Statement could not be reached

does anyone know what "statement could not be reached means"
thanks

does anyone know what "statement could not be reached
means"
thankseasy: for example,
return;
moreCodeHere(); // this cannot be reached because of the unconditional return above it

Similar Messages

My phone keeps saying Activation server could not be reached or activation request could not be completed. What do i do?

I restored phone, and it still doesnt show any settings,aps etc, and it started like it was going to let me set it up, went thru English, United states, then Wifi, entered wifi info and then it says please wait while we activate and then it goes back to saying can not activate or activation server could not be reached, the diagnostics i run on it while synced with the computer comes back fine that it detects phone,etc. What can i do now?

YOu should ask your family friend. The message you get about activation server being unvailable usually indicates a hacked or jailbroken phone.
only the carrier that the phone is locked to can unlock the phone.

HT1925 My ipod is not showing up when I have itunes up. I was told to remove itunes and reinstall however. I receive a message with unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-

can someone please advise on what I should do? unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-4953-92FA-624BDF5D 85AB) VEIFY THAT YOU HAVE SUFFICIENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL, Which i did . I contacted the apple support and they could not help. has anyone gotten this error? Did some research some results show that this has occurred during updates on the itunes but has not seen how to successfully uninstall without getting this error. I attempted to use the control panel and uninstall but it provides me with the same error all the time. I NEED SOME Answers on this issue. Can you please help?!

Perhaps try the fixit from the following Microsoft web page. (Try the "problems uninstalling" option.)
Fix problems with programs that can't be installed or uninstalled

Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

E-mail server could not be reached when system was trying to send message

Hi All,
I have done the settings for mail transport. The same worked fine on development and QA. However, on production, the same settings do not seem to be working I receive message 'The e-mail server could not be reached when the system was trying to send the message', when mail is being sent out.
The settings is as follows:
1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.
2. Create System Alias by going to
System Administration à System Configuration à System Landscape
Go to content area.
Portal Content à Content Provided By SAP à Collaboration and right click.
Select New from PAR à System.
Choose the iview com.sap.netweaver.coll.app.gw and hit next button. Select Java_Mail option and hit next button. Enter appropriate System Name and ID and hit next button. Hit finsh button and open object for editing.
Select System Aliases from display option and add an alias for the system. Save changes.
3. Create Mail Transport by going to
System Administration à System Configuration à Knowledge Management à Collaboration.
   Click Groupware Transports in content area.
   Select Mail Transport on next screen.
   Click New button and create new mail transport definition.
   Give SMTP server being used in organisation, Inbox for Sent messages folder, and give
   system alias created in step 2 as alias.
4. Mail channel server too has been set up.
Thanks and regards,
Arun

Dear All,
I am trying to setup my SMTP mail in WAS7.0 SP4, my motto is to use this setting to send mail out from CAF GP (Approval Form).
I have given SMTP setting at
System Administration à System Configuration à Collaboration à Groupware Transports
System Administration à Universal Worklist & Workflow à workflow à Mail
Please tell me am in the correct part of configuration of mail or is that any other place to set configurations?
As our friend (Arun) mentioned in his first thread to activate Mailing Service, i couldnt see this setting in my WAS7.0.
+1. Activate Mailing Service by going to
System Administration à System Configuration à Knowledge Management à Content Management à Mailing Service.
Ensure Active check box is selected.+
Is there any other settings i am missing?
The error my CAF GP giving is "The system failed to send an e-mail notification to "
Your help is highly Applauded
Thanks! in advance.
Regards,
Kishore

BEA-141151 The admin server could not be reached at ...

I have been at this for 3 days now... I created a new ManagedServer, but I'm not able to make it connect to the Admin server.
The Admin server is running and listening on port 5306. I can connect to the Admin Console (web).
I can also connect to the Admin server via WLST, using this command: connect('operator','operator01','t3://localhost:5306')
However, when I try to run the managed server from a script, it does not see the Admin server. This is the command I run:
java -Dweblogic.Name=ManSer1 -Dweblogic.management.server=t3://localhost:5306 -Dweblogic.RootDirectory=<path to my domain> weblogic.Server
This is the error I get:
<BEA-141151> <The admin server could not be reached at http://localhost:5306.>
I believe it's trying to connect using "http", because I've never actually connected in the past. Here is a website explaining this: http://download.oracle.com/docs/cd/E17904_01/web.1111/e13749/weblogicserver.htm#i1031832
Note: Regardless of which protocol you specify, the initial download of a Managed Server's configuration is over HTTP or HTTPS. After the RMI subsystem initializes, the server instance can use the T3 or T3S protocol.
I'm not sure what else to try... Firewalls are not in play, since this is traffic moving around on the local machine. I'm running on SunOS. Weblogic is version 9.2 MP3.
Appreciate any help.

Is the NodeManager , AdminServer running ?The NodeManager is not running. Is it required?
Also, I haven't closed the command prompt.
I noticed the issue when I tried to deploy my project. Connected to Localhost/7001 but in the deploy project window, I dont see any soa_server instance
running. Also, in the console the soa_server status is shutdown.

Administration Server could not be reached

I have installed WebLogic 12c on a WinXP machine and configured a domain in development mode. Apart from the admin server there is only one managed server ms1.
By using the startup scripts I am successfully able to start both AdminServer and ms1 and access the console.
Then I enabled SSL ports on both AdminServer & ms1, enabled the domain Administration port, and overrode Local Administration Port for ms1.
The different port values are:
Administration Port = 9002
AdminServer (Listen Port = 7001, SSL Listen Port = 7002, Local Administration Port Override = 9002)
ms1 (Listen Port = 7011, SSL Listen Port = 7012, Local Administration Port Override = 9012)
Then I am able to start AdminServer from startWebLogic and it duly shows:
<Notice> <Server> <BEA-002613> <Channel "DefaultAdministration" is now listening on 127.0.0.1:9002 for protocols admin, ldaps, https.>
Also able to access the console at this point.
However then when I try to start ms1 using startManagedWebLogic.cmd ms1 https://127.0.0.1:9002 it is not able to connect to the admin server:
<Emergency> <Management> <BEA-141151> <The Administration Server could not be reached at https://127.0.0.1:9002.>
<Info> <Configuration Management> <BEA-150018> <This server is being started in Managed Server independence mode in the absence of the Administration Server.>
As mentioned before I am able to access the console from https://localhost:9002/console and netstat output shows:
TCP 127.0.0.1:9002 0.0.0.0:0 LISTENING
TCP 127.0.0.1:9002 127.0.0.1:3040 ESTABLISHED
TCP 127.0.0.1:9002 127.0.0.1:3042 ESTABLISHED
What could be the reason that while starting up ms1 is not able to connect to AdminServer on 9002? But all is fine when the administration port is not enabled.
Any help on this is much appreciated. Thanks!

Hello,
The problem still persists. I even tried changing a few of the port values and also the administration protocol to https from t3s but they didn't help.
This is how the config.xml looks now:
<server>
<name>AdminServer</name>
<ssl>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>7004</listen-port>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
</ssl>
<listen-port>7003</listen-port>
<listen-address>127.0.0.1</listen-address>
<administration-port>9003</administration-port>
</server>
<server>
<name>ms1</name>
<ssl>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>7012</listen-port>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
</ssl>
<machine xsi:nil="true"></machine>
<listen-port>7011</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address>127.0.0.1</listen-address>
<administration-port>9012</administration-port>
</server>
<administration-port-enabled>true</administration-port-enabled>
<administration-port>9003</administration-port>
<configuration-version>12.1.1.0</configuration-version>
<admin-server-name>AdminServer</admin-server-name>
<administration-protocol>https</administration-protocol>

E-mail server could not be reached Error in Collaboration

Hi All,
I was trying to implement the collaboration feature - Send Email. I have configured email transport and have done the user mapping. When i click send email - it is throwing me the error
"E-mail server could not be reached, when system was trying to send the message"
The email service is active. The email channel is configured and the server is restarted.
Even the firewall is blocked. What could be the reason. I am able to send and receive mails from msoutook. what other configurations are required?
Please do help!
Thanks,
Divya

Hi Yusuf,
I have done that and still the same.
I have done the http proxy settings in visual admin. also tried blocking the firewall.
Am i missing some configurations?
Please do help in this issue.
Thanks,
Divya

HELP!! When I open Photoshop CS3 it states "Could not initialize Photoshop because you do not have the necessary access privileges".

When I open Photoshop CS3 it states "Could not initialize Photoshop because you do not have the necessary access privileges".
Also, InDesign crashes when trying to open it.
I am running OS X 10.6.8
The most recent task I did was a Mac OS snow leopard software update.
I created a new user account and both Photoshop and InDesign work perfectly when logged into that account, but the problem is persisting with my old account.
I tried, but didn't receive much help from Adobe.
Any help would be appreciated!

I see. Well, if it works on a new account, then I guess that' good enough. You might still wanan try and fix your permissions on zthe otehr account, though. It may just require digging into the terminal and commandline operations to recursively apply this stuff to all folders and sub-folders...
Mylenium

OSS1- partner could not be reached

Hi all,
My SAP-OSS connection test in SM59 is working OK, the download SaPnote via SNOTE is also works well, but calling from OSS1 is always failed : partner 'IP address' could not be reached......
Any suggestion ? Thanks.

Hi
Please ensure you have correct entries (IP Address, syntax) in your 'saproute.ini' under %winnt% directory (or wherever you have this 'saproute.ini' file located) in your SAP system.
for example for below router entry:
[Router]
sapservX=/H/your-SAProuter-internal-IP-address/H/SAPServX-IP-address/H/
Example:
sapserv4=/H/200.10.10.24/H/204.79.199.2/H/
200.10.10.24 is my SAP routeru2019s IP address.
204.79.199.2 is SAPServ4u2019s IP address.
Regards
Sekhar
Edited by: sekhar on Nov 17, 2009 10:16 AM

So i restarted my iPod and it is telling me that the activation server could not be reached! I don't know how to fix it. please help!

So i restarted my iPod and it is telling me that the activation server could not be reached. And I don't know how to fix it. Please help!!

Maybe this is applicable
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
This says the Activation Servers are on-line
http://www.apple.com/support/systemstatus/

Alchemy for xfi - the product state could not be determined (error 6

as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

Known Issue: "DNS server could not be reached" when creating or updating a RemoteApp collection using template images for some locales

When trying to create or update Azure RemoteApp collections that use a template image for some non-EN-US locales, it might fail with error "DNS server could not be reached". You might also see error code "DnsNotReachable".

Cause: There was a issue in Azure in which decimal punctuation was not treated properly if the locale of the template image used a comma (,) instead of a period (.).
Workaround: Before a fix was applied, the workaround was to use template images based on a locale that uses a period to delimit decimals, such as EN-US.
Resolution: As of March 19, 2015, a fix for this issue has been applied to Azure. You should once again be able to create collections from template images that use non-EN-US locales. If you continue to have this problem, please
try the workaround. If that works and the only difference in the template images is the locale, please email remoteappforum (at Microsoft). If the workaround does not work, the issue is likely caused by a DNS configuration issue such as:
No valid forwarders to public DNS servers configured on your internal DNS server(s).
A valid internal DNS server is not specified on your Azure RemoteApp VNet.
A VNet or internal network configuration issue is preventing the internal DNS servers from be reached by the VMs in the RemoteApp collection.

Error in apex report Ora-20001 The printng engine could not be reached

I created a report query. When I test it I got the following error.
Ora-20001 Report engine colud not find the requested url.

hi All,
i want to have Print Option Enabled on my Reports
i did as mentioned in the Document
Configuring Report Printing in a Full Development Environment
To configure the printing of reports in a full development environment:
1. Log in to Oracle Application Express Administration Services. See "Logging in to
Oracle Application Express Administration Services" on page 2-3.
2. Click Manage Service.
3. Under Manage Environment Settings, click Instance Settings.
4. Scroll down to Report Printing:
5. For Oracle BI Publisher, select one of the following:
– Standard Support - This is the default setting. Standard Support enables you
to print report regions and report queries using either the built-in templates
provided with Oracle Application Express or other XSL-FO compatible
formats you provide. This setting does not support RTF (rich text format).
Standard Support provides declarative formatting of report regions and report
queries with basic control over page attributes, including orientation, size,
column heading formats, page header, and page footer.
– Advanced Support - Requires a valid license of Oracle BI Publisher (also
known as Oracle XML Publisher). Advanced Support provides you with all
the capabilities of the Standard setting plus the ability to define RTF-based
report layouts developed using the BI Publisher Word Template Builder.
To learn more about installing and configuring Oracle BI Publisher, see PDF
Printing in Application Express 3.1. See:
6. For Print Server Protocol, select the protocol that the print server uses.
7. For Print Server Host Address, specify the host address of the print server engine.
8. For Print Server Port, define the port of the print server engine. By default, this is
set to 8888 when the report server is installed.
9. For Print Server Script, define the script that is the print server engine. The default
setting is:
/xmlpserver/convert
10. Click Apply Change
After Configuring the Print Option,
i am having Oracle 10g Releae2 on Hp- Unix, and Apex 3.1
i didnt Install Oracle BI publisher
i want to Enable Print Option on my Reports
when i try to give the Print a Report
i am getting the Below Error
<div id="report_7026503216111526_catch"></div><pre>report error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.</pre>
please Help me out
Many thanks

The admin server could not be reached

Dear All,
I have oracle weblogic server running on red hat enterprise Linux, with one managed server. I created a self-signed certificate to access the admin server using SSL connection, after creating the certificate and start running the domain, The admin server run fine, but when i start running the managed server using
$ ./startManagedWebLogic.sh osb_server1 https://server_ip:7006 i got that error, " The admin server could not be reached on https://server_ip:7006
and the managed server running independence of admin server, as well as admin server can not establish jmx:t3 connection with the managed server on its SSL port
also in admin server log i got this error
<Sep 30, 2013 6:51:00 PM EET> <Warning> <JMX> <BEA-149504> <The adminstration server was unable to establish JMX Connectivity with the osb_server1 at the JMX Service URL of service:jmx:t3://172.17.11.13:8011/jndi/weblogic.management.mbeanservers.runtime.>
how can i resolve this error?
thanks in advanced

Hi John,
Thanks. Notable errors in this log are:
Failed to connect.[Root Cause: Connection refused ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Attempting to connect to Native Directory: Retry Count: 10 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Failed to connect to native directory. com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
Any ideas?
Thanks.
Edited by: 960369 on 21-Sep-2012 02:56
Edited by: 960369 on 21-Sep-2012 03:33

Statement could not be reached

Similar Messages

Maybe you are looking for