Static during playback of voice recorded through external mic and mixer

I have an external mixer plugged into my USB and sound quality is great playing through mixer (listening through headphones plugged into the mixer) but when I record and playback of through GarageBand I hear lots of static and clicking sounds. I hear the static whether I play through my external speakers or headphones hooked up to my iMac.
I set up a new Real Instrument > Vocals > No Effects
Input: Channel 1
Format: Mono
Monitor: Off
When I use the Cubase software that shipped with the mixer, to record and playback, the sound quality is fine playing through the computer

TotallyLee wrote:
It happens even in a brand new project. I have an empty project apart from 1 track with the mic as an input. No plug ins or anything on it. I've tried the same switching the mic for a guitar with no problem. The guitar sounds perfect while playing and in playback but with the mic I can't hear anything when recording and the volume on the fader is very low so I have to normalise the track to hear the vocals are a good level. I've always done this with no issues but now it seems to be bringing out all these horrible noises. I should add that the vocals themselves are perfectly fine with no distorting, only this strange static sound during gaps in speech. Not sure if that narrows it down at all?
Ok the fact that the volume is very low is something to correct first, because that's not right. That mic requires either Phantom power or two AA batteries to function, do you have that provided? The Mic input gain on the Line-6 Pod is where you raise the recording level.
It might also help if you posted a screen shot of logic's Audio preferences.

Similar Messages

My daughter made a voice recording on her phone and sent it to me through a text message. Can I make that a ringtone for my Iphone?

my daughter made a voice recording on her phone and sent it to me through a text message. Can I make that a ringtone for my Iphone?

I did an internet search (Google) and found the following. It is from May (before the latest iOS update) so the look of some of the steps may vary slightly from the current iOS 7. http://osxdaily.com/2013/03/04/turn-any-voice-recording-into-a-ringtone-for-ipho ne/

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

Audio recording with external mic

Hi,
I have a problem that's become a real issue for me. I record meetings from the end of a conference table and have used a Dell in the past. I have a great little external mic called Sound Grabber. However, when I try to use it on my Mac, the volume quality is not adequate. I feel like the Mac really doesn't recognize the external mic and wants to default to the internal mic all the time, and that doesn't cover a conference room by any means. I've tried other mics and had the same issue, so I'm sure it's not the mic. I've also seen similar complaints from other users, but no one has come up with an explanation or solution.
This function is vital to my job and lack of quality recording forces me back to the Dell every time. Can anyone help me get this figured out so I can stick with the Mac?

MBP = MacBookPro
I use a MicFlex (http://www.mac-pro.com/s.nl/it.A/id.1896/.f $39.95) for most personal voice uses on OSX and an mVox MV100 for desktop conference/group calls (http://www.mvox.com/index.asp?PageAction=VIEWPROD&ProdID=2 $9.99) on my PC (used to be Mac compatible but not since 10.3)

My new macbook air( 761-13", ios 10) suddendy shutdown today during copy of a dvd from external dvdrom. and it does not turn on or start up.what should i do?

my new macbook air( 761-13", ios 10) suddendy shutdown today during copy of a dvd from external dvdrom. and it does not turn on or start up.what should i do?

Hello kanani-2014,
After reviewing your post, I have located an article that can help with your Mac not turning on. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Troubleshooting: My computer won't turn on
Resolution
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How do I get live audio playback through headphones while recording a performance of a song on iMovie through external mic?

Hard to explain but hopefully I can get the question across. If anyone can give me some tips on how this will work it would be greatly appreciated!
I like to perform songs of my own in iMovie and upload them to YouTube. The problem I am running into is when I try to record the song through an external microphone the sound will not playback (while recording) through my headphones. The audio and video do record just fine but I would like to be able to hear through my headphones WHILE I record into my external microphone so I can hear how it sounds as I sing. Is this possible? As I stated before, everything works fine but I cannot hear how I sound WHILE I am recording through my headphones. Thats all I want lol. Thanks!!

Did you ever find the answer to this problem? I have the same issue.
Cheers
DAn

Static during playback with soundfonts

I'm trying to bring a MIDI file into GarageBand and play it back using various soundfonts. However, when I choose "DLS Music Device" as my tone generator and assign a soundfont, I hear a loud hissing and crackling sound during playback. I only hear this when I'm using a soundfont, not with any of GarageBand's internal sounds.
I've tried several soundfonts, most of which I've used successfully in other applications, but none of them will play consistently in GarageBand without the hissing.
Any ideas?
- Tom M.

TotallyLee wrote:
It happens even in a brand new project. I have an empty project apart from 1 track with the mic as an input. No plug ins or anything on it. I've tried the same switching the mic for a guitar with no problem. The guitar sounds perfect while playing and in playback but with the mic I can't hear anything when recording and the volume on the fader is very low so I have to normalise the track to hear the vocals are a good level. I've always done this with no issues but now it seems to be bringing out all these horrible noises. I should add that the vocals themselves are perfectly fine with no distorting, only this strange static sound during gaps in speech. Not sure if that narrows it down at all?
Ok the fact that the volume is very low is something to correct first, because that's not right. That mic requires either Phantom power or two AA batteries to function, do you have that provided? The Mic input gain on the Line-6 Pod is where you raise the recording level.
It might also help if you posted a screen shot of logic's Audio preferences.

Voice recording using external microphone

Hi,
I need to record my voice using an external microphone on my Pavilion 15-n097ea. There is only a combined headphone/mic jack and I have read that I need a 4 conductor connection. I can't seem to find any local shops that sell them and was advised to buy a USB sound card that has the pink and green ports, or a 3.5mm 4 pin to 2x3 headset splitter adapter - M/F. Any suggestions as to whether this will work, and if so can you recommend a headset that will give a good quality voice over, without costing the earth?
My control panel shows this in the sound section:
Mic in at front panel (black)
Realtek High Definition Audio
Not Plugged In
Microphone
Realtek High Definition Audio
Default Device
Stereo Mix
Realtek High Definition Audio
Ready
Many thanks in advance!

There's plenty of software you can use to record your voice to mp3 then just put the mp3 into your fla.

First Gen 5GB: Static during playback

Help! During playback (using original driver) the sound output suddenly became very noisy/fuzzy/staticky. I erased the drive, reset it and loaded updated drivers but no change. Is this now a paperweight?
Thanks!

Hi Clayton,
A couple of ideas: the simplest (but least likely to work) is to look down into the headphone jack to see if you can see the two copper colored contacts. If one appears to be bent in, you could try to very gently ease it out.
The second is to fix the solder on the earphone jack. This is more complicated (but do-able) and seems to be not too uncommon a problem (is yours a second generation iPod, 20Gb?). You can read my other thread about it here;
http://discussions.info.apple.com/webx?128@@.68bbf90d
Let me know if either of these things work for you.
Good luck,
Paul

Recording from external mic while recording music from internal device?

Not sure where to ask this? I'm rather new to MAC. I was under the impression GARAGE BAND would be able to record my vocals from an external mic while playing an audio either from an internal mp3 or CD? I don't see how if so?
I simply wish to record vocals over an instrumental song from mp3 or CD, but I am unsure how to do this on my IMAC? On my old PC, I was able to just use WINAMP to play whatever audio while recording my vocals over it with COOL EDIT? Is there some thing I'm missing here? Can I do this with Garage band or what do I need to get to do this?
Also, I've plugged my external mic in, went into my preferences to set "audio line in" and it doesn't pick up my voice? What am I doing wrong?
Thanks in advance

Hi Wil3,
Best place would be to ask this question in the GarageBand forum which you can find here:
http://discussions.apple.com/forum.jspa?forumID=1120
Kryten

I'm using the note taking view of Word 2011 for Mac so I can record a meeting as well as take notes. The audio of the internal microphone is so low - can I attach an external mic and have it work with note taking view?

Can I attach an external mic to my Macbook Air to enhance sound input for the note taking view of Word 2011 for Mac? I've tried preferences to up the volume of my sound, but I still cannot hear the recording. Any suggestions? I need to record a meeting as well as take notes so I'd like to use this tool, but the audio is not good enough.

A USB microphone can work with the Air, and I've used them before with my 11" Air. Griffin also made a product (the iMic) that will add a standard computer microphone port, connecting to your USB port. It's heyday was the time of the old iBook laptops (which also lacked a microphone in jack) but I think it's still around.
The single sound port on the 2011 models, as I recall, supports iPhone style headphone/microphone but I don't believe it will support a standard microphone input.
The built in microphone sits on the left side of the computer and I suspect wouldn't work well for picking up a lecture unless you were sitting just right in position vs. the speaker (preferably having the speaker positioned to the left and sitting really close). By design most laptop microphones presume they are going to be mainly used to record a sound coming from the person sitting at the keyboard, while for a lecture you normally would prefer it concentrate on sound coming from behind the screen.

When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

Taking Voice Records Off RAZR V3 and onto MBP via BlueTooth, possible?

You can do video, photos and even audio, but voice records don't show up in audio...

Get your bluetooth to recognize the phone. And then I think there's an option to allow you to browse the bluetooth connection and the hardware attached.
I was able to connect to my Motorola V551 (basically the same phone) and upload my address book. Haven't tried pics, but should be just as easy. Try and post the results.

Recording From External Mic

I am trying to record sound from an eternal mic and the Mac does not receive input from this device. I have selected the line-in input in the sound menu. What am I missing?

Having input is one thing. Next you need an application like Audacity that will take your voice input and make it a recording.
http://audacity.sourceforge.net/

Cannot record with external mic pavilion dv970

I get no sound when trying to record using an external mic pluged into the mic jack. I have tested the mic that i'm using on another pc and it works ok. The pc's internal mic can pick up the recording ok as well. help!

You may need to go to Control Panel under Sounds and change the default input from the internal to external mic.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Static during playback of voice recorded through external mic and mixer

Similar Messages

Maybe you are looking for