Static drops in my exported audio

When I play the video in FCP, the music audio is perfect. But every time I export the project, in any format, the song keeps playing with little bursts of statics. Like little tics. I can't figure out how to fix the audio.

I have always just used songs I got on iTunes and they have always been fine. It just really doesn't like this song for some reason.

Similar Messages

Export Audio to movie causes loud static

Hello,
If I import a movie (.mov) file into Logic pro 9, add some extra music tracks and then try to "export audio to movie" to my desktop, when I open the exported file in quicktime player I get horrible static. I am also running Logic in 32bit mode.
Just on accident I found that if I export the file to my SDCH card that i use for my Canon T3i camera and not to my Desktop the file opens fine, I hear the extra tracks I added and the actual audio of the original file.
Can anyone explain why I can't export the file to my desktop without the file opening with static?
Just for a bit more information, I can also export to a jump drive with no problem. Does the the way my hard drive is formatted have anything to do with this feature?
Computer specs:
MacBook Pro
2.4 Ghz Intel Core i7
4 GB 1333 Hz DDR3
Intel HD Graphics 3000 384 MB graphics
750 GB SATA Disk
Jump Drive: MS-DOS (fat32)
SDCH crad: MS-DOS (fats32)
Mac HD: Mac OS Extended (Journaled)
Thanks
Darian

What is really odd is the Jump Drive and Secure Digital card are both formatted Fat32 MS-DOS, while your Mac drive is formatted (correctly) as Mac OS Extended.
Go back to your original formatting... what happens if you move the noisy file from your desktop to the jump drive and play it from there, is there still static, if so that eliminates a playback problem and places it on the record function. Best to narrow things down.
De-Select Floating point and set the sample size to 16, leave everything else the same.

How do I set up my drag and drop questionaire to export to a XML file?

How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and drop rank order response of 1,2,3,4.How do I set
up a XML file that receives the responses.I don't understand how to
do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

Use XML.sendAndLoad.
http://livedocs.macromedia.com/flash/8/main/00002879.html
You will need a server script to receive the XML structure
and it depends on
the server scripting language how you obtain that data. Then
you can either
populate a database or write to a static file or even email
the XML data
received from Flash.
For a basic example, I have two links I use for students in
my Flash
courses:
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLASP/Ex01/XMLASPEchoEx01_D oc.php
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLPHP/EX01/XMLPHPEchoEx01_D oc.php
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"kenpoian" <[email protected]> wrote in
message
news:e5i9hp$cs6$[email protected]..
How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and
drop rank order response of 1,2,3,4.How do I set up a XML
file that receives
the responses.I don't understand how to do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

Exporting Audio to Movie, doesn;t export the audio

When I try Option>Movie>Export Audio to movie It rendereds but doesn't actully put the music into the video. Worked in 7.1 doesn;t work in 7.2.1 any plans on fixing this?

Indeed, thats what I do, but the time saving and
simiplicity of the 'Export audio to movie..."
function puts it at the top of the 'features that
really should work' for us composers to picture!
Hopefully it will be fixed soon with an update.
It's not broken. To be sure I went and tried it myself
and it worked fine. I did not even have to set the
locators, which I thought I would have to. I just dropped
the movie on a project and went to the menu. It did bring
up some dialog box I had not seen before. Something about
adding the tracks to use. It only showed track 1 but since I
could not figure out how to add the tracks I just hit OK and
it rendered all of them. Hope you get yours back up.

Logic 9 "Export Audio to Movie" command

What happened to the "Export Audio to Movie" command that used to be under the file menu? This is something I sorely need back.Trying to import audio into Motion 5 is not working out well - even with rendering set at the lowest settings (same with FCP10). I like to be able to see my results as I'm working, not watch choppy playback and guess where to drop in the audio. I'm running an 8 core Mac Pro with 32 G of RAM and I'm wondering if anyone has used a good work around for this problem. I wish I never updated.

I just used Quicktime Player to open the movie and dragged a bounced down version of my Logic audio on top of it. I "Saved As" and it worked fine!

Fcp won't export audio in sync, fcp won't export audio in sync

Hs anyone any experience with FCP not exporting audio in sync even though the audion and video is in sync on your timeline prior to export, someone suggested that if you have independenytly recorded audio at 44.1KHZ instead of 48K this can cause issues, tried resampling but doesnt sem to make a difference any help would be appreciated

So guys here's how it all turned out. As I couldn't re-record the original source audio wave files, I resorted to opening up the original source wave files which were 44.1k and resample them by opening them in soundtrack pro, process tab, then select resample, this then presents a drop down tab with a range of resampling options, in this case I selected 48k which is what my video is set to.
Surprisingly quickly the source files were re-encoded ( these were around 1 and 1/2 hour each running time)
Then reopened FCP and without having to Re-edit the timeline just offlined the orginal 44.1k files and replaced them by reconnecting media and pointing to new resampled 48k files.
They dropped back in perfectly and on export video and audio were in perfect sync.
Lessons learned - always record the audio which was on a separate field recorder at 48k. - point well made Goldfish
Secondly - thanks to everyone for your helps and hints
Thirdly - in learning we have no failures, we just fall forwards
Best regards,

No audio when exporting audio to movie using DAE

I'm starting to merge my DAE world into Logic and so far so good, until I try to export audio to movie.
The movie bounces out really fast and then there's no audio on it. Is there something special I have to do to bounce audio to movies when using DAE?

can i import it into iMovie and then export to ipod?
Any attempt to import or drop a non-DV file into iMovie will automatically invoke a routine which will convert the source file into a DV file for editing within iMovie. Since QT cannot create separate audio and video tracks for a muxed (combined single audio/video track), you with still end up with a video track and no audio in iMovie.
The normal work flow is to rip the VCD and then convert the muxed program stream into an MPEG1 and then use an MPEG based third party application to convert to an iPod compatible format. Applications like MPEG2 Works 4 ($25)can perform all phases of this operation and I assume (but have not tested) that MPEG StreamClip (free) may also be capable of handling VCD/SVCD sourced programs.

What is the difference between"export audio and "bounce"?

What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob

Unable to remove Static Drop entry | 2960 Cam Table

Hi all,
I am facing a strange issue here on a production switch (Cisco 2960 IOS 12.2(55)SE5)
I have the following entry in my cam table:
switch#show mac add int gi0/10
          Mac Address Table
Vlan    Mac Address       Type        Ports
123    1234.1234.1234 STATIC      Drop
Although this mac-id has not been statically entered in any way it shows up as static and I can't remove it. I tried all possible clear commands without success. As a last step I reset the interface to the default empty config just configuring it as access port in an office vlan.
I am trying to avoid having to reload the switch to clear the related memory as this generates downtime. Has anyone ever faced such an issue and can advise me?
Logs:
switch#show mac add add 1234.1234.1234
          Mac Address Table
Vlan    Mac Address       Type        Ports
123    1234.1234.1234    STATIC      Drop <-- note the "interface"
Total Mac Addresses for this criterion: 1
Current configuration : 47 bytes
interface GigabitEthernet0/10
shutdown
end
switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#int gi0/10
switch(config-if)#sw mod ac
switch(config-if)#sw ac vl 123
switch(config-if)#no sh
switch(config-if)#do sh mac add int gi0/10
          Mac Address Table
Vlan    Mac Address       Type        Ports
123    1234.1234.1234    STATIC      Drop
Total Mac Addresses for this criterion: 1
switch(config)#clear mac address-table static 1234.1234.1234 vlan 123 drop
MAC address could not be removed.
Address is not user configured
switch#clear mac add dynamic address 1234.1234.1234
switch#sh mac add add 1234.1234.1234
          Mac Address Table
Vlan    Mac Address       Type        Ports
123    1234.1234.1234    STATIC      Drop
Total Mac Addresses for this criterion: 1

Hi Umesh,
Of course there is nothing with this mac in the config. That was like the first thing that has been checked. There was dot1x running on this and all the other ports which of course has been disabled and cleared accordingly.
The problem is that there is some sort of cam table holding the Drop entries and although it should the memory is not being freed up when using the commands according to the documentation.
This is definitely a question for an IOS geek or someone who already had a similar issue once. If I open a TAC case they will tell me to reboot so the only hope is really someone who had this issue already once and resolved it without reboot.
Anyone with experience in this?

Media Encoder/After Effects CC 2014 Only Export Audio

I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000

I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000

Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
Alexander

Here are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

Export Audio to Movie - where is that function in Logic 9?

I have noticed that a very useful function in my Logic Pro 8 (version 8.0.2) options/movie/export audio to movie is not found in the Logic 9 version. One of my friends has this version (and an Intel Mac) but I cannot help him working with music and video - I cannot find it anywhere in the Logic 9 menus. Can you help?
Best, Peter Danstrup

I just opened a quicktime movie. Added an audio track, and am looking for the option indicated in the manual: "Choose File > Export Audio to Movie". Upstream it's indicated that this option only appears if a movie is present. My movie is present, but still this option does not appear?
Ideas?
-- Gerry

Export audio to video AAC not working in Logic Pro X

Hi
Anyone else have this.
When I choose to export audio to movie, and select AAC, it exports but when I chack the file, it has actally used PCM.
Regards
Keef

Did you ever manage to get this figured out?

Export Audio Option is Missing

I have a simple project set up - 3 video clips making up the movie, and 2 audio clip - as part of a training/testing.
I need to export the audio (they are mp3 format)
However, when I do File->Export->Audio, I have only the following choices:
Media
Adobe Clip Notes
Title (Greyed out)
Export Tape (greyed out)
Export to EDL
Export to OMF
I am guessing I have something configured incorrectly, but haven't been able to find out what. Any ideas?
Thanks
Kathy
CS4.2
Win7

File->Export->Audio
Curious. I don't have that option. Though I am still using 4.1.0.
Have you tried the standard method of File>Export>Media... and calling up the correct settings there?

Exporting audio with markers button is greyed out.... ANY HELP MUCH APPRECIATED!

Hello
so, background to the story. Now peak pro is defunkt on OSX I am trying to use Audition to create cdmasters. The idea being I will compile the album in audition, export wav files of each track including gaps and compile DDPi master in Sonoris DDP creator. Should be fine but quite a few limitations I've found already in audition.
1)Main question is this. Exporting tracks. I have compiled and added all the markers in to a 30+ track cd. I've exported whole thing to a single mixdown that includes marker but the 'EXPORT AUDIO OF SELECTED RANGE MARKERS TO SEPERATE FILES IS GREYED OUT' even if i select everything....
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
2) & 3) are very annoying when you only want to move one clip by a few frames or seconds.
Any ideas folks ? Like i say uestion 1 is most pressing!
Thanks in advance

thanks guys, all makes sense, really appreciate it.
I will try the merging out. I was in a hurry to get a CDREF out so ended up just exporting the compiled album out as one wav from audition and adding PQ points in Sonoris. Not ideal especially as running order etc is bound to change.
I can't recomened Sonoris DDP creator enough, fantastic program and very reasnably priced. I have Soundblade LE as well but find it too clunky to bother learning, its one of the least intuitive audio programs I've ever come across.
Maybe Audition and Sonoris should team up, if you could add PQ points into audition it could become the best OSX option for compiling cd masters.
Did you have any thoughts on questions 2)&3)
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
Thanks
Dan

Static drops in my exported audio

Similar Messages

Maybe you are looking for