Startup Takes Longer Than Usual
Lately, my MacBook Pro is taking longer to startup than usual. The initial grey apple logo screen is taking a good 10-15 seconds when it used not to. Does anyone know if this has anything to do with recent software/firmware updates???
The links to instructions:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
Resetting MacBook and MacBook Pro System Management Controller (SMC)
http://docs.info.apple.com/article.html?artnum=303319
Resetting your Mac's PRAM and NVRAM
http://docs.info.apple.com/article.html?artnum=2238
Similar Messages
-
Infopackage takes longer than usual
Hi
I've got an Infopackage that normally loads at 7 mins long.
But intermittently (e.g. once a week), the loading will take more than
1 hour.
May I know what is the possible cause for such problems?
Rgds
Rusyinni1. Limit the amount of created data packages for each load between 1000 -1500 as described in below mentioned SAP OSS note:
892513 - Consulting: Performance: Loading data, no of pkg, req size
Note: 1000-1500 = sum of data packages over all data targets, i.e. with three targets 350-500 packages
How to limit the amount of data packages for the delta load:
Go to transaction RSA1 select your dedicated infopackage -- menue-- DataS. Default Data transfer --enter the max. nummber of data packages to be created for each delta load.
2. Global level :Use Transaction RSCUSTV6 for changing configuration setting for all the infopackages globally :
(i).Frequency with which status Idocs are sent : It means how many data-IDocs are described by one Info-IDoc.In simple terms after how many data idocs 1 info idocs to be sent .The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.You should choose a frequency between 5 and 10 but not greater than 20.
(ii)Datapacket size (Number of Data Records per Package) The basic setting should be between 5000 and 20000 depending on how many data records you want to load
.Recommendation :You should not divide up the quantity of data into too large a number of packets since this reduces performance when uploading. The number of data packets should not be more than 100 per loading process.
(III) ROIDOCPRMS : In order to make the RSCUSTV6 settings work you also need to do the related setting in ROIDOCPRMS in source system .
3. Increase the parallelization of the infopackage if possible
Got to transaction SBIW increase the amount of wp which can be used.
Please read also OSS note:
595251 - Performance of data mart: Deactivating tRFC sending in BW
4.. Our Infopackage consists of 3 type of message types RSINFO , RSREQ , RSSEND etc. There is a standard program RSEOUT00 in the source system that is used to pushed IDOCS to OS layer .Therefore create variants for the above message type for this program in the source system .Also create some Background job for this to be run after every 30 minutes .You should not increase the frequency more than this .
Hope this helps . -
Shut down and booting-up takes longer than usual on iMac 27".
Hi there,
I have a problem with my 27" iMac (model listed somewhere), it appears to take an extraordinarily long time to boot up and shut down compared to a few weeks (or even days) ago.
At the moment, at shut-down, it hangs on the blue screen with a spinning wheel for quite a long time, which never used to happen.
At boot-up, it takes quite a bit more time to boot-up.
For comparison, it took about 10-20 seconds to boot-up previously, but now it is taking about 50-60 seconds.
All of this has happened randomly, and I have no idea what the cause is.
I bought my iMac on Black Friday 2010 from the online store.
Thanks,
JackNon-shutting down might indicate that the Mac is waiting for something to finish before it can complete the process, and whatever that is isn't doing so. Launch Console in Utilities and check the system logs to see what the last thing running was and perhaps that might give you a clue.
-
[Solved] Booting takes longer than usual
Hi guys,
ran into a little problem here.
Hardware: Macbook 5,5 Arch on sdb which is a SDD, data stored on an HDD.
So since yesterday, the booting process takes very long for a SSD system. I don't really get any messages while booting, so i'm a little bit confused.
No USB devices connected, wired internet connection.
Here is the output from dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 (GCC) ) #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000acfecfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000acfed000-0x00000000acfedfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000acfee000-0x00000000ae700fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae701000-0x00000000ae705fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae706000-0x00000000ae710fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae711000-0x00000000ae711fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae712000-0x00000000ae720fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae721000-0x00000000ae721fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae722000-0x00000000ae72afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae72b000-0x00000000ae92bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae92c000-0x00000000aefbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aefbc000-0x00000000aefbcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aefbd000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af000000-0x00000000beffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bf015fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf016000-0x00000000bf016fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf017000-0x00000000bf0a9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0aa000-0x00000000bf0acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0ad000-0x00000000bf0aefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0af000-0x00000000bf0b0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0b1000-0x00000000bf0b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0b3000-0x00000000bf0b7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0b8000-0x00000000bf0b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0ba000-0x00000000bf0bafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0bb000-0x00000000bf0c2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c3000-0x00000000bf0c4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c5000-0x00000000bf0c6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c7000-0x00000000bf0c8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c9000-0x00000000bf10dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf10e000-0x00000000bf111fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf112000-0x00000000bf119fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf11a000-0x00000000bf11cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf11d000-0x00000000bf11efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf11f000-0x00000000bf11ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf120000-0x00000000bf224fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf225000-0x00000000bf225fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf226000-0x00000000bf226fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf227000-0x00000000bf23cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf23d000-0x00000000bf241fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf242000-0x00000000bf242fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf243000-0x00000000bf264fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf265000-0x00000000bf267fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf268000-0x00000000bf26ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf270000-0x00000000bf274fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf275000-0x00000000bf276fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf277000-0x00000000bf277fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf278000-0x00000000bf278fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf279000-0x00000000bf27bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf27ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf280000-0x00000000bf280fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf281000-0x00000000bf709fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf70a000-0x00000000bf70afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70b000-0x00000000bf714fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf715000-0x00000000bf716fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf718fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf719000-0x00000000bf719fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71a000-0x00000000bfe92fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe93000-0x00000000bfe93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfe94000-0x00000000bfe9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9e000-0x00000000bfe9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9f000-0x00000000bfec4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfec5000-0x00000000bfec6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfec7000-0x00000000bfec7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfec8000-0x00000000bfec9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfeca000-0x00000000bfeccfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfecd000-0x00000000bfedefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfedf000-0x00000000bfeeefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfeef000-0x00000000bfef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfef9000-0x00000000bfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3400000-0x00000000d3400fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0xbfeee000 ACPI 2.0=0xbfeee014 SMBIOS=0xbfec6000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem03: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001001000) (15MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000001001000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f01000) (15MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002f01000-0x0000000037a3a000) (843MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000037a3a000-0x0000000037d15000) (2MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037d15000-0x0000000081bf3000) (1182MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000081bf3000-0x00000000acfb1000) (691MB)
[ 0.000000] efi: mem10: type=1, attr=0xf, range=[0x00000000acfb1000-0x00000000acfcf000) (0MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000acfcf000-0x00000000acfd0000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000acfd0000-0x00000000acfed000) (0MB)
[ 0.000000] efi: mem13: type=6, attr=0x800000000000000f, range=[0x00000000acfed000-0x00000000acfee000) (0MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000acfee000-0x00000000ae6c7000) (22MB)
[ 0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000ae6c7000-0x00000000ae6f0000) (0MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000ae6f0000-0x00000000ae6f6000) (0MB)
[ 0.000000] efi: mem17: type=3, attr=0xf, range=[0x00000000ae6f6000-0x00000000ae6f7000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ae6f7000-0x00000000ae6f9000) (0MB)
[ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x00000000ae6f9000-0x00000000ae700000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ae700000-0x00000000ae701000) (0MB)
[ 0.000000] efi: mem21: type=5, attr=0x800000000000000f, range=[0x00000000ae701000-0x00000000ae706000) (0MB)
[ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x00000000ae706000-0x00000000ae709000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000ae709000-0x00000000ae711000) (0MB)
[ 0.000000] efi: mem24: type=6, attr=0x800000000000000f, range=[0x00000000ae711000-0x00000000ae712000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000ae712000-0x00000000ae71b000) (0MB)
[ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000ae71b000-0x00000000ae721000) (0MB)
[ 0.000000] efi: mem27: type=5, attr=0x800000000000000f, range=[0x00000000ae721000-0x00000000ae722000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ae722000-0x00000000ae729000) (0MB)
[ 0.000000] efi: mem29: type=3, attr=0xf, range=[0x00000000ae729000-0x00000000ae72a000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000ae72a000-0x00000000ae72b000) (0MB)
[ 0.000000] efi: mem31: type=10, attr=0xf, range=[0x00000000ae72b000-0x00000000ae92c000) (2MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000ae92c000-0x00000000aef9d000) (6MB)
[ 0.000000] efi: mem33: type=3, attr=0xf, range=[0x00000000aef9d000-0x00000000aefad000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000aefad000-0x00000000aefb4000) (0MB)
[ 0.000000] efi: mem35: type=3, attr=0xf, range=[0x00000000aefb4000-0x00000000aefb6000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000aefb6000-0x00000000aefb8000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000aefb8000-0x00000000aefba000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000aefba000-0x00000000aefbc000) (0MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000aefbc000-0x00000000aefbd000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000aefbd000-0x00000000aefbe000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000aefbe000-0x00000000aefc0000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000aefc0000-0x00000000aefcb000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000aefcb000-0x00000000aefcc000) (0MB)
[ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x00000000aefcc000-0x00000000aefd1000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000aefd1000-0x00000000aefd3000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x00000000aefd3000-0x00000000aefd4000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000aefd4000-0x00000000aefd6000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000aefd6000-0x00000000aefd8000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000aefd8000-0x00000000aefd9000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000aefd9000-0x00000000aefda000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x00000000aefda000-0x00000000aefdd000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000aefdd000-0x00000000aefdf000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000aefdf000-0x00000000aefe1000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000aefe1000-0x00000000aefea000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x00000000aefea000-0x00000000aefec000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000aefec000-0x00000000aefed000) (0MB)
[ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x00000000aefed000-0x00000000aefee000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000aefee000-0x00000000aeff1000) (0MB)
[ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x00000000aeff1000-0x00000000aeff3000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000aeff3000-0x00000000aeff7000) (0MB)
[ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x00000000aeff7000-0x00000000aeffb000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000aeffb000-0x00000000aeffc000) (0MB)
[ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x00000000aeffc000-0x00000000aeffd000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000aeffd000-0x00000000af000000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000bf000000-0x00000000bf004000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x00000000bf004000-0x00000000bf006000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000bf006000-0x00000000bf00b000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x00000000bf00b000-0x00000000bf013000) (0MB)
[ 0.000000] efi: mem69: type=3, attr=0xf, range=[0x00000000bf013000-0x00000000bf015000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000bf015000-0x00000000bf016000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000bf016000-0x00000000bf017000) (0MB)
[ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x00000000bf017000-0x00000000bf026000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000bf026000-0x00000000bf027000) (0MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x00000000bf027000-0x00000000bf029000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000bf029000-0x00000000bf02b000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x00000000bf02b000-0x00000000bf030000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000bf030000-0x00000000bf031000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x00000000bf031000-0x00000000bf037000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000bf037000-0x00000000bf03a000) (0MB)
[ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x00000000bf03a000-0x00000000bf03e000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x00000000bf03e000-0x00000000bf03f000) (0MB)
[ 0.000000] efi: mem82: type=3, attr=0xf, range=[0x00000000bf03f000-0x00000000bf044000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x00000000bf044000-0x00000000bf046000) (0MB)
[ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x00000000bf046000-0x00000000bf048000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x00000000bf048000-0x00000000bf04a000) (0MB)
[ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x00000000bf04a000-0x00000000bf04b000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000bf04b000-0x00000000bf04c000) (0MB)
[ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x00000000bf04c000-0x00000000bf06b000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000bf06b000-0x00000000bf06d000) (0MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000bf06d000-0x00000000bf073000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000bf073000-0x00000000bf074000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000bf074000-0x00000000bf078000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000bf078000-0x00000000bf07a000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000bf07a000-0x00000000bf081000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000bf081000-0x00000000bf083000) (0MB)
[ 0.000000] efi: mem96: type=3, attr=0xf, range=[0x00000000bf083000-0x00000000bf084000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000bf084000-0x00000000bf086000) (0MB)
[ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x00000000bf086000-0x00000000bf089000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x00000000bf089000-0x00000000bf08a000) (0MB)
[ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x00000000bf08a000-0x00000000bf0a5000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x00000000bf0a5000-0x00000000bf0a8000) (0MB)
[ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x00000000bf0a8000-0x00000000bf0a9000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x00000000bf0a9000-0x00000000bf0aa000) (0MB)
[ 0.000000] efi: mem104: type=6, attr=0x800000000000000f, range=[0x00000000bf0aa000-0x00000000bf0ab000) (0MB)
[ 0.000000] efi: mem105: type=5, attr=0x800000000000000f, range=[0x00000000bf0ab000-0x00000000bf0ad000) (0MB)
[ 0.000000] efi: mem106: type=4, attr=0xf, range=[0x00000000bf0ad000-0x00000000bf0af000) (0MB)
[ 0.000000] efi: mem107: type=5, attr=0x800000000000000f, range=[0x00000000bf0af000-0x00000000bf0b1000) (0MB)
[ 0.000000] efi: mem108: type=4, attr=0xf, range=[0x00000000bf0b1000-0x00000000bf0b3000) (0MB)
[ 0.000000] efi: mem109: type=5, attr=0x800000000000000f, range=[0x00000000bf0b3000-0x00000000bf0b8000) (0MB)
[ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x00000000bf0b8000-0x00000000bf0b9000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x00000000bf0b9000-0x00000000bf0ba000) (0MB)
[ 0.000000] efi: mem112: type=5, attr=0x800000000000000f, range=[0x00000000bf0ba000-0x00000000bf0bb000) (0MB)
[ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x00000000bf0bb000-0x00000000bf0c0000) (0MB)
[ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x00000000bf0c0000-0x00000000bf0c2000) (0MB)
[ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x00000000bf0c2000-0x00000000bf0c3000) (0MB)
[ 0.000000] efi: mem116: type=10, attr=0xf, range=[0x00000000bf0c3000-0x00000000bf0c5000) (0MB)
[ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x00000000bf0c5000-0x00000000bf0c7000) (0MB)
[ 0.000000] efi: mem118: type=10, attr=0xf, range=[0x00000000bf0c7000-0x00000000bf0c9000) (0MB)
[ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x00000000bf0c9000-0x00000000bf10e000) (0MB)
[ 0.000000] efi: mem120: type=5, attr=0x800000000000000f, range=[0x00000000bf10e000-0x00000000bf112000) (0MB)
[ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x00000000bf112000-0x00000000bf118000) (0MB)
[ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x00000000bf118000-0x00000000bf11a000) (0MB)
[ 0.000000] efi: mem123: type=5, attr=0x800000000000000f, range=[0x00000000bf11a000-0x00000000bf11d000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000bf11d000-0x00000000bf11f000) (0MB)
[ 0.000000] efi: mem125: type=6, attr=0x800000000000000f, range=[0x00000000bf11f000-0x00000000bf120000) (0MB)
[ 0.000000] efi: mem126: type=4, attr=0xf, range=[0x00000000bf120000-0x00000000bf122000) (0MB)
[ 0.000000] efi: mem127: type=3, attr=0xf, range=[0x00000000bf122000-0x00000000bf125000) (0MB)
[ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x00000000bf125000-0x00000000bf137000) (0MB)
[ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x00000000bf137000-0x00000000bf140000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x00000000bf140000-0x00000000bf201000) (0MB)
[ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x00000000bf201000-0x00000000bf20e000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x00000000bf20e000-0x00000000bf20f000) (0MB)
[ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x00000000bf20f000-0x00000000bf213000) (0MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x00000000bf213000-0x00000000bf221000) (0MB)
[ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x00000000bf221000-0x00000000bf223000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x00000000bf223000-0x00000000bf224000) (0MB)
[ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x00000000bf224000-0x00000000bf225000) (0MB)
[ 0.000000] efi: mem138: type=5, attr=0x800000000000000f, range=[0x00000000bf225000-0x00000000bf226000) (0MB)
[ 0.000000] efi: mem139: type=3, attr=0xf, range=[0x00000000bf226000-0x00000000bf227000) (0MB)
[ 0.000000] efi: mem140: type=6, attr=0x800000000000000f, range=[0x00000000bf227000-0x00000000bf239000) (0MB)
[ 0.000000] efi: mem141: type=5, attr=0x800000000000000f, range=[0x00000000bf239000-0x00000000bf23d000) (0MB)
[ 0.000000] efi: mem142: type=4, attr=0xf, range=[0x00000000bf23d000-0x00000000bf23e000) (0MB)
[ 0.000000] efi: mem143: type=3, attr=0xf, range=[0x00000000bf23e000-0x00000000bf23f000) (0MB)
[ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x00000000bf23f000-0x00000000bf242000) (0MB)
[ 0.000000] efi: mem145: type=6, attr=0x800000000000000f, range=[0x00000000bf242000-0x00000000bf243000) (0MB)
[ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x00000000bf243000-0x00000000bf244000) (0MB)
[ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x00000000bf244000-0x00000000bf247000) (0MB)
[ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x00000000bf247000-0x00000000bf24d000) (0MB)
[ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x00000000bf24d000-0x00000000bf250000) (0MB)
[ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x00000000bf250000-0x00000000bf253000) (0MB)
[ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x00000000bf253000-0x00000000bf265000) (0MB)
[ 0.000000] efi: mem152: type=5, attr=0x800000000000000f, range=[0x00000000bf265000-0x00000000bf268000) (0MB)
[ 0.000000] efi: mem153: type=3, attr=0xf, range=[0x00000000bf268000-0x00000000bf26c000) (0MB)
[ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x00000000bf26c000-0x00000000bf26d000) (0MB)
[ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x00000000bf26d000-0x00000000bf26e000) (0MB)
[ 0.000000] efi: mem156: type=4, attr=0xf, range=[0x00000000bf26e000-0x00000000bf270000) (0MB)
[ 0.000000] efi: mem157: type=6, attr=0x800000000000000f, range=[0x00000000bf270000-0x00000000bf272000) (0MB)
[ 0.000000] efi: mem158: type=5, attr=0x800000000000000f, range=[0x00000000bf272000-0x00000000bf274000) (0MB)
[ 0.000000] efi: mem159: type=6, attr=0x800000000000000f, range=[0x00000000bf274000-0x00000000bf275000) (0MB)
[ 0.000000] efi: mem160: type=4, attr=0xf, range=[0x00000000bf275000-0x00000000bf276000) (0MB)
[ 0.000000] efi: mem161: type=3, attr=0xf, range=[0x00000000bf276000-0x00000000bf277000) (0MB)
[ 0.000000] efi: mem162: type=5, attr=0x800000000000000f, range=[0x00000000bf277000-0x00000000bf278000) (0MB)
[ 0.000000] efi: mem163: type=4, attr=0xf, range=[0x00000000bf278000-0x00000000bf279000) (0MB)
[ 0.000000] efi: mem164: type=5, attr=0x800000000000000f, range=[0x00000000bf279000-0x00000000bf27c000) (0MB)
[ 0.000000] efi: mem165: type=4, attr=0xf, range=[0x00000000bf27c000-0x00000000bf27d000) (0MB)
[ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x00000000bf27d000-0x00000000bf27e000) (0MB)
[ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x00000000bf27e000-0x00000000bf280000) (0MB)
[ 0.000000] efi: mem168: type=6, attr=0x800000000000000f, range=[0x00000000bf280000-0x00000000bf281000) (0MB)
[ 0.000000] efi: mem169: type=3, attr=0xf, range=[0x00000000bf281000-0x00000000bf282000) (0MB)
[ 0.000000] efi: mem170: type=4, attr=0xf, range=[0x00000000bf282000-0x00000000bf6a4000) (4MB)
[ 0.000000] efi: mem171: type=3, attr=0xf, range=[0x00000000bf6a4000-0x00000000bf6a8000) (0MB)
[ 0.000000] efi: mem172: type=4, attr=0xf, range=[0x00000000bf6a8000-0x00000000bf70a000) (0MB)
[ 0.000000] efi: mem173: type=6, attr=0x800000000000000f, range=[0x00000000bf70a000-0x00000000bf70b000) (0MB)
[ 0.000000] efi: mem174: type=4, attr=0xf, range=[0x00000000bf70b000-0x00000000bf70c000) (0MB)
[ 0.000000] efi: mem175: type=3, attr=0xf, range=[0x00000000bf70c000-0x00000000bf712000) (0MB)
[ 0.000000] efi: mem176: type=4, attr=0xf, range=[0x00000000bf712000-0x00000000bf713000) (0MB)
[ 0.000000] efi: mem177: type=3, attr=0xf, range=[0x00000000bf713000-0x00000000bf715000) (0MB)
[ 0.000000] efi: mem178: type=5, attr=0x800000000000000f, range=[0x00000000bf715000-0x00000000bf717000) (0MB)
[ 0.000000] efi: mem179: type=3, attr=0xf, range=[0x00000000bf717000-0x00000000bf718000) (0MB)
[ 0.000000] efi: mem180: type=4, attr=0xf, range=[0x00000000bf718000-0x00000000bf719000) (0MB)
[ 0.000000] efi: mem181: type=5, attr=0x800000000000000f, range=[0x00000000bf719000-0x00000000bf71a000) (0MB)
[ 0.000000] efi: mem182: type=3, attr=0xf, range=[0x00000000bf71a000-0x00000000bf71b000) (0MB)
[ 0.000000] efi: mem183: type=4, attr=0xf, range=[0x00000000bf71b000-0x00000000bfe93000) (7MB)
[ 0.000000] efi: mem184: type=6, attr=0x800000000000000f, range=[0x00000000bfe93000-0x00000000bfe94000) (0MB)
[ 0.000000] efi: mem185: type=4, attr=0xf, range=[0x00000000bfe94000-0x00000000bfe9e000) (0MB)
[ 0.000000] efi: mem186: type=6, attr=0x800000000000000f, range=[0x00000000bfe9e000-0x00000000bfe9f000) (0MB)
[ 0.000000] efi: mem187: type=7, attr=0xf, range=[0x00000000bfe9f000-0x00000000bfeba000) (0MB)
[ 0.000000] efi: mem188: type=2, attr=0xf, range=[0x00000000bfeba000-0x00000000bfec5000) (0MB)
[ 0.000000] efi: mem189: type=10, attr=0xf, range=[0x00000000bfec5000-0x00000000bfec7000) (0MB)
[ 0.000000] efi: mem190: type=9, attr=0xf, range=[0x00000000bfec7000-0x00000000bfec8000) (0MB)
[ 0.000000] efi: mem191: type=10, attr=0xf, range=[0x00000000bfec8000-0x00000000bfeca000) (0MB)
[ 0.000000] efi: mem192: type=9, attr=0xf, range=[0x00000000bfeca000-0x00000000bfecd000) (0MB)
[ 0.000000] efi: mem193: type=10, attr=0xf, range=[0x00000000bfecd000-0x00000000bfedf000) (0MB)
[ 0.000000] efi: mem194: type=9, attr=0xf, range=[0x00000000bfedf000-0x00000000bfeef000) (0MB)
[ 0.000000] efi: mem195: type=7, attr=0xf, range=[0x00000000bfeef000-0x00000000bfef9000) (0MB)
[ 0.000000] efi: mem196: type=0, attr=0xf, range=[0x00000000bfef9000-0x00000000bfeff000) (0MB)
[ 0.000000] efi: mem197: type=6, attr=0x800000000000000f, range=[0x00000000bfeff000-0x00000000bff00000) (0MB)
[ 0.000000] efi: mem198: type=7, attr=0xf, range=[0x0000000100000000-0x0000000240000000) (5120MB)
[ 0.000000] efi: mem199: type=0, attr=0x8000000000000000, range=[0x00000000af000000-0x00000000bf000000) (256MB)
[ 0.000000] efi: mem200: type=11, attr=0x8000000000000000, range=[0x00000000d3400000-0x00000000d3401000) (0MB)
[ 0.000000] efi: mem201: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc40000) (0MB)
[ 0.000000] efi: mem202: type=11, attr=0x8000000000000000, range=[0x00000000ffc40000-0x00000000ffc80000) (0MB)
[ 0.000000] efi: mem203: type=11, attr=0x8000000000000000, range=[0x00000000ffc80000-0x00000000ffca4000) (0MB)
[ 0.000000] efi: mem204: type=11, attr=0x8000000000000000, range=[0x00000000ffca4000-0x00000000ffcb4000) (0MB)
[ 0.000000] efi: mem205: type=11, attr=0x8000000000000000, range=[0x00000000ffcb4000-0x00000000ffffc000) (3MB)
[ 0.000000] efi: mem206: type=11, attr=0x8000000000000000, range=[0x00000000ffffc000-0x0000000100000000) (0MB)
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookPro5,5/Mac-F2268AC8, BIOS MBP55.88Z.00AC.B03.0906151708 06/15/09
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfef9 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfef8fff]
[ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfef8fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbfef8fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fffffff]
[ 0.000000] [mem 0x100000000-0x23fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x23fffffff @ [mem 0xbfef3000-0xbfef8fff]
[ 0.000000] RAMDISK: [mem 0x37a3a000-0x37d14fff]
[ 0.000000] ACPI: RSDP 00000000bfeee014 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bfeee1c0 00074 (v01 APPLE Apple00 000000AC 01000013)
[ 0.000000] ACPI: FACP 00000000bfeec000 000F4 (v04 APPLE Apple00 000000AC Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bfedf000 05B9E (v01 APPLE MacBookP 00050005 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bfecd000 00040
[ 0.000000] ACPI: HPET 00000000bfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfee9000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 00000000bfee8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bfee7000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bfee6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bfee5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bfeca000 0023A (v00 SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fffb000-0x23fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237800000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xacfecfff]
[ 0.000000] node 0: [mem 0xacfee000-0xae700fff]
[ 0.000000] node 0: [mem 0xae706000-0xae710fff]
[ 0.000000] node 0: [mem 0xae712000-0xae720fff]
[ 0.000000] node 0: [mem 0xae722000-0xae72afff]
[ 0.000000] node 0: [mem 0xae92c000-0xaefbbfff]
[ 0.000000] node 0: [mem 0xaefbd000-0xaeffffff]
[ 0.000000] node 0: [mem 0xbf000000-0xbf015fff]
[ 0.000000] node 0: [mem 0xbf017000-0xbf0a9fff]
[ 0.000000] node 0: [mem 0xbf0ad000-0xbf0aefff]
[ 0.000000] node 0: [mem 0xbf0b1000-0xbf0b2fff]
[ 0.000000] node 0: [mem 0xbf0b8000-0xbf0b9fff]
[ 0.000000] node 0: [mem 0xbf0bb000-0xbf0c2fff]
[ 0.000000] node 0: [mem 0xbf0c5000-0xbf0c6fff]
[ 0.000000] node 0: [mem 0xbf0c9000-0xbf10dfff]
[ 0.000000] node 0: [mem 0xbf112000-0xbf119fff]
[ 0.000000] node 0: [mem 0xbf11d000-0xbf11efff]
[ 0.000000] node 0: [mem 0xbf120000-0xbf224fff]
[ 0.000000] node 0: [mem 0xbf226000-0xbf226fff]
[ 0.000000] node 0: [mem 0xbf23d000-0xbf241fff]
[ 0.000000] node 0: [mem 0xbf243000-0xbf264fff]
[ 0.000000] node 0: [mem 0xbf268000-0xbf26ffff]
[ 0.000000] node 0: [mem 0xbf275000-0xbf276fff]
[ 0.000000] node 0: [mem 0xbf278000-0xbf278fff]
[ 0.000000] node 0: [mem 0xbf27c000-0xbf27ffff]
[ 0.000000] node 0: [mem 0xbf281000-0xbf709fff]
[ 0.000000] node 0: [mem 0xbf70b000-0xbf714fff]
[ 0.000000] node 0: [mem 0xbf717000-0xbf718fff]
[ 0.000000] node 0: [mem 0xbf71a000-0xbfe92fff]
[ 0.000000] node 0: [mem 0xbfe94000-0xbfe9dfff]
[ 0.000000] node 0: [mem 0xbfe9f000-0xbfec4fff]
[ 0.000000] node 0: [mem 0xbfeef000-0xbfef8fff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2030609
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 10 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11187 pages used for memmap
[ 0.000000] DMA32 zone: 704719 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1290240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000acfed000 - 00000000acfee000
[ 0.000000] PM: Registered nosave memory: 00000000ae701000 - 00000000ae706000
[ 0.000000] PM: Registered nosave memory: 00000000ae711000 - 00000000ae712000
[ 0.000000] PM: Registered nosave memory: 00000000ae721000 - 00000000ae722000
[ 0.000000] PM: Registered nosave memory: 00000000ae72b000 - 00000000ae92c000
[ 0.000000] PM: Registered nosave memory: 00000000aefbc000 - 00000000aefbd000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
[ 0.000000] PM: Registered nosave memory: 00000000bf016000 - 00000000bf017000
[ 0.000000] PM: Registered nosave memory: 00000000bf0aa000 - 00000000bf0ad000
[ 0.000000] PM: Registered nosave memory: 00000000bf0af000 - 00000000bf0b1000
[ 0.000000] PM: Registered nosave memory: 00000000bf0b3000 - 00000000bf0b8000
[ 0.000000] PM: Registered nosave memory: 00000000bf0ba000 - 00000000bf0bb000
[ 0.000000] PM: Registered nosave memory: 00000000bf0c3000 - 00000000bf0c5000
[ 0.000000] PM: Registered nosave memory: 00000000bf0c7000 - 00000000bf0c9000
[ 0.000000] PM: Registered nosave memory: 00000000bf10e000 - 00000000bf112000
[ 0.000000] PM: Registered nosave memory: 00000000bf11a000 - 00000000bf11d000
[ 0.000000] PM: Registered nosave memory: 00000000bf11f000 - 00000000bf120000
[ 0.000000] PM: Registered nosave memory: 00000000bf225000 - 00000000bf226000
[ 0.000000] PM: Registered nosave memory: 00000000bf227000 - 00000000bf23d000
[ 0.000000] PM: Registered nosave memory: 00000000bf242000 - 00000000bf243000
[ 0.000000] PM: Registered nosave memory: 00000000bf265000 - 00000000bf268000
[ 0.000000] PM: Registered nosave memory: 00000000bf270000 - 00000000bf275000
[ 0.000000] PM: Registered nosave memory: 00000000bf277000 - 00000000bf278000
[ 0.000000] PM: Registered nosave memory: 00000000bf279000 - 00000000bf27c000
[ 0.000000] PM: Registered nosave memory: 00000000bf280000 - 00000000bf281000
[ 0.000000] PM: Registered nosave memory: 00000000bf70a000 - 00000000bf70b000
[ 0.000000] PM: Registered nosave memory: 00000000bf715000 - 00000000bf717000
[ 0.000000] PM: Registered nosave memory: 00000000bf719000 - 00000000bf71a000
[ 0.000000] PM: Registered nosave memory: 00000000bfe93000 - 00000000bfe94000
[ 0.000000] PM: Registered nosave memory: 00000000bfe9e000 - 00000000bfe9f000
[ 0.000000] PM: Registered nosave memory: 00000000bfec5000 - 00000000bfec7000
[ 0.000000] PM: Registered nosave memory: 00000000bfec7000 - 00000000bfec8000
[ 0.000000] PM: Registered nosave memory: 00000000bfec8000 - 00000000bfeca000
[ 0.000000] PM: Registered nosave memory: 00000000bfeca000 - 00000000bfecd000
[ 0.000000] PM: Registered nosave memory: 00000000bfecd000 - 00000000bfedf000
[ 0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000bfeef000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d3400000
[ 0.000000] PM: Registered nosave memory: 00000000d3400000 - 00000000d3401000
[ 0.000000] PM: Registered nosave memory: 00000000d3401000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd3401000-0xffbfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s85184 r8192 d21312 u1048576
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998868
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7867236k/9437184k available (4908k kernel code, 1314748k absent, 255200k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33030144 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2520.552 MHz processor
[ 0.006670] Calibrating delay loop (skipped), value calculated using timer frequency.. 5043.15 BogoMIPS (lpj=8401840)
[ 0.006674] pid_max: default: 32768 minimum: 301
[ 0.006728] init_memory_mapping: [mem 0xbfeff000-0xbfefffff]
[ 0.006732] [mem 0xbfeff000-0xbfefffff] page 4k
[ 0.108797] Security Framework initialized
[ 0.108812] AppArmor: AppArmor disabled by boot time parameter
[ 0.109405] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.113644] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.115625] Mount-cache hash table entries: 256
[ 0.115855] Initializing cgroup subsys cpuacct
[ 0.115861] Initializing cgroup subsys memory
[ 0.115872] Initializing cgroup subsys devices
[ 0.115873] Initializing cgroup subsys freezer
[ 0.115875] Initializing cgroup subsys net_cls
[ 0.115876] Initializing cgroup subsys blkio
[ 0.115906] CPU: Physical Processor ID: 0
[ 0.115908] CPU: Processor Core ID: 0
[ 0.115909] mce: CPU supports 6 MCE banks
[ 0.115917] CPU0: Thermal monitoring enabled (TM2)
[ 0.115921] process: using mwait in idle threads
[ 0.115926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.116037] Freeing SMP alternatives: 20k freed
[ 0.117279] ACPI: Core revision 20121018
[ 0.122421] ftrace: allocating 19310 entries in 76 pages
[ 0.127205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.162234] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz (fam: 06, model: 17, stepping: 0a)
[ 0.163333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.163333] ... version: 2
[ 0.163333] ... bit width: 40
[ 0.163333] ... generic registers: 2
[ 0.163333] ... value mask: 000000ffffffffff
[ 0.163333] ... max period: 000000007fffffff
[ 0.163333] ... fixed-purpose events: 3
[ 0.163333] ... event mask: 0000000700000003
[ 0.183381] smpboot: Booting Node 0, Processors #1 OK
[ 0.196585] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.196598] Brought up 2 CPUs
[ 0.196600] smpboot: Total of 2 processors activated (10086.30 BogoMIPS)
[ 0.196754] devtmpfs: initialized
[ 0.200695] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xae72b000-0xae92bfff] (2101248 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbf0c3000-0xbf0c4fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbf0c7000-0xbf0c8fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbfec5000-0xbfec6fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbfec8000-0xbfec9fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbfecd000-0xbfedefff] (73728 bytes)
[ 0.200695] reboot: PCI series board detected. Selecting Apple MacBookPro5-method for reboots.
[ 0.200968] RTC time: 19:38:09, date: 04/10/13
[ 0.201010] NET: Registered protocol family 16
[ 0.201155] ACPI: bus type pci registered
[ 0.201432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.201436] PCI: not using MMCONFIG
[ 0.201437] PCI: Using configuration type 1 for base access
[ 0.202036] bio: create slab <bio-0> at 0
[ 0.202036] ACPI: Added _OSI(Module Device)
[ 0.202036] ACPI: Added _OSI(Processor Device)
[ 0.202036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.202036] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.203975] ACPI: EC: EC description table is found, configuring boot EC
[ 0.204980] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.205258] ACPI: SSDT 00000000bfec9c18 002BC (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.206701] ACPI: Dynamic OEM Table Load:
[ 0.206704] ACPI: SSDT (null) 002BC (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.206781] ACPI: SSDT 00000000bfec9918 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.207019] ACPI: Dynamic OEM Table Load:
[ 0.207021] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.207035] ACPI: SSDT 00000000bfec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.207092] ACPI: Dynamic OEM Table Load:
[ 0.207095] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.207166] ACPI: SSDT 00000000bfec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.207404] ACPI: Dynamic OEM Table Load:
[ 0.207406] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.210187] ACPI: Interpreter enabled
[ 0.210191] ACPI: (supports S0 S3 S4 S5)
[ 0.210205] ACPI: Using IOAPIC for interrupt routing
[ 0.210218] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.211630] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
[ 0.211633] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.250237] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 0.250366] ACPI: No dock devices found.
[ 0.250370] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.250424] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.250427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.253481] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.253598] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.253674] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce7ff])
[ 0.253679] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.253708] PCI host bridge to bus 0000:00
[ 0.253711] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.253713] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.253715] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.253717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.253719] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.253721] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.253723] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.253725] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.253727] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.253729] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.253731] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.253733] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.253735] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.253737] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.253739] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.253741] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.253743] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.253757] pci 0000:00:00.0: [10de:0a82] type 00 class 0x060000
[ 0.253858] pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
[ 0.254001] pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100
[ 0.254010] pci 0000:00:03.0: reg 10: [io 0x2000-0x20ff]
[ 0.254052] pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
[ 0.254130] pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
[ 0.254143] pci 0000:00:03.2: reg 10: [io 0x2180-0x21bf]
[ 0.254163] pci 0000:00:03.2: reg 20: [io 0x2140-0x217f]
[ 0.254169] pci 0000:00:03.2: reg 24: [io 0x2100-0x213f]
[ 0.254203] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.254225] pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
[ 0.254362] pci 0000:00:03.4: [10de:0a98] type 00 class 0x050000
[ 0.254418] pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
[ 0.254436] pci 0000:00:03.5: reg 10: [mem 0xd3400000-0xd347ffff]
[ 0.254561] pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
[ 0.254572] pci 0000:00:04.0: reg 10: [mem 0xd3488000-0xd3488fff]
[ 0.254616] pci 0000:00:04.0: supports D1 D2
[ 0.254618] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254634] pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
[ 0.254647] pci 0000:00:04.1: reg 10: [mem 0xd3489200-0xd34892ff]
[ 0.254700] pci 0000:00:04.1: supports D1 D2
[ 0.254702] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254725] pci 0000:00:06.0: [10de:0aa7] type 00 class 0x0c0310
[ 0.254736] pci 0000:00:06.0: reg 10: [mem 0xd3487000-0xd3487fff]
[ 0.254780] pci 0000:00:06.0: supports D1 D2
[ 0.254782] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254797] pci 0000:00:06.1: [10de:0aa9] type 00 class 0x0c0320
[ 0.254809] pci 0000:00:06.1: reg 10: [mem 0xd3489100-0xd34891ff]
[ 0.254862] pci 0000:00:06.1: supports D1 D2
[ 0.254864] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254887] pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
[ 0.254898] pci 0000:00:08.0: reg 10: [mem 0xd3480000-0xd3483fff]
[ 0.254943] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.254955] pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
[ 0.255000] pci 0000:00:0a.0: [10de:0ab0] type 00 class 0x020000
[ 0.255011] pci 0000:00:0a.0: reg 10: [mem 0xd3486000-0xd3486fff]
[ 0.255017] pci 0000:00:0a.0: reg 14: [io 0x21e0-0x21e7]
[ 0.255022] pci 0000:00:0a.0: reg 18: [mem 0xd3489000-0xd34890ff]
[ 0.255028] pci 0000:00:0a.0: reg 1c: [mem 0xd3489300-0xd348930f]
[ 0.255064] pci 0000:00:0a.0: supports D1 D2
[ 0.255066] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255083] pci 0000:00:0b.0: [10de:0ab9] type 00 class 0x010601
[ 0.255094] pci 0000:00:0b.0: reg 10: [io 0x21d8-0x21df]
[ 0.255099] pci 0000:00:0b.0: reg 14: [io 0x21ec-0x21ef]
[ 0.255105] pci 0000:00:0b.0: reg 18: [io 0x21d0-0x21d7]
[ 0.255110] pci 0000:00:0b.0: reg 1c: [io 0x21e8-0x21eb]
[ 0.255116] pci 0000:00:0b.0: reg 20: [io 0x21c0-0x21cf]
[ 0.255121] pci 0000:00:0b.0: reg 24: [mem 0xd3484000-0xd3485fff]
[ 0.255164] pci 0000:00:10.0: [10de:0aa0] type 01 class 0x060400
[ 0.255201] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255257] pci 0000:00:15.0: [10de:0ac6] type 01 class 0x060400
[ 0.255474] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255557] pci 0000:00:16.0: [10de:0ac7] type 01 class 0x060400
[ 0.255773] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255870] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.255875] pci 0000:00:09.0: bridge window [mem 0xd3300000-0xd33fffff]
[ 0.255878] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.255880] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.255882] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.255884] pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.255886] pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.255888] pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.255890] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.255892] pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.255894] pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.255896] pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.255898] pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.255900] pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.255902] pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.255904] pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.255906] pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.255908] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.255937] pci 0000:02:00.0: [10de:0863] type 00 class 0x030000
[ 0.255951] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.255960] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.255970] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.255976] pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
[ 0.255983] pci 0000:02:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[ 0.256041] pci 0000:00:10.0: PCI bridge to [bus 02]
[ 0.256044] pci 0000:00:10.0: bridge window [io 0x1000-0x1fff]
[ 0.256047] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.256051] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.256356] pci 0000:03:00.0: [14e4:432b] type 00 class 0x028000
[ 0.256375] pci 0000:03:00.0: reg 10: [mem 0xd3200000-0xd3203fff 64bit]
[ 0.256469] pci 0000:03:00.0: supports D1 D2
[ 0.256471] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.260174] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.260193] pci 0000:00:15.0: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.260357] pci 0000:04:00.0: [11c1:5901] type 00 class 0x0c0010
[ 0.260378] pci 0000:04:00.0: reg 10: [mem 0xd3100000-0xd3100fff 64bit]
[ 0.260471] pci 0000:04:00.0: supports D1 D2
[ 0.260473] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.266686] pci 0000:00:16.0: PCI bridge to [bus 04]
[ 0.266706] pci 0000:00:16.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.266790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.268128] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *16
[ 0.268199] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *16
[ 0.268267] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *16
[ 0.268335] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *16
[ 0.268404] ACPI: PCI Interrupt Link [Z003] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268474] ACPI: PCI Interrupt Link [Z004] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268542] ACPI: PCI Interrupt Link [Z005] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268610] ACPI: PCI Interrupt Link [Z006] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268676] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268743] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268809] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268877] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268945] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269013] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269081] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269153] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269223] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269293] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269365] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269439] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269508] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269576] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269644] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269712] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269779] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.269848] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.269917] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.269984] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270059] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270127] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270196] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270265] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270333] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.270403] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.270471] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.270539] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.270606] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 *20 21 22 23)
[ 0.270674] ACPI: PCI Interrupt Link [LGPU] (IRQs *16 17 18 19 20 21 22 23)
[ 0.270740] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.270808] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.270876] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.270944] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.271011] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.271077] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.271142] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.271142] vgaarb: loaded
[ 0.271142] vgaarb: bridge control possible 0000:02:00.0
[ 0.271142] PCI: Using ACPI for IRQ routing
[ 0.271777] PCI: pci_cache_line_size set to 64 bytes
[ 0.272167] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.272169] e820: reserve RAM buffer [mem 0xacfed000-0xafffffff]
[ 0.272171] e820: reserve RAM buffer [mem 0xae701000-0xafffffff]
[ 0.272173] e820: reserve RAM buffer [mem 0xae711000-0xafffffff]
[ 0.272175] e820: reserve RAM buffer [mem 0xae721000-0xafffffff]
[ 0.272177] e820: reserve RAM buffer [mem 0xae72b000-0xafffffff]
[ 0.273335] e820: reserve RAM buffer [mem 0xaefbc000-0xafffffff]
[ 0.273337] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.273338] e820: reserve RAM buffer [mem 0xbf016000-0xbfffffff]
[ 0.273346] e820: reserve RAM buffer [mem 0xbf0aa000-0xbfffffff]
[ 0.273355] e820: reserve RAM buffer [mem 0xbf0af000-0xbfffffff]
[ 0.273363] e820: reserve RAM buffer [mem 0xbf0b3000-0xbfffffff]
[ 0.273371] e820: reserve RAM buffer [mem 0xbf0ba000-0xbfffffff]
[ 0.273378] e820: reserve RAM buffer [mem 0xbf0c3000-0xbfffffff]
[ 0.273386] e820: reserve RAM buffer [mem 0xbf0c7000-0xbfffffff]
[ 0.273393] e820: reserve RAM buffer [mem 0xbf10e000-0xbfffffff]
[ 0.273400] e820: reserve RAM buffer [mem 0xbf11a000-0xbfffffff]
[ 0.273407] e820: reserve RAM buffer [mem 0xbf11f000-0xbfffffff]
[ 0.273414] e820: reserve RAM buffer [mem 0xbf225000-0xbfffffff]
[ 0.273420] e820: reserve RAM buffer [mem 0xbf227000-0xbfffffff]
[ 0.273427] e820: reserve RAM buffer [mem 0xbf242000-0xbfffffff]
[ 0.273433] e820: reserve RAM buffer [mem 0xbf265000-0xbfffffff]
[ 0.273439] e820: reserve RAM buffer [mem 0xbf270000-0xbfffffff]
[ 0.273444] e820: reserve RAM buffer [mem 0xbf277000-0xbfffffff]
[ 0.273449] e820: reserve RAM buffer [mem 0xbf279000-0xbfffffff]
[ 0.273454] e820: reserve RAM buffer [mem 0xbf280000-0xbfffffff]
[ 0.273459] e820: reserve RAM buffer [mem 0xbf70a000-0xbfffffff]
[ 0.273463] e820: reserve RAM buffer [mem 0xbf715000-0xbfffffff]
[ 0.273467] e820: reserve RAM buffer [mem 0xbf719000-0xbfffffff]
[ 0.273471] e820: reserve RAM buffer [mem 0xbfe93000-0xbfffffff]
[ 0.273475] e820: reserve RAM buffer [mem 0xbfe9e000-0xbfffffff]
[ 0.273478] e820: reserve RAM buffer [mem 0xbfec5000-0xbfffffff]
[ 0.273481] e820: reserve RAM buffer [mem 0xbfef9000-0xbfffffff]
[ 0.273574] NetLabel: Initializing
[ 0.273576] NetLabel: domain hash size = 128
[ 0.273577] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273589] NetLabel: unlabeled traffic allowed by default
[ 0.273602] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.273607] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.273612] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.283342] Switching to clocksource hpet
[ 0.289156] pnp: PnP ACPI init
[ 0.289175] ACPI: bus type pnp registered
[ 0.289295] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.289300] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289343] pnp 00:01: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.289394] pnp 00:02: [dma 4]
[ 0.289421] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.289505] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.289509] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.289543] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.289640] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.289642] system 00:05: [io 0x0480-0x04ff] has been reserved
[ 0.289644] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.289647] system 00:05: [io 0x0580-0x05ff] has been reserved
[ 0.289649] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.289651] system 00:05: [io 0x0880-0x08ff] has been reserved
[ 0.289653] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.289656] system 00:05: [io 0x0295-0x0296] has been reserved
[ 0.289659] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289687] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.293453] pnp: PnP ACPI: found 7 devices
[ 0.293455] ACPI: ACPI bus type pnp unregistered
[ 0.300917] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.300923] pci 0000:00:09.0: bridge window [mem 0xd3300000-0xd33fffff]
[ 0.300929] pci 0000:00:10.0: PCI bridge to [bus 02]
[ 0.300932] pci 0000:00:10.0: bridge window [io 0x1000-0x1fff]
[ 0.300935] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.300938] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.300942] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.300952] pci 0000:00:15.0: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.300971] pci 0000:00:16.0: PCI bridge to [bus 04]
[ 0.300981] pci 0000:00:16.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.301002] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.301008] pci 0000:00:09.0: setting latency timer to 64
[ 0.301013] pci 0000:00:10.0: setting latency timer to 64
[ 0.301131] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 21
[ 0.301247] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 19
[ 0.301258] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.301261] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.301263] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301265] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.301267] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.301269] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.301271] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.301273] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.301274] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.301276] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.301278] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.301280] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.301282] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.301284] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.301286] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.301288] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.301290] pci_bus 0000:01: resource 1 [mem 0xd3300000-0xd33fffff]
[ 0.301292] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.301294] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.301296] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301298] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.301300] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.301302] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.301304] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.301306] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.301307] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]Sorry i don't really know how to access the boot messages? All other distros stored this information in /var/log/boot but i assume Arch doesn't :-/
peter@antartica ~ $ systemd-analyze blame
5s 12ms 753us [email protected]
276ms 771us wicd.service
170ms 510us bluetooth.service
163ms 497us systemd-udev-trigger.service
136ms 982us alsa-restore.service
114ms 708us laptop-mode.service
109ms 867us lm_sensors.service
83ms 663us tmp.mount
73ms 285us systemd-vconsole-setup.service
73ms 251us systemd-tmpfiles-setup.service
68ms 116us polkit.service
67ms 1us sys-kernel-debug.mount
64ms 340us systemd-sysctl.service
63ms 773us dev-mqueue.mount
60ms 100us var-tmp.mount
59ms 797us systemd-user-sessions.service
56ms 847us dev-hugepages.mount
50ms 242us systemd-logind.service
50ms 139us sys-kernel-config.mount
46ms 682us systemd-remount-fs.service
42ms 955us systemd-journal-flush.service
36ms 900us udisks2.service
36ms 807us systemd-udevd.service
18ms 279us upower.service
16ms 458us rtkit-daemon.service
1ms 864us systemd-random-seed-load.service -
Satellite L735 taking longer than usual to start-up
My toshiba Satellite L735 was taking longer than usual to startup (more than a minute, usually takes 40 secs) gave it to the service centre, they said they updates the BIOS, optimised processor calculation, formatted it.
It was fine again, but the problem was back in less than a month, took it again, the person at the counter just reduced the unnecessary programs from the boot list, came back home to notice it was taking even longer to startup (more than 2 mins).
When i switch it on, its all fine i get the windows logo in no time, but after that a black screen appears and stays for about a minute and a half, then the homescreen appears, the windows startup sound thats supposed to play as soon as the homescreen appears plays about 40 secs aftr the homescreen has appeared.
Please help.
Thank you.Hi
The notebook seems to load the windows slowly because too many processes would be loaded at the beginning.
First of all I recommend downloading and installing the CCLeaner. This freeware tool would help you to clean the registry and to remove the garbage from the system.
Furthermore you should check your processes which would be loaded at the beginning.
Start msconfig and go to StartUp tab. Here you can disable no necessary and not important processes.
I dont know how many computer experience you have so be careful with that.
If you dont know exactly what the single process does, google for more details.
Removing a mark near the process will disable this you can enable this later too
Furthermore I would recommend checking your antivirus software I switched from Norton Antivirus to Avira Antivir software because it much faster and does not need a lot of hardware resources the Avira antivir is freeware software so you can install and use it for free.
Last but not least defragment the HDD to ensure faster data access
Good luck -
My mac pro 13 takes longer than normal to start?
My mac pro 13 takes longer than normal to start. What do I need to do to speed up the start up process?
with "normal" are you comparing it to other MacBooks? or to your model in the past?
installing a SSD would increase the boot up time a lot if you don't have one already...
also check what apps you have set to automatically open on startup because some/a lot will slow the startup down -
"Connecting to the network is taking longer than usual" message after I wake my computer from sleep
Connecting wirelessly after waking computer from sleep yields the message "connecting to the network is taking longer than usual". This only occurs after sleep, it also does not allow it to autoconnect like when starting the computer up. All
drivers seem to be up to date and happens at more than one wireless location, home and school. I have a windows 7 opperating system.I just had the same problem with my HP Pavilion dv6 laptop.
I was able to resolve the problem by uninstalling my Intel Centrino Wireless Network adapter (but I did not delete the driver). I did this by right-clicking My Computer, Manage, Device Manager, expanded the Network Adapters group, and right-click the
Wireless Network Adapter and click Uninstall. I recommend that you reboot once this is done.
My laptop now connects to Wifi immediately after waking the laptop from sleep.
This is what finally resolved my problem. Sony Vaio with 64bit Windows 7. Wireless would sometimes take up to 3 minutes after Windows started to connect. After following these instructions, I first removed all wireless networks, then from the System Control
Panel I deleted (along with the driver) the Wireless Adapter. I then installed a fresh driver directly from the maker (not OEM).
I now connect to Wifi immediately after booting or waking from hibernation.
Thank you
Emmitt<abbr
class="affil" style="border:0px;font-style:inherit;font-family:inherit;margin:0px;outline:0px;padding:0px;display:inline-block;vertical-align:top;color:#000000;"></abbr> -
I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.
Ignore. I figured it out:)
-
Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrongWhat backups do you have?
-
I went to back up my iPhone4 and it said there was an update. So I clicked on 'update and backup' (or something close to that.) It took FOREVER...way longer than usual. When it was done, it showed the power cord w/an arrow to iTunes. ***??? I restarted my computer and tried the whole process again and still...the power cord with an arrow to iTunes. And I know this means I have to go to Apple and get another phone and will lose anything that wasn't backed up. Anyone else have this happen or have a solution so I don't have to do a restore???
Reboot your computer.
Disable your antivirus and firewall.
Connect the phone to a USB port directly on your computer, not to a hub. If your computer is not a laptop and has ports on both front and back use a port on the back.
If iTunes does not recognize the phone when you connect it see: http://support.apple.com/kb/HT1808
If it STILL doesn't work open a command window and type:
netsh winsock reset
Then try again. (It seems that a recent Microsoft Windows update may have corrupted network settings; this restores them to the factory default).
BTW, was there an error number associated with the failed update? -
Importing mpgs takes longer than it should
Importing mpgs takes longer than it should. I import 2 hr mpgs on a 6core 32gig ram machine & it takes too long. cs5.52
Wow. Sounds like a nice machine Steve. How long does a 2hr mpg take to import?
I just tested it out, and for me it takes about 5 min. ...which, in my opinion, is still too long, and should take no longer than it does to import something into PPro.
I understand your frustration there.
I think I mentioned before that Encore uses mp2 DVD files best. If you import things as mp2 or the DVD m2v file format, there is virtually no import time, and you do not have to transcode everything.
That said, unless there are things going on under the hood that I don't know/understand, I still agree that importing video files to timelines in Encore should take no longer than importing into Premiere. We don't need Encore to author or transcode until we're ready to export. -
SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad. I feel as if Microsoft has taken charge of the Apple Software Division.
Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product. I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse. Right now, it "feels" like they don't care about existing customers. I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD 2, give us the option of going back to IOS 7. I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat. By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model. Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products. Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace. I'm done... -
recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?
johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/ -
Locking entities takes longer than consolidation
Why would locking/unlocking our entity tree take longer than a consolidation?
HFM 11.1.2.1There really isn't anything you can do about it from an application perspective. Make sure when you lock that no other processes are taking place so you're not competing for CPU and RAM with a currently running data load or consolidation. Make sure you have good hardware both on the HFM app server and the database server (I'll avoid a rant here about poorly configured virtual environments...). From a process perspective, try to design a process where users responsible for the base entities lock their own entities so you're never exposed to locking all of them yourself.
Some customers are very happy to use third party utilities such as Amosca's EPM Maestro to automate this, among other tasks. It won't speed up the actual lock, but it will make it easier for you to get the work done.
--Chris -
Password Reset Emails take longer than 6 hours to arrive, expired once they finally show up
HelloI have searched the boards and found instances of people with the same problem, but no solutions. I have been going back and forth with skype support, but all they send me are canned responses with the same useless instructions over and over..... and despite my requests to read and actually reply, or to elevate my questions to a supervisor, all I get are canned responses over and over again. The bottom line is my wife forgot her skype password, we attempt to request a password reset token be sent, said token takes longer than the 6 hours validity period to arrive and is useless by the time we get it, then we are prompted to enter her email for another reset token, which takes more than 6 hours to arrive, completing this ridiculous circle... Advise, ideas, help are all greatly appreciated Thanks
Bad news.I spent the last 4 days going back and forth due to the same issue. The email arrives after 3 hours (should we consider an improvement?) but at the time I check the email, the token is expired so I need to re-initiate the process. Very annoying and not up to today's industry standards for password recovery. Even banks take 10 minutes the most... Bottom line, Skype says this is an issue they recently expereienced. Based on the previous post, the term RECENTLY is very vague.
Maybe you are looking for
-
Colors in pdf files changed when I open those files in the iPad.
I usually use iPad and Goodreader for reading journal articles. There is one big problem reading the papers using iPad because colors in pdf files looks abnormal. When I use my labtop and desktop, I can see whole colors in the pdf files, so I can see
-
Hi Guys I have 10 stock of material A in 001 Storage location ,which all the quantity is serial number managed I have transfered 10 quantity of Material A to 002 location from 001 location using 311 MIGO But serial numbers are not copied to 002 locat
-
I redeemed my code but there was an error. I need a new code for Macos x Developer download of 10.8
i need new Mountain Lion Codes.
-
Hi friend, I have a problem :- When I send my output to word for Report its format in number figure gets changed. I have to use New Times Roman Font. Regards and waiting early reply. ss rawat
-
How can one search SmartForms for a particular text or string?
Hello fellow SAP developers, Our client has a need to search for a particular string in all of our Smart Forms and SAPScripts. For SAPScripts I was able to write a simple Z-Program using function module u201CREAD_FORMu201D to accomplish this. Howev