Stateless Session_Bean Container_Managed does not commit SQLJ updates in 8i 8.1.7

I deployed an EJB Stateless and Container_Managed into 8i 8.1.7.
The bean contains a method with a simple SQLJ insert statement and works fine, except for no commit is triggered by the Bean Container when method call is finished.
I can see that the insert was done, because the counter for my table is increased!
So the fault has to be that there is no commit!
Why does the Bean Container not commit, as it states in the EJB Online Documentation??

Is it NT or solaris 8.1.7 ?
On solaris it should have worked. On NT it wouldn't work, unless you explicitly lookup
the datasource and do a ds.getConnection(), the container doesn't know what to commit. In general, hereafter, the bean code needs to explicitly lookup datasources and call getConnection() on the datasource so that the datasource is enlisted. Using the default kprb connection isn't going to work unless you explicitly set default-enlist tag to true in the XML deployment descriptor.

Similar Messages

  • Process does not perform an update.

    I have this PL/SQL process in my page:
    UPDATE tag_order
    SET order_date = SYSDATE
    WHERE order_number = :P16_Order_Number;
    COMMIT;
    Unfortunately, it does not perform the update. What could be wrong?
    FYI: In order to get to the page where this process is located, you first go to a page that contains an Interactive Report region (Page 15). When you click on one of the rows in that report region, page 16 is loaded and the :P16_Order_Number item is loaded with the order number from the report page. I'm not sure if that has anything to do with the problem, but I mention it because :P16_Order_Number is referenced in the update statement. Could it be that its session state is not set?
    Any advice would be appreciated. Thanks.

    Thanks for your responses. Your answer seems perfectly logical, unfortunately, it did not work.
    I made a copy of P16_Order_Number and called it P16_Order_Number_Visible and made it a 'Display as Text'.
    Then I changed P16_Order_Number to 'Hidden' The report was already set up to set P16_Order_Number to Order_Number, so nothing had to be changed there, or in the Process that referenced P16_Order_Number, since it is now referencing the Hidden item.
    But when I ran it, loaded page 16 and clicked Session, P16_Order_Number had the correct value 172, but P16_Order_Number_Visible had no value, even though its Source has been set to P16_Order_Number and the value 172 was actually displayed from P16_Order_Number_Visible on page 16.
    Furthermore, the update did not work. So what is wrong here?
    Thanks.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

    Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

    The update to iOS 5.0 & higher is an erase/restore deal, so make sure you follow the directions here to update your phone:
    http://support.apple.com/kb/ht4972
    iOS 7.0.4 will be installed.

  • HT4623 how can i update my iphone 4 that does not have the update option in the settings?

    How can i update my iphone 4 that does not have the update option in the settings?

    From the article you linked, scroll down to the section "Update your device using iTunes"

  • HT4972 How come my iPad does not have software update in the settings?

    Help, my iPad does not have software update available in settings, how do I update?

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972

  • ITunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

    Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

    Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

  • Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

    Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
    How/Where to increase the relationship count?
    The message which I can see :
    Warning:
    This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
    Thanks

    This really brings up a larger topic around change management.
    The questions you should start with is
    1. What kind of change is happening to the raw material? 
    2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
    3. Who needs to approve this change?
    If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession.   Get Latest Revision will automatically switch out the material with the latest approved version.  This logic is also configurable in case you need to add additional guard conditions.   We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
    If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification.  Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur.   Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks. 
    Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes.  We can also schedule a change management training session for everyone where we can share our vision and tools available for change management.  This topic is quite large and generally requires a lot of business process discussion beyond just the tools available. 
    Thanks
    Kelly

  • IPhoto does not start to update after my iMac was updated to OS X Yosemite.

    iPhoto has been "paused" after my iMac was updated to OS X Yosemite. iPhoto does not start to update when I click "UPDATE" in App Store "Updates". The circle on the left top corner just keep circling. Do you know how to fix this problem? I cannot download my photos to iPhoto without updating it.

    Thank you LarryHN,
    I could not follow what you have explained to me as I struggled to find iPhoto 9.6. Anyway, while I was struggling, I managed to update iPhoto somehow. Finally, I can use iPhoto!
    Thank you very much for your quick response.
    Tama Chan

  • HT4906 I updated to IPhoto 11 but iCloud still  does not recognize the update

    I updated to Iphoto 11 but iCloud still  does not recognize the update?   Why?

    What version of iPhoto do you have?  9.2.2 or newer is needed
    What verison of IOS on your mobile devices?
    LN

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • HT4623 how about updating an older ipod which does not offer "software update" as a choice when one taps on General under Settings?

    how about updating an older ipod which does not offer "software update" as a choice when one taps on General under Settings?

    http://support.apple.com/kb/HT4972
    Unless you have a 2nd generation iPod Touch, in which case 4.2.1 is the highest possible.

  • Why Software Updater does not install some updates automatically?

    QuestionWhy Software Updater does not install some updates automatically?
    AnswerSoftware Updater only installs security-related updates automatically. Non-security-related updates, and service packs installation are required to be initiated manually via the Software updates tab under the Policy Manager Console.
    In Policy Manager 12, a checkbox Show non-security-related updates has been introduced under the Policy Manager Console > Software tab. Unchecking the checkbox hides the following update types:
    Microsoft security tools
    Non-security updates
    Service packs
    Note: This checkbox is Policy Manager Console-specific setting. If you change the setting in one Policy Manager Console, it would not affect another Policy Manager Console connected to the same Policy Manager Server.

    amrok90 wrote:
    Updater does not detects 5800. I've reinstalled everything as it's stated (as, according to FAQ, sometimes the drivers may get corrupt). Restarted the PC. Nothing happened. 
    Presumably FOTA not an option for your 5800XM?
    Happy to have helped forum with a Support Ratio = 42.5

Maybe you are looking for

  • Append text for the item in sales order

    Hi all, I have to append a text in a sales order for every line item created and am using save_text Fm for that. The issue is, When a text exists already for a line item, then iam unable to append new text to the existing text as it doesn't get saved

  • Not all files not showing within Preferences folder

    Hi, I encountered a strange problem with my Preferences folder in the User Library. As I am moving from one machine to another I need to copy some preferences files. The files exist when you search for them in the Finder. As it seems though only pref

  • Problem related to deletion of parked invoice?

    Hi All, I have parked two  same invoices against a po and released one among them and now I want to delete the other one as it's of no use for me.  Now When I try to delete the invoice it is showing Message "Invoice document 5105634579 cannot be proc

  • Can I deauthorize a computer I know longer have from someone elses computer?  They have an itunes account on their computer.

    I no longer have a computer, but do have an iphone.  I need to deauthorize the computer I no long have. Can I deauthorize the computer from my iphone? Can I deauthorize the computer I know longer have from a friends computer who has an itunes account

  • Lightroom Serial Number not Valid

    A while ago I downloaded Lightroom and was using it with no problem.  Accidentally, I uninstalled the program from my mac.  Now, when I try to reinstall it, I get a red "X" whenever I enter my serial number. Because of this, I'm not able to proceed w