountain Lion and is even retina-ready:
http://www.allvu.com/index.php/sndownloadpage.html

How do i turn off the startup sound on macbook pro?

how do i turn off the startup sound on macbook pro?

You don't. You may find some third-party software that will, however. Try Auto Mute.
Alternatively, you can try this:
I think this is the best and simplest solution. Open a Terminal window and type (or copy/paste) the following to turn down the startup noise:
sudo nvram SystemAudioVolume="%00"
Press RETURN.
And to restore it to the original value type:
sudo nvram -d SystemAudioVolume
Press RETURN.
That's all folks.

How do I enable the startup sound on Mac OS 10.2.8(Jaguar)

Three things
1.How do I enable the startup sound on Mac OS 10.2.8(Jaguar)
I am using an iMac G4
I like the startup chime of mac osx but it doesn't seem to be chiming when I turn the computer on.
2. How do I get safari+flash player on 10.2.8
3. How do I update the computer (e.g. Windows update kind off thing)
Please help.
Cheers,
Mittens131

1. Make sure the volume is on. Check that the machine makes other sounds.
2. Here is a link for Safari for a Mac 10.2.8
http://support.apple.com/kb/HT2964
Though I'd be surprised if it would be very useful. Things have changed a lot on the internet since that came out. An old version of Firefox might be better. I don't know where you would get an old version of flash. It is an Adobe product.
3. There are no further updates to Jaguar 10.2 than you already have, 10.2.8 that was the last update.

How can i disable the startup sound on the Droid Turbo?

How can I disable the startup sound on the Droid Turbo?

I was going to suggest doing the Following from the Link I added below to see if Silence Mode would silence the power up but on my Droid Maxx it does not the start up Droid is still present so I'm not really sure there is an option to silence it.
The First Link is for the ( Ultra Droid Maxx and Mini) the Second Link is for the Droid Turbo. the instructions for the two style of phones are the same.. as far as I could tell
Adjusting audio alerts
Adjusting audio alerts

How do I disable the startup sound?

How do I disable the startup sound? The sound that plays straight after you push the power button.

See this thread:
http://discussions.apple.com/thread.jspa?messageID=2505976&#2505976

How do I turn off startup sound?

Every computer I ever had, the first thing I do is to turn off the startup sound because it is very annoying in a public place and sometimes in a quiet place. I have not been able to find out how to trun it off on my Air. I asked the guys at the stores and they just say you can't. That is really dumb. I turned off my speaker but that is not a practical way because I may not remember to turn it off when I shut down.
The question is how do I turn it off permenantly.
Love to know.
Thanks.
Glenn

NONE OF THE ABOVE WORKS FOR ME!
imac/Mac OS X Lion 10.7.5
I find this great solution...
<This is a Direct Download Link>
MuteCon for Mac OS
or go to http://homepage1.nifty.com/macbs/download.htm#MuteCon
mutec202.dmg(90.3KB)(recent version)
is a japanese site but the app is in english.
this app mute the sound before exit and demute after boot.
works with Lion/snow leopard/ Mointain Lion
set the preferences like this
and add to Admin User acount to launch on startup.
So easy...I can not believe I lost so much time.
Help to spread the word!!!
<Edited By Host>

24" iMac Startup Sound

I recently upgraded my PPC G4 to a brand new 24" iMac.
On my G4, the mac startup sound would play over the external speakers, and when booting the computer late at night, I could turn down the volume to avoid waking my roommates.
The new iMac 24" seems to blast the startup sound, even if I mute the volume before shutting down.
Does anyone else have external speakers hooked up to their new 24"? Does the boot sound come from the external or internal speakers?

One of the oddities of the iMac line is that the startup sound comes from the internal speakers. If you have external speakers plugged in and unpowered, it makes no difference, you still get a "BLING" when you start up. And since the 24" machine has extra big speakers and bigger audio amp, you get an extra big BLING! Nice, eh?
You might try the freeware utility called "Psst" <http://www.versiontracker.com/dyn/moreinfo/macosx/25458>. I haven't tried it, but it does seem to be able to silence the startup sound on most Macs.
Griff

How to mute/delete startup sound in Mountain Lion?

Is there a way to shut off/mute the startup sound in Mountain Lion without simply turning down all sounds? For years I have used a third party pref pane called startup sound, but it has not been updated for OS 10.8. Thanks.

1. Login as administrator and open Terminal
2. Create scriptfile for muting
sudo nano /path/to/mute-on.sh
3. Enter this as content, when done press Ctrl+O to save and Ctrl+X to exit:
#!/bin/bash
osascript -e 'set volume with output muted'
4. Create scriptfile for unmuting
sudo nano /path/to/mute-off.sh
5. Enter this as content, when done press Ctrl+O to save and Ctrl+X to exit:
#!/bin/bash
osascript -e 'set volume without output muted'
6. Make both files executable:
sudo chmod u+x /path/to/mute-on.sh
sudo chmod u+x /path/to/mute-off.sh
7. Check if any hooks already exist (these will be overwritten, so make sure it is OK for you)
sudo defaults read com.apple.loginwindow LoginHook
sudo defaults read com.apple.loginwindow LogoutHook
8. Add hooks for muting
sudo defaults write com.apple.loginwindow LogoutHook /path/to/mute-on.sh
sudo defaults write com.apple.loginwindow LoginHook /path/to/mute-off.sh

[SOLVED][GNOME] What is the line for the startup sound?

Hi!
I removed the startup sound from GNOME.
I don't even remember if it did work, but I press the remove button a bit too quickly and there is no confirmation box.
Could you launch gnome-session-properties and tell me the command line for the GNOME startup sound please?
Thanks!
Last edited by Creak (2014-01-17 18:40:13)

Spider.007 wrote:You're welcome! You should also mark this thread [SOLVED]
Done!

Startup sound

Similar Messages

Maybe you are looking for