Startup/wake up issues
Since I got this computer the issue has been getting worse:
1-When I turn the computer on, I always hear the cd drive check for startup disk, but often the process stops there. I have to start the computer a couple of times to finally finish the process.
2- When I put the computer to sleep, I can wake it up after a minute or so, but can not bring it out of a black screen after ten. I hear the cd check for a disc, but that is all.
I have tried repairing permissions. The person who sold me the mac checked and says it is fine. What should I do?
Caveat Emptor! (Buyer Beware). Contact the eBay seller and complain. There's always an eBay avenue of complaint if you don't get satisfaction from the seller. Also Paypal complaints are taken very seriously.
Similar Messages
-
I am having inconsistent monitor wake up issues. If the CPU is on and past the bios boot and THEN I turn on the monitor all works properly. However, the monitor will NOT come out of power save / hibernation mode. I have tried different monitors with the same behavior and am on my second ATI 9600 Pro 128MB graphic card. I have installed the latest Catalyst drivers (4.0) and flashed the MoBo bios (amibos 3.31a) and still no change in the effect. I am suspect that it is some bios setting but can't figure out what the issues are. As a side note, I have had twice in about 40 boots an error: "Dram timing is too tightly so reload timing". The DRAM timing configuration is enabled by SPD at 3-3-3-8-8 (unchangeable in current mode).
Suggestions greatly appreciated!
SYSTEM:
P4 2.8GHz w/ 800M and 512K
2 DDR 256 / DDR400 CL3 PC3200 (Kingston)
ATI Radeon 9600 Pro 128MB
MSI 865PE Neo2-PLS
Viewsonic E90f 19" monitor
Windows XP Pro SP1.1aYou can set your DDR timings manually by disabling SPD in BIOS. Before you do that, be aware of the exact description of your memory sticks and try to find out in Kingston Website about possible timing values.
About the problems with the Monitor, in BIOS you should have a menu 'Power Management Features'. If you have
ACPI Standby State choose 'Auto'
Re-Call VGA BIOS at S3 resuming choose 'Disabled'
Power Management/APM choose ' Enabled'
Suspend Time Out 'Disabled'
On this menu if you have a Submenu 'Set Monitor Events', get in, and if you have something like
FDC/LPT/COM Ports choose 'Monitor'
Primary Master IDE 'Monitor'
Primary Slave 'Ignore'
Secondary Master IDE 'Monitor'
Secondary Slave IDE 'Ignore' -
MBP Retina sleep/wake up issue
Hi
im expiriencing an wake up issue with my macbook.
Sometimes if i plug in the powersupply during the macbook is closed and I open the mac book afterwards the screen stays black.
Havent tried till now to get in remotly .
Below I have attached parts of the logs.
Anyone else with similar symptomes ?
Thx
extract from the logs:
29.08.12 00:15:10,000 kernel[0]: hibernate image path: /var/vm/sleepimage
29.08.12 00:15:10,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
29.08.12 00:15:10,000 kernel[0]: sizeof(IOHibernateImageHeader) == 512
29.08.12 00:15:10,000 kernel[0]: kern_open_file_for_direct_io(0) took 1 ms
29.08.12 00:15:10,000 kernel[0]: Opened file /var/vm/sleepimage, size 17179869184, partition base 0x0, maxio 400000 ssd 1
29.08.12 00:15:10,000 kernel[0]: hibernate image major 1, minor 0, blocksize 512, pollers 4
29.08.12 00:15:10,731 airportd[1329]: _doAutoJoin: Already associated to “nogo”. Bailing on auto-join.
29.08.12 00:15:13,000 kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
29.08.12 00:15:13,000 kernel[0]: macx_swapon SUCCESS
29.08.12 00:15:13,000 kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
29.08.12 00:15:13,000 kernel[0]: macx_swapon SUCCESS
29.08.12 00:15:15,000 kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
29.08.12 00:15:15,000 kernel[0]: macx_swapon SUCCESS
29.08.12 00:15:18,000 kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
29.08.12 00:15:18,000 kernel[0]: macx_swapon SUCCESS
29.08.12 00:15:25,000 kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
29.08.12 00:15:25,000 kernel[0]: macx_swapon SUCCESS
29.08.12 00:15:38,000 kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
29.08.12 00:15:38,000 kernel[0]: macx_swapon SUCCESS
29.08.12 07:01:17,000 bootlog[0]: BOOT_TIME 1346216477 0
extract from pmset -g logs
Time stamp
Domain
Message
Duration
Delay
==========
======
=======
========
=====
UUID: 53DAB416-2C72-44AE-B1C3-790A51007C97
28.08.12 23:05:01 MESZ Sleep
Clamshell Sleep Sleep: Using BATT (Charge:38%)
4207 secs
28.08.12 23:05:01 MESZ Assertions
PID 85(apsd) Released ApplePushServiceTask "com.apple.apsd-waitingformessages-push.apple.com" 00:36:14 id:0xc00000158 Aggregate:0x40
28.08.12 23:05:02 MESZ WakeRequests
Clients requested wake events: None
29.08.12 00:15:08 MESZ DarkWake
DarkWake due to EC.SleepTimer: Using BATT (Charge:38%)
1 secs
29.08.12 00:15:08 MESZ SlowResponse
PMConnection: Response from com.apple.SoftwareUpdate.UserNotification.PMConnection is slow (powercaps:0x19)
392 ms
29.08.12 00:15:08 MESZ SlowResponse
PMConnection: Response from com.apple.SoftwareUpdate.UserNotification.PMConnection is slow (powercaps:0x19)
393 ms
29.08.12 00:15:09 MESZ SlowResponse
PMConnection: Response from PowerStateTracker is slow (powercaps:0x19)
1167 ms
29.08.12 00:15:09 MESZ Sleep
Maintenance Sleep Sleep: Using BATT (Charge:38%)
29.08.12 00:15:10 MESZ SlowResponse
PMConnection: Response from AirPort configd plug-in is slow (powercaps:0x0)
1258 ms
29.08.12 00:15:10 MESZ WakeRequests
Clients requested wake events: None
29.08.12 00:15:14 MESZ Assertions
PID 1333(backupd-helper) Created BackgroundTask "backupd-helper" 00:00:06 id:0xc00000295 Aggregate:0x40
29.08.12 00:15:29 MESZ Assertions
PID 1333(backupd-helper) Released BackgroundTask "backupd-helper" 00:00:20 id:0xc00000295 Aggregate:0x40
29.08.12 07:01:24 MESZ Assertions
Summary- Aggregate:0x40 Using AC
Sleep/Wakes since boot:2 Dark Wake Count in this sleep cycle:1Changing to the SSD wouldn't void the warranty. Here's something you might want to try. Put the SSD in an external enclosure and see if it runs fine from there. If it does, you probably have a bad SATA cable which is what connects the drive to the motherboard.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1398261464&sr=8-3&keywords=2.5+enclosure -
Magic Trackpad / iMac wake up issue.
Hello,
Does anyone know of a fix for the following Magic Trackpad / iMac wake up issue please?
Basically hooked up a Magic Trackpad that was bought several months ago now and found that it works great however the 'click' functionality does not work whilst waking up my iMac. The cursor moves as it should however it's not possible to click onto either a registered account nor guest account in order to enter a password to wake-up from screensaver.
To get around this I've had to pair-up my Magic Mouse again which is not ideal.
A fix for this would be appreciated.
OS installed: OSX 10.7.5.
Thank you.Just my .02, but why do you want a screen save? I was told a long time ago by some engineers not to have your screen saver running. Just non essential. Me, I have none of our computers doing so. They time out and sleep in between, so the hard drives and logic boards power down, if not shut down completely.
As for you situation, I had the same problem a while back and believed it was one or more of the apps. in the back ground. Could even be the UPS. Either re load your OS to check any corruption. And/or, check your login list of apps. and finder to see what is running without your knowledge or in the background, then closing out of open programs one by one prior to the screen saver engaging and see if it changes things. -
Wake Up Issues, Screen Glitches
Having wake-up issues with iMac. Seems like the screensaver is causing problems. Either I get a black screen, or some graphic glitches appear throughout screen. Or the dock will sometimes lock up. Thanks.
Hello cdurs0
Welcome to Apple Discussions
ScreenSaver's use lots of ram and processor resources, if your iMac only has the stock 1 or 2GB of ram you would do better to set the Screen Saver to Never, the display to sleep after 10 or 15 minutes and or use an Active Screen Corner to Sleep Display.
see > http://www.tiptrickmod.com/mac/mac-osx-active-corners/
To check ram go to: About this Mac > More Info > Memory or open your Activity Monitor and check to see how much Free ram you have during normal usage.
see > http://support.apple.com/kb/HT1342
The other alternative to getting the most out of your iMac is to upgrade it to the maximum amount of ram.
see > http://eshop.macsales.com/shop/apple/memory/iMac
Lastly, how full is your Hard Drive? That could also be a problem if there is not enough room for the OS X to work around in.
Dennis -
MacBook Pro Startup and Display Issues
I've been having some random problems with my MacBook Pro (2.16 GHz, 2 GB RAM, 100 GB 7200 rpm hard drive, ATI Radeon X1600 graphics). Specifically:
1. Lines across the screen and purple boxes sometimes appear.
2. The graphic effects (e.g. zooming a window) sometimes get "frozen" on the screen. In other words a remnant from the animation will stay until the window is refreshed.
3. The Mac sometimes freezes during the startup process. Sometimes the login screen will be unresponsive and other times the Mac will almost bootup but fail when loading startup items.
4. Less frequently the Mac will freeze randomly. I previously had iStat Menus installed and each time the MacBook Pro froze up it indicated both read and write disk activities.
Yesterday I decided to wipe the machine clean and start from scratch in case there were a software issue or corruption on the hard drive that was causing my woes. I completely erased my hard drive and even zeroed the entire disk to make sure everything was completely wiped out. I also disconnected all peripherals to simplify things as much as possible.
The first time I tried the reinstall everything completed successfully but the "Welcome" movie froze part way through. I then had problems running the install again. I was able to boot off the Leopard DVD, but the machine froze a couple of clicks into the install procedure. After numerous tries I was able to erase the hard drive once again and install Leopard. This completed successfully and I installed all updates.
The problems started to show up again almost immediately, however. I installed iLife and iWork and all the updates and had the computer freeze up on me again during a reboot. I also noticed that the display issues started to show up again even before installing any third-party software.
I've tried running disk tests with Drive Genius 2.1, but no errors have been reported. I've also used the freeware Rember program to run memory tests but have yet to see any errors. Sometimes my Mac powers up without any problems and once it's powered up it often stays running for days. The display issues appear quite frequently. I've using iStat Menus to keep an eye on the temperature sensors and everything appears to be normal - so it doesn't appear to be temperature related.
Fortunately the computer's still covered under the extended AppleCare warranty, but I would like to have some idea what's going on before I take it in just in case they're not able to reproduce the issues.
Any suggestions and insights would be GREATLY appreciated. Thanks in advance for reading my rather long-winded message.
Cheers,
TimI took my MacBook Pro in for repair and it turned out to be an issue with the logic board. I had the logic board replaced (fortunately it was covered under my extended AppleCare warranty) and these problems are a thing of the past.
-
Startup and Sleep Issues 2.2 GHz, 10.6.6
First, the specs: 2.2 GHz Macbook Pro, 4Gb installed memory. Currently running OSX 10.6.6.
Symptoms:
1: On startup, wait time from grey "Apple" loading screen to blue pre-login window screen is approx 2 minutes, then approx. 8 additional minutes for the login window to appear.
2: If computer goes to sleep, it is unable to wake (put into sleep mode via closing, shortcut form apple menu, and optcmdejct). Instead screen remains black and front status light goes to a solidly lit but dimmed more than usual.
What I've tried:
Full archive and install of 10.6, repair permissions, repair disk (from 10.6 install book disk utility), hardware test (short and extended from original OS disk), Single user fsck, PRAM and SMC resets. Still nothing. I've looked at logs and removed any application that seemed to be hanging up at startup. I'm totally lost on this, and am now unfortunatly past apple care by about 4 months. Any advice at all would be VERY VERY APPRECIATED! I'll post my most recent startup log below.
-Colin
LOG:
3/13/11 8:58:39 PM com.apple.launchd[1] * launchd[1] has started up. *
3/13/11 8:59:08 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:08.707 sw_vers[65:903] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
3/13/11 8:59:09 PM org.apache.httpd[31] httpd: Could not reliably determine the server's fully qualified domain name, using colin-mac.local for ServerName
3/13/11 8:59:10 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 9 seconds
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:14.889 prlclientapp[67:1a03] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
3/13/11 8:59:20 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 9 seconds
3/13/11 8:59:21 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:21.702 prlnetstart[131:903] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
3/13/11 8:59:23 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] Configuring en4...
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] No System Preferences changes required.
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] Configuring en5...
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] No System Preferences changes required.
3/13/11 9:00:14 PM com.apple.WindowServer[93] Sun Mar 13 21:00:14 colin-mac.local WindowServer[93] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/13/11 9:00:26 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 8 seconds
3/13/11 9:08:35 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds
3/13/11 9:08:40 PM com.apple.UserEventAgent-LoginWindow[180] ALF error: cannot find useragent 1102
3/13/11 9:08:40 PM com.apple.UserEventAgent-LoginWindow[180] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 9:08:40 PM com.apple.launchd[1] (com.wacom.wacomtablet[184]) Exited with exit code: 255
3/13/11 9:08:40 PM com.apple.launchd.peruser.502[199] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:50 PM com.apple.launchd.peruser.502[199] (com.apple.Kerberos.renew.plist[222]) Exited with exit code: 1
3/13/11 9:08:57 PM apsd-ft[240] APS daemon launched
3/13/11 9:08:58 PM apsd-ft[240] Successfully got client identity
3/13/11 9:09:08 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 9:09:09 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 9:09:09 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 9:09:10 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 9:09:10 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 9:09:14 PM apsd-ft[240] <APSCourier: 0x106731a70>: Received connected response OK
3/13/11 9:09:43 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
3/13/11 9:09:44 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 4 seconds
3/13/11 9:09:44 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 4 seconds
3/13/11 9:09:52 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 6 seconds
3/13/11 9:09:52 PM com.apple.launchd[1] (0x101804850.mach_init.VersionCueCS2Daemon[320]) Exited with exit code: 1
3/13/11 9:10:12 PM osascript[333] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
3/13/11 9:10:20 PM com.apple.fontd[209] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)Gave it a shot, no luck. Thanks for the info. Here's the log directly after I restarted after trying the above fix. I added a line to show the startup obviously:
3/13/11 11:02:27 PM kernel npvhash=4095
3/13/11 11:02:27 PM kernel PAE enabled
3/13/11 11:02:27 PM kernel 64 bit mode enabled
3/13/11 11:02:27 PM kernel Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
3/13/11 11:02:27 PM kernel vmpagebootstrap: 1021192 free pages and 19192 wired pages
3/13/11 11:02:27 PM kernel standard timeslicing quantum is 10000 us
3/13/11 11:02:27 PM kernel migtable_maxdispl = 73
3/13/11 11:02:27 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
3/13/11 11:02:27 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
3/13/11 11:02:27 PM kernel calling mpopolicyinit for Quarantine
3/13/11 11:02:27 PM kernel Security policy loaded: Quarantine policy (Quarantine)
3/13/11 11:02:27 PM kernel calling mpopolicyinit for Sandbox
3/13/11 11:02:27 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
3/13/11 11:02:27 PM kernel calling mpopolicyinit for TMSafetyNet
3/13/11 11:02:27 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
3/13/11 11:02:27 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
3/13/11 11:02:27 PM kernel The Regents of the University of California. All rights reserved.
3/13/11 11:02:27 PM kernel MAC Framework successfully initialized
3/13/11 11:02:27 PM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
3/13/11 11:02:27 PM kernel IOAPIC: Version 0x20 Vectors 64:87
3/13/11 11:02:27 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
3/13/11 11:02:27 PM kernel Sleep failure codAppleIntelCPe UPowerManagement: initialization complete
3/13/11 11:02:27 PM kernel 0x00002000 0x14000000
3/13/11 11:02:27 PM kernel mbinit: done (64 MB memory set for mbuf pool)
3/13/11 11:02:27 PM kernel rooting via boot-uuid from /chosen: B2D6BDBB-4CD1-3327-BEF8-6BADB8B110E0
3/13/11 11:02:27 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
3/13/11 11:02:27 PM kernel com.apple.AppleFSCompressionTypeZlib kmod start
3/13/11 11:02:27 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
3/13/11 11:02:27 PM kernel AppleIntelCPUPowerManagementClient: ready
3/13/11 11:02:27 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHW2120BH Media/IOGUIDPartitionScheme/Customer@2
3/13/11 11:02:27 PM kernel BSD root: disk0s2, major 14, minor 2
3/13/11 11:02:27 PM kernel jnl: unknown-dev: replay_journal: from: 15467520 to: 1031680 (joffset 0x7d01000)
3/13/11 11:02:27 PM kernel [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
3/13/11 11:02:27 PM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001cb3fffe815b4e; max speed s100.
3/13/11 11:02:27 PM kernel [Bluetooth::CSRHIDTransition] transition complete.
3/13/11 11:02:27 PM kernel jnl: unknown-dev: journal replay done.
3/13/11 11:02:27 PM kernel CSRUSBBluetoothHCIController::setupHardware super returned 0
3/13/11 11:02:27 PM kernel hfs: Removed 28 orphaned / unlinked files and 0 directories
~~~~~~~~~~~~~~~~~~STARTUP~~~~~~~~~~~~~~~~~~
3/13/11 11:02:15 PM com.apple.launchd[1] * launchd[1] has started up. *
3/13/11 11:02:27 PM DirectoryService[11] Improper shutdown detected
3/13/11 11:02:29 PM kernel systemShutdown false
3/13/11 11:02:30 PM blued[17] Apple Bluetooth daemon started
3/13/11 11:02:43 PM mDNSResponder[18] mDNSResponder mDNSResponder-258.14 (Nov 18 2010 14:18:32) starting
3/13/11 11:02:43 PM com.apple.SecurityServer[23] Session 0x5fbff962 created
3/13/11 11:02:43 PM com.apple.SecurityServer[23] Entering service
3/13/11 11:02:44 PM configd[14] network configuration changed.
3/13/11 11:02:44 PM configd[14] setting hostname to "colin-mac.local"
3/13/11 11:02:44 PM mDNSResponder[18] Adding registration domain colinsheridan.members.mac.com.
3/13/11 11:02:45 PM blued[17] writeExtendedInquiryResponse returned 26
3/13/11 11:02:45 PM blued[17] writeExtendedInquiryResponse returned 44
3/13/11 11:02:46 PM kernel Previous Shutdown Cause: 3
3/13/11 11:02:46 PM configd[14] network configuration changed.
3/13/11 11:02:46 PM awacsd[26] Starting awacsd connectivity-32 $Rev: 907 $ (Nov 6 2010 15:06:27)
3/13/11 11:02:46 PM awacsd[26] Connecting AWACS client: colinsheridan hello.connectivity.me.com
3/13/11 11:02:47 PM kernel Atheros: mac 12.2 phy 8.1 radio 12.0
3/13/11 11:02:47 PM kernel NVDANV50HAL loaded and registered.
3/13/11 11:02:47 PM com.apple.kextd[10] Can't load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/Kensingt onMouseDriverX1.kext - no code for running kernel's architecture.
3/13/11 11:02:47 PM com.apple.kextd[10] Failed to load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/Kensingt onMouseDriverX1.kext - (libkern/kext) requested architecture/executable not found.
3/13/11 11:02:47 PM com.apple.kextd[10] Load com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 failed; removing personalities.
3/13/11 11:02:48 PM kernel Alesis Firewire CJ - 3.0.81.1080 - Jan 21 2008 16:04:46 - (c) Singing Electrons Inc. 2004-2007
3/13/11 11:02:48 PM kernel DSMOS has arrived
3/13/11 11:02:48 PM kernel AirPort_AthrFusion21: Ethernet address 00:1c:b3:b3:1b:8e
3/13/11 11:02:48 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
3/13/11 11:02:48 PM kernel RBIOKitController: started.
3/13/11 11:02:48 PM kernel AirPort: Link Down on en1. Reason 1 (Unspecified).
3/13/11 11:02:48 PM com.apple.kextd[10] Can't load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/VirtualM ouseX1.kext - no code for running kernel's architecture.
3/13/11 11:02:48 PM com.apple.kextd[10] Failed to load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/VirtualM ouseX1.kext - (libkern/kext) requested architecture/executable not found.
3/13/11 11:02:48 PM com.apple.kextd[10] Load com.kensington.mouseworks.driver.VirtualMouseX1 failed; removing personalities.
3/13/11 11:02:48 PM kernel en1: 802.11d country code set to 'US'.
3/13/11 11:02:48 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
3/13/11 11:02:48 PM configd[14] network configuration changed.
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:02:50 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[44] Login Window Application Started
3/13/11 11:02:50 PM fseventsd[48] event logs in /.fseventsd out of sync with volume. destroying old logs. (3095 38 3198)
3/13/11 11:02:50 PM kernel AirPort: Link Up on en1
3/13/11 11:02:50 PM fseventsd[48] log dir: /.fseventsd getting new uuid: EE8CCE38-A733-4A68-9F6C-99D1501E3EBE
3/13/11 11:02:50 PM com.apple.usbmuxd[35] usbmuxd-211 built on Jan 13 2011 at 04:20:21 on Jan 13 2011 at 04:20:21, running 64 bit
3/13/11 11:02:52 PM org.apache.httpd[31] httpd: Could not reliably determine the server's fully qualified domain name, using colin-mac.local for ServerName
3/13/11 11:02:52 PM Parallels[89] Loading kernel extension prl_hypervisor.kext
3/13/11 11:02:53 PM kernel AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
3/13/11 11:02:53 PM kernel AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
3/13/11 11:02:54 PM configd[14] network configuration changed.
3/13/11 11:02:54 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 6 seconds
3/13/11 11:02:55 PM kernel yukon: Ethernet address 00:1b:63:98:39:54
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:58 PM kernel utunctlconnect: creating interface utun0
3/13/11 11:03:00 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 10 seconds
3/13/11 11:03:02 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 8 seconds
3/13/11 11:03:02 PM Parallels[103] Loading kernel extension prlhidhook.kext
3/13/11 11:03:02 PM Parallels[109] Loading kernel extension prlusbconnect.kext
3/13/11 11:03:02 PM Parallels[114] Trying to load kernel extensions, exit status: 0
3/13/11 11:03:02 PM Parallels[117] Starting Parallels networking...
3/13/11 11:03:02 PM Parallels[120] Loading kernel extension prl_netbridge.kext
3/13/11 11:03:03 PM kernel /drv/ HypApic.c:234 Host APIC phy 0xFEE00000 lin 0x559a2000 ver 0x14
3/13/11 11:03:03 PM kernel /drv/ HypRealCpu.c:189 hypRealCpusInfoInit: STATUS_SUCCESS
3/13/11 11:03:03 PM kernel /drv/ HypLowCache.c:158 Low cache initialized (3904 kB for 8 VMs on 4096 MB)
3/13/11 11:03:03 PM kernel /drv/ HypModule.c:178 Parallels IPI irq = 0 ipi = 0(0x0)
3/13/11 11:03:03 PM kernel /drv/ HypModule.c:181 Parallels Hypervisor 4.0.3848.450204 loaded.
3/13/11 11:03:03 PM kernel /prl_hid/ Parallels HID Helper started.
3/13/11 11:03:04 PM Parallels[125] Loading kernel extension prl_vnic.kext
3/13/11 11:03:04 PM kernel com.parallels.kext.prlnet 4.0.3848.450204 has started.
3/13/11 11:03:05 PM kernel com.parallels.kext.vnic 4.0.3848.450204 has started.
3/13/11 11:03:05 PM kernel comparallels_kext_prl_vnic_device0: Ethernet address 00:1c:42:00:00:08
3/13/11 11:03:05 PM kernel comparallels_kext_prl_vnic_device1: Ethernet address 00:1c:42:00:00:09
3/13/11 11:03:06 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
3/13/11 11:03:06 PM prl_naptd[138] Starting Parallels Network Daemon
3/13/11 11:03:06 PM prl_naptd[138] en4: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
3/13/11 11:03:06 PM prl_naptd[138] en5: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
3/13/11 11:03:06 PM configd[14] network configuration changed.
3/13/11 11:03:06 PM configd[14] network configuration changed.
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] Configuring en4...
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] No System Preferences changes required.
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] Configuring en5...
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] No System Preferences changes required.
3/13/11 11:03:07 PM Parallels[139] Parallels networking sucessfully started
3/13/11 11:03:08 PM Parallels[142] Restarting CiscoVPN
3/13/11 11:03:08 PM SystemStarter[144] Unknown service: CiscoVPN
3/13/11 11:03:08 PM Parallels[147] Starting Parallels Dispatcher Service
3/13/11 11:03:08 PM Parallels[151] Parallels Dispatcher Server sucessfully started
3/13/11 11:03:09 PM kernel utunctlconnect: creating interface utun0
3/13/11 11:03:28 PM configd[14] InterfaceNamer: timed out waiting for IOKit to quiesce
3/13/11 11:03:28 PM configd[14] InterfaceNamer: Busy services :
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1 [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0 [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3 [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI/IOFireWireController [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI/IOFireWireController/IOFireWireLocalNode [2]
3/13/11 11:03:55 PM WindowServer[88] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/13/11 11:03:55 PM com.apple.WindowServer[88] Sun Mar 13 23:03:55 colin-mac.local WindowServer[88] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/13/11 11:03:59 PM com.apple.SecurityServer[23] Session 0x22e923 created
3/13/11 11:03:59 PM com.apple.SecurityServer[23] Session 0x22e923 attributes 0x30
3/13/11 11:04:03 PM loginwindow[44] Login Window Started Security Agent
3/13/11 11:04:06 PM SecurityAgent[177] Showing Login Window
3/13/11 11:07:56 PM /usr/libexec/hidd[47] Timeout waiting for IOKit to be quiet
3/13/11 11:11:56 PM WindowServer[88] Timeout waiting for IOKit to be quiet
3/13/11 11:12:01 PM SecurityAgent[177] User info context values set for colinsheridan
3/13/11 11:12:02 PM authorizationhost[175] Failed to authenticate user <colinsheridan> (tDirStatus: -14090).
3/13/11 11:12:04 PM SecurityAgent[177] User info context values set for colinsheridan
3/13/11 11:12:05 PM SecurityAgent[177] Login Window Showing Progress
3/13/11 11:12:05 PM SecurityAgent[177] Login Window done
3/13/11 11:12:05 PM loginwindow[44] Login Window - Returned from Security Agent
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] VCEnvironmentSetCWD() failed to set CWD to '/Applications/Adobe Version Cue CS2' <2>
3/13/11 11:13:22 PM com.apple.launchd[1] (0x10041e2a0.mach_init.VersionCueCS2Daemon[313]) Exited with exit code: 1
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] VCEnvironmentSetCWD() failed to set CWD to '/Applications/Adobe Version Cue CS2' <2>
3/13/11 11:13:22 PM com.apple.launchd[1] (0x10041e2a0.mach_init.VersionCueCS2Daemon[313]) Exited with exit code: 1
3/13/11 11:13:29 PM osascript[320] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console -
Slow startup and password issue.
Hi all...
Happy new year...!
As a little christmas present for myself I purchased a Crucial M4 256GB SSD for my MacPro 4,1 (2.26GHz, 22GB RAM, 10.8.2). I'm a semi-pro photographer and wanted a bit of a speed up for my processing etc etc. So yesterday I cloned my existing system drive to the SSD with Carbon Copy Cloner. I then installed the SSD in the spare superdrive bay (my other 4 bays are used).
Just as a background my previous startup/shutdown times on this machine where quite slow averaging around 90s for startup and around 45s for shutdown. I had assumed that this was normal and was just a slow syetm HD issue. When I changed the startup disk to the new SSD and booted up the startup time did decrease but not significantly... its now exactly 59s whilst the shutdown times go down to around 30s. In use the speed of the OS is massively improved with applications and local file copying blazingly fast. I've a few friends who upgraded MacBook Pro's and others macs with SSD's and their startups are around 10-15 seconds....!!! I'm not overly bothered by the slow startups/shutdowns but I am curious as to what might be causing these delays. In testing today I deleted everything unecessary from my user account startup items, disabled various apps and checked the /library/startupitems for anything that shoudnt be there. After a couple of hours trying I cant find anything that is effecting the startups and am lost. I'll likely just accept it and move on as in use the SSD is impressive but if anyone has any ideas it'd be appreciated!
A second thing that has happened is that whenever I try to delete/modify/move an app I am now asked to type in my user password. I have tried repairing permissions, checking the permissions of my .Trash folder etc etc but as of yet nothing has worked. Any ideas...??
Many thanks and Happy New Year yet again.
RichieThe traditional way an Operating System deals with "deleted" files is to remove ONLY the Directory information and simply add the data blocks to the free pool. Those "deleted" data blocks are not cleared.
This works in rotating drives because:
1. The logical block size is the same or larger than the physical drive block size.
2. Rotating magnetic media are block-for-block re-writable.
In SSDs physical blocks are much larger "superblocks", and re-writing a portion of a superblock is a slow and difficult read-modify-write operation. In addition, since the OS did not notify the drive what data are no longer needed, deleted data continue to be carefully maintained and re-written by the drive. Soon every write operation becomes a read-modify-write, and performance deteriorates.
In my opinion, this nearly-full condition is likley to cause drive failure. Something more than wishful thinking is required.
Apple enables TRIM on the drives they install directly. They do not do so for third-party drives, but that is likely because those drives have not been tested by Apple.
I have been using a very small SSD as a boot drive for a while, and periodically consolidate free space followed immediately by erasing free space with a third-party utility. I believe this has kept me out of trouble. My son has been using SSD in his laptop and doing nothing for maintenece, and he has killed two drives in a year.
Trim Enabler utility from groths seems to be working, and makes things simple. Your mileage may vary.
if I notice significant performance slips
You added a much lower latency drive and startup times did not improve significantly. Much of the time required for startup is needed for memory testing. The rest is largely attributable to disk Read/Write times. What more evidence do you need? -
I'm about ready to kill this thing. For some reason that I have yet to discover, my t500 will periodically fail to come to life when I open it. I open it, and it just sits there - the screen does not come on, and no combination of keystrokes seems to wake it up. Every time, I have to hold down the power button and restart it to get it to do anything.
A connected issue seems to be that it does not hibernate, if I am using the right term, when I close it down. I'll notice that when I get home from work, for instance, it has been running in my bag, is warm and the fan has been running to cool it off. The little moon LED is off when I get it out, but when I open the cover, nothing.
Any ideas? I'm on the move with this thing all the time- it happens a couple times a day, sometimes.This can happen if windows gets stuck in the process of sleeping and or hibernating. However, I have not noticed this happening since installing the latest power manager and bios updates, I would start there. Also, if you are leaving any devices like a wireless mouse dongle attached (which I do) if the mouse is left on it can wake it up continually. This also would be true if you have bluetooth enabled and have it either searching for devices to pair or are carring a device which is turned on which can wake the system.
Just a few things to check.. you may want to go through your power settings and make sure you do not have any conflicting settings configured which may cause it not to hibernate properly.
Best of luck!
stheemka wrote:
I'm about ready to kill this thing. For some reason that I have yet to discover, my t500 will periodically fail to come to life when I open it. I open it, and it just sits there - the screen does not come on, and no combination of keystrokes seems to wake it up. Every time, I have to hold down the power button and restart it to get it to do anything.
A connected issue seems to be that it does not hibernate, if I am using the right term, when I close it down. I'll notice that when I get home from work, for instance, it has been running in my bag, is warm and the fan has been running to cool it off. The little moon LED is off when I get it out, but when I open the cover, nothing.
Any ideas? I'm on the move with this thing all the time- it happens a couple times a day, sometimes.
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52 -
I have a refurbished Mac Pro 2.8GHz Quad-Core Intel Xeon .
I have had a problem with it sometimes booting up and the screen either is just black or it is all a grey snow . It will do this sometimes when it comes out of sleep as well . If I have a program running and I leave it on and return after say an hour , and the screen is black and I wake it up it is less likely to restart with any screen problems . I have had one where I got the window telling me to push the start button until it shuts down and then restart it ; which is what I have been doing for every event . After that I got the message about sending a report to Apple , and I did . Any thoughts ? Is it serious ? I have gotten to the point where I am probably going to contact Apple .
BryanI did lots of Google/print research for all that I added . The Apogee Duet is sold right on the Apple site as are M-Audio midi controller keyboards . The only other things that I have hooked up are the KRK Rokit 8s and I read reports on many forums about using them with a Mac and no issues , and my monitor from Samsung . The store where I bought it uses the very same monitor model for there Apple shelf display with no issues . I even phoned Apple before I bought this screen .
That just seems crazy that Apple would sell something on their site that is not compatible with their own product .
The screen issue is very intermittent , in fact it has not happened since my first posting of the issue so assuming that my peripherals are not the issue any other guesses or suggestions as to what might cause the screen to behave like I have stated ?
Bryan
Message was edited by: Bry52 -
IPhone 5 sleep/wake button issue.
I got my iPhone 5 from Italy the launch day of the device in Europe. I have been using it now for 3 month and it is doing great. But i've been facing an issue that is really annoying. When i am using the phone or want to lock it or vice versa, the sleep/wake button does not do it's job from the first time i need to keep pressing it twice or 3 times for it to lock or unlock the device, this doesn't happen all the time but it happen more than 50 times during the day! I posted my problem on blogs and discussion forums and it wasn't only me who is facing this problem, i found 11 different people who have the same problem and they all went to the Genius bar and changed their phones with new ones. My problem is that i live in Egypt and i do not have an Apple store over here or a genius bar! But the good news is that i am travelling to Paris in a couple of hours and i was asking if they will be able to change my device with a new one over there or not.
PS: This device was locked to a carrier in Italy and i had to pay it's full price that was around 900 euros for the 64GB unlocked version and the guys at the carrier store were really good and they did that for me and it's now unlocked and works on every network i have here in Egypt.You can use perfect virtual button, to increase the longevity of yours. Tap Settings App > General > Accessibiltiy > Assistive Touch > ON > tap new small white screen button > Device > Lock. You can even use this to turn the iPhone OFF. To turn ON connect iPhone to power ie charger or USB of computer. The France Genius could be very nice and help you, Good Luck.
-
I have noticed that the Password Screen is not very robust. I have had numerous times where the phone doesn't bring up the keyboard or the screen comes up black when being "woken up".
I have now noticed that when I am on a long call - speakerphone or using a wired earpiece, that the phone will no longer "wake up". I cannot get to the password screen and the phone is basically unuseable and I need to reboot the phone.
One time this happened where my counterparty had to switch phones and called back immediately. I could not answer his call. I had to do a battery pull. The second time this happened I could at least use the power button to restart the phone.
The password screen seems to cause me quite a few issues.
I would like to know if others are experiencing the same thing.
Best regards,
ctfishi believe the same thing happened to be. i was thinking that maybe it had to do with the password screen as well but it's weird how it's worked fine for over a month and then BAM.
this morning i wasn't even on a phone call and i looked to wake up my device by swiping up and there is no response. i can't wake it up from the top button either. i can see the red notification light blinking and i can hear when i get emails but i can't do anything. now i'm going to have to just reboot it. holding the top button shows the power off/restart screen. that's about all i can get to. i think i'll try a battery pull this time. -
New MBP = Goofy Display Wake + Keyboard Issues???
I would like to know if anyone has had the time to try a new MBP out to see if the new Intel Chipset helps with any of the issues that the last MBP's have.
Mainly, if the new chipset fixes some of the wake issues that people have been having, or the keyboard issues where the first character is missed when typing.
Has anyone had a chance to test this out yet?
(I realize that I am jumping the gun a little, but I am really curious)Do the new (Feb 2008) Macbook Pro models have embedded numeric keypads, along with home/end/page (up/down) arrow-key labels? Have the numeric keypads and arrow-labels been removed, as has recently happened to the Macbook line? Apple's "Design" page for the Feb. 2008 Pro doesn't give a clear answer -- it has some photos of Pro keyboards that include an embedded keypad and home/end/page (up,down) labels, but also includes several photos of Pro keyboards without these.
If the embedded keypad is indeed gone: _poor move, Apple_.
PLEASE put this back on the Pro machines, and soon!
Here's why: Actual "pros" (e.g. advanced tech- oriented users) are much more likely to require the numeric keypad for a range of uses, both in much OS X software (from advanced image and video software to Apple's own keypad mouse control) plus in the Boot Camp world of PC software including non-intuitive PC-style 3-digit alt-character entry. Heck, embedded keypad could have even then been pointed to as a newly differentiating feature of the Macbook Pro line.
There can of course be some software remedy -- but hardware change is the only way to really restore to easiest use, getting the symbols on the keyboard caps. Users should not be expected to memorize these; the embedded keypad may go unused by a user for a straight year, but then need to use OS X or PC software for which the numeric keypad is the only way to perform certain functions.
Apple: can you
1) Put back numeric keypad and arrow-key labels -
Hey, I'm trying to install Virtual PC on my Powerbook (1.33 GHz, Tiger) but I'm having some issues. I got it working once, but I fuddled something up so I had to reinstall it, but when I go to reinstall it, I have to restart the computer after the initial installation, but it won't open after restarting, and a box pops up saying /Library/StartupItems does not have the proper security. I select the fix option and it reboots, and I go to install Virtual PC again, but I run into the same problem when I reboot. Any suggestions?
I tried with sp6. Still the problem persists!!
Radha
"Radha Srinivasan" <[email protected]> wrote:
>
Hi all,
I am using Weblogic 5.1 SP5.
I have a java class which uses DBPool to talk to a database with credentials set using Context. It works fine when run as a separate java class. Weblogic allocates threads and program works fine.
But if I use the same java class as a startup class weblogic tries to use guests credentials instead of one I have set in context and the program fails. ( I have disabled guests in weblogic properties - that is how I want it to be!). Why does weblogic not use the credentials I have set in context in startup class?
Thanks
Radha -
Suspend to ram -- wake up issue
I got my computer to go to sleep ok when I shut the lid but it's having some issues waking up. When it wakes up I can get back to X and type some commands but something is not right and I can't pinpoint it. For instance the terminal window will freeze on issuing a ping command. The most obvious sign something is amiss is when I try to edit the suspend to ram script I have. I get this message:
E325: ATTENTION
Found a swap file by the name "/usr/sbin/.susp2ram.swp"
owned by: root dated: Wed Jun 1 19:08:08 2005
file name: /usr/sbin/susp2ram
modified: no
user name: root host name: spycamera
process ID: 4021
While opening file "/usr/sbin/susp2ram"
dated: Wed Jun 1 19:21:28 2005
NEWER than swap file!
(1) Another program may be editing the same file.
If this is the case, be careful not to end up with two
different instances of the same file when making changes.
Quit, or continue with caution.
(2) An edit session for this file crashed.
If this is the case, use ":recover" or "vim -r /usr/sbin/susp2ram"
to recover the changes (see ":help recovery").
If you did this already, delete the swap file "/usr/sbin/.susp2ram.swp"
to avoid this message.
Swap file "/usr/sbin/.susp2ram.swp" already exists!
[O]pen Read-Only, (E)dit anyway, (R)ecover, (Q)uit, (A)bort, (D)elete it:
Something must be amiss somewhere but I don't know where... Here is the script:
#!/bin/bash
# Suspen-to-RAM script for IBM x41 and Arch Linux
# --------Suspend ----------
# Stop networking
/etc/rc.d/network stop
# Unload network drivers
modprobe -r ieee802111_crypt
modprobe -r ieee80211
modprobe -r ipw2200
modprobe -r tg3
# Suspend to RAM
echo mem > /sys/power/state
# --------Resume -----------
# Reset the hard disk, otherwise it is not accessible
hdparm -y /dev/sda
# Configure the drive (32-bit IO, UDMA,umaskirq)
#hdparm -c3 -d1 -u1 /dev/sda
#Switch virutal terminal to wake graphics up
chvt 1
chvt 7
# Start Networking
modprobe tg3
modprobe ipw2200
modprobe ieee80211
modprobe ieee80211_crypt
/etc/rc.d/network start
exit 0
Note that I know I'm using /dev/sda -- I don't have a /dev/hda on my laptop for some reason. (Thinkpad X41) Also, the second hdparm line is disabled on purpose since those commands aren't supported by the sda drive.The following is from rc.sysinit, I think you need to do something similar in your script:
stat_busy "Configuring System Clock"
if [ "$HARDWARECLOCK" = "UTC" ]; then
/sbin/hwclock --utc --hctosys
else
/sbin/hwclock --localtime --hctosys
fi
if [ ! -f /var/lib/hwclock/adjtime ]; then
echo "0.0 0 0.0" > /var/lib/hwclock/adjtime
fi
if [ "$TIMEZONE" != "" ]; then
/bin/ln -sf /usr/share/zoneinfo/$TIMEZONE /etc/localtime
fi
stat_done
Maybe you are looking for
-
E72_SIM Card register fail problem
Dear All I just buy nokia E73 about 1 week. It has a problem with my phone ,It push a message to notify that SIM card register fail. Since I use my phone 1 week , it notify every day that I solve it by turn off phone and turn on again after that it
-
Sent messages and inbox messages all appearing in same list
Hi there Please can anyone tell me how I can separate out my sent messages from my inbox messages? Currently when I go to "Messages" from the home screen it takes me to a list of all messages, both sent and received, altogether. I've not had this wit
-
Hello Every Body, I am using apex 4.2 Release 2 and i want to migrate to Apex 4.2.3 ; the oracle doc said that if have apex version 4.2 i should install only the patch of apex 4.2.3 but id dont know if this patch wil migrate the version on my apex (
-
Displaying alv as output on the same selection screen
Hi Gurus, Happy new Year!! .I have got a requirement in which I have to pass three fields i.e. Matnr (as range) , Storage location (as Range) and Plant (as Parameter). The result is to display these three fields and the storage Bin displ
-
Error registering the Plugin in OIm 11g
HI All, I am receiving the following error while registering the plugin in OIM11g [oracle@orclfmw plugin_utility]$ ant -f pluginregistration.xml register Buildfile: pluginregistration.xml register: [echo] [echo] **************************************