Statement is not accessible in Exit include
Hi,
I have added code in the exit V05EZZWE (in system ECC 6). When i try to check it, it gives an Error saying "Statement is not accessible" at the beginning of the code. I tried going through some of the related links in the forum, but it is not clear to me why this is happening. Nonetheless, I can still activate the include and the main program.
Can anyone explain this error?
Thanks a lot,
Shivali
Did you already check this SDN - thread?
It looks very similar to your problem.
Re: Statement not accessible
Similar Messages
-
INCLUDE - Statement is not accessible. URGENT.
II am making change to user exit in INCLUDE MV45AFZZ.
I just put an if condition in the INCLUDE ztest_so.
It is giving following ERROR (RED) when I check the syntax.
Include ZTEST_SO
Statement is not accessible.
FORM userexit_move_field_to_vbak.
Include ztest_so
Endform.
*& Include ZTEST_SO
if sy-uname eq 'TRAIN014'
endif.
Please help.You created the include alright. But there is no call to the include (Perform statement) from any program, hence include cannot be accessed.
MV45AFZZ is standard SAP User Exit where all Forms are being called at specified points in standard SAP code.
Iam not sure/not tried but if you create your new Form you will have to modify SAP code to make a call to this FORM, which is not recommended.
The best solution is to use the available Forms and put your code in the one that is being called at the right place for you to be able to use it. -
Compile Error Statement is not accessible
Hi All,
I have report in SAP 4.7 . when i do syntax check on it it give a warning -"statement is not accessible."
But same thing when we compile we are getting as Syntax error in ECC 6.0 .
when I compile it, it prompts
<i><b>Include ZHRIPENR
Statement is not accessible.</b></i>
<i><b>My REPORT program -</b></i>
REPORT ZHRIBANK NO STANDARD PAGE HEADING
LINE-SIZE 80
LINE-COUNT 65.
START-OF-SELECTION.
INCLUDE ZHRIPENR.
END-OF-SELECTION.
<i><b>My INCLUDE program -</b></i>
*INCLUDE ZHRIPENR.
PERFORM BATCH_INIT.
FORM BATCH_INIT.
ENDFORM. " (BATCH_INIT)
when I compile it, it prompts
<i><b>Include ZHRIPENR
Statement is not accessible.</b></i>
Please let me know how can i proceed .
Cheers,
ReddyHi ..
The Reason may be bcoz you are Placing the FORM statements inside the Include.
Just Remove the FORMS from the Include and Place the in ur Main program in the Last.
Note: Subroutine definitions has to be in the end of the code.
REWARD IF HELPFUL. -
Hi Anybody ,
i am getting an error 'Statement is not accessible'
REPORT ZZDEMO_EXPORT.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: lf_formname TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE LIKE SY-SUBRC.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
CHANGING lf_retcode.
IF lf_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = 'ZPRI'(002)
LANGUAGE = 'B'
NAME = '123456'
OBJECT = 'VBBK'
TABLES
LINES = GT_LINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM processing USING proc_screen
CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = lf_formname
IMPORTING
FM_NAME = LF_FM_NAME
EXCEPTIONS NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
i_vbeln = i_vbeln.
ENDFORM. "PROCESSING
How can I solve that problem ?
Thanks & Regards
Ambrish DwivediHi,
I have changed the source code , please check it.It is working fine.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: lf_formname TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE LIKE SY-SUBRC.
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = 'ZPRI'(002)
LANGUAGE = 'B'
NAME = '123456'
OBJECT = 'VBBK'
TABLES
LINES = GT_LINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
CHANGING lf_retcode.
IF lf_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM processing USING proc_screen
CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = lf_formname
IMPORTING
FM_NAME = LF_FM_NAME
EXCEPTIONS NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
i_vbeln = i_vbeln.
ENDFORM. "PROCESSING
Regrads,
Suvajit -
"Statement is not accessible." - Error
Hi,
am working for an ECC upgradation project and am getting the above error "Statement is not accessible." at the below coding.
WS_VBELN = XLIPS-VBELN.
Kindly get me a solution <removed by moderator>
Thanks in adv,
Siva
Edited by: Mike Pokraka on Sep 5, 2008 12:26 PMHi all,
Pls check the code below :
DATA: WS_SPLITTOR(3) TYPE C,
WS_SPLIT(1) TYPE C,
WS_SPLIT1(1) TYPE C,
WS_SPLIT2(1) TYPE C,
WS_SPLIT3(1) TYPE C,
WS_VBELN TYPE LIPS-VBELN,
WS_POSNR TYPE LIPS-POSNR,
WS_NO_OF_LOOP(1) TYPE C,
WS_NO_OF_ITEM(1) TYPE C,
WS_BAL(1) TYPE C,
WS_MODNO(10) TYPE C,
PAR_ID(20) TYPE C.
DECLARATION OF INTERNAL TABLE
DATA: INT_XLIPS LIKE XLIPS OCCURS 0 WITH HEADER LINE,
INT_XLIPS2 LIKE XLIPS OCCURS 0 WITH HEADER LINE.
WS_VBELN = XLIPS-VBELN.
WS_POSNR = XLIPS-POSNR.
MOVE SY-MODNO TO WS_MODNO.
CONCATENATE 'SPLIT' WS_MODNO INTO PAR_ID.
Regs,
Siva -
Enhancement in Module getting the message 'Statement is not accessible.'
Hi All,
I have a requirement in ME11/12/13 Info record. I have to put a check on 'Minimum order quantity' field and throw a message if it is blank. So i tried to create the Implicit enahncement in program SAPMM06I and screen number 102 inside MODULE CHECK_MANDATORY_FIELDS. After endmodule there is a place where we can do the implicit enahcement. i tried to create the same but will activating i am getting an error 'Statement is not accessible.'
Is it because i am writing the implicit enhancement in module pool??? please help me out because i have to display the message at eine-minbm field 'Minimum Quantity'.
thanks in advance
RahulI think a module should be placed in the enhancement and called elsewhere.
Rob -
"Create Object " statement gives error: statement is not accessible
Hi All
U must b doing good.
I am new in ABAP Objects.
I have writeen a simple Class definition n Implimentasion code.
but whenever i write statement "Create object", it gives error.
'm working on SAP Dev 4.7.
the code was like this:-
class counter definition.
public section.
METHODS: set IMPORTING VALUE(set_value) TYPE i,
increment,
get EXPORTING VALUE(get_value) TYPE i.
private section.
DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
count = set_value.
ENDMETHOD.
METHOD increment.
count = count + 1.
ENDMETHOD.
METHOD get.
get_value = count.
ENDMETHOD.
ENDCLASS.
DATA: cnt_1 TYPE REF TO counter.
DATA number TYPE I VALUE 5.
CREATE OBJECT cnt_1 .
CALL METHOD cnt_1->set
EXPORTING set_value = number.
DO 3 TIMES.
CALL METHOD cnt_1->increment.
ENDDO.
CALL METHOD cnt_1->get
IMPORTING get_value = number.
write: number.
its giving error like:-"Statement is not accessible."
plz tell me the way to resolve this error.
thanx n regards
Prashant tiwarihi prashant....
this is the link to post your therads for abap objects:
[ABAP Objects;.
if you want to reward, on the left of every reply ther would be some radio buttons like answere, helpful answer,... so on. click the radio button which suits you. answered closes the thread and other points are displayed there itself.
---regards,
alex b justin -
Statement not accessible error
Hi, we have upgraded the project from 46c to ecc version.
In one standard include MV45AFZZ , one statement is added IMPORT itab1chk FROM MEMORY.
In MV45AFZB , the value for itab1chk is getting exported.
In 46c , we r not getting any error when we run the VA01 transaction.
But in ECC, this transaction going for Dump giving error 'The statement is not accessible ' referring to the statement IMPORT itab1chk FROM MEMORY which is in MV45AFZZ include.
I tried by adding ID <KEY> to the IMPORT AND EXPORT statement. But still getting same error.
Can any one please suggest the solution.
Thanks,
laks.Hi,
You get this Error normally when you are doing a syntax check on the Includes in which the code lines are not between FORM and ENDFORM.
I dont think this is a serious error atleast till 4.7 as the system will allow you to activate the Include. May be the ECC is a bit more stringent on this issue.
I think your problem will be solved if you try to include all the code lines only in the FORM and ENDFORM.
regards,
Mahesh -
Statement not accessible in include called in a user-exit
I am working on an upgrade project, and we receive an error 'Statement not accessible.
In the following user exit:
FUNCTION EXIT_SAPLZLWB_002.
INCLUDE ZZLWBU02 .
ENDFUNCTION.
If I go to the include, I get an the error 'statement not accessible'.
I tried to put all the code in the include between a form...endform statement,
but then I get an incorrect nesting error because the form...endform is between a function...endfunction.
How can I solve this?
Thx!
Edited by: christophe latinne on Jan 9, 2009 4:31 PMthis seems to be a clone of a standard SAP function group, and thats why you can;t access the exits here.
EXIT_SAPLZLWB_002
you can create the exits starting with Z* in order to access those at runtime. -
Statement not accessible - Syntax error
Hi all,
There is a form within a standard include. The form has an include within it. Its a custom include. So its an exit i suppose. Now i have a problem in the custom include. There is "statement not accessible" error. Find below the code in the custom include.
*& Include ZZIMOVEKVGR4 *
DATA: r_vkorg TYPE RANGE OF vkorg.
CONSTANTS: c_z_salesorg_zzkvgr4 TYPE rvari_vnam VALUE
'Z_SALESORG_ZZKVGR4'.
* Get the values from variant Z_SALESORG_ZZKVGR4 of TVARVC tavle
CALL FUNCTION 'Z_FILL_RANGE_TABLE_FROM_TVARV'
EXPORTING
name = c_z_salesorg_zzkvgr4
* INITLINE = ' '
* LINE_SEPARATOR = ','
TABLES
rngtab = r_vkorg.
* Check for the sales orgranisation in TVARVC table
IF vbrk-vkorg IN r_vkorg.
* Move field Customer group 4 to KOMPCV structure
MOVE vbrp
ENDIF.
Please help me understand how to overcome the same. The function module called has a select query. Does it have something to do.
Pasting here the form that calls this include.
FORM USEREXIT_ACCOUNT_PREP_KOMPCV.
* KOMPCV-zzfield = xxxx-zzfield2.
*{ INSERT TSTK9B000H 1
* TSTK9A05ZS-Begin of changes For scr 7060
* Only for the sale organisation S096
INCLUDE ZZIMOVEKVGR4. "TSTK9A05ZS
* TSTK9A05ZS-End of changes
*} INSERT
ENDFORM.
Thanks & Regards,
Selvakumar M.Hi,
this form in RV60AFZZ is to modify KOMPCV fields.
I can't see any attempts to change those fields in your include.
You can either move your code directly into form routine USEREXIT_ACCOUNT_PREP_KOMPCV, or correct your code in your include to make it work (as Sudhi told before).
Regards.
Klaus -
Statement not accessible error in Implicit Enhancement of SAPMPE03
ENDMODULE.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$\SE:(1 ) Include MPMKMO00, End S
*$*$-Start: (1)---------------------------------------------------------------------------------$*$*
ENHANCEMENT 1 ZENH_PE03.
MESSAGE 'hi' TYPE 'I'.
ENDENHANCEMENT.
*$*$-End: (1)
As shown above i added a line MESSAGE 'Hi' Type 'I' in the implicit enhancement portion. But it gives me error "Statement not accessible"
ThanksHi Amber,
just in case you have to do something similar again: ABAP Code must always be between MODULE ... ENDMODULE or FORM ... ENDFORM. In the example in this post the statement
MESSAGE 'hi' TYPE 'I'.
is just after an ENDMODULE. statement and so this code can never be reached (or is not accessible ). The implicit enhancement option outside the existing modularization units is used to define completely new MODULEs or FORMs.
Hope this helps!
Regards
Oliver -
Statement not accessible error - Any ideas please.
Hello all:
We were using macro from TRMAC table in 4.6C version and it used to give a warning but after upgrading to ECC6.0 it is syntax error! Please look at the code below:
*SELECTION SCREN / PARAMETERS *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01.
PARAMETERS: p_mode(1) TYPE c DEFAULT 'N' OBLIGATORY,
p_grp LIKE apqi-groupid DEFAULT 'SKF_POST' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
unix_pc_path text-001 text-002 text-003.
*Intialization *
*INITIALIZATION.
*At selection screen *
AT SELECTION-SCREEN OUTPUT.
PERFORM format_unixpath(yunixctrl) USING 'YHOME_UX' yhome_ux.
AT SELECTION-SCREEN.
IF ( rdb_pc = 'X' AND yhome_pc IS INITIAL ) OR
( rdb_ux = 'X' AND yname_ux IS INITIAL ).
MESSAGE e000 WITH 'A filename is required'.
ENDIF.
AT USER-COMMAND *
AT USER-COMMAND.
*Start-of-selection *
START-OF-SELECTION.
IF NOT rdb_ux IS INITIAL.
unix_getname yhome_ux yname_ux v_file_in.
PERFORM upload_parse_unix_file.
ELSEIF NOT rdb_pc IS INITIAL.
v_file_in = yhome_pc.
PERFORM upload_parse_pc_file.
ENDIF.
PERFORM skf_posting.
*End-of-selection *
END-OF-SELECTION.
The program does not like the line "unix_pc_path text-001 text-002 text-003." and gives an error "Statement not accessible". I went through some discussion forums on this here but nothing related to macro. Could anyone please give me an idea how I could resolve this? All the answers will be rewarded.
Thanks.
MithunYou cannot put it in START-OF-SELECTION a you need the unix path in the
AT SELECTION-SCREEN FOR OUTPUT event.. move the statement from the selection-screen block to the INITIALIZATION event.
~Suresh -
"Statement not accessible" error in Implicit enhancement - SAPMF05A
Hi,
I am trying to implement Implicit Enhancement in program SAPMF05A, in module transaktions_init. When I click on Edit -> Enhancement Option -> Show implicit enhancement, it displays implicit enhancement at end of module ( after ENDMODULE) statement. When I click " Enhancement" icon, write code and it gives error statement not accessible.
Please suggest.
Regards,
PriyaYou will have to put the code in a module and then call that module.
Rob -
Hi all
there is an error for the below statemnt
APPEND 'Techn.Platz' TO it_fieldnames.
" Statement not accessible"
Thanks
ProtyushaHi Protyusha,
It seems that you are trying to append the complete line of a tabel with this 'Techn.Platz' . Instead you provide the field name that you are trying to append
For ex: it_fieldnames-fieldname.
If still you are not clear then send me the complete code I will explain you in detail.
Regards,
Md Ziauddin -
Statement Not Accessible for a FM
Hi i am getting Statement not accessible syntax error at the Call Function Statement,(bold line) for the following code. Can somebody clarify me why this is happening. Thanks in advance.
PROGRAM ZHR_FEATURE_RLPGR .
TABLES : PERNR.
TABLES : T74HG, PSKEY, T5UB3, T5UB9, T5UBT, T5UBA .
infotypes:0001,0021.
CALL FUNCTION 'EXIT_SAPLHRBEN00FEATURE_029'
EXPORTING
_PERNR = PSKEY-PERNR
_BEGDA = PSKEY-BEGDA
_ENDDA = PSKEY-ENDDA
_BAREA = T5UB3-BAREA
_BENGR = T5UBT-BENGR
_BSTAT = T5UB9-BSTAT
_BPLAN = T5UBA-BPLAN
_SUBTY = PSKEY-SUBTY
_OBJPS = PSKEY-OBJPS
IMPORTING
_RLPGR = T74HG-RLPGR
EXCEPTIONS
EVALUATE_FEATURE = 1
CUSTOMER_ERROR = 2
OTHERS = 3Hi,
Try with as below.
CALL FUNCTION 'EXIT_SAPLHRBEN00FEATURE_029'
EXPORTING
_pernr =
_begda =
_endda =
_barea =
_bengr =
_bstat =
_bplan =
_subty =
_objps =
iscobra =
_nontx =
IMPORTING
_RLPGR =
EXCEPTIONS
EVALUATE_FEATURE = 1
CUSTOMER_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Ram.
Maybe you are looking for
-
I want all the users on my iMac to share the same Calendar. How do I do it?
-
Can anyone explain to me, the option Interpolated, in the function , "Scaling and Mapping? Thank you!!!!!
-
Possible to stop a "copying of files" which is in it's third day now?
The file has 216GB in it, a TM stamped bakup. It's taking way too long to copy. Can I stop it in it's tracks without too much damage. Still learning about Unix and terminal. Today the "copy" screen says, "copying 6,166 items," and estimated 216 GB at
-
it dont make sense i have tried downloading many times but it wont let me
-
Dbms_crypto hash for SHA-1
I need to implement Salted SHA {SSHA} passwords by updating LDAP using PL/SQL. These values should be stored in standard Base 64 encoded format. For this I am using DBMS_CRYTO, UTL_ENCODE and DBMS_LDAP. However, I am finding issues with RAW values. S