Static electric feeling near palm rests on MBP 13" early 2011

i just purchased a MBP 13" early 2011 less than a week ago. when i unplugged the magsafe power connector after full charged, i get this static electric feeling near the palm rest edges (both left and right wrist area). but when i plugged in the magsafe power connector (even though it full charged) I do not get this electro-feeling anymore. is it something wrong with my new MBP 13" ? Should I send in Apple Care Centre for another new set exchange?

I would take it to an Apple Retail Store or an Apple Authorized Service Provider (AASP) for evaluation, or call your nearest Apple Contact Center. Visit the Genius Bar at the Apple Retail Store, make a reservation.

Similar Messages

MBP 15" early 2011 with WDC VelociRaptor?

I notice that there is a thread for MBP 15" early 2011 with SSD https://discussions.apple.com/thread/2775423 But, I can't afford that type of SSD with only that capacity, i.e. 250GB. Here, in town, it would cost nearly USD500.
So, I'm start to thinking to choose WDC VelociRaptor 2,5" 10000rpm 600GB SATA III 6GB/s WD6000BLHX http://www.amazon.com/600GB-Sata-6GB-2-5-HD/dp/B003G4I5OA/ref=sr_1_2?ie=UTF8&qid =1303127766&sr=8-2 which only USD300 with more than 2 times capacity of SSD 510.
I already used VelociRaptor 3,5" 10000rpm 300GB SATA II 3GB/s WD3000HLFS on my PC and it is producing excessive heat, so that I should turning on the HDD fan which has 2500rpm.
The question is: will it produce an excessive heat also? since MBP 15" body is aluminum unibody that is perfect conductor to transfer heat. I saw iFixIt website tear it down piece per piece. So, I think it still do able. But is it compatible also?
thanks.

Hi n,
I would continue working with AppleCare, because if it turns out to be a hardware issue, you'll want to get it repaired while still under warranty.
Have they suggested/have you done a reinstall of the OS yet?

HT201343 My MBP is Early 2011 but dunno why cant use mirroring with apple TV, the icon cannot be found

My MBP is Early 2011 but dunno why cant use mirroring with apple TV, the icon cannot be found. So cannot use mirroring.
I have follow trouble shooting , they recommend to go system preference -> display , thus can find out the mirroring icon if no mean it doesnt support. But according to the web, Early 2011 MBP should be able to use, dunno why.

Just realise I havent updated my OS to mountain lion and this is the reason why I cannot use mirroring before ^^
Thanks all

OS X Lion Screen Sharing Slow on MBP 13" (Early 2011)

Hello All,
I've been cruising forums and various posts, but have not seen anything directly relating to the issue I'm having. I just upgraded all my Macs to Lion and when I screen share(SS) from my lion macs at work to my lion macs at home there has been a notable drop in performance.
Here's where it get's stupid though. I can screen share to my Mini with very little to no lag at all from my MacBook Air at work. The Mini is directly hooked to my time capsule (2008,1TB). However, when I SS into my MBP 13" early 2011(wireless connection) the MBP becomes almost completely unresponsive or delayed to any change by 5+min.
I tried ss'ing into my mini and then from my mini to my MBP 13" and that was at least responsive, but obviously laggy. So what the frick man. Why can't I SS into my MBP from work? This was never an issue when all these macs were running 10.6.8.
I guess I should also mention that the Mini hasn't been able to update ARD 3.5 yet, because of a separate issue that I haven't gotten around to. Is it perhaps the ARD update that is screwing up my MBP13"?
Suggestions are greatly appreciated.

I have the same problem. I think it has to do with the 'server' computer. When I remotely control my other snow leopard computers, it is snappy. When I connect to my iMac running Lion, it is slow. The whole page blinks like it is rendering all text/images/backgrounds all the time. So it seems to be loading the entire frame. On the contrary, when remoted into a Snow Leopard machine, only the word or area that you are typing is blurry, then crisp as it renders. It doesn't try to reload the whole screen since you are only modifying a small portion of it.

I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

You may find this user tip article helpful:
https://discussions.apple.com/docs/DOC-3521
Ciao.

Lion to Snow Leopard MBP 13 Early 2011

GDay guys,
ive bought an used mbp 13 early 2011 and on the recovery hdd is only osx 10.7.5 but ive seen on the apple site that the mbp 13 early 2011 was deliveried with osx 10.6.
is it possible to downgrade or reinstall to snow leopard?
can i download snow leopard anywhere for free or do i have to buy it?

Depends on what version of Snow Leopard came with the computer. Snow Leopard is only available as 10.6.3 on the retail discs. Newer models cannot boot from that version. You would need the original discs which you can purchase from Apple Customer Service.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.
There is no "downgrading." You will have to erase the drive and install Snow Leopard from scratch or create a separate, new partition on the drive on which to install Snow Leopard.

Should I Sleep/Shut Down my Mbp 13" Early 2011 while travelling with motorcycles

Hi
I used Mbp pro Early 2011
Everyday I travel a lot with motorcycle and always take my Mbp with me ..
My questions:
1. What is the best thing to do if I often carry my Mbp on a motorcycle?
2. Should I sleep/shutdown my Mbp while riding my bike?
3. Is it okay if I often shutdown my Mbp or it will decrease the battery life?
I usually shutdown my Mbp each time I'm on the road with bike .. I'm afraid if I just put on sleep it will damage the Mbp because there's a lot of shock happening when you ride a bike
Need advice
Thanks

Hi thanks for your reply but can you be more specific .. I am new with apple thing
Is it okay if I often shutdown the Mbp (2 or 3 times a day) ?.. I travel a lot

Static Electricity feeling when touching Macbook Pro 13

Ive been experiencing a weird static electricity when I touch the laptop whilst its charging and im touching something else metallic connected to a power supply. if I slide my hand along the palm rest it feels like a vibration.

Been there.
Are you using a properly grounded outlet with all of your gear? If not, try that first.
If you are properly grounded, you may find that you have a problem at your physical location with respect to grounding/earthing/bonding and it should be checked out by a qualified electrician as it could be indicative of a dangerous situation.
In my house the problem was a poor earth-neutral bond, and once corrected by my electrician the shocks went away.

MBP 15" early 2011 (MacBookPro8,2) - freeze and 3 beeps after normal boot

Good day.
Month ago I upgraded memory in my MBP early 2011. I bought 2 banks of 4GB Hynix 1333 Mhz(MBP had 2x2GB Hynix banks), installed them and got the first hard freeze with 3 beeps right on the login screen. Since then I got somethink like 15-20 freezes with intervals from 3-4 hours to 1 week and total silence in logs and diagnostic reports.
Note: it boots fine, and freeze occurs during work.
I'm sure it's not a RAM issue because it was tested countless times with AHT, Rember, memtest runned from single user boot, even ASD — all tests passed.
I tried to reproduce the error using Prime95 stress tests, but with no luck — MBP successfully passed 6 hours stress test under 100% CPU and RAM load.
Today MBP freezed 2 times with locked screen and without user activity. Any suggestions?
Additional info:
dmesg - https://gist.github.com/7d3804d11bef38090345
latest log entries right before freeze - https://gist.github.com/c66eaa8c3b08c08c6656
P.S. I'm from Russia, so we don't have AppleCare, only AASPs without needed replacement parts. Also they asks for valid proof of purchase and don't care about Apple ID, serials and stuff.

yumitsu,
3 beeps MEANS its a RAM problem or RAM related problem. There is no doubt about this. Make sure RAM is seated properly. Reseat it if necessary. Also make sure that the DIMM slots don't feel loose as a slight jolt is probably enough to dislodge RAM and make your machine expererience these issues.
Have you tried putting back the original 2 x 2GB RAM that originally shipped with your machine back? If everything starts working normally with the original RAM, then you isolated the issue to the 2 x 4GB Hynix RAM.

Silverlight (Lovefilm / Netflix) MBP 13" Early 2011, Heating and Exhaust Problems, Clamshell mode with TB Display

Hi all
I was hoping if someone can help me out...
I have a:
Mac Book Pro 13" (Early 2011) (i5, Crucial 8GB RAM, 120 OWC 6G SSD)
Apple Thunderbolt Display
I run my MBP in clamshell mode always.
Whenever i run Netflix or Lovefilm video in full screen using either Firefox, Chrome or Safari. The Silverlight plug-in is hogging the CPU.
My exhaust (CPU fan) goes crazy, its soo loud its annoying while your trying to watch a movie on your Thunderbolt Display.
Temperature reaches: 83 Celsius
Fan (Exhaust): 5620 - 6200 RPM (immediately jumps from 2001 to 5620 / 6200)
If i watch a movie full screen on my 13" MBP with my Thunderbolt display disconnected:
Temperature reaches: 81 Celsius
Fan (Exhaust): 3198 RPM (it slowly crawls up form 1998 to 3193)
Now i changed my resolution on my Thunderbolt disply to 1420x720 and it helps with the fans going crazy, they slow down slightly...
I've tried a PRAM and SMC Reset, all my firmware is up to date.
My Macbook Pro is slightly raised at the back so air can flow through the vents.
My FANS are just going crazy!! something is ridicously heating up internally in my machine causing them to go mental.
You just cannot watch a movie on netflix or lovefilm on your thunderbolt display comfortably if your fans go beyound 2800RPM.
I even installed Windows 7 on Virtual Box and tried running lovefilm / silverlight and it did not help my problem.
PLEASE CAN SOMEONE HELP! how can i keep my fans below 2800 RPM while running silverlight?!?!

Flash like Silverlight are CPU heavy applications.
The MacBook Pro can be run in clamshell mode but only when not running extremely CPU intensive tasks
like what you are doing.
If you keep the mac book running this way for too long you might stress the materials and run into danger of getting thermal damages.
Chrome is actually in recent time getting very slow and I noticed in a comparision test that Firefox provides me up to 30 to 40% more free CPU time.
If running netflix I would suggest currently NOT using Chrome.
Windows 7 virtualized inside virtual box and then on top netflix is uhm a pretty bad idea because all those three things together are already CPU hogs.

I have tried many times to install a SSD drive by using optical drive tray, my MBP is early 2011, intel serise 6, checked on webpage, and someone say SSD could be installed on HDD drive, I guess it could be solved by driver, anyone good idea?

Hi, MBP friends, any ideas for this problem? I tried hard and checked the hardware we have, and it hardly to say the problem from hardware, instead I am thinking it could be solved by driver update, or someone who is good on computer language that could help with the problem.
My computer is early 2011, with intel serise 6 and sata 3 acceptable. I dont know why the opitical drive can not support ssd drive instead.
need help, I really dont want to put my SSD driver to HDD driver, and move HDD driver to optical driver.

well, i have got information from website, and it says it will be harmful to hdd driver set in optical area coz there is no vibration protection function.
i have checked the system, and it says the sata speed is the same 6G and chip intel series 6. it should be the same speed, right?
I am thinking that the chip is the same and mortherboard is the same, the cable is similar as well, why it doesnt work? driver issue? OSX issue? or software issue? firmware?
or simply to say, if i am trying to setup two ssd driver into MBP, it has to be one in opitcal driver area. how could work?
thanks... still in puzzle.
right now, i have reinstall the osx into ssd by usb external, and install it back with opitcal tray, however, when i turn on the computer, the system can not be logged in from SSD, and computer can not read SSD driver, and it says it must be formatted or push out.

¿What distribute (Samsung, Toshiba...) mount MBP 13" Early 2011 SSD?

Hi guys
It´s my first post, I usualy reading but never post it because my English It´s very bad only tell in spanish (more or less :))
I don´t know if this cuestion is resolve but I can´t find it
Cuestion:
I want to buy a new MBP Early 2011 13-inch but with SSD disk... I read to internet and don´t find nothing about this SSD fabrication
What 3rd party mount SSDs in this MBP? I read Samsung or Kingston but I don´t know
The oder option (if SSD is bad to read/write speed) is buy de basic MBP (HDD 320Gb) an them unmount original HDD and sustitute to OCZ or OWC SSD... I loss the waranty? It´s recomendaly?
Thx for all!

I´m so sorry: http://www.pccomponentes.com/oczvertex_3_sata3_2_5__ssd120gb.html 2,5" copy/paste very bad
OCZ its for me a good 3rd party, good memory (In me older iMac)
the newer SSDs has a diferent tecnology to TRIM I don´t remenber the name... I´m a little loss to by one sustitute to basic 320 HDD
My work it´s simply, not need the laptop to hard task... I use it to test application and amateur use (MSN, safari, and the other simply things). I think so that need one speed laptop, I´m 2 o 3 external 2,5 HDD 1Tb, no needed more HDD space
Thx

MBP 17" early 2011 keeps freezing randomly

Hello everybody. Im stumbling about an issue after upgrading to Mountain Lion two days ago. The MBP freezes in as far that the spinning disk is showing, the cursor still can be moved around, though I can't get to force quit (not to the Apple nor through the option, alt escape key combiniation). The only thing which will make it work again is to hold down the power button to force a complete shut doown. At the time it happens I'm having Mail running in the background and am using Safari. Anybody else experiencing this? Any ideas of what to do about it? Many thanks for your help

Start up in Safe Mode by powering on the mac while also holding down the 'shift' key until you see the Apple logo with a progress bar underneath it.
When you see the progress bar, let go of the 'shift' key. Log in to your normal account when you get the login screen.
Remove everything from here:
 > System Preferences... Users & Groups | Login Items
Restart the computer normally and test for the problem.

USB memory stick undetected by MBP 13" Early 2011

Hi everybody. I do have a strange behaviour of an MBP 13" with a Kingston DataTraveller 4gb.
The Mac performs well on both USB ports with any other USB device. The Memory stick performs
fine with PCs and other Macs like a G5 or a Macbook Air (thus Intel AND PPC).
I just repartitioned (MBR) and reformatted the memory stick on the G5. Also, I tried using two
different OSX installations (one on an external disk drive)
Mac is using a straight out of the box 10.6.7. It's only 3 weeks old and I didn't change much on the system.
Until a week ago, the USB was flawlessly detected.
Any Idea?
Thanks
Paolo

A G5 and a PowerBook running 10.6.7? Not possible; Snow Leopard is Intel only, those models are PowerPC.
USB sticks vary widely in quality and it's not all that unusual for one to work with some machines and not with others. All you can do is try reformatting on the other computer, and if it still won't work try another brand.
Incidentally, unless you have good reason to use FAT32 (like needing to share with Windows PCs), you may do better to format for Mac; GUID partition table (or APM if it really is a PPC model) and HFS+ (aka Mac OS Extended) file system.

Unexpected shutdown and hibernation (MBP 13 Early 2011)

Hello,
I'm getting a issue with my MacBook Pro :
When my Mac is on standby too long, it goes in what I call "hibernation" mode, meaning by this the mode in which you go when your Mac laptop fully runs out of battery.
My MBP often shutdown when moving it too suddenly.
I tweaked my Mac by replacing the HDD by a SSD and replacing the Superdrive by the HDD. I also changed my 4Gb of 1033 MHz RAM with 16Gb of 1600 MHz RAM.
When the problem started a few weeks ago, I decided to make a clean install of Mac OS. Today, I removed the HDD and replaced it by the Superdrive. The only tweak remaining on my computer is now the 16Gb of RAM.
I already tried PRAM, NVRAM and SMC reset. I have deactivated the SMS (Sudden Motion Sensor).
The problem appears to me to be physical and I am actually thinking about a bad contact. But I hope you'll be able to give me other answers or to deal with mine in depth.
Have a nice day.

I am relatively sure your "tweaks" as you call them caused the problems.
I would take it in to an authorized service facility for diagnosis.
Barry

Static electric feeling near palm rests on MBP 13" early 2011

Similar Messages

Maybe you are looking for